# -*- makefile -*-
-SUBDIRS =
+SUBDIRS = usbcan
--- /dev/null
+# Generic directory or leaf node makefile for OCERA make framework
+
+ifndef MAKERULES_DIR
+MAKERULES_DIR := $(shell ( old_pwd="" ; while [ ! -e Makefile.rules ] ; do if [ "$$old_pwd" == `pwd` ] ; then exit 1 ; else old_pwd=`pwd` ; cd -L .. 2>/dev/null ; fi ; done ; pwd ) )
+endif
+
+ifeq ($(MAKERULES_DIR),)
+all : default
+.DEFAULT::
+ @echo -e "\nThe Makefile.rules has not been found in this or partent directory\n"
+else
+include $(MAKERULES_DIR)/Makefile.rules
+endif
+
--- /dev/null
+# -*- makefile -*-
+
+default_CONFIG = CONFIG_APP_USBCAN=n
+
+ifeq ($(CONFIG_APP_USBCAN),y)
+
+#ULAN_ID=usbtest
+
+#default_CONFIG += CONFIG_ULOI_LT=x
+#default_CONFIG += CONFIG_ULAN_DY=x
+default_CONFIG += MACH=$(MACH)
+#default_CONFIG += ULAN_ID=$(ULAN_ID)
+default_CONFIG += CONFIG_MISC_VECT=x
+
+LOCAL_CONFIG_H = local_config.h
+
+INCLUDES += -I.
+
+#include_HEADERS = ul_idstr.h
+
+bin_PROGRAMS = usbcan
+usbcan_SOURCES = main.c usb_srq.c can.c can_queue.c sja1000p.c can_quesysless.c
+
+#usbtest_SOURCES += ul_idstr.c
+#lib_LOADLIBES = bspbase ul_drv lpciap keyval lpciap_kvpb mach_hal uldy
+lib_LOADLIBES = bspbase usbbase lpcusb mach_hal
+usbcan_MOREOBJS = $(USER_LIB_DIR)/system_stub.o $(USER_LIB_DIR)/ivt.o
+nobase_include_HEADERS = usb/usb_defs.h
+
+link_VARIANTS = boot
+
+endif #CONFIG_ULBOOT
--- /dev/null
+/**
+can.c
+
+Routines for sending and receiving messages for configuration and/or
+communication over CAN network using a SJA1000 transceiver.
+For use in UL_USB1 module, it runs in Intel mode.
+See documentation for details.
+
+*/
+
+
+#include "can/can.h"
+
+/// Baud rates
+#if SJA1000_CLK==(24000000)
+ /* Bus speed, Precaler, SJW, TSEG1, TSEG2
+ * For SJW setting we assume 1% xtal accuracy
+ */
+ const long sja1000_freqs[3][5]=
+ {{1000, 0x00, 0xC0, 0x08, 0x10}
+ ,{250, 0x02, 0xC0, 0x0A, 0x30}
+ ,{100, 0x07, 0xC0, 0x09, 0x30}};
+ const int sja1000_freq_cnt=3;
+#endif
+
+struct can_baudparams_t canbaud;
+
+void can_comm_init()
+{
+ // Due to change in design there is CS_PIN connected with ALE_PIN and ALE_PIN connection to LPC is interrupted
+ // We don't use ALE_PIN
+ //IO0DIR|=P0_SJA1000_ALE_PIN|P0_SJA1000_CS_PIN|P0_SJA1000_RD_PIN|P0_SJA1000_WR_PIN;
+ IO0DIR|=P0_SJA1000_CS_PIN|P0_SJA1000_RD_PIN|P0_SJA1000_WR_PIN;
+ IO0DIR&=~(P0_SJA1000_INT_PIN);
+
+ SET_OUT_PIN(IO0,P0_SJA1000_CS_PIN);
+ CLR_OUT_PIN(IO1,P1_SJA1000_RST_PIN);
+ for (slowdown=0;slowdown<20*SJA1000_SCLK;slowdown++);
+ SET_OUT_PIN(IO0,P0_SJA1000_CS_PIN);
+ // Due to change in design there is CS_PIN connected with ALE_PIN and ALE_PIN connection to LPC is interrupted
+ // CLR_OUT_PIN(IO0,P0_SJA1000_ALE_PIN);
+ SET_OUT_PIN(IO1,P1_SJA1000_RST_PIN);
+ for (slowdown=0;slowdown<20*SJA1000_SCLK;slowdown++);
+
+}
+
+int can_write(uint8_t address,uint8_t* data)
+{
+ IO1DIR|=0x00FF0000; // Port as output to send data
+ IO1CLR=0x00FF0000; // Clear all data on port
+ // Init
+ SET_OUT_PIN(IO0,P0_SJA1000_RD_PIN); // Stays high on write
+ SET_OUT_PIN(IO0,P0_SJA1000_WR_PIN); // Stays high on address write
+ SET_OUT_PIN(IO0,P0_SJA1000_CS_PIN); // Sets output buffers to third state
+ for (slowdown=0;slowdown<SJA1000_SCLK;slowdown++);
+ //SET_OUT_PIN(IO0,P0_SJA1000_ALE_PIN); // Start command
+
+ // Set memory address
+ IO1SET=__val2mfld(0x00FF0000,address); // Shift data to SJA pins and output them
+ for (slowdown=0;slowdown<SJA1000_SCLK;slowdown++);
+ //CLR_OUT_PIN(IO0,P0_SJA1000_ALE_PIN); // Makes address active
+ CLR_OUT_PIN(IO0,P0_SJA1000_CS_PIN);
+ for (slowdown=0;slowdown<SJA1000_SCLK;slowdown++);
+
+ // Setting data
+ CLR_OUT_PIN(IO0,P0_SJA1000_WR_PIN);
+
+ IO1CLR=0x00FF0000;
+ IO1SET=__val2mfld(0x00FF0000,*data);
+ for (slowdown=0;slowdown<SJA1000_SCLK;slowdown++);
+ SET_OUT_PIN(IO0,P0_SJA1000_WR_PIN); // Data should be accepted by now
+ SET_OUT_PIN(IO0,P0_SJA1000_CS_PIN);
+ for (slowdown=0;slowdown<SJA1000_SCLK;slowdown++);
+ return 0;
+}
+
+int can_read(const uint8_t address,uint8_t* data)
+{
+ IO1DIR|=0x00FF0000; // Port as output to set address
+ IO1CLR=0x00FF0000; // Clear all data
+ // Init
+ SET_OUT_PIN(IO0,P0_SJA1000_WR_PIN); // Stays high on read
+ SET_OUT_PIN(IO0,P0_SJA1000_RD_PIN); // Stays high while entering address
+ SET_OUT_PIN(IO0,P0_SJA1000_CS_PIN);
+ for (slowdown=0;slowdown<SJA1000_SCLK;slowdown++);
+ //SET_OUT_PIN(IO0,P0_SJA1000_ALE_PIN);
+
+ // Request memory address
+ IO1SET=__val2mfld(0x00FF0000,address);
+ for (slowdown=0;slowdown<SJA1000_SCLK;slowdown++);
+ //CLR_OUT_PIN(IO0,P0_SJA1000_ALE_PIN);
+ CLR_OUT_PIN(IO0,P0_SJA1000_CS_PIN);
+
+ // Get data
+
+ IO1DIR&=~0x00FF0000; // Sets port as input
+ CLR_OUT_PIN(IO0,P0_SJA1000_RD_PIN);
+ for (slowdown=0;slowdown<SJA1000_SCLK;slowdown++);
+ *data=__mfld2val(0x00FF0000,IO1PIN);
+ SET_OUT_PIN(IO0,P0_SJA1000_RD_PIN);
+ SET_OUT_PIN(IO0,P0_SJA1000_CS_PIN);
+ for (slowdown=0;slowdown<SJA1000_SCLK;slowdown++);
+ return 0;
+}
+
+int can_init(){
+ uint8_t data=0,count=0;
+ do {
+ can_comm_init();
+ can_read(SJAMOD,&data);
+ if (count++ > 50)
+ return -1;
+ } while (!(data&sjaMOD_RM));
+
+ data=sjaCDR_CLKOUT_DIV1|sjaCDR_CLK_OFF|sjaCDR_CBP|sjaCDR_PELICAN;
+ can_write((uint8_t)SJACDR,(uint8_t*)&data);
+
+ // Single acceptance filter, reset mode
+ data=sjaMOD_AFM|sjaMOD_RM;
+ can_write((uint8_t)SJAMOD,(uint8_t*)&data);
+
+ // Enabling all interrupt sources
+ data=sjaENABLE_INTERRUPTS;
+ can_write((uint8_t)SJAIER,(uint8_t*)&data);
+
+ // Accept all messages
+ data=0xFF;
+ can_write((uint8_t)SJAAMR0,(uint8_t*)&data);
+ can_write((uint8_t)SJAAMR0+1,(uint8_t*)&data);
+ can_write((uint8_t)SJAAMR0+2,(uint8_t*)&data);
+ can_write((uint8_t)SJAAMR0+3,(uint8_t*)&data);
+
+ data=sjaCMR_CDO;
+ can_write((uint8_t)SJACMR,(uint8_t*)&data);
+
+ return 0;
+}
+
+int can_autobaud(int tries){
+ uint8_t data=0;
+ int i=0,j,baudset=0;
+ // Single acceptance filter, reset mode, listen mode for baud determination
+ data=sjaMOD_LOM|sjaMOD_AFM|sjaMOD_RM;
+ can_write((uint8_t)SJAMOD,(uint8_t*)&data);
+ do {
+ canbaud.baudrate=sja1000_freqs[i][0]*1000;
+ canbaud.sjw=(sja1000_freqs[i][1]&0x3F)|(sja1000_freqs[i][2]&0xC0);
+ canbaud.sample_pt=(sja1000_freqs[i][3]&0x0F)|(sja1000_freqs[i][4]&0x70);
+ can_write(SJABTR0,(uint8_t *)(&canbaud.sjw));
+ can_write(SJABTR1,(uint8_t *)(&canbaud.sample_pt));
+ uint8_t intstor,temp;
+ can_read(SJAIER,&intstor);
+ temp=sjaIER_RIE|sjaIER_BEIE;
+ can_write(SJAIER,&temp);
+
+ /// Leave reset mode
+ can_read(SJAMOD,&temp);
+ temp&=~sjaMOD_RM;
+ can_write(SJAMOD,&temp);
+ j=0;
+ do{
+ can_read(SJAMOD,&temp);
+ if (j++>20)
+ return -1;
+ } while (temp&sjaMOD_RM);
+
+ /// Wait for successfull packet receive or receive error
+ j=0;
+ while (!(IO0PIN & P0_SJA1000_INT_PIN)){
+ }
+
+ can_read(SJAIR,&temp);
+ if (temp & sjaIR_RI)
+ baudset=1;
+
+ /// Back to reset
+ can_read(SJAMOD,&temp);
+ temp|=sjaMOD_RM;
+ can_write(SJAMOD,&temp);
+ j=0;
+ do{
+ can_read(SJAMOD,&temp);
+ if (j++>20)
+ return -1;
+ } while (!(temp&sjaMOD_RM));
+
+ if (++i==sja1000_freq_cnt)
+ return -1;
+ } while (baudset==0);
+ return 0;
+}
+
+int can_poll(){
+
+ return 0;
+}
+
+int can_transmit_direct(uint8_t *data){
+ int len=0,ext=0,i;
+ uint8_t *ptr=data,tmitptr,temp;
+ ext=(*ptr)& sjaFRM_FF;
+ len=(*ptr)& 0xFF;
+
+ // check if transmit buffer is free
+ do {
+ if (can_poll()==-1)
+ return -1;
+ can_read(SJASR,&temp);
+ temp&=sjaSR_TBS;
+ } while (!temp);
+
+ tmitptr=SJAFRM;
+ can_write(tmitptr++,data++); // Header
+ can_write(tmitptr++,data++); // Ident 1
+ can_write(tmitptr++,data++); // Ident 2
+ if (ext){
+ can_write(tmitptr++,data++); // Ident 3
+ can_write(tmitptr++,data++); // Ident 4
+ }
+ for (i=0;i<len;i++)
+ can_write(tmitptr++,data++); // Data i;
+
+ // Set TR bit
+ temp=sjaCMR_TR;
+ can_write(SJACMR,&temp);
+
+ return 0;
+}
+
+int can_transmit(int ext_header,int rtr,uint8_t *mask,int numbytes,uint8_t *data){
+ uint8_t tmitptr,temp;
+ int i=0;
+
+ if (numbytes<0)
+ numbytes=0;
+
+ if (mask==NULL)
+ ; // use internal mask
+
+ // check if transmit buffer is free
+ do {
+ if (can_poll()==-1)
+ return -1;
+ can_read(SJASR,&temp);
+ temp&=sjaSR_TBS;
+ } while (!temp);
+
+ tmitptr=SJAFRM;
+ temp=(ext_header?sjaFRM_FF:0)|(rtr?sjaFRM_RTR:0)|(numbytes>8?0x08:numbytes);
+ can_write(tmitptr++,&temp); // Header
+
+ can_write(tmitptr++,mask++); // Ident 1
+ can_write(tmitptr++,mask++); // Ident 2
+ if (ext_header){
+ can_write(tmitptr++,mask++); // Ident 3
+ can_write(tmitptr++,mask++); // Ident 4
+ }
+ for (i=0;i<(numbytes>8?0x08:numbytes);i++)
+ can_write(tmitptr++,data++); // Data i;
+
+ // Set TR bit
+ temp=sjaCMR_TR;
+ can_write(SJACMR,&temp);
+
+ return 0;
+}
+
+int can_receive(uint8_t len,uint8_t *data){
+
+
+ return 0;
+}
--- /dev/null
+#ifndef SJA1000_CAN_H
+#define SJA1000_CAN_H
+
+#include <stdio.h>
+#include <string.h>
+#include <cpu_def.h>
+#include <system_def.h>
+#include <lt_timer.h>
+#include <local_config.h>
+#include <usb/usbdebug.h>
+#include <usb/usb.h>
+#include <usb/lpc.h>
+#include <usb/usb_srq.h>
+#include <mem_loc.h>
+#include <hal_machperiph.h>
+
+
+#include "main.h"
+#include "sja1000p.h"
+/* can.h
+ * Header file for the Linux CAN-bus driver.
+ * Written by Arnaud Westenberg email:arnaud@wanadoo.nl
+ * Rewritten for new CAN queues by Pavel Pisa - OCERA team member
+ * email:pisa@cmp.felk.cvut.cz
+ * This software is released under the GPL-License.
