ETEXI
DEF("smp", HAS_ARG, QEMU_OPTION_smp,
- "-smp n[,maxcpus=cpus][,cores=cores][,threads=threads][,sockets=sockets]\n"
+ "-smp [cpus=]n[,maxcpus=cpus][,cores=cores][,threads=threads][,sockets=sockets]\n"
" set the number of CPUs to 'n' [default=1]\n"
" maxcpus= maximum number of total cpus, including\n"
" offline CPUs for hotplug, etc\n"
" sockets= number of discrete sockets in the system\n",
QEMU_ARCH_ALL)
STEXI
-@item -smp @var{n}[,cores=@var{cores}][,threads=@var{threads}][,sockets=@var{sockets}][,maxcpus=@var{maxcpus}]
+@item -smp [cpus=]@var{n}[,cores=@var{cores}][,threads=@var{threads}][,sockets=@var{sockets}][,maxcpus=@var{maxcpus}]
@findex -smp
Simulate an SMP system with @var{n} CPUs. On the PC target, up to 255
CPUs are supported. On Sparc32 target, Linux limits the number of usable CPUs
Allocate guest RAM from a temporarily created file in @var{path}.
ETEXI
-#ifdef MAP_POPULATE
DEF("mem-prealloc", 0, QEMU_OPTION_mem_prealloc,
"-mem-prealloc preallocate guest memory (use with -mem-path)\n",
QEMU_ARCH_ALL)
@findex -mem-prealloc
Preallocate memory when using -mem-path.
ETEXI
-#endif
DEF("k", HAS_ARG, QEMU_OPTION_k,
"-k language use keyboard layout (for example 'fr' for French)\n",
ETEXI
DEF("name", HAS_ARG, QEMU_OPTION_name,
- "-name string1[,process=string2]\n"
+ "-name string1[,process=string2][,debug-threads=on|off]\n"
" set the name of the guest\n"
- " string1 sets the window title and string2 the process name (on Linux)\n",
+ " string1 sets the window title and string2 the process name (on Linux)\n"
+ " When debug-threads is enabled, individual threads are given a separate name (on Linux)\n"
+ " NOTE: The thread names are for debugging and not a stable API.\n",
QEMU_ARCH_ALL)
STEXI
@item -name @var{name}
This name will be displayed in the SDL window caption.
The @var{name} will also be used for the VNC server.
Also optionally set the top visible process name in Linux.
+Naming of individual threads can also be enabled on Linux to aid debugging.
ETEXI
DEF("uuid", HAS_ARG, QEMU_OPTION_uuid,
" [,cache=writethrough|writeback|none|directsync|unsafe][,format=f]\n"
" [,serial=s][,addr=A][,id=name][,aio=threads|native]\n"
" [,readonly=on|off][,copy-on-read=on|off]\n"
- " [[,bps=b]|[[,bps_rd=r][,bps_wr=w]]][[,iops=i]|[[,iops_rd=r][,iops_wr=w]]\n"
+ " [[,bps=b]|[[,bps_rd=r][,bps_wr=w]]]\n"
+ " [[,iops=i]|[[,iops_rd=r][,iops_wr=w]]]\n"
+ " [[,bps_max=bm]|[[,bps_rd_max=rm][,bps_wr_max=wm]]]\n"
+ " [[,iops_max=im]|[[,iops_rd_max=irm][,iops_wr_max=iwm]]]\n"
+ " [[,iops_size=is]]\n"
" use 'file' as a drive image\n", QEMU_ARCH_ALL)
STEXI
@item -drive @var{option}[,@var{option}[,@var{option}[,...]]]
@item cyls=@var{c},heads=@var{h},secs=@var{s}[,trans=@var{t}]
These options have the same definition as they have in @option{-hdachs}.
@item snapshot=@var{snapshot}
-@var{snapshot} is "on" or "off" and allows to enable snapshot for given drive (see @option{-snapshot}).
+@var{snapshot} is "on" or "off" and controls snapshot mode for the given drive
+(see @option{-snapshot}).
@item cache=@var{cache}
@var{cache} is "none", "writeback", "unsafe", "directsync" or "writethrough" and controls how the host cache is used to access block data.
@item aio=@var{aio}
DEF("display", HAS_ARG, QEMU_OPTION_display,
"-display sdl[,frame=on|off][,alt_grab=on|off][,ctrl_grab=on|off]\n"
" [,window_close=on|off]|curses|none|\n"
+ " gtk[,grab_on_hover=on|off]|\n"
" vnc=<display>[,<optargs>]\n"
" select display type\n", QEMU_ARCH_ALL)
STEXI
user. This option differs from the -nographic option in that it
only affects what is done with video output; -nographic also changes
the destination of the serial and parallel port data.
