+/*****************************************
+ * sllin message helper routines
+ *****************************************/
+void sllin_report_error(struct sllin *sl, int err)
+{
+ sllin_send_canfr(sl, 0 | CAN_EFF_FLAG |
+ (err & ~SLLIN_ID_MASK), NULL, 0);
+}
+
+static int sllin_configure_frame_cache(struct sllin *sl, struct can_frame *cf)
+{
+ struct sllin_conf_entry *sce;
+ if (!(cf->can_id & SLLIN_LIN_ID_CONF))
+ return -1;
+
+ sce = &sl->linfr_cache[cf->can_id & SLLIN_ID_MASK];
+ pr_debug("sllin: Setting frame cache with EFF CAN frame. "
+ "LIN ID = %d\n", cf->can_id & SLLIN_ID_MASK);
+
+ sce->dlc = cf->can_dlc;
+ if (sce->dlc > SLLIN_DATA_MAX)
+ sce->dlc = SLLIN_DATA_MAX;
+
+ sce->frame_fl = (cf->can_id & ~SLLIN_ID_MASK) & CAN_EFF_MASK;
+ memcpy(sce->data, cf->data, cf->can_dlc);
+
+ return 0;
+}
+
+static inline unsigned sllin_checksum(unsigned char *data, int length, int enhanced_fl)
+{
+ unsigned csum = 0;
+ int i;
+
+ if (enhanced_fl) {
+ i = SLLIN_BUFF_ID;
+ } else {
+ i = SLLIN_BUFF_DATA;
+ }
+
+ for (; i < length; i++) {
+ csum += data[i];
+ if (csum > 255)
+ csum -= 255;
+ }
+
+ return ~csum & 0xff;
+}
+
+#define SLLIN_STPMSG_RESPONLY (1) /* Message will be LIN Response only */
+#define SLLIN_STPMSG_CHCKSUM_CLS (1 << 1)
+#define SLLIN_STPMSG_CHCKSUM_ENH (1 << 2)
+
+int sllin_setup_msg(struct sllin *sl, int mode, int id,
+ unsigned char *data, int len)
+{
+ if (id > SLLIN_ID_MASK)
+ return -1;
+
+ if (!(mode & SLLIN_STPMSG_RESPONLY)) {
+ sl->rx_cnt = 0;
+ sl->tx_cnt = 0;
+ sl->rx_expect = 0;
+ sl->rx_lim = SLLIN_BUFF_LEN;
+ }
+
+ sl->tx_buff[SLLIN_BUFF_BREAK] = 0;
+ sl->tx_buff[SLLIN_BUFF_SYNC] = 0x55;
+ sl->tx_buff[SLLIN_BUFF_ID] = id | sllin_id_parity_table[id];
+ sl->tx_lim = SLLIN_BUFF_DATA;
+
+ if ((data != NULL) && len) {
+ sl->tx_lim += len;
+ memcpy(sl->tx_buff + SLLIN_BUFF_DATA, data, len);
+ sl->tx_buff[sl->tx_lim++] = sllin_checksum(sl->tx_buff,
+ sl->tx_lim, mode & SLLIN_STPMSG_CHCKSUM_ENH);
+ }
+ if (len != 0)
+ sl->rx_lim = SLLIN_BUFF_DATA + len + 1;
+
+ return 0;
+}
+
+
+int sllin_send_tx_buff(struct sllin *sl)
+{
+ struct tty_struct *tty = sl->tty;
+ int remains;
+ int res;
+
+#ifdef BREAK_BY_BAUD
+ if (sl->lin_state != SLSTATE_BREAK_SENT)
+ remains = sl->tx_lim - sl->tx_cnt;
+ else
+ remains = 1;
+#else
+ remains = sl->tx_lim - sl->tx_cnt;
+#endif
+
+ res = tty->ops->write(tty, sl->tx_buff + sl->tx_cnt, remains);
+ if (res < 0)
+ return -1;
+
+ remains -= res;
+ sl->tx_cnt += res;
+
+ if (remains > 0) {
+ set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
+ res = tty->ops->write(tty, sl->tx_buff + sl->tx_cnt, remains);
+ if (res < 0) {
+ clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
+ return -1;
+ }
+
+ remains -= res;
+ sl->tx_cnt += res;
+ }