+ * Version lincan-0.3 17 Jun 2004
+ */
+
+ /*
+ NOP count for synchronizing with peripheral (SJA1000)
+ */
+ #define SJA1000_CLK (24000000) /* XTAL frequency */
+ #define SJA1000_PRESC (2) /* embedded prescaler */
+ #define SJA1000_CCLK (SJA1000_CLK/SJA1000_PRESC) /* SJA core frequency */
+ #define SJA1000_SCLK (PCLK/SJA1000_CCLK) /* Clock count to synchronize with LPC */
+
+ volatile int slowdown;
+
+/**
+ * struct can_baudparams_t - datatype for calling CONF_BAUDPARAMS IOCTL
+ * @flags: reserved for additional flags for chip configuration, should be written -1 or 0
+ * @baudrate: baud rate in Hz
+ * @sjw: synchronization jump width (0-3) prescaled clock cycles
+ * @sampl_pt: sample point in % (0-100) sets (TSEG1+1)/(TSEG1+TSEG2+2) ratio
+ *
+ * The structure is used to configure new set of parameters into CAN controller chip.
+ * If default value of some field should be preserved, fill field by value -1.
+ */
+struct can_baudparams_t {
+ long flags;
+ long baudrate;
+ long sjw;
+ long sample_pt;
+};
+
+extern int can_init();
+extern int can_autobaud(int tries);
+extern int can_read(uint8_t address,uint8_t *data);
+extern int can_write(uint8_t address,uint8_t *data);
+
+extern int can_set_mask(int dual_mask,int count,uint8_t *mask,uint8_t *accept);
+
+extern int can_poll();
+extern int can_transmit_direct(uint8_t *data);
+//int can_transmit(char ext_header,char rtr,int mask_size,uint8_t *mask,int numbytes,uint8_t *data);
+extern int can_transmit(int ext_header,int rtr,uint8_t *mask,int numbytes,uint8_t *data);
+//int can_receive(uint8_t *data);
+extern int can_receive(uint8_t len,uint8_t *data);
+
+#endif /* SJA1000_CAN_H */
--- /dev/null
+/* can_queue.h - CAN queues and message passing infrastructure
+ * Linux CAN-bus device driver.
+ * Written by Pavel Pisa - OCERA team member
+ * email:pisa@cmp.felk.cvut.cz
+ * This software is released under the GPL-License.
+ * Version lincan-0.3 17 Jun 2004
+ */
+
+#ifndef _CAN_QUEUE_H
+#define _CAN_QUEUE_H
+
+#include "./canmsg.h"
+#include "./constants.h"
+#include "./can_sysdep.h"
+
+/**
+ * struct canque_slot_t - one CAN message slot in the CAN FIFO queue
+ * @next: pointer to the next/younger slot
+ * @slot_flags: space for flags and optional command describing action
+ * associated with slot data
+ * @msg: space for one CAN message
+ *
+ * This structure is used to store CAN messages in the CAN FIFO queue.
+ */
+ struct canque_slot_t {
+ struct canque_slot_t *next;
+ unsigned long slot_flags;
+ struct canmsg_t msg;
+};
+
+#define CAN_SLOTF_CMD 0x00ff /* */
+
+/**
+ * struct canque_fifo_t - CAN FIFO queue representation
+ * @fifo_flags: this field holds global flags describing state of the FIFO.
+ * %CAN_FIFOF_ERROR is set when some error condition occurs.
+ * %CAN_FIFOF_ERR2BLOCK defines, that error should lead to the FIFO block state.
+ * %CAN_FIFOF_BLOCK state blocks insertion of the next messages.
+ * %CAN_FIFOF_OVERRUN attempt to acquire new slot, when FIFO is full.
+ * %CAN_FIFOF_FULL indicates FIFO full state.
+ * %CAN_FIFOF_EMPTY indicates no allocated slot in the FIFO.
+ * %CAN_FIFOF_DEAD condition indication. Used when FIFO is beeing destroyed.
+ * @error_code: futher description of error condition
+ * @head: pointer to the FIFO head, oldest slot
+ * @tail: pointer to the location, where pointer to newly inserted slot
+ * should be added
+ * @flist: pointer to list of the free slots associated with queue
+ * @entry: pointer to the memory allocated for the list slots.
+ * @fifo_lock: the lock to ensure atomicity of slot manipulation operations.
+ * @slotsnr: number of allocated slots
+ *
+ * This structure represents CAN FIFO queue. It is implemented as
+ * a single linked list of slots prepared for processing. The empty slots
+ * are stored in single linked list (@flist).
+ */
+struct canque_fifo_t {
+ unsigned long fifo_flags;
+ unsigned long error_code;
+ struct canque_slot_t *head; /* points to the oldest entry */
+ struct canque_slot_t **tail; /* points to NULL pointer for chaining */
+ struct canque_slot_t *flist; /* points the first entry in the free list */
+ struct canque_slot_t *entry; /* points to first allocated entry */
+ can_spinlock_t fifo_lock; /* can_spin_lock_irqsave / can_spin_unlock_irqrestore */
+ int slotsnr;
+};
+
+#define CAN_FIFOF_DESTROY_b 15
+#define CAN_FIFOF_ERROR_b 14
+#define CAN_FIFOF_ERR2BLOCK_b 13
+#define CAN_FIFOF_BLOCK_b 12
+#define CAN_FIFOF_OVERRUN_b 11
+#define CAN_FIFOF_FULL_b 10
+#define CAN_FIFOF_EMPTY_b 9
+#define CAN_FIFOF_DEAD_b 8
+#define CAN_FIFOF_INACTIVE_b 7
+#define CAN_FIFOF_FREEONEMPTY_b 6
+#define CAN_FIFOF_READY_b 5
+#define CAN_FIFOF_NOTIFYPEND_b 4
+#define CAN_FIFOF_RTL_MEM_b 3
+
+#define CAN_FIFOF_DESTROY (1<<CAN_FIFOF_DESTROY_b)
+#define CAN_FIFOF_ERROR (1<<CAN_FIFOF_ERROR_b)
+#define CAN_FIFOF_ERR2BLOCK (1<<CAN_FIFOF_ERR2BLOCK_b)
+#define CAN_FIFOF_BLOCK (1<<CAN_FIFOF_BLOCK_b)
+#define CAN_FIFOF_OVERRUN (1<<CAN_FIFOF_OVERRUN_b)
+#define CAN_FIFOF_FULL (1<<CAN_FIFOF_FULL_b)
+#define CAN_FIFOF_EMPTY (1<<CAN_FIFOF_EMPTY_b)
+#define CAN_FIFOF_DEAD (1<<CAN_FIFOF_DEAD_b)
+#define CAN_FIFOF_INACTIVE (1<<CAN_FIFOF_INACTIVE_b)
+#define CAN_FIFOF_FREEONEMPTY (1<<CAN_FIFOF_FREEONEMPTY_b)
+#define CAN_FIFOF_READY (1<<CAN_FIFOF_READY_b)
+#define CAN_FIFOF_NOTIFYPEND (1<<CAN_FIFOF_NOTIFYPEND_b)
+#define CAN_FIFOF_RTL_MEM (1<<CAN_FIFOF_RTL_MEM_b)
+
+#define canque_fifo_test_fl(fifo,fifo_fl) \
+ test_bit(CAN_FIFOF_##fifo_fl##_b,&(fifo)->fifo_flags)
+#define canque_fifo_set_fl(fifo,fifo_fl) \
+ set_bit(CAN_FIFOF_##fifo_fl##_b,&(fifo)->fifo_flags)
+#define canque_fifo_clear_fl(fifo,fifo_fl) \
+ clear_bit(CAN_FIFOF_##fifo_fl##_b,&(fifo)->fifo_flags)
+#define canque_fifo_test_and_set_fl(fifo,fifo_fl) \
+ test_and_set_bit(CAN_FIFOF_##fifo_fl##_b,&(fifo)->fifo_flags)
+#define canque_fifo_test_and_clear_fl(fifo,fifo_fl) \
+ test_and_clear_bit(CAN_FIFOF_##fifo_fl##_b,&(fifo)->fifo_flags)
+
+
+/**
+ * canque_fifo_get_inslot - allocate slot for the input of one CAN message
+ * @fifo: pointer to the FIFO structure
+ * @slotp: pointer to location to store pointer to the allocated slot.
+ * @cmd: optional command associated with allocated slot.
+ *
+ * Return Value: The function returns negative value if there is no
+ * free slot in the FIFO queue.
+ */
+static inline
+int canque_fifo_get_inslot(struct canque_fifo_t *fifo, struct canque_slot_t **slotp, int cmd)
+{
+ can_spin_irqflags_t flags;
+ struct canque_slot_t *slot;
+ can_spin_lock_irqsave(&fifo->fifo_lock, flags);
+ /* get the first free slot slot from flist */
+ if(!(slot=fifo->flist)) {
+ canque_fifo_set_fl(fifo,OVERRUN);
+ canque_fifo_set_fl(fifo,FULL);
+ can_spin_unlock_irqrestore(&fifo->fifo_lock, flags);
+ *slotp=NULL;
+ return -1;
+ }
+ /* adjust free slot list */
+ if(!(fifo->flist=slot->next))
+ canque_fifo_set_fl(fifo,FULL);
+ can_spin_unlock_irqrestore(&fifo->fifo_lock, flags);
+ *slotp=slot;
+ slot->slot_flags=cmd&CAN_SLOTF_CMD;
+ return 1;
+}
+
+/**
+ * canque_fifo_put_inslot - releases slot to further processing
+ * @fifo: pointer to the FIFO structure
+ * @slot: pointer to the slot previously acquired by canque_fifo_get_inslot().
+ *
+ * Return Value: The nonzero return value indicates, that the queue was empty
+ * before call to the function. The caller should wake-up output side of the queue.
+ */
+static inline
+int canque_fifo_put_inslot(struct canque_fifo_t *fifo, struct canque_slot_t *slot)
+{
+ int ret;
+ can_spin_irqflags_t flags;
+ slot->next=NULL;
+ can_spin_lock_irqsave(&fifo->fifo_lock, flags);
+ if(*fifo->tail) can_printk(KERN_CRIT "canque_fifo_put_inslot: fifo->tail != NULL\n");
+ *fifo->tail=slot;
+ fifo->tail=&slot->next;
+ ret=0;
+ if(canque_fifo_test_and_clear_fl(fifo,EMPTY))
+ ret=CAN_FIFOF_EMPTY; /* Fifo has been empty before put */
+ if(canque_fifo_test_and_clear_fl(fifo,INACTIVE))
+ ret=CAN_FIFOF_INACTIVE; /* Fifo has been empty before put */
+ can_spin_unlock_irqrestore(&fifo->fifo_lock, flags);
+ return ret;
+}
+
+/**
+ * canque_fifo_abort_inslot - release and abort slot
+ * @fifo: pointer to the FIFO structure
+ * @slot: pointer to the slot previously acquired by canque_fifo_get_inslot().
+ *
+ * Return Value: The nonzero value indicates, that fifo was full
+ */
+static inline
+int canque_fifo_abort_inslot(struct canque_fifo_t *fifo, struct canque_slot_t *slot)
+{
+ int ret=0;
+ can_spin_irqflags_t flags;
+ can_spin_lock_irqsave(&fifo->fifo_lock, flags);
+ slot->next=fifo->flist;
+ fifo->flist=slot;
+ if(canque_fifo_test_and_clear_fl(fifo,FULL))
+ ret=CAN_FIFOF_FULL;
+ can_spin_unlock_irqrestore(&fifo->fifo_lock, flags);
+ return ret;
+}
+
+/**
+ * canque_fifo_test_outslot - test and get ready slot from the FIFO
+ * @fifo: pointer to the FIFO structure
+ * @slotp: pointer to location to store pointer to the oldest slot from the FIFO.
+ *
+ * Return Value: The negative value indicates, that queue is empty.
+ * The positive or zero value represents command stored into slot by
+ * the call to the function canque_fifo_get_inslot().
+ * The successfully acquired FIFO output slot has to be released by
+ * the call canque_fifo_free_outslot() or canque_fifo_again_outslot().
+ */
+static inline
+int canque_fifo_test_outslot(struct canque_fifo_t *fifo, struct canque_slot_t **slotp)
+{
+ can_spin_irqflags_t flags;
+ int cmd;
+ struct canque_slot_t *slot;
+ can_spin_lock_irqsave(&fifo->fifo_lock, flags);
+ if(!(slot=fifo->head)){;
+ canque_fifo_set_fl(fifo,EMPTY);
+ can_spin_unlock_irqrestore(&fifo->fifo_lock, flags);
+ *slotp=NULL;
+ return -1;
+ }
+ if(!(fifo->head=slot->next))
+ fifo->tail=&fifo->head;
+ can_spin_unlock_irqrestore(&fifo->fifo_lock, flags);
+
+ *slotp=slot;
+ cmd=slot->slot_flags;
+ return cmd&CAN_SLOTF_CMD;
+}
+
+
+/**
+ * canque_fifo_free_outslot - free processed FIFO slot
+ * @fifo: pointer to the FIFO structure
+ * @slot: pointer to the slot previously acquired by canque_fifo_test_outslot().
+ *
+ * Return Value: The returned value informs about FIFO state change.
+ * The mask %CAN_FIFOF_FULL indicates, that the FIFO was full before
+ * the function call. The mask %CAN_FIFOF_EMPTY informs, that last ready slot
+ * has been processed.
+ */
+static inline
+int canque_fifo_free_outslot(struct canque_fifo_t *fifo, struct canque_slot_t *slot)
+{
+ int ret=0;
+ can_spin_irqflags_t flags;
+ can_spin_lock_irqsave(&fifo->fifo_lock, flags);
+ slot->next=fifo->flist;
+ fifo->flist=slot;
+ if(canque_fifo_test_and_clear_fl(fifo,FULL))
+ ret=CAN_FIFOF_FULL;
+ if(!(fifo->head)){
+ canque_fifo_set_fl(fifo,EMPTY);
+ ret|=CAN_FIFOF_EMPTY;
+ }
+ can_spin_unlock_irqrestore(&fifo->fifo_lock, flags);
+ return ret;
+}
+
+/**
+ * canque_fifo_again_outslot - interrupt and postpone processing of the slot
+ * @fifo: pointer to the FIFO structure
+ * @slot: pointer to the slot previously acquired by canque_fifo_test_outslot().
+ *
+ * Return Value: The function cannot fail..
+ */
+static inline
+int canque_fifo_again_outslot(struct canque_fifo_t *fifo, struct canque_slot_t *slot)
+{
+ can_spin_irqflags_t flags;
+ can_spin_lock_irqsave(&fifo->fifo_lock, flags);
+ if(!(slot->next=fifo->head))
+ fifo->tail=&slot->next;
+ fifo->head=slot;
+ can_spin_unlock_irqrestore(&fifo->fifo_lock, flags);
+ return 1;
+}
+
+int canque_fifo_flush_slots(struct canque_fifo_t *fifo);
+
+int canque_fifo_init_slots(struct canque_fifo_t *fifo);
+
+#define CANQUEUE_PRIO_NR 3
+
+/* Forward declarations for external types */
+struct msgobj_t;
+struct canchip_t;
+
+/**
+ * struct canque_edge_t - CAN message delivery subsystem graph edge
+ * @fifo: place where primitive @struct canque_fifo_t FIFO is located.
+ * @filtid: the possible CAN message identifiers filter.