+@item gtk
+Display video output in a GTK window. This interface provides drop-down
+menus and other UI elements to configure and control the VM during
+runtime.
@item vnc
Start a VNC server on display <arg>
@end table
Normally, QEMU uses SDL to display the VGA output. With this option,
you can totally disable graphical output so that QEMU is a simple
command line application. The emulated serial port is redirected on
-the console. Therefore, you can still use QEMU to debug a Linux kernel
-with a serial console.
+the console and muxed with the monitor (unless redirected elsewhere
+explicitly). Therefore, you can still use QEMU to debug a Linux kernel
+with a serial console. Use @key{C-a h} for help on switching between
+the console and monitor.
ETEXI
DEF("curses", 0, QEMU_OPTION_curses,
" [,jpeg-wan-compression=[auto|never|always]]\n"
" [,zlib-glz-wan-compression=[auto|never|always]]\n"
" [,streaming-video=[off|all|filter]][,disable-copy-paste]\n"
- " [,agent-mouse=[on|off]][,playback-compression=[on|off]]\n"
- " [,seamless-migration=[on|off]]\n"
+ " [,disable-agent-file-xfer][,agent-mouse=[on|off]]\n"
+ " [,playback-compression=[on|off]][,seamless-migration=[on|off]]\n"
" enable spice\n"
" at least one of {port, tls-port} is mandatory\n",
QEMU_ARCH_ALL)
@item disable-copy-paste
Disable copy paste between the client and the guest.
+@item disable-agent-file-xfer
+Disable spice-vdagent based file-xfer between the client and the guest.
+
@item tls-port=<nr>
Set the TCP port spice is listening on for encrypted channels.
ETEXI
DEF("vga", HAS_ARG, QEMU_OPTION_vga,
- "-vga [std|cirrus|vmware|qxl|xenfb|none]\n"
+ "-vga [std|cirrus|vmware|qxl|xenfb|tcx|cg3|none]\n"
" select video card type\n", QEMU_ARCH_ALL)
STEXI
@item -vga @var{type}
QXL paravirtual graphic card. It is VGA compatible (including VESA
2.0 VBE support). Works best with qxl guest drivers installed though.
Recommended choice when using the spice protocol.
+@item tcx
+(sun4m only) Sun TCX framebuffer. This is the default framebuffer for
+sun4m machines and offers both 8-bit and 24-bit colour depths at a
+fixed resolution of 1024x768.
+@item cg3
+(sun4m only) Sun cgthree framebuffer. This is a simple 8-bit framebuffer
+for sun4m machines available in both 1024x768 (OpenBIOS) and 1152x900 (OBP)
+resolutions aimed at people wishing to run older Solaris versions.
@item none
Disable VGA card.
@end table
An adaptive encoding will try to detect frequently updated screen regions,
and send updates in these regions using a lossy encoding (like JPEG).
This can be really helpful to save bandwidth when playing videos. Disabling
-adaptive encodings allows to restore the original static behavior of encodings
+adaptive encodings restores the original static behavior of encodings
like Tight.
@item share=[allow-exclusive|force-shared|ignore]
STEXI
@item -no-fd-bootchk
@findex -no-fd-bootchk
-Disable boot signature checking for floppy disks in Bochs BIOS. It may
+Disable boot signature checking for floppy disks in BIOS. May
be needed to boot from old floppy disks.
-TODO: check reference to Bochs BIOS.
ETEXI
DEF("no-acpi", 0, QEMU_OPTION_no_acpi,
" on host and listening for incoming connections on 'socketpath'.\n"
" Use group 'groupname' and mode 'octalmode' to change default\n"
" ownership and permissions for communication port.\n"
+#endif
+#ifdef CONFIG_NETMAP
+ "-net netmap,ifname=name[,devname=nmname]\n"
+ " attach to the existing netmap-enabled network interface 'name', or to a\n"
+ " VALE port (created on the fly) called 'name' ('nmname' is name of the \n"
+ " netmap device, defaults to '/dev/netmap')\n"
#endif
"-net dump[,vlan=n][,file=f][,len=n]\n"
" dump traffic on vlan 'n' to file 'f' (max n bytes per packet)\n"
"bridge|"
#ifdef CONFIG_VDE
"vde|"
+#endif
+#ifdef CONFIG_NETMAP
+ "netmap|"
#endif
"socket|"
"hubport],id=str[,option][,option][,...]\n", QEMU_ARCH_ALL)
If running QEMU as an unprivileged user, use the network helper
@var{helper} to configure the TAP interface. The default network
-helper executable is @file{/usr/local/libexec/qemu-bridge-helper}.
+helper executable is @file{/path/to/qemu-bridge-helper}.
@option{fd}=@var{h} can be used to specify the handle of an already
opened host TAP interface.
