VME support is in a separate file

diff --git a/lincan/src/unican_vme.c b/lincan/src/unican_vme.c
new file mode 100644 (file)
index 0000000..5075a01
--- /dev/null
+++ b/lincan/src/unican_vme.c
@@ -0,0 +1,117 @@
+/* unican_vme.c
+ * Linux CAN-bus device driver.
+ * Written for new CAN driver version by Pavel Pisa - OCERA team member
+ * email:pisa@cmp.felk.cvut.cz
+ * This software is released under the GPL-License.
+ * Version lincan-0.2  9 Jul 2003
+ */ 
+
+/* This file is included in unican.c when CAN_ENABLE_VME_SUPPORT is
+ * set. */
+
+#include "ca91c042.h"
+
+#define UNICAN_VME_IRQ 1
+
+/* Used to pass chip pointer to irq handler. This sould be done in VME
+ * bridge driver */
+#define VME_CHIPS_SIZE 8
+struct chip_t *vme_chips[VME_CHIPS_SIZE];
+
+can_irqreturn_t unican_vme_irq_handler(int vmeirq, int vector, void *dev_id, struct pt_regs *regs)
+{
+/*     struct chip_t *chip = vme_chips[vector < VME_CHIPS_SIZE && vector >= 0 ? vector : 0]; */
+       struct chip_t *chip = vme_chips[0];
+
+       DEBUGMSG("unican_vme_irq_handler: vmeirq=0x%08x vector=0x%08x\n", vmeirq, vector);
+       return  unican_irq_handler(vmeirq, chip, regs);
+}
+
+int unican_vme_request_io(struct candevice_t *candev)
+{
+       struct chip_t *chip = candev->chip[0];
+
+       unican_request_io(candev);
+
+       if (chip->chip_irq < 0 || chip->chip_irq >= VME_CHIPS_SIZE) {
+               CANMSG("Bad irq parameter. Maximum is %d.\n", VME_CHIPS_SIZE-1);
+               return -EINVAL;
+       }
+
+/*     vme_chips[chip->chip_irq] = chip; */
+       vme_chips[0] = chip;    
+
+       request_vmeirq(UNICAN_VME_IRQ, unican_vme_irq_handler);
+       enable_vmeirq(UNICAN_VME_IRQ);
+
+       return 0;
+}
+
+/**
+ * unican_vme_release_io - free reserved io memory range
+ * @candev: pointer to candevice/board which releases io
+ *
+ * Return Value: The function always returns zero
+ * File: src/unican.c
+ */
+int unican_vme_release_io(struct candevice_t *candev)
+{
+       unican_release_io(candev);
+
+       free_vmeirq(UNICAN_VME_IRQ);
+       disable_vmeirq(UNICAN_VME_IRQ);
+       return 0;
+}
+
+/**
+ * unican_vme_init_hw_data - Initialize hardware cards
+ * @candev: Pointer to candevice/board structure
+ *
+ * Return Value: The function always returns zero
+ * File: src/unican.c
+ */
+int unican_vme_reset(struct candevice_t *candev)
+{
+       int ret;
+       struct chip_t *chip = candev->chip[0];
+
+       ret = unican_reset(candev);
+
+       /* Setup VME interrupt vector */
+       if (ret == 0) 
+               unican_writew(0x1234/* chip->chip_irq */,chip->chip_base_addr+CL2_VME_INT_VECTOR);
+
+
+       return ret;
+}
+
+/**
+ * unican_vme_init_chip_data - Initialize chips
+ * @candev: Pointer to candevice/board structure
+ * @chipnr: Number of the CAN chip on the hardware card
+ *
+ * Return Value: The function always returns zero
+ * File: src/unican.c
+ */
+int unican_vme_init_chip_data(struct candevice_t *candev, int chipnr)
+{
+       struct chip_t *chip = candev->chip[chipnr];
+
+       unican_init_chip_data(candev, chipnr);
+
+       chip->flags |= CHIP_IRQ_VME;
+       chip->chipspecops->irq_handler=unican_vme_irq_handler;
+       return 0;
+}
+
+
+int unican_vme_register(struct hwspecops_t *hwspecops)
+{
+       unican_register(hwspecops);
+
+       hwspecops->request_io = unican_vme_request_io;
+       hwspecops->release_io = unican_vme_release_io;
+       hwspecops->reset = unican_vme_reset;
+       hwspecops->init_chip_data = unican_vme_init_chip_data;
+       return 0;
+}