+ * @filtmask: the filter mask, the comparison considers only
+ * @filtid bits corresponding to set bits in the @filtmask field.
+ * @inpeers: the lists of all peers FIFOs connected by their
+ * input side (@inends) to the same terminal (@struct canque_ends_t).
+ * @outpeers: the lists of all peers FIFOs connected by their
+ * output side (@outends) to the same terminal (@struct canque_ends_t).
+ * @activepeers: the lists of peers FIFOs connected by their
+ * output side (@outends) to the same terminal (@struct canque_ends_t)
+ * with same priority and active state.
+ * @inends: the pointer to the FIFO input side terminal (@struct canque_ends_t).
+ * @outends: the pointer to the FIFO output side terminal (@struct canque_ends_t).
+ * @edge_used: the atomic usage counter, mainly used for safe destruction of the edge.
+ * @edge_prio: the assigned queue priority from the range 0 to %CANQUEUE_PRIO_NR-1
+ * @edge_num: edge sequential number intended for debugging purposes only
+ * @pending_peers: edges with pending delayed events (RTL->Linux calls)
+ * @pending_inops: bitmask of pending operations
+ * @pending_outops: bitmask of pending operations
+ *
+ * This structure represents one direction connection from messages source
+ * (@inends) to message consumer (@outends) fifo ends hub. The edge contains
+ * &struct canque_fifo_t for message fifo implementation.
+ */
+struct canque_edge_t {
+ struct canque_fifo_t fifo;
+ unsigned long filtid;
+ unsigned long filtmask;
+ struct list_head inpeers;
+ struct list_head outpeers;
+ struct list_head activepeers;
+ struct canque_ends_t *inends;
+ struct canque_ends_t *outends;
+ atomic_t edge_used;
+ int edge_prio;
+ int edge_num;
+ #ifdef CAN_WITH_RTL
+ struct list_head pending_peers;
+ unsigned long pending_inops;
+ unsigned long pending_outops;
+ #endif /*CAN_WITH_RTL*/
+};
+
+/**
+ * struct canque_ends_t - CAN message delivery subsystem graph vertex (FIFO ends)
+ * @ends_flags: this field holds flags describing state of the ENDS structure.
+ * @active: the array of the lists of active edges directed to the ends structure
+ * with ready messages. The array is indexed by the edges priorities.
+ * @idle: the list of the edges directed to the ends structure with empty FIFOs.
+ * @inlist: the list of outgoing edges input sides.
+ * @outlist: the list of all incoming edges output sides. Each of there edges
+ * is listed on one of @active or @idle lists.
+ * @ends_lock: the lock synchronizing operations between threads accessing
+ * same ends structure.
+ * @notify: pointer to notify procedure. The next state changes are notified.
+ * %CANQUEUE_NOTIFY_EMPTY (out->in call) - all slots are processed by FIFO out side.
+ * %CANQUEUE_NOTIFY_SPACE (out->in call) - full state negated => there is space for new message.
+ * %CANQUEUE_NOTIFY_PROC (in->out call) - empty state negated => out side is requested to process slots.
+ * %CANQUEUE_NOTIFY_NOUSR (both) - notify, that the last user has released the edge usage
+ * called with some lock to prevent edge disappear.
+ * %CANQUEUE_NOTIFY_DEAD (both) - edge is in progress of deletion.
+ * %CANQUEUE_NOTIFY_ATACH (both) - new edge has been attached to end.
+ * %CANQUEUE_NOTIFY_FILTCH (out->in call) - edge filter rules changed
+ * %CANQUEUE_NOTIFY_ERROR (out->in call) - error in messages processing.
+ * @context: space to store ends user specific information
+ * @endinfo: space to store some other ends usage specific informations
+ * mainly for waking-up by the notify calls.
+ * @dead_peers: used to chain ends wanting for postponed destruction
+ *
+ * Structure represents place to connect edges to for CAN communication entity.
+ * The zero, one or more incoming and outgoing edges can be connected to
+ * this structure.
+ */
+struct canque_ends_t {
+ unsigned long ends_flags;
+ struct list_head active[CANQUEUE_PRIO_NR];
+ struct list_head idle;
+ struct list_head inlist;
+ struct list_head outlist;
+ can_spinlock_t ends_lock; /* can_spin_lock_irqsave / can_spin_unlock_irqrestore */
+ void (*notify)(struct canque_ends_t *qends, struct canque_edge_t *qedge, int what);
+ void *context;
+ union {
+ struct {
+ wait_queue_head_t readq;
+ wait_queue_head_t writeq;
+ wait_queue_head_t emptyq;
+ #ifdef CAN_ENABLE_KERN_FASYNC
+ struct fasync_struct *fasync;
+ #endif /*CAN_ENABLE_KERN_FASYNC*/
+ } fileinfo;
+ #ifdef CAN_WITH_RTL
+ struct {
+ rtl_spinlock_t rtl_lock;
+ rtl_wait_t rtl_readq;
+ atomic_t rtl_readq_age;
+ rtl_wait_t rtl_writeq;
+ atomic_t rtl_writeq_age;
+ rtl_wait_t rtl_emptyq;
+ atomic_t rtl_emptyq_age;
+ unsigned long pend_flags;
+ } rtlinfo;
+ #endif /*CAN_WITH_RTL*/
+ struct {
+ struct msgobj_t *msgobj;
+ struct canchip_t *chip;
+ #ifndef CAN_WITH_RTL
+ wait_queue_head_t daemonq;
+ #else /*CAN_WITH_RTL*/
+ pthread_t worker_thread;
+ #endif /*CAN_WITH_RTL*/
+ } chipinfo;
+ } endinfo;
+ struct list_head dead_peers;
+};
+
+#define CANQUEUE_NOTIFY_EMPTY 1 /* out -> in - all slots are processed by FIFO out side */
+#define CANQUEUE_NOTIFY_SPACE 2 /* out -> in - full state negated => there is space for new message */
+#define CANQUEUE_NOTIFY_PROC 3 /* in -> out - empty state negated => out side is requested to process slots */
+#define CANQUEUE_NOTIFY_NOUSR 4 /* called with some lock to prevent edge disappear */
+#define CANQUEUE_NOTIFY_DEAD 5 /* */
+#define CANQUEUE_NOTIFY_DEAD_WANTED 6 /* */
+#define CANQUEUE_NOTIFY_ATTACH 7 /* */
+#define CANQUEUE_NOTIFY_FILTCH 8 /* filter changed */
+#define CANQUEUE_NOTIFY_ERROR 0x10000 /* error notifiers */
+#define CANQUEUE_NOTIFY_ERRTX_PREP 0x11001 /* tx preparation error */
+#define CANQUEUE_NOTIFY_ERRTX_SEND 0x11002 /* tx send error */
+#define CANQUEUE_NOTIFY_ERRTX_BUS 0x11003 /* tx bus error */
+
+#define CAN_ENDSF_DEAD (1<<0)
+#define CAN_ENDSF_MEM_RTL (1<<1)
+
+/**
+ * canque_notify_inends - request to send notification to the input ends
+ * @qedge: pointer to the edge structure
+ * @what: notification type
+ */
+static inline
+void canque_notify_inends(struct canque_edge_t *qedge, int what)
+{
+ if(qedge->inends)
+ if(qedge->inends->notify)
+ qedge->inends->notify(qedge->inends,qedge,what);
+}
+
+/**
+ * canque_notify_outends - request to send notification to the output ends
+ * @qedge: pointer to the edge structure
+ * @what: notification type
+ */
+static inline
+void canque_notify_outends(struct canque_edge_t *qedge, int what)
+{
+ if(qedge->outends)
+ if(qedge->outends->notify)
+ qedge->outends->notify(qedge->outends,qedge,what);
+}
+
+/**
+ * canque_notify_bothends - request to send notification to the both ends
+ * @qedge: pointer to the edge structure
+ * @what: notification type
+ */
+static inline
+void canque_notify_bothends(struct canque_edge_t *qedge, int what)
+{
+ canque_notify_inends(qedge, what);
+ canque_notify_outends(qedge, what);
+}
+
+/**
+ * canque_activate_edge - mark output end of the edge as active
+ * @qedge: pointer to the edge structure
+ * @inends: input side of the edge
+ *
+ * Function call moves output side of the edge from idle onto active edges
+ * list. This function has to be called with edge reference count held.
+ * that is same as for most of other edge functions.
+ */
+static inline
+void canque_activate_edge(struct canque_ends_t *inends, struct canque_edge_t *qedge)
+{
+ can_spin_irqflags_t flags;
+ struct canque_ends_t *outends;
+ if(qedge->edge_prio>=CANQUEUE_PRIO_NR)
+ qedge->edge_prio=CANQUEUE_PRIO_NR-1;
+ if((outends=qedge->outends)){
+ can_spin_lock_irqsave(&outends->ends_lock, flags);
+ can_spin_lock(&qedge->fifo.fifo_lock);
+ if(!canque_fifo_test_fl(&qedge->fifo,EMPTY)){
+ list_del(&qedge->activepeers);
+ list_add_tail(&qedge->activepeers,&outends->active[qedge->edge_prio]);
+ }
+ can_spin_unlock(&qedge->fifo.fifo_lock);
+ can_spin_unlock_irqrestore(&outends->ends_lock, flags);
+ }
+}
+
+/**
+ * canque_filtid2internal - converts message ID and filter flags into internal format
+ * @id: CAN message 11 or 29 bit identifier
+ * @filtflags: CAN message flags
+ *
+ * This function maps message ID and %MSG_RTR, %MSG_EXT and %MSG_LOCAL into one 32 bit number
+ */
+static inline
+unsigned int canque_filtid2internal(unsigned long id, int filtflags)
+{
+ filtflags &= MSG_RTR|MSG_EXT|MSG_LOCAL;
+ filtflags += filtflags&MSG_RTR;
+ return (id&MSG_ID_MASK) | (filtflags<<28);
+}
+
+int canque_get_inslot(struct canque_ends_t *qends,
+ struct canque_edge_t **qedgep, struct canque_slot_t **slotp, int cmd);
+
+int canque_get_inslot4id(struct canque_ends_t *qends,
+ struct canque_edge_t **qedgep, struct canque_slot_t **slotp,
+ int cmd, unsigned long id, int prio);
+
+int canque_put_inslot(struct canque_ends_t *qends,
+ struct canque_edge_t *qedge, struct canque_slot_t *slot);
+
+int canque_abort_inslot(struct canque_ends_t *qends,
+ struct canque_edge_t *qedge, struct canque_slot_t *slot);
+
+int canque_filter_msg2edges(struct canque_ends_t *qends, struct canmsg_t *msg);
+
+int canque_test_outslot(struct canque_ends_t *qends,
+ struct canque_edge_t **qedgep, struct canque_slot_t **slotp);
+
+int canque_free_outslot(struct canque_ends_t *qends,
+ struct canque_edge_t *qedge, struct canque_slot_t *slot);
+
+int canque_again_outslot(struct canque_ends_t *qends,
+ struct canque_edge_t *qedge, struct canque_slot_t *slot);
+
+int canque_set_filt(struct canque_edge_t *qedge,
+ unsigned long filtid, unsigned long filtmask, int flags);
+
+int canque_flush(struct canque_edge_t *qedge);
+
+int canqueue_disconnect_edge(struct canque_edge_t *qedge);
+
+int canqueue_connect_edge(struct canque_edge_t *qedge, struct canque_ends_t *inends, struct canque_ends_t *outends);
+
+int canqueue_ends_init_gen(struct canque_ends_t *qends);
+
+void canqueue_block_inlist(struct canque_ends_t *qends);
+
+void canqueue_block_outlist(struct canque_ends_t *qends);
+
+int canqueue_ends_kill_inlist(struct canque_ends_t *qends, int send_rest);
+
+int canqueue_ends_kill_outlist(struct canque_ends_t *qends);
+
+int canqueue_ends_filt_conjuction(struct canque_ends_t *qends, struct canfilt_t *filt);
+
+int canqueue_ends_flush_inlist(struct canque_ends_t *qends);
+
+int canqueue_ends_flush_outlist(struct canque_ends_t *qends);
+
+/* edge reference and traversal functions */
+
+void canque_edge_do_dead(struct canque_edge_t *edge);
+
+/**
+ * canque_edge_incref - increments edge reference count
+ * @edge: pointer to the edge structure
+ */
+static inline
+void canque_edge_incref(struct canque_edge_t *edge)
+{
+ atomic_inc(&edge->edge_used);
+}
+
+static inline
+can_spin_irqflags_t canque_edge_lock_both_ends(struct canque_ends_t *inends, struct canque_ends_t *outends)
+{
+ can_spin_irqflags_t flags;
+ if(inends<outends) {
+ can_spin_lock_irqsave(&inends->ends_lock, flags);
+ can_spin_lock(&outends->ends_lock);
+ }else{
+ can_spin_lock_irqsave(&outends->ends_lock, flags);
+ if(outends!=inends) can_spin_lock(&inends->ends_lock);
+ }
+ return flags;
+}
+
+static inline
+void canque_edge_unlock_both_ends(struct canque_ends_t *inends, struct canque_ends_t *outends, can_spin_irqflags_t flags)
+{
+ if(outends!=inends) can_spin_unlock(&outends->ends_lock);
+ can_spin_unlock_irqrestore(&inends->ends_lock, flags);
+}
+
+/* Non-inlined version of edge reference decrement */
+void __canque_edge_decref(struct canque_edge_t *edge);
+
+static inline
+void __canque_edge_decref_body(struct canque_edge_t *edge)
+{
+ can_spin_irqflags_t flags;
+ int dead_fl=0;
+ struct canque_ends_t *inends=edge->inends;
+ struct canque_ends_t *outends=edge->outends;
+
+ flags=canque_edge_lock_both_ends(inends, outends);
+ if(atomic_dec_and_test(&edge->edge_used)) {
+ dead_fl=!canque_fifo_test_and_set_fl(&edge->fifo,DEAD);
+ /* Because of former evolution of edge references
+ management notify of CANQUEUE_NOTIFY_NOUSR could
+ be moved to canque_edge_do_dead :-) */
+ }
+ canque_edge_unlock_both_ends(inends, outends, flags);
+ if(dead_fl) canque_edge_do_dead(edge);
+}
+
+#ifndef CAN_HAVE_ARCH_CMPXCHG
+/**
+ * canque_edge_decref - decrements edge reference count
+ * @edge: pointer to the edge structure
+ *
+ * This function has to be called without lock held for both ends of edge.
+ * If reference count drops to 0, function canque_edge_do_dead()
+ * is called.
