apohw: update for actual FPGA design.

[lisovros/qemu_apohw.git] / qerror.c

diff --git a/qerror.c b/qerror.c
index 8e30e2dc1e251ac1d486d35588cdff1aa4295814..637eca793c1fe1a134440240e6d30efdbbe3c1e7 100644 (file)
--- a/qerror.c
+++ b/qerror.c
@@ -40,22 +40,37 @@ static const QType qerror_type = {
  * "running out of foo: %(foo)%%"
  *
  * Please keep the entries in alphabetical order.
- * Use "sed -n '/^static.*qerror_table\[\]/,/^};/s/QERR_/&/gp' qerror.c | sort -c"
- * to check.
+ * Use scripts/check-qerror.sh to check.
  */
 static const QErrorStringTable qerror_table[] = {
+    {
+        .error_fmt = QERR_ADD_CLIENT_FAILED,
+        .desc      = "Could not add client",
+    },
     {
         .error_fmt = QERR_BAD_BUS_FOR_DEVICE,
         .desc      = "Device '%(device)' can't go on a %(bad_bus_type) bus",
     },
     {
-        .error_fmt = QERR_BUS_NOT_FOUND,
-        .desc      = "Bus '%(bus)' not found",
+        .error_fmt = QERR_BASE_NOT_FOUND,
+        .desc      = "Base '%(base)' not found",
+    },
+    {
+        .error_fmt = QERR_BLOCK_FORMAT_FEATURE_NOT_SUPPORTED,
+        .desc      = "Block format '%(format)' used by device '%(name)' does not support feature '%(feature)'",
     },
     {
         .error_fmt = QERR_BUS_NO_HOTPLUG,
         .desc      = "Bus '%(bus)' does not support hotplugging",
     },
+    {
+        .error_fmt = QERR_BUS_NOT_FOUND,
+        .desc      = "Bus '%(bus)' not found",
+    },
+    {
+        .error_fmt = QERR_COMMAND_DISABLED,
+        .desc      = "The command %(name) has been disabled for this instance",
+    },
     {
         .error_fmt = QERR_COMMAND_NOT_FOUND,
         .desc      = "The command %(name) has not been found",
@@ -64,6 +79,14 @@ static const QErrorStringTable qerror_table[] = {
         .error_fmt = QERR_DEVICE_ENCRYPTED,
         .desc      = "Device '%(device)' is encrypted",
     },
+    {
+        .error_fmt = QERR_DEVICE_FEATURE_BLOCKS_MIGRATION,
+        .desc      = "Migration is disabled when using feature '%(feature)' in device '%(device)'",
+    },
+    {
+        .error_fmt = QERR_DEVICE_HAS_NO_MEDIUM,
+        .desc      = "Device '%(device)' has no medium",
+    },
     {
         .error_fmt = QERR_DEVICE_INIT_FAILED,
         .desc      = "Device '%(device)' could not be initialized",
@@ -73,8 +96,8 @@ static const QErrorStringTable qerror_table[] = {
         .desc      = "Device '%(device)' is in use",
     },
     {
-        .error_fmt = QERR_DEVICE_FEATURE_BLOCKS_MIGRATION,
-        .desc      = "Migration is disabled when using feature '%(feature)' in device '%(device)'",
+        .error_fmt = QERR_DEVICE_IS_READ_ONLY,
+        .desc      = "Device '%(device)' is read only",
     },
     {
         .error_fmt = QERR_DEVICE_LOCKED,
@@ -84,6 +107,14 @@ static const QErrorStringTable qerror_table[] = {
         .error_fmt = QERR_DEVICE_MULTIPLE_BUSSES,
         .desc      = "Device '%(device)' has multiple child busses",
     },
+    {
+        .error_fmt = QERR_DEVICE_NO_BUS,
+        .desc      = "Device '%(device)' has no child bus",
+    },
+    {
+        .error_fmt = QERR_DEVICE_NO_HOTPLUG,
+        .desc      = "Device '%(device)' does not support hotplugging",
+    },
     {
         .error_fmt = QERR_DEVICE_NOT_ACTIVE,
         .desc      = "Device '%(device)' has not been activated",
@@ -100,14 +131,6 @@ static const QErrorStringTable qerror_table[] = {
         .error_fmt = QERR_DEVICE_NOT_REMOVABLE,
         .desc      = "Device '%(device)' is not removable",
     },
-    {
-        .error_fmt = QERR_DEVICE_NO_BUS,
-        .desc      = "Device '%(device)' has no child bus",
-    },
-    {
-        .error_fmt = QERR_DEVICE_NO_HOTPLUG,
-        .desc      = "Device '%(device)' does not support hotplugging",
-    },
     {
         .error_fmt = QERR_DUPLICATE_ID,
         .desc      = "Duplicate ID '%(id)' for %(object)",
@@ -132,6 +155,10 @@ static const QErrorStringTable qerror_table[] = {
         .error_fmt = QERR_INVALID_PARAMETER,
         .desc      = "Invalid parameter '%(name)'",
     },
+    {
+        .error_fmt = QERR_INVALID_PARAMETER_COMBINATION,
+        .desc      = "Invalid parameter combination",
+    },
     {
         .error_fmt = QERR_INVALID_PARAMETER_TYPE,
         .desc      = "Invalid parameter type, expected: %(expected)",
@@ -145,14 +172,18 @@ static const QErrorStringTable qerror_table[] = {
         .desc      = "Password incorrect",
     },
     {
-        .error_fmt = QERR_JSON_PARSING,
-        .desc      = "Invalid JSON syntax",
+        .error_fmt = QERR_IO_ERROR,
+        .desc      = "An IO error has occurred",
     },
     {
         .error_fmt = QERR_JSON_PARSE_ERROR,
         .desc      = "JSON parse error, %(message)",
 