+
+ pr_debug("sllin: sllin_send_tx_buff sent %d, remains %d\n",
+ sl->tx_cnt, remains);
+
+ return 0;
+}
+
+#ifdef BREAK_BY_BAUD
+int sllin_send_break(struct sllin *sl)
+{
+ struct tty_struct *tty = sl->tty;
+ unsigned long break_baud;
+ int res;
+
+ break_baud = ((sl->lin_baud * 2) / 3);
+ sltty_change_speed(tty, break_baud);
+
+ tty->ops->flush_buffer(tty);
+ sl->rx_cnt = SLLIN_BUFF_BREAK;
+
+ sl->rx_expect = SLLIN_BUFF_BREAK + 1;
+ sl->lin_state = SLSTATE_BREAK_SENT;
+
+ res = sllin_send_tx_buff(sl);
+ if (res < 0) {
+ sl->lin_state = SLSTATE_IDLE;
+ return res;
+ }
+
+ return 0;
+}
+#else /* BREAK_BY_BAUD */
+
+int sllin_send_break(struct sllin *sl)
+{
+ struct tty_struct *tty = sl->tty;
+ int retval;
+ unsigned long break_baud;
+ unsigned long usleep_range_min;
+ unsigned long usleep_range_max;
+
+ break_baud = ((sl->lin_baud * 2) / 3);
+ sl->rx_cnt = SLLIN_BUFF_BREAK;
+ sl->rx_expect = SLLIN_BUFF_BREAK + 1;
+ sl->lin_state = SLSTATE_BREAK_SENT;
+
+ /* Do the break ourselves; Inspired by
+ http://lxr.linux.no/#linux+v3.1.2/drivers/tty/tty_io.c#L2452 */
+ retval = tty->ops->break_ctl(tty, -1);
+ if (retval)
+ return retval;
+
+ //udelay(712);
+ usleep_range_min = (1000000l * SLLIN_SAMPLES_PER_CHAR) / break_baud;
+ usleep_range_max = usleep_range_min + 50;
+ usleep_range(usleep_range_min, usleep_range_max);
+
+ retval = tty->ops->break_ctl(tty, 0);
+ usleep_range_min = (1000000l * 1 /* 1 bit */) / break_baud;
+ usleep_range_max = usleep_range_min + 30;
+ usleep_range(usleep_range_min, usleep_range_max);
+
+ tty->ops->flush_buffer(tty);
+
+ sl->tx_cnt = SLLIN_BUFF_SYNC;
+
+ pr_debug("sllin: Break sent.\n");
+ set_bit(SLF_RXEVENT, &sl->flags);
+ wake_up(&sl->kwt_wq);
+
+ return 0;
+}
+#endif /* BREAK_BY_BAUD */
+
+
+static enum hrtimer_restart sllin_rx_timeout_handler(struct hrtimer *hrtimer)
+{
+ struct sllin *sl = container_of(hrtimer, struct sllin, rx_timer);
+
+ sllin_report_error(sl, SLLIN_ERR_RX_TIMEOUT);
+ set_bit(SLF_TMOUTEVENT, &sl->flags);
+ wake_up(&sl->kwt_wq);
+
+ return HRTIMER_NORESTART;
+}
+
+static int sllin_rx_validate(struct sllin *sl)
+{
+ int actual_id;
+ int ext_chcks_fl;
+ int lin_dlc;
+ unsigned char rec_chcksm = sl->rx_buff[sl->rx_cnt - 1];
+ struct sllin_conf_entry *scf;
+
+ actual_id = sl->rx_buff[SLLIN_BUFF_ID] & SLLIN_ID_MASK;
+ scf = &sl->linfr_cache[actual_id];
+ lin_dlc = scf->dlc;
+ ext_chcks_fl = scf->frame_fl & SLLIN_CHECKSUM_EXTENDED;
+
+ if (sllin_checksum(sl->rx_buff, sl->rx_cnt - 1, ext_chcks_fl) !=
+ rec_chcksm) {
+
+ /* Type of checksum is configured for particular frame */
+ if (lin_dlc > 0) {
+ return -1;
+ } else {
+ if (sllin_checksum(sl->rx_buff, sl->rx_cnt - 1,
+ !ext_chcks_fl) != rec_chcksm) {
+ return -1;
+ }
+ }
+ }
+
+ return 0;
+}
+