+ */
+static inline
+void canque_edge_decref(struct canque_edge_t *edge)
+{
+ __canque_edge_decref_body(edge);
+}
+#else
+static inline
+void canque_edge_decref(struct canque_edge_t *edge)
+{
+ int x, y;
+
+ x = atomic_read(&edge->edge_used);
+ do{
+ if(x<=1)
+ return __canque_edge_decref(edge);
+ y=x;
+ /* This code strongly depends on the definition of atomic_t !!!! */
+ /* x=cmpxchg(&edge->edge_used, x, x-1); */
+ /* Next alternative could be more portable */
+ x=__cmpxchg(&edge->edge_used, x, x-1, sizeof(atomic_t));
+ /* If even this does not help, comment out CAN_HAVE_ARCH_CMPXCHG in can_sysdep.h */
+ } while(x!=y);
+}
+#endif
+
+static inline
+struct canque_edge_t *canque_first_inedge(struct canque_ends_t *qends)
+{
+ can_spin_irqflags_t flags;
+ struct list_head *entry;
+ struct canque_edge_t *edge;
+
+ can_spin_lock_irqsave(&qends->ends_lock, flags);
+ entry=qends->inlist.next;
+ skip_dead:
+ if(entry != &qends->inlist) {
+ edge=list_entry(entry,struct canque_edge_t,inpeers);
+ if(canque_fifo_test_fl(&edge->fifo,DEAD)) {
+ entry=entry->next;
+ goto skip_dead;
+ }
+ canque_edge_incref(edge);
+ } else {
+ edge=NULL;
+ }
+ can_spin_unlock_irqrestore(&qends->ends_lock, flags);
+ return edge;
+}
+
+
+static inline
+struct canque_edge_t *canque_next_inedge(struct canque_ends_t *qends, struct canque_edge_t *edge)
+{
+ can_spin_irqflags_t flags;
+ struct list_head *entry;
+ struct canque_edge_t *next;
+
+ can_spin_lock_irqsave(&qends->ends_lock, flags);
+ entry=edge->inpeers.next;
+ skip_dead:
+ if(entry != &qends->inlist) {
+ next=list_entry(entry,struct canque_edge_t,inpeers);
+ if(canque_fifo_test_fl(&edge->fifo,DEAD)) {
+ entry=entry->next;
+ goto skip_dead;
+ }
+ canque_edge_incref(next);
+ } else {
+ next=NULL;
+ }
+ can_spin_unlock_irqrestore(&qends->ends_lock, flags);
+ canque_edge_decref(edge);
+ return next;
+}
+
+#define canque_for_each_inedge(qends, edge) \
+ for(edge=canque_first_inedge(qends);edge;edge=canque_next_inedge(qends, edge))
+
+static inline
+struct canque_edge_t *canque_first_outedge(struct canque_ends_t *qends)
+{
+ can_spin_irqflags_t flags;
+ struct list_head *entry;
+ struct canque_edge_t *edge;
+
+ can_spin_lock_irqsave(&qends->ends_lock, flags);
+ entry=qends->outlist.next;
+ skip_dead:
+ if(entry != &qends->outlist) {
+ edge=list_entry(entry,struct canque_edge_t,outpeers);
+ if(canque_fifo_test_fl(&edge->fifo,DEAD)) {
+ entry=entry->next;
+ goto skip_dead;
+ }
+ canque_edge_incref(edge);
+ } else {
+ edge=NULL;
+ }
+ can_spin_unlock_irqrestore(&qends->ends_lock, flags);
+ return edge;
+}
+
+
+static inline
+struct canque_edge_t *canque_next_outedge(struct canque_ends_t *qends, struct canque_edge_t *edge)
+{
+ can_spin_irqflags_t flags;
+ struct list_head *entry;
+ struct canque_edge_t *next;
+
+ can_spin_lock_irqsave(&qends->ends_lock, flags);
+ entry=edge->outpeers.next;
+ skip_dead:
+ if(entry != &qends->outlist) {
+ next=list_entry(entry,struct canque_edge_t,outpeers);
+ if(canque_fifo_test_fl(&edge->fifo,DEAD)) {
+ entry=entry->next;
+ goto skip_dead;
+ }
+ canque_edge_incref(next);
+ } else {
+ next=NULL;
+ }
+ can_spin_unlock_irqrestore(&qends->ends_lock, flags);
+ canque_edge_decref(edge);
+ return next;
+}
+
+#define canque_for_each_outedge(qends, edge) \
+ for(edge=canque_first_outedge(qends);edge;edge=canque_next_outedge(qends, edge))
+
+/* Linux kernel specific functions */
+
+int canque_fifo_init_kern(struct canque_fifo_t *fifo, int slotsnr);
+
+int canque_fifo_done_kern(struct canque_fifo_t *fifo);
+
+struct canque_edge_t *canque_new_edge_kern(int slotsnr);
+
+int canque_get_inslot4id_wait_kern(struct canque_ends_t *qends,
+ struct canque_edge_t **qedgep, struct canque_slot_t **slotp,
+ int cmd, unsigned long id, int prio);
+
+int canque_get_outslot_wait_kern(struct canque_ends_t *qends,
+ struct canque_edge_t **qedgep, struct canque_slot_t **slotp);
+
+int canque_sync_wait_kern(struct canque_ends_t *qends, struct canque_edge_t *qedge);
+
+int canqueue_ends_init_kern(struct canque_ends_t *qends);
+
+int canqueue_ends_dispose_kern(struct canque_ends_t *qends, int sync);
+
+void canqueue_ends_dispose_postpone(struct canque_ends_t *qends);
+
+void canqueue_kern_initialize(void);
+
+#ifdef CAN_WITH_RTL
+
+extern struct tasklet_struct canque_dead_tl; /*publication required only for RTL*/
+
+/* RT-Linux specific functions and variables */
+
+extern int canqueue_rtl_irq;
+
+extern unsigned long canqueue_rtl2lin_pend;
+
+#define CAN_RTL2LIN_PEND_DEAD_b 0
+
+void canqueue_rtl_initialize(void);
+void canqueue_rtl_done(void);
+
+int canqueue_rtl2lin_check_and_pend(struct canque_ends_t *qends,
+ struct canque_edge_t *qedge, int what);
+
+struct canque_edge_t *canque_new_edge_rtl(int slotsnr);
+
+void canque_dispose_edge_rtl(struct canque_edge_t *qedge);
+
+int canque_get_inslot4id_wait_rtl(struct canque_ends_t *qends,
+ struct canque_edge_t **qedgep, struct canque_slot_t **slotp,
+ int cmd, unsigned long id, int prio);
+
+int canque_get_outslot_wait_rtl(struct canque_ends_t *qends,
+ struct canque_edge_t **qedgep, struct canque_slot_t **slotp);
+
+int canque_sync_wait_rtl(struct canque_ends_t *qends, struct canque_edge_t *qedge);
+
+void canque_ends_free_rtl(struct canque_ends_t *qends);
+
+int canqueue_ends_init_rtl(struct canque_ends_t *qends);
+
+int canqueue_ends_dispose_rtl(struct canque_ends_t *qends, int sync);
+
+#else /*CAN_WITH_RTL*/
+
+static inline int canqueue_rtl2lin_check_and_pend(struct canque_ends_t *qends,
+ struct canque_edge_t *qedge, int what) { return 0; }
+
+#endif /*CAN_WITH_RTL*/
+
+
+#endif /*_CAN_QUEUE_H*/
--- /dev/null
+/* can_sysdep.h - hides differences between individual Linux kernel
+ * versions and RT extensions
+ * Linux CAN-bus device driver.
+ * Written by Pavel Pisa - OCERA team member
+ * email:pisa@cmp.felk.cvut.cz
+ * This software is released under the GPL-License.
+ * Version lincan-0.3 17 Jun 2004
+ */
+
+#ifndef _CAN_SYSDEP_H
+#define _CAN_SYSDEP_H
+
+#ifdef CAN_WITH_RTL
+#include <rtl.h>
+#include <rtl_sync.h>
+#include <rtl_core.h>
+#include <rtl_mutex.h>
+#include <rtl_sched.h>
+#include <time.h>
+#endif /*CAN_WITH_RTL*/
+
+/*#define __NO_VERSION__*/
+/*#include <linux/module.h>*/
+
+#include <linux/version.h>
+#include <linux/wait.h>
+#include <linux/list.h>
+#include <linux/fs.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <asm/errno.h>
+
+#include <asm/io.h>
+#include <asm/atomic.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+#include "lincan_config.h"
+
+/*optional features*/
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,0))
+#define CAN_ENABLE_KERN_FASYNC
+#ifdef CONFIG_PCI
+#define CAN_ENABLE_PCI_SUPPORT
+#endif
+#ifdef CONFIG_OC_LINCANVME
+#define CAN_ENABLE_VME_SUPPORT
+#endif
+#endif
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,0))
+#include <linux/malloc.h>
+#else
+#include <linux/slab.h>
+#endif
+
+#ifdef CAN_ENABLE_PCI_SUPPORT
+#include "linux/pci.h"
+#endif /*CAN_ENABLE_PCI_SUPPORT*/
+
+/* Next is not sctrictly correct, because of 2.3.0, 2.3.1, 2.3.2
+ kernels need next definitions too */
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,2,19)) /* may need correction */
+ #define wait_queue_head_t struct wait_queue *
+ #define wait_queue_t struct wait_queue
+ #define init_waitqueue_head(queue_head) (*queue_head=NULL)
+ #define init_waitqueue_entry(qentry,qtask) \
+ (qentry->next=NULL,qentry->task=qtask)
+ #define DECLARE_WAIT_QUEUE_HEAD(name) \
+ struct wait_queue * name=NULL
+ #define DECLARE_WAITQUEUE(wait, current) \
+ struct wait_queue wait = { current, NULL }
+ #define init_MUTEX(sem) (*sem=MUTEX)
+ #define DECLARE_MUTEX(name) struct semaphore name=MUTEX
+#endif /* 2.2.19 */
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,0)) && !defined(DECLARE_TASKLET)
+ #define tasklet_struct tq_struct
+ #define DECLARE_TASKLET(_name, _func, _data) \
+ struct tq_struct _name = { sync: 0, routine: _func, data: (void*)_data }
+
+ /* void tasklet_init(struct tasklet_struct *t, void (*func)(unsigned long), unsigned long data); */
+ #define tasklet_init(_tasklet, _func, _data) \
+ do{ \
+ /* (_tasklet)->next=NULL; */ \
+ /* Above not needed for 2.2.x and buggy for 2.4.x */ \
+ (_tasklet)->sync=0; \
+ (_tasklet)->routine=_func; \
+ (_tasklet)->data=(void*)_data; \
+ }while(0)
+
+ /* void tasklet_schedule(struct tasklet_struct *t) */
+ #define tasklet_schedule(_tasklet) \
+ do{ \
+ queue_task(_tasklet,&tq_immediate); \
+ mark_bh(IMMEDIATE_BH); \
+ }while(0)
+
+ /* void tasklet_kill(struct tasklet_struct *t); */
+ #define tasklet_kill(_tasklet) \
+ synchronize_irq()
+
+#endif /* 2.4.0 */
+
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,7)) || (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
+
+#define MINOR_NR \
+ (MINOR(file->f_dentry->d_inode->i_rdev))
+
+#else /* Linux kernel < 2.5.7 or >= 2.6.0 */
+
+#define MINOR_NR \
+ (minor(file->f_dentry->d_inode->i_rdev))
+
+#endif /* Linux kernel < 2.5.7 or >= 2.6.0 */
+
+#ifndef CAN_WITH_RTL
+#if ((LINUX_VERSION_CODE < KERNEL_VERSION(2,5,68)) && !defined(IRQ_RETVAL))
+ typedef void can_irqreturn_t;
+ #define CAN_IRQ_NONE
+ #define CAN_IRQ_HANDLED
+ #define CAN_IRQ_RETVAL(x)
+#else /* <=2.5.67 */
+ typedef irqreturn_t can_irqreturn_t;
+ #define CAN_IRQ_NONE IRQ_NONE
+ #define CAN_IRQ_HANDLED IRQ_HANDLED
+ #define CAN_IRQ_RETVAL IRQ_RETVAL
+#endif /* <=2.5.67 */
+#else /*CAN_WITH_RTL*/
+ typedef int can_irqreturn_t;
+ #define CAN_IRQ_NONE 0
+ #define CAN_IRQ_HANDLED 1
+ #define CAN_IRQ_RETVAL(x) ((x) != 0)
+#endif /*CAN_WITH_RTL*/
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,33))
+ #define can_synchronize_irq(irqnum) synchronize_irq()
+#else /* >=2.5.33 */
+ #define can_synchronize_irq synchronize_irq
+#endif
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,0))
+ #define del_timer_sync del_timer
+#endif /* <2.4.0 */
+
+#ifdef __HAVE_ARCH_CMPXCHG
+ #define CAN_HAVE_ARCH_CMPXCHG
+#endif
+
+#ifndef CAN_WITH_RTL
+/* Standard LINUX kernel */
+
+#define can_spinlock_t spinlock_t
+#define can_spin_irqflags_t unsigned long
+#define can_spin_lock spin_lock
+#define can_spin_unlock spin_unlock
+#define can_spin_lock_irqsave spin_lock_irqsave
+#define can_spin_unlock_irqrestore spin_unlock_irqrestore
+#define can_spin_lock_init spin_lock_init
+
+#ifndef DEFINE_SPINLOCK
+#define CAN_DEFINE_SPINLOCK(x) can_spinlock_t x = SPIN_LOCK_UNLOCKED
+#else /*DEFINE_SPINLOCK*/
+#define CAN_DEFINE_SPINLOCK DEFINE_SPINLOCK
+#endif /*DEFINE_SPINLOCK*/
+
+#if defined(CONFIG_PREEMPT) || (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
+#define can_preempt_disable preempt_disable
+#define can_preempt_enable preempt_enable
+#else /*CONFIG_PREEMPT*/
+#define can_preempt_disable() do { } while (0)
+#define can_preempt_enable() do { } while (0)
+#endif /*CONFIG_PREEMPT*/
+
+#define can_enable_irq enable_irq
+#define can_disable_irq disable_irq
+
+#define can_printk printk
+
+/* CAN message timestamp source, it is called from interrupt context */
+#define can_gettimeofday do_gettimeofday
+
+#else /*CAN_WITH_RTL*/
+
+#define can_spinlock_t rtl_spinlock_t
+#define can_spin_irqflags_t rtl_irqstate_t
+#define can_spin_lock rtl_spin_lock
+#define can_spin_unlock rtl_spin_unlock
+#define can_spin_lock_irqsave rtl_spin_lock_irqsave
+#define can_spin_unlock_irqrestore rtl_spin_unlock_irqrestore
+#define can_spin_lock_init rtl_spin_lock_init
+
+#define CAN_DEFINE_SPINLOCK(x) can_spinlock_t x = SPIN_LOCK_UNLOCKED
+
+#define can_preempt_disable() do { } while (0)
+#define can_preempt_enable() do { } while (0)
+
+#define can_enable_irq rtl_hard_enable_irq
+#define can_disable_irq rtl_hard_disable_irq
+
+#define can_printk rtl_printf
+
+/*
+ * terrible hack to test rtl_file private_data concept, ugh !!!