     },
+    {
+        .error_fmt = QERR_JSON_PARSING,
+        .desc      = "Invalid JSON syntax",
+    },
     {
         .error_fmt = QERR_KVM_MISSING_CAP,
         .desc      = "Using KVM without %(capability), %(feature) unavailable",
@@ -169,10 +200,18 @@ static const QErrorStringTable qerror_table[] = {
         .error_fmt = QERR_NO_BUS_FOR_DEVICE,
         .desc      = "No '%(bus)' bus found for device '%(device)'",
     },
+    {
+        .error_fmt = QERR_NOT_SUPPORTED,
+        .desc      = "Not supported",
+    },
     {
         .error_fmt = QERR_OPEN_FILE_FAILED,
         .desc      = "Could not open '%(filename)'",
     },
+    {
+        .error_fmt = QERR_PERMISSION_DENIED,
+        .desc      = "Insufficient permission to perform this operation",
+    },
     {
         .error_fmt = QERR_PROPERTY_NOT_FOUND,
         .desc      = "Property '%(device).%(property)' not found",
@@ -189,6 +228,19 @@ static const QErrorStringTable qerror_table[] = {
         .error_fmt = QERR_PROPERTY_VALUE_NOT_FOUND,
         .desc      = "Property '%(device).%(property)' can't find value '%(value)'",
     },
+    {
+        .error_fmt = QERR_PROPERTY_VALUE_OUT_OF_RANGE,
+        .desc      = "Property '%(device).%(property)' doesn't take "
+                     "value %(value) (minimum: %(min), maximum: %(max)'",
+    },
+    {
+        .error_fmt = QERR_QGA_COMMAND_FAILED,
+        .desc      = "Guest agent command failed, error was '%(message)'",
+    },
+    {
+        .error_fmt = QERR_QGA_LOGGING_FAILED,
+        .desc      = "Guest agent failed to log non-optional log statement",
+    },
     {
         .error_fmt = QERR_QMP_BAD_INPUT_OBJECT,
         .desc      = "Expected '%(expected)' in QMP input",
@@ -209,21 +261,13 @@ static const QErrorStringTable qerror_table[] = {
         .error_fmt = QERR_SET_PASSWD_FAILED,
         .desc      = "Could not set password",
     },
-    {
-        .error_fmt = QERR_ADD_CLIENT_FAILED,
-        .desc      = "Could not add client",
-    },
     {
         .error_fmt = QERR_TOO_MANY_FILES,
         .desc      = "Too many open files",
     },
     {
         .error_fmt = QERR_UNDEFINED_ERROR,
-        .desc      = "An undefined error has ocurred",
-    },
-    {
-        .error_fmt = QERR_UNSUPPORTED,
-        .desc      = "this feature or command is not currently supported",
+        .desc      = "An undefined error has occurred",
     },
     {
         .error_fmt = QERR_UNKNOWN_BLOCK_FORMAT_FEATURE,
@@ -231,16 +275,17 @@ static const QErrorStringTable qerror_table[] = {
                      "supported by this qemu version: %(feature)",
     },
     {
-        .error_fmt = QERR_VNC_SERVER_FAILED,
-        .desc      = "Could not start VNC server on %(target)",
+        .error_fmt = QERR_UNSUPPORTED,
+        .desc      = "this feature or command is not currently supported",
     },
     {
-        .error_fmt = QERR_QGA_LOGGING_FAILED,
-        .desc      = "Guest agent failed to log non-optional log statement",
+        .error_fmt = QERR_VIRTFS_FEATURE_BLOCKS_MIGRATION,
+        .desc      = "Migration is disabled when VirtFS export path '%(path)' "
+                     "is mounted in the guest using mount_tag '%(tag)'",
     },
     {
-        .error_fmt = QERR_QGA_COMMAND_FAILED,
-        .desc      = "Guest agent command failed, error was '%(message)'",
+        .error_fmt = QERR_VNC_SERVER_FAILED,
+        .desc      = "Could not start VNC server on %(target)",
     },
     {}
 };