]>
rtime.felk.cvut.cz Git - linux-conf-perf.git/log
Karel Kočí [Wed, 20 May 2015 09:06:43 +0000 (11:06 +0200)]
Fix Makefile clean
Karel Kočí [Mon, 18 May 2015 11:21:07 +0000 (13:21 +0200)]
Make nbscript not generated
Karel Kočí [Sat, 16 May 2015 13:30:02 +0000 (15:30 +0200)]
Set root Makefile to start evaluate script
Karel Kočí [Sat, 16 May 2015 13:20:36 +0000 (15:20 +0200)]
Fix NoAppliableSolution in loop and changed looping phase
Karel Kočí [Sat, 16 May 2015 13:13:50 +0000 (15:13 +0200)]
Divide evaluete script to functions
Karel Kočí [Sat, 16 May 2015 12:32:32 +0000 (14:32 +0200)]
Implement evaluate
Karel Kočí [Fri, 15 May 2015 10:49:45 +0000 (12:49 +0200)]
Add result folder to .gitignore
Karel Kočí [Thu, 14 May 2015 23:38:34 +0000 (01:38 +0200)]
Rewrite write_config solution check and fix apply
solution.apply failed in case of last solution.
Karel Kočí [Thu, 14 May 2015 20:51:15 +0000 (22:51 +0200)]
Fix error in utils script
Karel Kočí [Thu, 14 May 2015 20:49:23 +0000 (22:49 +0200)]
Fix error in solution apply
Karel Kočí [Thu, 14 May 2015 20:46:43 +0000 (22:46 +0200)]
Fix solution generation in case of gen_all_solution_oninit
Karel Kočí [Thu, 14 May 2015 20:41:26 +0000 (22:41 +0200)]
Ezecute initialize parse_kconfig only in case of missing files
Karel Kočí [Thu, 14 May 2015 15:37:53 +0000 (17:37 +0200)]
Add dot_config to gitignore
Karel Kočí [Thu, 14 May 2015 15:37:18 +0000 (17:37 +0200)]
Fix booting process and test target
Test target wasn't working properly. Now it should work.
Karel Kočí [Thu, 14 May 2015 15:35:48 +0000 (17:35 +0200)]
Clean makefile and remove dependency on buildroot initram
Removing dependency can lead to problems.
But if buildroot should not be forced for possible alternatives.
Karel Kočí [Thu, 14 May 2015 13:20:34 +0000 (15:20 +0200)]
Fix problems with permute
Permute should now reading and loading configurations right.
In case of configuration change, forces save.
Karel Kočí [Thu, 14 May 2015 08:50:34 +0000 (10:50 +0200)]
Fix problems with configurations genration
Karel Kočí [Wed, 13 May 2015 17:49:33 +0000 (19:49 +0200)]
Add mpermute target for executing command permute
Karel Kočí [Wed, 13 May 2015 16:46:36 +0000 (18:46 +0200)]
Add kernel_env setting
Karel Kočí [Wed, 13 May 2015 16:16:13 +0000 (18:16 +0200)]
Swap some lines in conf.py
Karel Kočí [Wed, 13 May 2015 16:04:36 +0000 (18:04 +0200)]
Fix conf.py
Karel Kočí [Wed, 13 May 2015 16:00:57 +0000 (18:00 +0200)]
Fix ARCH env variable
Karel Kočí [Wed, 13 May 2015 15:56:44 +0000 (17:56 +0200)]
Fix env
Karel Kočí [Sun, 10 May 2015 14:03:15 +0000 (16:03 +0200)]
Add initialize messages and initialize sourcing from dot_config not from linux/.config
Karel Kočí [Sun, 10 May 2015 14:02:25 +0000 (16:02 +0200)]
Add saving and loading of dot_config file in permute program
Karel Kočí [Sun, 10 May 2015 14:01:02 +0000 (16:01 +0200)]
Fix buildroot Makefile dependency
Karel Kočí [Thu, 7 May 2015 11:34:33 +0000 (13:34 +0200)]
permute fix makefile
Karel Kočí [Thu, 7 May 2015 11:33:40 +0000 (13:33 +0200)]
Add permute to root Makefile
Karel Kočí [Thu, 7 May 2015 11:31:09 +0000 (13:31 +0200)]
Rename setpermute to permute
Karel Kočí [Wed, 6 May 2015 09:55:16 +0000 (11:55 +0200)]
Add initial implementation of setpermute
Karel Kočí [Thu, 7 May 2015 11:25:04 +0000 (13:25 +0200)]
Add implementation of hash indexing of configurations
Karel Kočí [Thu, 7 May 2015 11:20:04 +0000 (13:20 +0200)]
Add gitignores
Karel Kočí [Wed, 6 May 2015 19:57:33 +0000 (21:57 +0200)]
Rename build folder to jobfiles
Karel Kočí [Wed, 6 May 2015 19:18:38 +0000 (21:18 +0200)]
Add generation of all solutions in initialization phase
Karel Kočí [Wed, 6 May 2015 19:17:23 +0000 (21:17 +0200)]
Add possibility of calling pahe_set from outside of loop.py
Karel Kočí [Wed, 6 May 2015 19:16:18 +0000 (21:16 +0200)]
Add Makefile initialize dependencies
Karel Kočí [Wed, 6 May 2015 15:28:39 +0000 (17:28 +0200)]
Fix some comments and if in solution
These changes were forgotten after change from minisat to picosat
Karel Kočí [Wed, 6 May 2015 15:20:32 +0000 (17:20 +0200)]
Add label for debugging configs
Karel Kočí [Wed, 6 May 2015 15:12:48 +0000 (17:12 +0200)]
Add PHONY targets
Karel Kočí [Wed, 6 May 2015 15:12:15 +0000 (17:12 +0200)]
Change message in generated nbscript
Karel Kočí [Wed, 6 May 2015 15:10:38 +0000 (17:10 +0200)]
Move buildroot configs in conf.py
Karel Kočí [Wed, 6 May 2015 15:10:16 +0000 (17:10 +0200)]
Separate initialisation
Initialisation now can be executed without loop it self.