+ * this would result in crash on architectures, where
+ * sizeof(int) < sizeof(void *)
+ */
+#define can_set_rtl_file_private_data(fptr, p) do{ fptr->f_minor=(long)(p); } while(0)
+#define can_get_rtl_file_private_data(fptr) ((void*)((fptr)->f_minor))
+
+extern can_spinlock_t can_irq_manipulation_lock;
+
+/* CAN message timestamp source, it is called from interrupt context */
+#define can_gettimeofday(ptr) do {\
+ struct timespec temp_timespec;\
+ clock_gettime(CLOCK_REALTIME,&temp_timespec);\
+ ptr->tv_usec=temp_timespec.tv_nsec/1000;\
+ ptr->tv_sec=temp_timespec.tv_sec;\
+ } while(0)
+
+#endif /*CAN_WITH_RTL*/
+
+#endif /*_CAN_SYSDEP_H*/
--- /dev/null
+/* can_sysdep.h - hides differences between individual Linux kernel
+ * versions and RT extensions
+ * Linux CAN-bus device driver.
+ * Written by Pavel Pisa - OCERA team member
+ * email:pisa@cmp.felk.cvut.cz
+ * This software is released under the GPL-License.
+ * Version lincan-0.3 17 Jun 2004
+ */
+
+#ifndef _CAN_SYSDEP_H
+#define _CAN_SYSDEP_H
+
+#ifdef CAN_WITH_RTL
+#include <rtl.h>
+#include <rtl_sync.h>
+#include <rtl_core.h>
+#include <rtl_mutex.h>
+#include <rtl_sched.h>
+#include <time.h>
+#endif /*CAN_WITH_RTL*/
+
+#include <cpu_def.h>
+#include <malloc.h>
+
+// typedef unsigned long atomic_t;
+typedef struct { volatile int counter; } atomic_t;
+
+#define mb() __memory_barrier()
+
+/**
+ * container_of - cast a member of a structure out to the containing structure
+ * @ptr: the pointer to the member.
+ * @type: the type of the container struct this is embedded in.
+ * @member: the name of the member within the struct.
+ *
+ */
+#define container_of(ptr, type, member) ({ \
+ const typeof( ((type *)0)->member ) *__mptr = (ptr); \
+ (type *)( (char *)__mptr - offsetof(type,member) );})
+
+
+/*#define __NO_VERSION__*/
+/*#include <linux/module.h>*/
+
+// #include <linux/version.h>
+// #include <linux/wait.h>
+// #include <linux/list.h>
+// #include <linux/fs.h>
+// #include <linux/ioport.h>
+// #include <linux/delay.h>
+// #include <linux/sched.h>
+// #include <linux/interrupt.h>
+// #include <asm/errno.h>
+//
+// #include <asm/io.h>
+// #include <asm/atomic.h>
+// #include <asm/irq.h>
+// #include <asm/uaccess.h>
+
+// #include "lincan_config.h"
+
+/*optional features*/
+// #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,0))
+// #define CAN_ENABLE_KERN_FASYNC
+// #ifdef CONFIG_PCI
+// #define CAN_ENABLE_PCI_SUPPORT
+// #endif
+// #ifdef CONFIG_OC_LINCANVME
+// #define CAN_ENABLE_VME_SUPPORT
+// #endif
+// #endif
+
+// #if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,0))
+// #include <linux/malloc.h>
+// #else
+// #include <linux/slab.h>
+// #endif
+
+// #ifdef CAN_ENABLE_PCI_SUPPORT
+// #include "linux/pci.h"
+// #endif /*CAN_ENABLE_PCI_SUPPORT*/
+
+/* Next is not sctrictly correct, because of 2.3.0, 2.3.1, 2.3.2
+ kernels need next definitions too */
+// #if (LINUX_VERSION_CODE < KERNEL_VERSION(2,2,19)) /* may need correction */
+ #define wait_queue_head_t struct wait_queue *
+ #define wait_queue_t struct wait_queue
+ #define init_waitqueue_head(queue_head) (*queue_head=NULL)
+ #define init_waitqueue_entry(qentry,qtask) \
+ (qentry->next=NULL,qentry->task=qtask)
+ #define DECLARE_WAIT_QUEUE_HEAD(name) \
+ struct wait_queue * name=NULL
+ #define DECLARE_WAITQUEUE(wait, current) \
+ struct wait_queue wait = { current, NULL }
+// #define init_MUTEX(sem) (*sem=MUTEX)
+// #define DECLARE_MUTEX(name) struct semaphore name=MUTEX
+// #endif /* 2.2.19 */
+
+// #if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,0)) && !defined(DECLARE_TASKLET)
+// #define tasklet_struct tq_struct
+/* #define DECLARE_TASKLET(_name, _func, _data) \
+ struct tq_struct _name = { sync: 0, routine: _func, data: (void*)_data }*/
+//
+// /* void tasklet_init(struct tasklet_struct *t, void (*func)(unsigned long), unsigned long data); */
+/* #define tasklet_init(_tasklet, _func, _data) \
+ do{ \
+ (_tasklet)->sync=0; \
+ (_tasklet)->routine=_func; \
+ (_tasklet)->data=(void*)_data; \
+ }while(0)*/
+//
+// /* void tasklet_schedule(struct tasklet_struct *t) */
+/* #define tasklet_schedule(_tasklet) \
+ do{ \
+ queue_task(_tasklet,&tq_immediate); \
+ mark_bh(IMMEDIATE_BH); \
+ }while(0)*/
+//
+// /* void tasklet_kill(struct tasklet_struct *t); */
+/* #define tasklet_kill(_tasklet) \
+ synchronize_irq()*/
+//
+// #endif /* 2.4.0 */
+
+
+// #if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,7)) || (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
+
+#define MINOR_NR \
+ (MINOR(file->f_dentry->d_inode->i_rdev))
+
+// #else /* Linux kernel < 2.5.7 or >= 2.6.0 */
+//
+/*#define MINOR_NR \
+ (minor(file->f_dentry->d_inode->i_rdev))*/
+//
+// #endif /* Linux kernel < 2.5.7 or >= 2.6.0 */
+
+// #ifndef CAN_WITH_RTL
+// #if ((LINUX_VERSION_CODE < KERNEL_VERSION(2,5,68)) && !defined(IRQ_RETVAL))
+ typedef void can_irqreturn_t;
+ #define CAN_IRQ_NONE
+ #define CAN_IRQ_HANDLED
+ #define CAN_IRQ_RETVAL(x)
+// #else /* <=2.5.67 */
+// typedef irqreturn_t can_irqreturn_t;
+// #define CAN_IRQ_NONE IRQ_NONE
+// #define CAN_IRQ_HANDLED IRQ_HANDLED
+// #define CAN_IRQ_RETVAL IRQ_RETVAL
+// #endif /* <=2.5.67 */
+// #if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19))
+/* #define CAN_IRQ_HANDLER_ARGS(irq_number, dev_id) \
+ int irq_number, void *dev_id, struct pt_regs *regs*/
+// #else /* < 2.6.19 */
+ #define CAN_IRQ_HANDLER_ARGS(irq_number, dev_id) \
+ int irq_number, void *dev_id
+// #endif /* < 2.6.19 */
+// #else /*CAN_WITH_RTL*/
+// typedef int can_irqreturn_t;
+// #define CAN_IRQ_NONE 0
+// #define CAN_IRQ_HANDLED 1
+// #define CAN_IRQ_RETVAL(x) ((x) != 0)
+/* #define CAN_IRQ_HANDLER_ARGS(irq_number, dev_id) \
+ int irq_number, void *dev_id, struct pt_regs *regs*/
+// #endif /*CAN_WITH_RTL*/
+
+// #if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,33))
+// #define can_synchronize_irq(irqnum) synchronize_irq()
+// #else /* >=2.5.33 */
+ #define can_synchronize_irq synchronize_irq
+// #endif
+
+// #if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,0))
+// #define del_timer_sync del_timer
+// #endif /* <2.4.0 */
+
+// #if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,9))
+ typedef unsigned long can_ioptr_t;
+ #define can_ioptr2ulong(ioaddr) ((unsigned long)(ioaddr))
+ #define can_ulong2ioptr(addr) ((unsigned long)(addr))
+ #define can_inb(ioaddr) inb(ioaddr)
+ #define can_outb(data,ioaddr) outb(data,ioaddr)
+ #define can_inw(ioaddr) inb(ioaddr)
+ #define can_outw(data,ioaddr) outb(data,ioaddr)
+ #define can_inl(ioaddr) inb(ioaddr)
+ #define can_outl(data,ioaddr) outb(data,ioaddr)
+// #else /* >=2.6.9 */
+// typedef void __iomem * can_ioptr_t;
+// #define can_ioptr2ulong(ioaddr) ((unsigned long __force)(ioaddr))
+// #define can_ulong2ioptr(addr) ((can_ioptr_t)(addr))
+// #define can_inb(ioaddr) inb(can_ioptr2ulong(ioaddr))
+// #define can_outb(data,ioaddr) outb(data,can_ioptr2ulong(ioaddr))
+// #define can_inw(ioaddr) inb(can_ioptr2ulong(ioaddr))
+// #define can_outw(data,ioaddr) outb(data,can_ioptr2ulong(ioaddr))
+// #define can_inl(ioaddr) inb(can_ioptr2ulong(ioaddr))
+// #define can_outl(data,ioaddr) outb(data,can_ioptr2ulong(ioaddr))
+// #endif
+
+#define can_readb readb
+#define can_writeb writeb
+#define can_readw readw
+#define can_writew writew
+#define can_readl readl
+#define can_writel writel
+
+#define can_ioport2ioptr can_ulong2ioptr
+
+#ifdef __HAVE_ARCH_CMPXCHG
+ #define CAN_HAVE_ARCH_CMPXCHG
+#endif
+
+// #ifndef CAN_WITH_RTL
+/* Standard LINUX kernel */
+
+#define can_spinlock_t long
+#define can_spin_irqflags_t unsigned long
+#define can_spin_lock(lock) cli()
+#define can_spin_unlock(lock) sti()
+#define can_spin_lock_irqsave(lock,flags) save_and_cli(flags)
+#define can_spin_unlock_irqrestore(lock,flags) restore_flags(flags)
+#define can_spin_lock_init can_splck_init
+
+#define CAN_DEFINE_SPINLOCK(x) can_spinlock_t x = 0
+
+static inline
+void can_splck_init(can_spinlock_t *x)
+{
+ *x=0;
+}
+
+// #if !defined(CONFIG_PREEMPT_RT) && ( defined(CONFIG_PREEMPT) || (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)) )
+// #define can_preempt_disable preempt_disable
+// #define can_preempt_enable preempt_enable
+// #else /*CONFIG_PREEMPT*/
+#define can_preempt_disable() do { } while (0)
+#define can_preempt_enable() do { } while (0)
+// #endif /*CONFIG_PREEMPT*/
+
+// #define can_enable_irq sti()
+// #define can_disable_irq cli()
+#define can_enable_irq(var) (var=1)
+#define can_disable_irq(var) (var=0)
+
+#define can_printk printf
+#define KERN_CRIT
+#define KERN_ERR
+
+/// LINUX src: include/asm-arm/bitops.h
+
+#define set_bit ____atomic_set_bit
+#define clear_bit ____atomic_clear_bit
+#define change_bit ____atomic_change_bit
+#define test_and_set_bit ____atomic_test_and_set_bit
+#define test_and_clear_bit ____atomic_test_and_clear_bit
+#define test_and_change_bit ____atomic_test_and_change_bit
+#define raw_local_irq_save(flags) save_and_cli(flags);
+#define raw_local_irq_restore(flags) restore_flags(flags);
+/*
+ * These functions are the basis of our bit ops.
+ *
+ * First, the atomic bitops. These use native endian.
+ */
+static inline void ____atomic_set_bit(unsigned int bit, volatile unsigned long *p)
+{
+ unsigned long flags;
+ unsigned long mask = 1UL << (bit & 31);
+
+ p += bit >> 5;
+
+ raw_local_irq_save(flags);
+ *p |= mask;
+ raw_local_irq_restore(flags);
+}
+
+static inline void ____atomic_clear_bit(unsigned int bit, volatile unsigned long *p)
+{
+ unsigned long flags;
+ unsigned long mask = 1UL << (bit & 31);
+
+ p += bit >> 5;
+
+ raw_local_irq_save(flags);
+ *p &= ~mask;
+ raw_local_irq_restore(flags);
+}
+
+static inline void ____atomic_change_bit(unsigned int bit, volatile unsigned long *p)
+{
+ unsigned long flags;
+ unsigned long mask = 1UL << (bit & 31);
+
+ p += bit >> 5;
+
+ raw_local_irq_save(flags);
+ *p ^= mask;
+ raw_local_irq_restore(flags);
+}
+
+static inline int
+____atomic_test_and_set_bit(unsigned int bit, volatile unsigned long *p)
+{
+ unsigned long flags;
+ unsigned int res;
+ unsigned long mask = 1UL << (bit & 31);
+
+ p += bit >> 5;
+
+ raw_local_irq_save(flags);
+ res = *p;
+ *p = res | mask;
+ raw_local_irq_restore(flags);
+
+ return res & mask;
+}
+
+static inline int
+____atomic_test_and_clear_bit(unsigned int bit, volatile unsigned long *p)
+{
+ unsigned long flags;
+ unsigned int res;
+ unsigned long mask = 1UL << (bit & 31);
+
+ p += bit >> 5;
+
+ raw_local_irq_save(flags);
+ res = *p;
+ *p = res & ~mask;
+ raw_local_irq_restore(flags);
+
+ return res & mask;
+}
+
+static inline int
+____atomic_test_and_change_bit(unsigned int bit, volatile unsigned long *p)
+{
+ unsigned long flags;
+ unsigned int res;
+ unsigned long mask = 1UL << (bit & 31);
+
+ p += bit >> 5;
+
+ raw_local_irq_save(flags);
+ res = *p;
+ *p = res ^ mask;
+ raw_local_irq_restore(flags);
+
+ return res & mask;
+}
+
+/// LINUX src: include/asm-arm/atomic.h
+
+#define atomic_read(v) ((v)->counter)
+
+#define atomic_set(v,i) (((v)->counter) = (i))
+
+static inline int atomic_add_return(int i, atomic_t *v)
+{
+ unsigned long flags;
+ int val;
+
+ raw_local_irq_save(flags);
+ val = v->counter;
+ v->counter = val += i;
+ raw_local_irq_restore(flags);
+
+ return val;
+}
+
+static inline int atomic_sub_return(int i, atomic_t *v)
+{
+ unsigned long flags;
+ int val;
+
+ raw_local_irq_save(flags);
+ val = v->counter;
+ v->counter = val -= i;
+ raw_local_irq_restore(flags);
+
+ return val;
+}
+
+static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
+{
+ int ret;
+ unsigned long flags;
+
+ raw_local_irq_save(flags);
+ ret = v->counter;
+ if (ret == old)
+ v->counter = new;
+ raw_local_irq_restore(flags);
+
+ return ret;
+}
+
+#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+
+static inline int atomic_add_unless(atomic_t *v, int a, int u)
+{
+ int c, old;
+
+ c = atomic_read(v);
+ while (c != u && (old = atomic_cmpxchg((v), c, c + a)) != c)
+ c = old;
+ return c != u;
+}
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
+#define atomic_add(i, v) (void) atomic_add_return(i, v)
+#define atomic_inc(v) (void) atomic_add_return(1, v)
+#define atomic_sub(i, v) (void) atomic_sub_return(i, v)
+#define atomic_dec(v) (void) atomic_sub_return(1, v)
+
+#define atomic_inc_and_test(v) (atomic_add_return(1, v) == 0)
+#define atomic_dec_and_test(v) (atomic_sub_return(1, v) == 0)
+#define atomic_inc_return(v) (atomic_add_return(1, v))
+#define atomic_dec_return(v) (atomic_sub_return(1, v))
+#define atomic_sub_and_test(i, v) (atomic_sub_return(i, v) == 0)
+
+#define atomic_add_negative(i,v) (atomic_add_return(i, v) < 0)
+
+/* Atomic operations are already serializing on ARM */
+#define smp_mb__before_atomic_dec() barrier()
+#define smp_mb__after_atomic_dec() barrier()
+#define smp_mb__before_atomic_inc() barrier()
+#define smp_mb__after_atomic_inc() barrier()
+
+/// LINUX src: include/linux/interrupt.h
+
+#define ATOMIC_INIT(i) { (i) }
+
+/* Tasklets --- multithreaded analogue of BHs.