#launch a QEMU instance with the default network helper to
#connect a TAP device to bridge br0
qemu-system-i386 linux.img \
- -net nic -net tap,"helper=/usr/local/libexec/qemu-bridge-helper"
+ -net nic -net tap,"helper=/path/to/qemu-bridge-helper"
@end example
@item -netdev bridge,id=@var{id}[,br=@var{bridge}][,helper=@var{helper}]
Use the network helper @var{helper} to configure the TAP interface and
attach it to the bridge. The default network helper executable is
-@file{/usr/local/libexec/qemu-bridge-helper} and the default bridge
+@file{/path/to/qemu-bridge-helper} and the default bridge
device is @file{br0}.
Examples:
"-chardev msmouse,id=id[,mux=on|off]\n"
"-chardev vc,id=id[[,width=width][,height=height]][[,cols=cols][,rows=rows]]\n"
" [,mux=on|off]\n"
- "-chardev memory,id=id[,size=size]\n"
+ "-chardev ringbuf,id=id[,size=size]\n"
"-chardev file,id=id,path=path[,mux=on|off]\n"
"-chardev pipe,id=id,path=path[,mux=on|off]\n"
#ifdef _WIN32
@option{udp},
@option{msmouse},
@option{vc},
-@option{memory},
+@option{ringbuf},
@option{file},
@option{pipe},
@option{console},
@option{cols} and @option{rows} specify that the console be sized to fit a text
console with the given dimensions.
-@item -chardev memory ,id=@var{id} [,size=@var{size}]
+@item -chardev ringbuf ,id=@var{id} [,size=@var{size}]
Create a ring buffer with fixed size @option{size}.
@var{size} must be a power of two, and defaults to @code{64K}).
DEF("iscsi", HAS_ARG, QEMU_OPTION_iscsi,
"-iscsi [user=user][,password=password]\n"
" [,header-digest=CRC32C|CR32C-NONE|NONE-CRC32C|NONE\n"
- " [,initiator-name=iqn]\n"
+ " [,initiator-name=initiator-iqn][,id=target-iqn]\n"
" iSCSI session parameters\n", QEMU_ARCH_ALL)
STEXI
No device is allocated.
@item null
void device
+@item chardev:@var{id}
+Use a named character device defined with the @code{-chardev} option.
@item /dev/XXX
[Linux only] Use host tty, e.g. @file{/dev/ttyS0}. The host serial port
parameters are set according to the emulated ones.
@item mon:@var{dev_string}
This is a special option to allow the monitor to be multiplexed onto
another serial port. The monitor is accessed with key sequence of
-@key{Control-a} and then pressing @key{c}. See monitor access
-@ref{pcsys_keys} in the -nographic section for more keys.
+@key{Control-a} and then pressing @key{c}.
@var{dev_string} should be any one of the serial devices specified
above. An example to multiplex the monitor onto a telnet server
listening on port 4444 would be:
@table @code
@item -serial mon:telnet::4444,server,nowait
@end table
+When the monitor is multiplexed to stdio in this way, Ctrl+C will not terminate
+QEMU any more but will be passed to the guest instead.
@item braille
Braille device. This will use BrlAPI to display the braille output on a real
ETEXI
DEF("mon", HAS_ARG, QEMU_OPTION_mon, \
- "-mon chardev=[name][,mode=readline|control][,default]\n", QEMU_ARCH_ALL)
+ "-mon [chardev=]name[,mode=readline|control][,default]\n", QEMU_ARCH_ALL)
STEXI
-@item -mon chardev=[name][,mode=readline|control][,default]
+@item -mon [chardev=]name[,mode=readline|control][,default]
@findex -mon
Setup monitor on chardev @var{name}.
ETEXI
MS-DOS or Windows. To start at a specific point in time, provide @var{date} in the
format @code{2006-06-17T16:01:21} or @code{2006-06-17}. The default base is UTC.
-By default the RTC is driven by the host system time. This allows to use the
+By default the RTC is driven by the host system time. This allows using of the
RTC as accurate reference clock inside the guest, specifically if the host
time is smoothly following an accurate external reference clock, e.g. via NTP.
If you want to isolate the guest time from the host, you can set @option{clock}
'/objects' path.
ETEXI
+DEF("msg", HAS_ARG, QEMU_OPTION_msg,
+ "-msg timestamp[=on|off]\n"
+ " change the format of messages\n"
+ " on|off controls leading timestamps (default:on)\n",
+ QEMU_ARCH_ALL)
+STEXI
+@item -msg timestamp[=on|off]
+@findex -msg
+prepend a timestamp to each log message.(default:on)
+ETEXI
+
HXCOMM This is the last statement. Insert new options before this line!
STEXI
@end table
projects / lisovros / qemu_apohw.git / blobdiff