Karel Kočí [Wed, 6 May 2015 15:08:30 +0000 (17:08 +0200)]
Remove automatic initram build
Not initram must be set and created manually by user.
Karel Kočí [Wed, 6 May 2015 09:56:19 +0000 (11:56 +0200)]
Move buildroot submodule
Karel Kočí [Tue, 5 May 2015 15:41:23 +0000 (17:41 +0200)]
Replace minisat with picosat
Picosat is distributed with this project.
Karel Kočí [Tue, 5 May 2015 10:01:07 +0000 (12:01 +0200)]
Add gitignore for picosat
Karel Kočí [Tue, 5 May 2015 09:58:26 +0000 (11:58 +0200)]
Add picosat version 959
Karel Kočí [Tue, 5 May 2015 09:45:40 +0000 (11:45 +0200)]
Add minisat config
Karel Kočí [Tue, 5 May 2015 09:22:50 +0000 (11:22 +0200)]
parse_kconfig fix problems with choice configs
Choice configs has now own boolean expression.
Also fixing problem with i variable. That causes that for some variables no cfn equations were build.
Karel Kočí [Mon, 4 May 2015 20:50:48 +0000 (22:50 +0200)]
Small change in parse_kconfig Makefile
Hide warnings. I am not going to solve them now.
Karel Kočí [Mon, 4 May 2015 20:49:05 +0000 (22:49 +0200)]
Karel Kočí [Mon, 4 May 2015 20:47:53 +0000 (22:47 +0200)]
parse_kconfig change module decode value
In case of default value are modules taken as yes in case of boolean.
Karel Kočí [Mon, 4 May 2015 20:47:00 +0000 (22:47 +0200)]
Add some configuration options and clean write_conf
Karel Kočí [Mon, 4 May 2015 19:57:57 +0000 (21:57 +0200)]
parse_kconfig fix problem with generated rules
Generated rules were unsatisfiable all the time.
Problem was default value of vis variable.
Karel Kočí [Mon, 4 May 2015 18:19:57 +0000 (20:19 +0200)]
parse_kconfig adding proper visibility dependency
For unknown reasons, output rules with generated default solution are not satisfiable.
Karel Kočí [Sat, 2 May 2015 11:29:49 +0000 (13:29 +0200)]
parse_kconfig fix problems with generated rules to be UNSAT
Karel Kočí [Sat, 2 May 2015 11:28:56 +0000 (13:28 +0200)]
parse_kconfig add debug output of boolexpr
Karel Kočí [Sat, 2 May 2015 11:28:08 +0000 (13:28 +0200)]
Fixes in scripts and add minisat_args
Karel Kočí [Fri, 1 May 2015 20:40:43 +0000 (22:40 +0200)]
parse_kconfig add missing rule
Karel Kočí [Fri, 1 May 2015 20:40:16 +0000 (22:40 +0200)]
parse_kconfig fix boolexpr_not
Karel Kočí [Fri, 1 May 2015 20:08:21 +0000 (22:08 +0200)]
parse_kconfig move debug output before action
Karel Kočí [Fri, 1 May 2015 19:53:19 +0000 (21:53 +0200)]
Fix Dprintf macro
Karel Kočí [Fri, 1 May 2015 19:53:01 +0000 (21:53 +0200)]
Fix parse_kconfig symlist_el variables type
Karel Kočí [Fri, 1 May 2015 19:52:27 +0000 (21:52 +0200)]
parse_kconfig add debug outputs
Karel Kočí [Fri, 1 May 2015 19:51:49 +0000 (21:51 +0200)]
Add DEBUG and Wall to parse_kconfig
Karel Kočí [Fri, 1 May 2015 19:14:06 +0000 (21:14 +0200)]
Fix parse_kconfig symbol_map ids
Karel Kočí [Fri, 1 May 2015 19:13:45 +0000 (21:13 +0200)]
write_config update to parse_kconfig changes
Karel Kočí [Fri, 1 May 2015 18:56:42 +0000 (20:56 +0200)]
Fix missing configuration
Karel Kočí [Fri, 1 May 2015 18:56:25 +0000 (20:56 +0200)]
Fix missing definition
Karel Kočí [Fri, 1 May 2015 18:56:11 +0000 (20:56 +0200)]
Fit solution.apply to new changes
Karel Kočí [Fri, 1 May 2015 18:55:43 +0000 (20:55 +0200)]
parse_kconfig rewriten
parse_kconfig should now generate full dependency.