+
+ Main feature differing them of generic softirqs: tasklet
+ is running only on one CPU simultaneously.
+
+ Main feature differing them of BHs: different tasklets
+ may be run simultaneously on different CPUs.
+
+ Properties:
+ * If tasklet_schedule() is called, then tasklet is guaranteed
+ to be executed on some cpu at least once after this.
+ * If the tasklet is already scheduled, but its excecution is still not
+ started, it will be executed only once.
+ * If this tasklet is already running on another CPU (or schedule is called
+ from tasklet itself), it is rescheduled for later.
+ * Tasklet is strictly serialized wrt itself, but not
+ wrt another tasklets. If client needs some intertask synchronization,
+ he makes it with spinlocks.
+ */
+
+struct tasklet_struct
+{
+ struct tasklet_struct *next;
+ unsigned long state;
+ atomic_t count;
+ void (*func)(unsigned long);
+ unsigned long data;
+};
+
+#define DECLARE_TASKLET(name, func, data) \
+struct tasklet_struct name = { NULL, 0, ATOMIC_INIT(0), func, data }
+
+#define DECLARE_TASKLET_DISABLED(name, func, data) \
+struct tasklet_struct name = { NULL, 0, ATOMIC_INIT(1), func, data }
+
+/* CAN message timestamp source, it is called from interrupt context */
+//#define can_gettimeofday do_gettimeofday
+
+/// from linux/timer.h
+
+struct tvec_t_base_s;
+
+struct timer_list {
+ struct list_head entry;
+ unsigned long expires;
+
+ void (*function)(unsigned long);
+ unsigned long data;
+
+ struct tvec_t_base_s *base;
+#ifdef CONFIG_TIMER_STATS
+ void *start_site;
+ char start_comm[16];
+ int start_pid;
+#endif
+};
+
+static inline void udelay(long time)
+{
+ volatile long ticks=(time * CCLK) / 2000000;
+ do{
+ ticks--;
+ }
+ while(ticks>0);
+}
+
+// #else /*CAN_WITH_RTL*/
+//
+// #define can_spinlock_t long
+// #define can_spin_irqflags_t unsigned long
+// #define can_spin_lock save_and_cli
+// #define can_spin_unlock restore_flags
+// #define can_spin_lock_irqsave save_and_cli
+// #define can_spin_unlock_irqrestore restore_flags
+// #define can_spin_lock_init can_splck_init
+//
+// #define CAN_DEFINE_SPINLOCK(x) can_spinlock_t x = 0
+//
+// #define can_preempt_disable() do { } while (0)
+// #define can_preempt_enable() do { } while (0)
+//
+// #define can_enable_irq sti
+// #define can_disable_irq cli
+//
+// #define can_printk rtl_printf
+//
+// /*
+// * terrible hack to test rtl_file private_data concept, ugh !!!
+// * this would result in crash on architectures, where
+// * sizeof(int) < sizeof(void *)
+// */
+// #define can_set_rtl_file_private_data(fptr, p) do{ fptr->f_minor=(long)(p); } while(0)
+// #define can_get_rtl_file_private_data(fptr) ((void*)((fptr)->f_minor))
+//
+// extern can_spinlock_t can_irq_manipulation_lock;
+//
+// /* CAN message timestamp source, it is called from interrupt context */
+/*#define can_gettimeofday(ptr) do {\
+ struct timespec temp_timespec;\
+ clock_gettime(CLOCK_REALTIME,&temp_timespec);\
+ ptr->tv_usec=temp_timespec.tv_nsec/1000;\
+ ptr->tv_sec=temp_timespec.tv_sec;\
+ } while(0)*/
+//
+// #endif /*CAN_WITH_RTL*/
+
+#endif /*_CAN_SYSDEP_H*/
--- /dev/null
+/* canmsg.h - common kernel-space and user-space CAN message structure
+ * Linux CAN-bus device driver.
+ * Written by Pavel Pisa - OCERA team member
+ * email:pisa@cmp.felk.cvut.cz
+ * This software is released under the GPL-License.
+ * Version lincan-0.3 17 Jun 2004
+ */
+
+#ifndef _CANMSG_T_H
+#define _CANMSG_T_H
+
+#ifdef __KERNEL__
+
+#include <linux/time.h>
+#include <linux/types.h>
+
+#else /* __KERNEL__ */
+
+#include <sys/time.h>
+#include <sys/types.h>
+
+#endif /* __KERNEL__ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*
+ * CAN_MSG_VERSION_2 enables new canmsg_t layout compatible with
+ * can4linux project from http://www.port.de/
+ *
+ */
+#define CAN_MSG_VERSION_2
+
+/* Number of data bytes in one CAN message */
+#define CAN_MSG_LENGTH 8
+
+#ifdef CAN_MSG_VERSION_2
+
+typedef struct timeval canmsg_tstamp_t ;
+
+typedef unsigned long canmsg_id_t;
+
+/**
+ * struct canmsg_t - structure representing CAN message
+ * @flags: message flags
+ * %MSG_RTR .. message is Remote Transmission Request,
+ * %MSG_EXT .. message with extended ID,
+ * %MSG_OVR .. indication of queue overflow condition,
+ * %MSG_LOCAL .. message originates from this node.
+ * @cob: communication object number (not used)
+ * @id: ID of CAN message
+ * @timestamp: not used
+ * @length: length of used data
+ * @data: data bytes buffer
+ *
+ * Header: canmsg.h
+ */
+struct canmsg_t {
+ int flags;
+ int cob;
+ canmsg_id_t id;
+ canmsg_tstamp_t timestamp;
+ unsigned short length;
+ unsigned char data[CAN_MSG_LENGTH];
+};
+
+#else /*CAN_MSG_VERSION_2*/
+#ifndef PACKED
+#define PACKED __attribute__((packed))
+#endif
+/* Old, deprecated version of canmsg_t structure */
+struct canmsg_t {
+ short flags;
+ int cob;
+ canmsg_id_t id;
+ unsigned long timestamp;
+ unsigned int length;
+ unsigned char data[CAN_MSG_LENGTH];
+} PACKED;
+#endif /*CAN_MSG_VERSION_2*/
+
+typedef struct canmsg_t canmsg_t;
+
+/**
+ * struct canfilt_t - structure for acceptance filter setup
+ * @flags: message flags
+ * %MSG_RTR .. message is Remote Transmission Request,
+ * %MSG_EXT .. message with extended ID,
+ * %MSG_OVR .. indication of queue overflow condition,
+ * %MSG_LOCAL .. message originates from this node.
+ * there are corresponding mask bits
+ * %MSG_RTR_MASK, %MSG_EXT_MASK, %MSG_LOCAL_MASK.
+ * %MSG_PROCESSLOCAL enables local messages processing in the
+ * combination with global setting
+ * @queid: CAN queue identification in the case of the multiple
+ * queues per one user (open instance)
+ * @cob: communication object number (not used)
+ * @id: selected required value of cared ID id bits
+ * @mask: select bits significand for the comparation;
+ * 1 .. take care about corresponding ID bit, 0 .. don't care
+ *
+ * Header: canmsg.h
+ */
+struct canfilt_t {
+ int flags;
+ int queid;
+ int cob;
+ canmsg_id_t id;
+ canmsg_id_t mask;
+};
+
+typedef struct canfilt_t canfilt_t;
+
+/* Definitions to use for canmsg_t and canfilt_t flags */
+#define MSG_RTR (1<<0)
+#define MSG_OVR (1<<1)
+#define MSG_EXT (1<<2)
+#define MSG_LOCAL (1<<3)
+/* If you change above lines, check canque_filtid2internal function */
+
+/* Additional definitions used for canfilt_t only */
+#define MSG_FILT_MASK_SHIFT 8
+#define MSG_RTR_MASK (MSG_RTR<<MSG_FILT_MASK_SHIFT)
+#define MSG_EXT_MASK (MSG_EXT<<MSG_FILT_MASK_SHIFT)
+#define MSG_LOCAL_MASK (MSG_LOCAL<<MSG_FILT_MASK_SHIFT)
+#define MSG_PROCESSLOCAL (MSG_OVR<<MSG_FILT_MASK_SHIFT)
+
+/* Can message ID mask */
+#define MSG_ID_MASK ((1l<<29)-1)
+
+#ifdef __cplusplus
+} /* extern "C"*/
+#endif
+
+#endif /*_CANMSG_T_H*/
--- /dev/null
+/* constants.h
+ * Header file for the Linux CAN-bus driver.
+ * Written by Arnaud Westenberg email:arnaud@wanadoo.nl
+ * Rewritten for new CAN queues by Pavel Pisa - OCERA team member
+ * email:pisa@cmp.felk.cvut.cz
+ * This software is released under the GPL-License.
+ * Version lincan-0.3 17 Jun 2004
+ */
+
+#ifndef __CONSTANTS_H__
+#define __CONSTANTS_H__
+
+/* Device name as it will appear in /proc/devices */
+#define DEVICE_NAME "can"
+
+/* Branch of the driver */
+#define CAN_DRV_BRANCH (('L'<<24)|('I'<<16)|('N'<<8)|'C')
+
+/* Version of the driver */
+#define CAN_DRV_VER_MAJOR 0
+#define CAN_DRV_VER_MINOR 3
+#define CAN_DRV_VER_PATCH 3
+#define CAN_DRV_VER ((CAN_DRV_VER_MAJOR<<16) | (CAN_DRV_VER_MINOR<<8) | CAN_DRV_VER_PATCH)
+
+/* Default driver major number, see /usr/src/linux/Documentation/devices.txt */
+#define CAN_MAJOR 91
+
+/* Definition of the maximum number of concurrent supported hardware boards,
+ * chips per board, total number of chips, interrupts and message objects.
+ * Obviously there are no 32 different interrupts, but each chip can have its
+ * own interrupt so we have to check for it MAX_IRQ == MAX_TOT_CHIPS times.
+ */
+#define MAX_HW_CARDS 8
+#define MAX_HW_CHIPS 4
+#define MAX_TOT_CHIPS (MAX_HW_CHIPS*MAX_HW_CARDS)
+#define MAX_TOT_CHIPS_STR 32 /* must be explicit for MODULE_PARM */
+#define MAX_IRQ 32
+#define MAX_MSGOBJS 32
+#define MAX_TOT_MSGOBJS (MAX_TOT_CHIPS*MAX_MSGOBJS)
+#define MAX_BUF_LENGTH 64
+//#define MAX_BUF_LENGTH 4
+
+
+/* These flags can be used for the msgobj_t structure flags data entry */
+#define MSGOBJ_OPENED_b 0
+#define MSGOBJ_TX_REQUEST_b 1
+#define MSGOBJ_TX_LOCK_b 2
+#define MSGOBJ_IRQ_REQUEST_b 3
+#define MSGOBJ_WORKER_WAKE_b 4
+#define MSGOBJ_FILTCH_REQUEST_b 5
+#define MSGOBJ_RX_MODE_b 6
+#define MSGOBJ_RX_MODE_EXT_b 7
+#define MSGOBJ_TX_PENDING_b 8
+
+#define MSGOBJ_OPENED (1<<MSGOBJ_OPENED_b)
+#define MSGOBJ_TX_REQUEST (1<<MSGOBJ_TX_REQUEST_b)
+#define MSGOBJ_TX_LOCK (1<<MSGOBJ_TX_LOCK_b)
+#define MSGOBJ_IRQ_REQUEST (1<<MSGOBJ_IRQ_REQUEST_b)
+#define MSGOBJ_WORKER_WAKE (1<<MSGOBJ_WORKER_WAKE_b)
+#define MSGOBJ_FILTCH_REQUEST (1<<MSGOBJ_FILTCH_REQUEST_b)
+#define MSGOBJ_RX_MODE (1<<MSGOBJ_RX_MODE_b)
+#define MSGOBJ_RX_MODE_EXT (1<<MSGOBJ_RX_MODE_EXT_b)
+#define MSGOBJ_TX_PENDING (1<<MSGOBJ_TX_PENDING_b)
+
+#define can_msgobj_test_fl(obj,obj_fl) \
+ test_bit(MSGOBJ_##obj_fl##_b,&(obj)->obj_flags)
+#define can_msgobj_set_fl(obj,obj_fl) \
+ set_bit(MSGOBJ_##obj_fl##_b,&(obj)->obj_flags)
+#define can_msgobj_clear_fl(obj,obj_fl) \
+ clear_bit(MSGOBJ_##obj_fl##_b,&(obj)->obj_flags)
+#define can_msgobj_test_and_set_fl(obj,obj_fl) \
+ test_and_set_bit(MSGOBJ_##obj_fl##_b,&(obj)->obj_flags)
+#define can_msgobj_test_and_clear_fl(obj,obj_fl) \
+ test_and_clear_bit(MSGOBJ_##obj_fl##_b,&(obj)->obj_flags)
+
+
+/* These flags can be used for the canchip_t structure flags data entry */
+#define CHIP_ATTACHED (1<<0) /* chip is attached to HW, release_chip() has to be called */
+#define CHIP_CONFIGURED (1<<1) /* chip is configured and prepared for communication */
+#define CHIP_SEGMENTED (1<<2) /* segmented access, ex: i82527 with 16 byte window*/
+#define CHIP_IRQ_SETUP (1<<3) /* IRQ handler has been set */
+#define CHIP_IRQ_PCI (1<<4) /* chip is on PCI board and uses PCI interrupt */
+#define CHIP_IRQ_VME (1<<5) /* interrupt is VME bus and requires VME bridge */
+#define CHIP_IRQ_CUSTOM (1<<6) /* custom interrupt provided by board or chip code */
+#define CHIP_IRQ_FAST (1<<7) /* interrupt handler only schedules postponed processing */
+
+#define CHIP_MAX_IRQLOOP 1000
+
+/* System independent defines of IRQ handled state */
+#define CANCHIP_IRQ_NONE 0
+#define CANCHIP_IRQ_HANDLED 1
+#define CANCHIP_IRQ_ACCEPTED 2
+#define CANCHIP_IRQ_STUCK 3
+
+/* These flags can be used for the candevices_t structure flags data entry */
+#define CANDEV_PROGRAMMABLE_IRQ (1<<0)
+#define CANDEV_IO_RESERVED (1<<1)
+
+/* Next flags are specific for struct canuser_t applications connection */
+#define CANUSER_RTL_CLIENT (1<<0)
+#define CANUSER_RTL_MEM (1<<1)
+#define CANUSER_DIRECT (1<<2)
+
+
+enum timing_BTR1 {
+ MAX_TSEG1 = 15,
+ MAX_TSEG2 = 7
+};
+
+/* Flags for baud_rate function */
+#define BTR1_SAM (1<<1)
+
+#endif
--- /dev/null
+/* devcommon.h - common device code
+ * Linux CAN-bus device driver.
