--- /dev/null
+/*
+ * CAN device - SJA1000 chip emulation for QEMU
+ *
+ * Copyright (c) 2013-2014 Jin Yang
+ * Copyright (c) 2014 Pavel Pisa
+ *
+ * Initial development supported by Google GSoC 2013 from RTEMS project slot
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+#ifndef HW_CAN_SJA1000_H
+#define HW_CAN_SJA1000_H
+
+#include "can/can_emu.h"
+
+#define CAN_SJA_MEM_SIZE 128
+
+/* The max size for a message buffer, EFF and DLC=8, DS-p39 */
+#define SJA_MSG_MAX_LEN 13
+/* The receive buffer size. */
+#define SJA_RCV_BUF_LEN 64
+
+//#define DEBUG_CAN
+#ifdef DEBUG_CAN
+#define DPRINTF(fmt, ...) \
+ do { fprintf(stderr, "[cansja]: " fmt , ## __VA_ARGS__); } while (0)
+#else
+#define DPRINTF(fmt, ...) \
+ do {} while (0)
+#endif
+
+typedef void (CanSJAIrqRaiseLower)(void *opaque);
+
+typedef struct CanSJA1000State {
+ /* Some registers ... */
+ uint8_t mode; /* PeliCAN, addr 0, Mode register, DS-p26 */
+ /* PeliCAN, addr 1, Command register */
+ uint8_t statusP; /* PeliCAN, addr 2, Status register, p15 */
+ uint8_t interruptP; /* PeliCAN, addr 3, Interrupt register */
+ uint8_t interrupt_en; /* PeliCAN, addr 4, Interrupt Enable register */
+ uint8_t rxmsg_cnt; /* PeliCAN, addr 29, RX message counter. DS-p49 */
+ uint8_t rxbuf_start; /* PeliCAN, addr 30, RX buffer start address register, DS-p49 */
+ uint8_t clock; /* PeliCAN, addr 31, Clock Divider register, DS-p55 */
+
+ uint8_t code_mask[8]; /* PeliCAN, addr 16~23 */
+ uint8_t tx_buff[13]; /* PeliCAN, addr 96~108, transmit buffer */
+ /* BasicCAN, addr 10~19, transmit buffer */
+
+ uint8_t rx_buff[SJA_RCV_BUF_LEN]; /* 32~95, 64bytes */
+ uint32_t rx_ptr; /* Count by bytes. */
+ uint32_t rx_cnt; /* Count by bytes. */
+
+ uint8_t control; /* BasicCAN, addr 0, Control register */
+ /* BasicCAN, addr 1, Command register */
+ uint8_t statusB; /* BasicCAN, addr 2, Status register */
+ uint8_t interruptB; /* BasicCAN, addr 3, Interrupt register */
+ uint8_t code; /* BasicCAN, addr 4, Acceptance code register */
+ uint8_t mask; /* BasicCAN, addr 5, Acceptance mask register */
+
+ qemu_can_filter filter[4];
+
+ QemuMutex rx_lock;
+ CanSJAIrqRaiseLower *irq_raise;
+ CanSJAIrqRaiseLower *irq_lower;
+ void *irq_opaque;
+ CanBusClientState bus_client;
+} CanSJA1000State;
+
+/* PeliCAN mode */
+enum SJA1000_PeliCAN_regs {
+ SJA_MOD = 0x00,
+/* Command register */
+ SJA_CMR = 0x01,
+/* Status register */
+ SJA_SR = 0x02,
+/* Interrupt register */
+ SJA_IR = 0x03,
+/* Interrupt Enable */
+ SJA_IER = 0x04,
+/* Bus Timing register 0 */
+ SJA_BTR0 = 0x06,
+/* Bus Timing register 1 */
+ SJA_BTR1 = 0x07,
+/* Output Control register */
+ SJA_OCR = 0x08,
+/* Arbitration Lost Capture */
+ SJA_ALC = 0x0b,
+/* Error Code Capture */
+ SJA_ECC = 0x0c,
+/* Error Warning Limit */
+ SJA_EWLR = 0x0d,
+/* RX Error Counter */
+ SJA_RXERR = 0x0e,
+/* TX Error Counter */
+ SJA_TXERR0 = 0x0e,
+ SJA_TXERR1 = 0x0f,
+/* Rx Message Counter (number of msgs. in RX FIFO */
+ SJA_RMC = 0x1d,
+/* Rx Buffer Start Addr. (address of current MSG) */
+ SJA_RBSA = 0x1e,
+/* Transmit Buffer (write) Receive Buffer (read) Frame Information */
+ SJA_FRM = 0x10,
+/* ID bytes (11 bits in 0 and 1 or 16 bits in 0,1 and 13 bits in 2,3 (extended)) */
+ SJA_ID0 = 0x11, SJA_ID1 = 0x12,
+/* ID cont. for extended frames */
+ SJA_ID2 = 0x13, SJA_ID3 = 0x14,
+/* Data start standard frame */
+ SJA_DATS = 0x13,
+/* Data start extended frame */
+ SJA_DATE = 0x15,
+/* Acceptance Code (4 bytes) in RESET mode */
+ SJA_ACR0 = 0x10,
+/* Acceptance Mask (4 bytes) in RESET mode */
+ SJA_AMR0 = 0x14,
+/* 4 bytes */
+ SJA_PeliCAN_AC_LEN = 4,
+/* Clock Divider */
+ SJA_CDR = 0x1f
+};
+
+
+/* PeliCAN mode */
+enum SJA1000_BasicCAN_regs {
+ SJA_BCAN_CTR = 0x00,
+/* Command register */
+ SJA_BCAN_CMR = 0x01,
+/* Status register */
+ SJA_BCAN_SR = 0x02,
+/* Interrupt register */
+ SJA_BCAN_IR = 0x03
+};
+
+void can_sja_hardware_reset(CanSJA1000State *s);
+void can_sja_mem_write(CanSJA1000State *s, hwaddr addr, uint64_t val, unsigned size);
+uint64_t can_sja_mem_read(CanSJA1000State *s, hwaddr addr, unsigned size);
+int can_sja_connect_to_bus(CanSJA1000State *s, CanBusState *bus);
+void can_sja_disconnect(CanSJA1000State *s);
+int can_sja_init(CanSJA1000State *s, CanSJAIrqRaiseLower *irq_raise,
+ CanSJAIrqRaiseLower *irq_lower, void *irq_opaque);
+void can_sja_exit(CanSJA1000State *s);
+
+int can_sja_can_receive(CanBusClientState *client);
+ssize_t can_sja_receive(CanBusClientState *client, const qemu_can_frame *frames, size_t frames_cnt);
+
+extern const VMStateDescription vmstate_can_sja;
+
+#endif
projects / lisovros / qemu_apohw.git / blobdiff