It is not transforming whole expression to CNF, but only pairs.
Karel Kočí [Thu, 30 Apr 2015 14:22:01 +0000 (16:22 +0200)]
parse_kconfig changes before more changes come
This is commit that breaks parse_kconfig program...
Karel Kočí [Wed, 29 Apr 2015 08:17:05 +0000 (10:17 +0200)]
Add prompt variable to parse_kconfig
Karel Kočí [Tue, 28 Apr 2015 12:11:38 +0000 (14:11 +0200)]
Add possibility of running step-by-step
Karel Kočí [Tue, 28 Apr 2015 12:08:59 +0000 (14:08 +0200)]
Include iteration and phase code to loop
Karel Kočí [Tue, 28 Apr 2015 12:06:01 +0000 (14:06 +0200)]
Fix solution.apply error
Karel Kočí [Tue, 28 Apr 2015 12:05:15 +0000 (14:05 +0200)]
Change config kernem_make_output
Karel Kočí [Tue, 28 Apr 2015 12:04:43 +0000 (14:04 +0200)]
Fix run and initram dependency
Karel Kočí [Tue, 28 Apr 2015 11:05:26 +0000 (13:05 +0200)]
Add boot phase
Karel Kočí [Tue, 28 Apr 2015 11:04:47 +0000 (13:04 +0200)]
Remove spare line from scripts/conf.py
Karel Kočí [Mon, 27 Apr 2015 20:24:34 +0000 (22:24 +0200)]
Fix wrong open mode of iteration file in boot
Karel Kočí [Mon, 27 Apr 2015 20:22:33 +0000 (22:22 +0200)]
Fix boot benchmark script
Karel Kočí [Mon, 27 Apr 2015 20:14:41 +0000 (22:14 +0200)]
Fix missing symbol_map on test launch
Karel Kočí [Mon, 27 Apr 2015 20:07:34 +0000 (22:07 +0200)]
Set execution file mode bit on test.py
Karel Kočí [Mon, 27 Apr 2015 19:54:11 +0000 (21:54 +0200)]
Fix problem with test dependency
Karel Kočí [Mon, 27 Apr 2015 19:38:15 +0000 (21:38 +0200)]
Add basic TODO
TODO in this files are future work points.
Karel Kočí [Mon, 27 Apr 2015 19:36:06 +0000 (21:36 +0200)]
Finish implementation of test.test
Karel Kočí [Mon, 27 Apr 2015 19:35:45 +0000 (21:35 +0200)]
Finish implementation of boot.boot
Karel Kočí [Mon, 27 Apr 2015 19:35:12 +0000 (21:35 +0200)]
Add example testing benchmark scripts
Karel Kočí [Mon, 27 Apr 2015 19:34:45 +0000 (21:34 +0200)]
Change boot.gen_nbscripts to support relative conf paths
Karel Kočí [Mon, 27 Apr 2015 19:33:40 +0000 (21:33 +0200)]
Add output_confs generation to solution apply
Karel Kočí [Mon, 27 Apr 2015 19:31:03 +0000 (21:31 +0200)]
Chnage conf paths from absolute to relative
Karel Kočí [Mon, 27 Apr 2015 19:28:47 +0000 (21:28 +0200)]
Add NBSCRIPT config
Karel Kočí [Mon, 27 Apr 2015 19:26:45 +0000 (21:26 +0200)]
fix problems with initram
Karel Kočí [Mon, 27 Apr 2015 10:17:23 +0000 (12:17 +0200)]
First implementation of test.py
Not yet finished.
Karel Kočí [Mon, 27 Apr 2015 10:17:00 +0000 (12:17 +0200)]
Firt implementation of boot.py
Not yet finished.
Karel Kočí [Mon, 27 Apr 2015 10:15:14 +0000 (12:15 +0200)]
Add initram build
Not working properly yet.
Karel Kočí [Sun, 26 Apr 2015 12:00:11 +0000 (14:00 +0200)]
distclean targets in root Makefile documented
Karel Kočí [Sun, 26 Apr 2015 11:52:53 +0000 (13:52 +0200)]
Add buildroot default .config
On first execution of buildroot targets from root Makefile is now placed
nondefault .config file.
This new configuration is default configuration except of initram setting.
Karel Kočí [Sun, 26 Apr 2015 11:49:35 +0000 (13:49 +0200)]
Add distclean targets fro root Makefile