+ * New CAN queues by Pavel Pisa - OCERA team member
+ * email:pisa@cmp.felk.cvut.cz
+ * This software is released under the GPL-License.
+ * Version lincan-0.3 17 Jun 2004
+ */
+
+#include "./canmsg.h"
+#include "./can_sysdep.h"
+#include "./constants.h"
+#include "./can_queue.h"
+
+int canqueue_ends_init_chip(struct canque_ends_t *qends, struct canchip_t *chip, struct msgobj_t *obj);
+int canqueue_ends_done_chip(struct canque_ends_t *qends);
--- /dev/null
+#ifndef _ASM_GENERIC_ERRNO_BASE_H
+#define _ASM_GENERIC_ERRNO_BASE_H
+
+#define EPERM 1 /* Operation not permitted */
+#define ENOENT 2 /* No such file or directory */
+#define ESRCH 3 /* No such process */
+#define EINTR 4 /* Interrupted system call */
+#define EIO 5 /* I/O error */
+#define ENXIO 6 /* No such device or address */
+#define E2BIG 7 /* Argument list too long */
+#define ENOEXEC 8 /* Exec format error */
+#define EBADF 9 /* Bad file number */
+#define ECHILD 10 /* No child processes */
+#define EAGAIN 11 /* Try again */
+#define ENOMEM 12 /* Out of memory */
+#define EACCES 13 /* Permission denied */
+#define EFAULT 14 /* Bad address */
+#define ENOTBLK 15 /* Block device required */
+#define EBUSY 16 /* Device or resource busy */
+#define EEXIST 17 /* File exists */
+#define EXDEV 18 /* Cross-device link */
+#define ENODEV 19 /* No such device */
+#define ENOTDIR 20 /* Not a directory */
+#define EISDIR 21 /* Is a directory */
+#define EINVAL 22 /* Invalid argument */
+#define ENFILE 23 /* File table overflow */
+#define EMFILE 24 /* Too many open files */
+#define ENOTTY 25 /* Not a typewriter */
+#define ETXTBSY 26 /* Text file busy */
+#define EFBIG 27 /* File too large */
+#define ENOSPC 28 /* No space left on device */
+#define ESPIPE 29 /* Illegal seek */
+#define EROFS 30 /* Read-only file system */
+#define EMLINK 31 /* Too many links */
+#define EPIPE 32 /* Broken pipe */
+#define EDOM 33 /* Math argument out of domain of func */
+#define ERANGE 34 /* Math result not representable */
+
+#endif
--- /dev/null
+#ifndef _ASM_GENERIC_ERRNO_H
+#define _ASM_GENERIC_ERRNO_H
+
+#include "./errno-base.h"
+
+#define EDEADLK 35 /* Resource deadlock would occur */
+#define ENAMETOOLONG 36 /* File name too long */
+#define ENOLCK 37 /* No record locks available */
+#define ENOSYS 38 /* Function not implemented */
+#define ENOTEMPTY 39 /* Directory not empty */
+#define ELOOP 40 /* Too many symbolic links encountered */
+#define EWOULDBLOCK EAGAIN /* Operation would block */
+#define ENOMSG 42 /* No message of desired type */
+#define EIDRM 43 /* Identifier removed */
+#define ECHRNG 44 /* Channel number out of range */
+#define EL2NSYNC 45 /* Level 2 not synchronized */
+#define EL3HLT 46 /* Level 3 halted */
+#define EL3RST 47 /* Level 3 reset */
+#define ELNRNG 48 /* Link number out of range */
+#define EUNATCH 49 /* Protocol driver not attached */
+#define ENOCSI 50 /* No CSI structure available */
+#define EL2HLT 51 /* Level 2 halted */
+#define EBADE 52 /* Invalid exchange */
+#define EBADR 53 /* Invalid request descriptor */
+#define EXFULL 54 /* Exchange full */
+#define ENOANO 55 /* No anode */
+#define EBADRQC 56 /* Invalid request code */
+#define EBADSLT 57 /* Invalid slot */
+
+#define EDEADLOCK EDEADLK
+
+#define EBFONT 59 /* Bad font file format */
+#define ENOSTR 60 /* Device not a stream */
+#define ENODATA 61 /* No data available */
+#define ETIME 62 /* Timer expired */
+#define ENOSR 63 /* Out of streams resources */
+#define ENONET 64 /* Machine is not on the network */
+#define ENOPKG 65 /* Package not installed */
+#define EREMOTE 66 /* Object is remote */
+#define ENOLINK 67 /* Link has been severed */
+#define EADV 68 /* Advertise error */
+#define ESRMNT 69 /* Srmount error */
+#define ECOMM 70 /* Communication error on send */
+#define EPROTO 71 /* Protocol error */
+#define EMULTIHOP 72 /* Multihop attempted */
+#define EDOTDOT 73 /* RFS specific error */
+#define EBADMSG 74 /* Not a data message */
+#define EOVERFLOW 75 /* Value too large for defined data type */
+#define ENOTUNIQ 76 /* Name not unique on network */
+#define EBADFD 77 /* File descriptor in bad state */
+#define EREMCHG 78 /* Remote address changed */
+#define ELIBACC 79 /* Can not access a needed shared library */
+#define ELIBBAD 80 /* Accessing a corrupted shared library */
+#define ELIBSCN 81 /* .lib section in a.out corrupted */
+#define ELIBMAX 82 /* Attempting to link in too many shared libraries */
+#define ELIBEXEC 83 /* Cannot exec a shared library directly */
+#define EILSEQ 84 /* Illegal byte sequence */
+#define ERESTART 85 /* Interrupted system call should be restarted */
+#define ESTRPIPE 86 /* Streams pipe error */
+#define EUSERS 87 /* Too many users */
+#define ENOTSOCK 88 /* Socket operation on non-socket */
+#define EDESTADDRREQ 89 /* Destination address required */
+#define EMSGSIZE 90 /* Message too long */
+#define EPROTOTYPE 91 /* Protocol wrong type for socket */
+#define ENOPROTOOPT 92 /* Protocol not available */
+#define EPROTONOSUPPORT 93 /* Protocol not supported */
+#define ESOCKTNOSUPPORT 94 /* Socket type not supported */
+#define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */
+#define EPFNOSUPPORT 96 /* Protocol family not supported */
+#define EAFNOSUPPORT 97 /* Address family not supported by protocol */
+#define EADDRINUSE 98 /* Address already in use */
+#define EADDRNOTAVAIL 99 /* Cannot assign requested address */
+#define ENETDOWN 100 /* Network is down */
+#define ENETUNREACH 101 /* Network is unreachable */
+#define ENETRESET 102 /* Network dropped connection because of reset */
+#define ECONNABORTED 103 /* Software caused connection abort */
+#define ECONNRESET 104 /* Connection reset by peer */
+#define ENOBUFS 105 /* No buffer space available */
+#define EISCONN 106 /* Transport endpoint is already connected */
+#define ENOTCONN 107 /* Transport endpoint is not connected */
+#define ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */
+#define ETOOMANYREFS 109 /* Too many references: cannot splice */
+#define ETIMEDOUT 110 /* Connection timed out */
+#define ECONNREFUSED 111 /* Connection refused */
+#define EHOSTDOWN 112 /* Host is down */
+#define EHOSTUNREACH 113 /* No route to host */
+#define EALREADY 114 /* Operation already in progress */
+#define EINPROGRESS 115 /* Operation now in progress */
+#define ESTALE 116 /* Stale NFS file handle */
+#define EUCLEAN 117 /* Structure needs cleaning */
+#define ENOTNAM 118 /* Not a XENIX named type file */
+#define ENAVAIL 119 /* No XENIX semaphores available */
+#define EISNAM 120 /* Is a named type file */
+#define EREMOTEIO 121 /* Remote I/O error */
+#define EDQUOT 122 /* Quota exceeded */
+
+#define ENOMEDIUM 123 /* No medium found */
+#define EMEDIUMTYPE 124 /* Wrong medium type */
+#define ECANCELED 125 /* Operation Canceled */
+#define ENOKEY 126 /* Required key not available */
+#define EKEYEXPIRED 127 /* Key has expired */
+#define EKEYREVOKED 128 /* Key has been revoked */
+#define EKEYREJECTED 129 /* Key was rejected by service */
+
+/* for robust mutexes */
+#define EOWNERDEAD 130 /* Owner died */
+#define ENOTRECOVERABLE 131 /* State not recoverable */
+
+#endif
--- /dev/null
+/* main.h
+ * Header file for the Linux CAN-bus driver.
+ * Written by Arnaud Westenberg email:arnaud@wanadoo.nl
+ * Rewritten for new CAN queues by Pavel Pisa - OCERA team member
+ * email:pisa@cmp.felk.cvut.cz
+ * This software is released under the GPL-License.
+ * Version lincan-0.3 17 Jun 2004
+ */
+
+#include <malloc.h>
+
+#include "./can.h"
+#include "./constants.h"
+#include "./ul_listbase.h"
+#include "./can_sysless.h"
+#include "./can_queue.h"
+
+#ifdef CAN_DEBUG
+ #define DEBUGMSG(fmt,args...) can_printk(KERN_ERR "can.o (debug): " fmt,\
+ ##args)
+#else
+ #define DEBUGMSG(fmt,args...)
+#endif
+
+#define CANMSG(fmt,args...) can_printk(KERN_ERR "can.o: " fmt,##args)
+
+
+extern can_spinlock_t canuser_manipulation_lock;
+
+/**
+ * struct canhardware_t - structure representing pointers to all CAN boards
+ * @nr_boards: number of present boards
+ * @rtr_queue: RTR - remote transmission request queue (expect some changes there)
+ * @rtr_lock: locking for RTR queue
+ * @candevice: array of pointers to CAN devices/boards
+ */
+struct canhardware_t {
+ int nr_boards;
+ struct rtr_id *rtr_queue;
+ can_spinlock_t rtr_lock;
+ struct candevice_t *candevice[MAX_HW_CARDS];
+};
+
+/**
+ * struct candevice_t - CAN device/board structure
+ * @hwname: text string with board type
+ * @candev_idx: board index in canhardware_t.candevice[]
+ * @io_addr: IO/physical MEM address
+ * @res_addr: optional reset register port
+ * @dev_base_addr: CPU translated IO/virtual MEM address
+ * @flags: board flags: %PROGRAMMABLE_IRQ .. interrupt number
+ * can be programmed into board
+ * @nr_all_chips: number of chips present on the board
+ * @nr_82527_chips: number of Intel 8257 chips
+ * @nr_sja1000_chips: number of Philips SJA100 chips
+ * @chip: array of pointers to the chip structures
+ * @hwspecops: pointer to board specific operations
+ * @hosthardware_p: pointer to the root hardware structure
+ * @sysdevptr: union reserved for pointer to bus specific
+ * device structure (case @pcidev is used for PCI devices)
+ *
+ * The structure represent configuration and state of associated board.
+ * The driver infrastructure prepares this structure and calls
+ * board type specific board_register() function. The board support provided
+ * register function fills right function pointers in @hwspecops structure.
+ * Then driver setup calls functions init_hw_data(), init_chip_data(),
+ * init_chip_data(), init_obj_data() and program_irq(). Function init_hw_data()
+ * and init_chip_data() have to specify number and types of connected chips
+ * or objects respectively.
+ * The use of @nr_all_chips is preferred over use of fields @nr_82527_chips
+ * and @nr_sja1000_chips in the board non-specific functions.
+ * The @io_addr and @dev_base_addr is filled from module parameters
+ * to the same value. The request_io function can fix-up @dev_base_addr
+ * field if virtual address is different than bus address.
+ */
+struct candevice_t {
+ char *hwname; /* text board type */
+ int candev_idx; /* board index in canhardware_t.candevice[] */
+ unsigned long io_addr; /* IO/physical MEM address */
+ unsigned long res_addr; /* optional reset register port */
+ unsigned long dev_base_addr; /* CPU translated IO/virtual MEM address */
+ unsigned int flags;
+ int nr_all_chips;
+ int nr_82527_chips;
+ int nr_sja1000_chips;
+ can_spinlock_t device_lock;
+ struct canchip_t *chip[MAX_HW_CHIPS];
+
+ struct hwspecops_t *hwspecops;
+
+ struct canhardware_t *hosthardware_p;
+
+ union {
+ void *anydev;
+ #ifdef CAN_ENABLE_PCI_SUPPORT
+ struct pci_dev *pcidev;
+ #endif /*CAN_ENABLE_PCI_SUPPORT*/
+ } sysdevptr;
+
+};
+
+/**
+ * struct canchip_t - CAN chip state and type information
+ * @chip_type: text string describing chip type
+ * @chip_idx: index of the chip in candevice_t.chip[] array
+ * @chip_irq: chip interrupt number if any
+ * @chip_base_addr: chip base address in the CPU IO or virtual memory space
+ * @flags: chip flags: %CHIP_CONFIGURED .. chip is configured,
+ * %CHIP_SEGMENTED .. access to the chip is segmented (mainly for i82527 chips)
+ * @clock: chip base clock frequency in Hz
+ * @baudrate: selected chip baudrate in Hz
+ * @write_register: write chip register function copy
+ * @read_register: read chip register function copy
+ * @chip_data: pointer for optional chip specific data extension
+ * @sja_cdr_reg: SJA specific register -
+ * holds hardware specific options for the Clock Divider
+ * register. Options defined in the sja1000.h file:
+ * %CDR_CLKOUT_MASK, %CDR_CLK_OFF, %CDR_RXINPEN, %CDR_CBP, %CDR_PELICAN
+ * @sja_ocr_reg: SJA specific register -
+ * hold hardware specific options for the Output Control
+ * register. Options defined in the sja1000.h file:
+ * %OCR_MODE_BIPHASE, %OCR_MODE_TEST, %OCR_MODE_NORMAL, %OCR_MODE_CLOCK,
+ * %OCR_TX0_LH, %OCR_TX1_ZZ.
