From 2f47690ed42a85820783dee7f16ae47edadf8fad Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Fri, 23 Jan 2009 11:40:22 -0600 Subject: [PATCH] rtl8187: Fix driver to return TX retry info for RTL8187L MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit Current code for the RTL8187 is not returning valid retry information, thus the rate-setting mechanism is not functioning. As a further complication, this info is only obtained by reading a register, which cannot be read while in interrupt context. This patch implements the TX status return to mac80211 through the use of a work queue. One additional problem is that the driver currently enables the rate fallback mechanism of the device, which conflicts with the mac80211 rate-setting algorithm. This version of the patch disables rate fallback. Signed-off-by: Larry Finger Tested-by: Herton Ronaldo Krzesinski Tested-by: Martín Ernesto Barreyro Acked-by: Hin-Tak Leung Signed-off-by: John W. Linville --- drivers/net/wireless/rtl818x/rtl8187.h | 4 +- drivers/net/wireless/rtl818x/rtl8187_dev.c | 73 ++++++++++++++++------ 2 files changed, 58 insertions(+), 19 deletions(-) diff --git a/drivers/net/wireless/rtl818x/rtl8187.h b/drivers/net/wireless/rtl818x/rtl8187.h index 3b1e1c2aad2..9718f61809c 100644 --- a/drivers/net/wireless/rtl818x/rtl8187.h +++ b/drivers/net/wireless/rtl818x/rtl8187.h @@ -100,6 +100,8 @@ struct rtl8187_priv { struct usb_device *udev; u32 rx_conf; struct usb_anchor anchored; + struct delayed_work work; + struct ieee80211_hw *dev; u16 txpwr_base; u8 asic_rev; u8 is_rtl8187b; @@ -117,7 +119,7 @@ struct rtl8187_priv { struct { __le64 buf; struct sk_buff_head queue; - } b_tx_status; + } b_tx_status; /* This queue is used by both -b and non-b devices */ }; void rtl8187_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data); diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c index db7318d1d40..82bd47e7c61 100644 --- a/drivers/net/wireless/rtl818x/rtl8187_dev.c +++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c @@ -177,25 +177,33 @@ static void rtl8187_tx_cb(struct urb *urb) sizeof(struct rtl8187_tx_hdr)); ieee80211_tx_info_clear_status(info); - if (!urb->status && - !(info->flags & IEEE80211_TX_CTL_NO_ACK) && - priv->is_rtl8187b) { - skb_queue_tail(&priv->b_tx_status.queue, skb); + if (!(urb->status) && !(info->flags & IEEE80211_TX_CTL_NO_ACK)) { + if (priv->is_rtl8187b) { + skb_queue_tail(&priv->b_tx_status.queue, skb); - /* queue is "full", discard last items */ - while (skb_queue_len(&priv->b_tx_status.queue) > 5) { - struct sk_buff *old_skb; + /* queue is "full", discard last items */ + while (skb_queue_len(&priv->b_tx_status.queue) > 5) { + struct sk_buff *old_skb; - dev_dbg(&priv->udev->dev, - "transmit status queue full\n"); + dev_dbg(&priv->udev->dev, + "transmit status queue full\n"); - old_skb = skb_dequeue(&priv->b_tx_status.queue); - ieee80211_tx_status_irqsafe(hw, old_skb); - } - } else { - if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) && !urb->status) + old_skb = skb_dequeue(&priv->b_tx_status.queue); + ieee80211_tx_status_irqsafe(hw, old_skb); + } + return; + } else { info->flags |= IEEE80211_TX_STAT_ACK; + } + } + if (priv->is_rtl8187b) ieee80211_tx_status_irqsafe(hw, skb); + else { + /* Retry information for the RTI8187 is only available by + * reading a register in the device. We are in interrupt mode + * here, thus queue the skb and finish on a work queue. */ + skb_queue_tail(&priv->b_tx_status.queue, skb); + queue_delayed_work(hw->workqueue, &priv->work, 0); } } @@ -645,7 +653,7 @@ static int rtl8187_init_hw(struct ieee80211_hw *dev) rtl818x_iowrite32(priv, &priv->map->INT_TIMEOUT, 0); rtl818x_iowrite8(priv, &priv->map->WPA_CONF, 0); - rtl818x_iowrite8(priv, &priv->map->RATE_FALLBACK, 0x81); + rtl818x_iowrite8(priv, &priv->map->RATE_FALLBACK, 0); // TODO: set RESP_RATE and BRSR properly rtl818x_iowrite8(priv, &priv->map->RESP_RATE, (8 << 4) | 0); @@ -765,9 +773,6 @@ static int rtl8187b_init_hw(struct ieee80211_hw *dev) rtl818x_iowrite8(priv, &priv->map->TX_AGC_CTL, reg); rtl818x_iowrite16_idx(priv, (__le16 *)0xFFE0, 0x0FFF, 1); - reg = rtl818x_ioread8(priv, &priv->map->RATE_FALLBACK); - reg |= RTL818X_RATE_FALLBACK_ENABLE; - rtl818x_iowrite8(priv, &priv->map->RATE_FALLBACK, reg); rtl818x_iowrite16(priv, &priv->map->BEACON_INTERVAL, 100); rtl818x_iowrite16(priv, &priv->map->ATIM_WND, 2); @@ -855,6 +860,34 @@ static int rtl8187b_init_hw(struct ieee80211_hw *dev) return 0; } +static void rtl8187_work(struct work_struct *work) +{ + /* The RTL8187 returns the retry count through register 0xFFFA. In + * addition, it appears to be a cumulative retry count, not the + * value for the current TX packet. When multiple TX entries are + * queued, the retry count will be valid for the last one in the queue. + * The "error" should not matter for purposes of rate setting. */ + struct rtl8187_priv *priv = container_of(work, struct rtl8187_priv, + work.work); + struct ieee80211_tx_info *info; + struct ieee80211_hw *dev = priv->dev; + static u16 retry; + u16 tmp; + + mutex_lock(&priv->conf_mutex); + tmp = rtl818x_ioread16(priv, (__le16 *)0xFFFA); + while (skb_queue_len(&priv->b_tx_status.queue) > 0) { + struct sk_buff *old_skb; + + old_skb = skb_dequeue(&priv->b_tx_status.queue); + info = IEEE80211_SKB_CB(old_skb); + info->status.rates[0].count = tmp - retry + 1; + ieee80211_tx_status_irqsafe(dev, old_skb); + } + retry = tmp; + mutex_unlock(&priv->conf_mutex); +} + static int rtl8187_start(struct ieee80211_hw *dev) { struct rtl8187_priv *priv = dev->priv; @@ -869,6 +902,7 @@ static int rtl8187_start(struct ieee80211_hw *dev) mutex_lock(&priv->conf_mutex); init_usb_anchor(&priv->anchored); + priv->dev = dev; if (priv->is_rtl8187b) { reg = RTL818X_RX_CONF_MGMT | @@ -936,6 +970,7 @@ static int rtl8187_start(struct ieee80211_hw *dev) reg |= RTL818X_CMD_TX_ENABLE; reg |= RTL818X_CMD_RX_ENABLE; rtl818x_iowrite8(priv, &priv->map->CMD, reg); + INIT_DELAYED_WORK(&priv->work, rtl8187_work); mutex_unlock(&priv->conf_mutex); return 0; @@ -966,6 +1001,8 @@ static void rtl8187_stop(struct ieee80211_hw *dev) dev_kfree_skb_any(skb); usb_kill_anchored_urbs(&priv->anchored); + if (!priv->is_rtl8187b) + cancel_delayed_work_sync(&priv->work); mutex_unlock(&priv->conf_mutex); } -- 2.39.2