+ * @int_cpu_reg: Intel specific register -
+ * holds hardware specific options for the CPU Interface
+ * register. Options defined in the i82527.h file:
+ * %iCPU_CEN, %iCPU_MUX, %iCPU_SLP, %iCPU_PWD, %iCPU_DMC, %iCPU_DSC, %iCPU_RST.
+ * @int_clk_reg: Intel specific register -
+ * holds hardware specific options for the Clock Out
+ * register. Options defined in the i82527.h file:
+ * %iCLK_CD0, %iCLK_CD1, %iCLK_CD2, %iCLK_CD3, %iCLK_SL0, %iCLK_SL1.
+ * @int_bus_reg: Intel specific register -
+ * holds hardware specific options for the Bus Configuration
+ * register. Options defined in the i82527.h file:
+ * %iBUS_DR0, %iBUS_DR1, %iBUS_DT1, %iBUS_POL, %iBUS_CBY.
+ * @msgobj: array of pointers to individual communication objects
+ * @chipspecops: pointer to the set of chip specific object filled by init_chip_data() function
+ * @hostdevice: pointer to chip hosting board
+ * @max_objects: maximal number of communication objects connected to this chip
+ * @chip_lock: reserved for synchronization of the chip supporting routines
+ * (not used in the current driver version)
+ * @worker_thread: chip worker thread ID (RT-Linux specific field)
+ * @pend_flags: holds information about pending interrupt and tx_wake() operations
+ * (RT-Linux specific field). Masks values:
+ * %MSGOBJ_TX_REQUEST .. some of the message objects requires tx_wake() call,
+ * %MSGOBJ_IRQ_REQUEST .. chip interrupt processing required
+ * %MSGOBJ_WORKER_WAKE .. marks, that worker thread should be waked
+ * for some of above reasons
+ *
+ * The fields @write_register and @read_register are copied from
+ * corresponding fields from @hwspecops structure
+ * (chip->hostdevice->hwspecops->write_register and
+ * chip->hostdevice->hwspecops->read_register)
+ * to speedup can_write_reg() and can_read_reg() functions.
+ */
+struct canchip_t {
+ char *chip_type;
+ int chip_idx; /* chip index in candevice_t.chip[] */
+ int chip_irq;
+ unsigned long chip_base_addr;
+ unsigned int flags;
+ long clock; /* Chip clock in Hz */
+ long baudrate;
+
+ void (*write_register)(unsigned data,unsigned long address);
+ unsigned (*read_register)(unsigned long address);
+
+ void *chip_data;
+
+ unsigned short sja_cdr_reg; /* sja1000 only! */
+ unsigned short sja_ocr_reg; /* sja1000 only! */
+ unsigned short int_cpu_reg; /* intel 82527 only! */
+ unsigned short int_clk_reg; /* intel 82527 only! */
+ unsigned short int_bus_reg; /* intel 82527 only! */
+
+ struct msgobj_t *msgobj[MAX_MSGOBJS];
+
+ struct chipspecops_t *chipspecops;
+
+ struct candevice_t *hostdevice;
+
+ int max_objects; /* 1 for sja1000, 15 for i82527 */
+
+ can_spinlock_t chip_lock;
+
+ #ifdef CAN_WITH_RTL
+ pthread_t worker_thread;
+ unsigned long pend_flags;
+ #endif /*CAN_WITH_RTL*/
+};
+
+/**
+ * struct msgobj_t - structure holding communication object state
+ * @obj_base_addr:
+ * @minor: associated device minor number
+ * @object: object number in canchip_t structure +1
+ * @flags: message object flags
+ * @ret: field holding status of the last Tx operation
+ * @qends: pointer to message object corresponding ends structure
+ * @tx_qedge: edge corresponding to transmitted message
+ * @tx_slot: slot holding transmitted message, slot is taken from
+ * canque_test_outslot() call and is freed by canque_free_outslot()
+ * or rescheduled canque_again_outslot()
+ * @tx_retry_cnt: transmission attempt counter
+ * @tx_timeout: can be used by chip driver to check for the transmission timeout
+ * @rx_msg: temporary storage to hold received messages before
+ * calling to canque_filter_msg2edges()
+ * @hostchip: pointer to the &canchip_t structure this object belongs to
+ * @obj_used: counter of users (associated file structures for Linux
+ * userspace clients) of this object
+ * @obj_users: list of user structures of type &canuser_t.
+ * @obj_flags: message object specific flags. Masks values:
+ * %MSGOBJ_TX_REQUEST .. the message object requests TX activation
+ * %MSGOBJ_TX_LOCK .. some IRQ routine or callback on some CPU
+ * is running inside TX activation processing code
+ * @rx_preconfig_id: place to store RX message identifier for some chip types
+ * that reuse same object for TX
+ */
+struct msgobj_t {
+ unsigned long obj_base_addr;
+ unsigned int minor; /* associated device minor number */
+ unsigned int object; /* object number in canchip_t +1 for debug printk */
+ unsigned long obj_flags;
+ int ret;
+
+ struct canque_ends_t *qends;
+
+ struct canque_edge_t *tx_qedge;
+ struct canque_slot_t *tx_slot;
+ int tx_retry_cnt;
+ struct timer_list tx_timeout;
+
+ struct canmsg_t rx_msg;
+
+ struct canchip_t *hostchip;
+
+ unsigned long rx_preconfig_id;
+
+ atomic_t obj_used;
+ struct list_head obj_users;
+};
+
+#define CAN_USER_MAGIC 0x05402033
+
+/**
+ * struct canuser_t - structure holding CAN user/client state
+ * @flags: used to distinguish Linux/RT-Linux type
+ * @peers: for connection into list of object users
+ * @qends: pointer to the ends structure corresponding for this user
+ * @msgobj: communication object the user is connected to
+ * @rx_edge0: default receive queue for filter IOCTL
+ * @userinfo: stores user context specific information.
+ * The field @fileinfo.file holds pointer to open device file state structure
+ * for the Linux user-space client applications
+ * @magic: magic number to check consistency when pointer is retrieved
+ * from file private field
+ */
+struct canuser_t {
+ unsigned long flags;
+ struct list_head peers;
+ struct canque_ends_t *qends;
+ struct msgobj_t *msgobj;
+ struct canque_edge_t *rx_edge0; /* simplifies IOCTL */
+ union {
+ struct {
+ struct file *file; /* back ptr to file */
+ } fileinfo;
+ #ifdef CAN_WITH_RTL
+ struct {
+ struct rtl_file *file;
+ } rtlinfo;
+ #endif /*CAN_WITH_RTL*/
+ } userinfo;
+ int magic;
+};
+
+/**
+ * struct hwspecops_t - hardware/board specific operations
+ * @request_io: reserve io or memory range for can board
+ * @release_io: free reserved io memory range
+ * @reset: hardware reset routine
+ * @init_hw_data: called to initialize &candevice_t structure, mainly
+ * @res_add, @nr_all_chips, @nr_82527_chips, @nr_sja1000_chips
+ * and @flags fields
+ * @init_chip_data: called initialize each &canchip_t structure, mainly
+ * @chip_type, @chip_base_addr, @clock and chip specific registers.
+ * It is responsible to setup &canchip_t->@chipspecops functions
+ * for non-standard chip types (type other than "i82527", "sja1000" or "sja1000p")
+ * @init_obj_data: called initialize each &msgobj_t structure,
+ * mainly @obj_base_addr field.
+ * @program_irq: program interrupt generation hardware of the board
+ * if flag %PROGRAMMABLE_IRQ is present for specified device/board
+ * @write_register: low level write register routine
+ * @read_register: low level read register routine
+ */
+struct hwspecops_t {
+ int (*request_io)(struct candevice_t *candev);
+ int (*release_io)(struct candevice_t *candev);
+ int (*reset)(struct candevice_t *candev);
+ int (*init_hw_data)(struct candevice_t *candev);
+ int (*init_chip_data)(struct candevice_t *candev, int chipnr);
+ int (*init_obj_data)(struct canchip_t *chip, int objnr);
+ int (*program_irq)(struct candevice_t *candev);
+ void (*write_register)(unsigned data,unsigned long address);
+ unsigned (*read_register)(unsigned long address);
+};
+
+/**
+ * struct chipspecops_t - can controller chip specific operations
+ * @chip_config: CAN chip configuration
+ * @baud_rate: set communication parameters
+ * @standard_mask: setup of mask for message filtering
+ * @extended_mask: setup of extended mask for message filtering
+ * @message15_mask: set mask of i82527 message object 15
+ * @clear_objects: clears state of all message object residing in chip
+ * @config_irqs: tunes chip hardware interrupt delivery
+ * @pre_read_config: prepares message object for message reception
+ * @pre_write_config: prepares message object for message transmission
+ * @send_msg: initiate message transmission
+ * @remote_request: configures message object and asks for RTR message
+ * @check_tx_stat: checks state of transmission engine
+ * @wakeup_tx: wakeup TX processing
+ * @filtch_rq: optional routine for propagation of outgoing edges filters to HW
+ * @enable_configuration: enable chip configuration mode
+ * @disable_configuration: disable chip configuration mode
+ * @set_btregs: configures bitrate registers
+ * @attach_to_chip: attaches to the chip, setups registers and possibly state informations
+ * @release_chip: called before chip structure removal if %CHIP_ATTACHED is set
+ * @start_chip: starts chip message processing
+ * @stop_chip: stops chip message processing
+ * @irq_handler: interrupt service routine
+ * @irq_accept: optional fast irq accept routine responsible for blocking further interrupts
+ */
+struct chipspecops_t {
+ int (*chip_config)(struct canchip_t *chip);
+ int (*baud_rate)(struct canchip_t *chip, int rate, int clock, int sjw,
+ int sampl_pt, int flags);
+ int (*standard_mask)(struct canchip_t *chip, unsigned short code,
+ unsigned short mask);
+ int (*extended_mask)(struct canchip_t *chip, unsigned long code,
+ unsigned long mask);
+ int (*message15_mask)(struct canchip_t *chip, unsigned long code,
+ unsigned long mask);
+ int (*clear_objects)(struct canchip_t *chip);
+ int (*config_irqs)(struct canchip_t *chip, short irqs);
+ int (*pre_read_config)(struct canchip_t *chip, struct msgobj_t *obj);
+ int (*pre_write_config)(struct canchip_t *chip, struct msgobj_t *obj,
+ struct canmsg_t *msg);
+ int (*send_msg)(struct canchip_t *chip, struct msgobj_t *obj,
+ struct canmsg_t *msg);
+ int (*remote_request)(struct canchip_t *chip, struct msgobj_t *obj);
+ int (*check_tx_stat)(struct canchip_t *chip);
+ int (*wakeup_tx)(struct canchip_t *chip, struct msgobj_t *obj);
+ int (*filtch_rq)(struct canchip_t *chip, struct msgobj_t *obj);
+ int (*enable_configuration)(struct canchip_t *chip);
+ int (*disable_configuration)(struct canchip_t *chip);
+ int (*set_btregs)(struct canchip_t *chip, unsigned short btr0,
+ unsigned short btr1);
+ int (*attach_to_chip)(struct canchip_t *chip);
+ int (*release_chip)(struct canchip_t *chip);
+ int (*start_chip)(struct canchip_t *chip);
+ int (*stop_chip)(struct canchip_t *chip);
+ int (*irq_handler)(int irq, struct canchip_t *chip);
+ int (*irq_accept)(int irq, struct canchip_t *chip);
+};
+
+struct mem_addr {
+ void *address;
+ struct mem_addr *next;
+ size_t size;
+};
+
+/* Structure for the RTR queue */
+struct rtr_id {
+ unsigned long id;
+ struct canmsg_t *rtr_message;
+ wait_queue_head_t rtr_wq;
+ struct rtr_id *next;
+};
+
+extern int major;
+extern int minor[MAX_TOT_CHIPS];
+extern int extended;
+extern int baudrate[MAX_TOT_CHIPS];
+extern char *hw[MAX_HW_CARDS];
+extern int irq[MAX_IRQ];
+extern unsigned long io[MAX_HW_CARDS];
+extern int processlocal;
+
+extern struct canhardware_t *hardware_p;
+extern struct canchip_t *chips_p[MAX_TOT_CHIPS];
+extern struct msgobj_t *objects_p[MAX_TOT_MSGOBJS];
+
+extern struct mem_addr *mem_head;
+
+
+#if defined(CONFIG_OC_LINCAN_PORTIO_ONLY)
+extern inline void can_write_reg(const struct canchip_t *chip, unsigned char data, unsigned address)
+{
+ outb(data, chip->chip_base_addr+address);
+}
+extern inline unsigned can_read_reg(const struct canchip_t *chip, unsigned address)
+{
+ return inb(chip->chip_base_addr+address);
+}
+extern inline void canobj_write_reg(const struct canchip_t *chip, const struct msgobj_t *obj,
+ unsigned char data, unsigned address)
+{
+ outb(data, obj->obj_base_addr+address);
+}
+extern inline unsigned canobj_read_reg(const struct canchip_t *chip, const struct msgobj_t *obj,
+ unsigned address)
+{
+ return inb(obj->obj_base_addr+address);
+}
+
+#elif defined(CONFIG_OC_LINCAN_MEMIO_ONLY)
+extern inline void can_write_reg(const struct canchip_t *chip, unsigned char data, unsigned address)
+{
+ writeb(data, chip->chip_base_addr+address);
+}
+extern inline unsigned can_read_reg(const struct canchip_t *chip, unsigned address)
+{
+ return readb(chip->chip_base_addr+address);
+}
+extern inline void canobj_write_reg(const struct canchip_t *chip, const struct msgobj_t *obj,
+ unsigned char data, unsigned address)
+{
+ writeb(data, obj->obj_base_addr+address);
+}
+extern inline unsigned canobj_read_reg(const struct canchip_t *chip, const struct msgobj_t *obj,
+ unsigned address)
+{
+ return readb(obj->obj_base_addr+address);
+}
+
+#else /*CONFIG_OC_LINCAN_DYNAMICIO*/
+#ifndef CONFIG_OC_LINCAN_DYNAMICIO
+#define CONFIG_OC_LINCAN_DYNAMICIO
+#endif
+
+/* Inline function to write to the hardware registers. The argument address is
+ * relative to the memory map of the chip and not the absolute memory address.
+ */
+extern inline void can_write_reg(const struct canchip_t *chip, unsigned char data, unsigned address)
+{
+ unsigned long address_to_write;
+ address_to_write = chip->chip_base_addr+address;
+ chip->write_register(data, address_to_write);
+}
+
+extern inline unsigned can_read_reg(const struct canchip_t *chip, unsigned address)
+{
+ unsigned long address_to_read;
+ address_to_read = chip->chip_base_addr+address;
+ return chip->read_register(address_to_read);
+}
+
+extern inline void canobj_write_reg(const struct canchip_t *chip, const struct msgobj_t *obj,
+ unsigned char data, unsigned address)
+{
+ unsigned long address_to_write;
+ address_to_write = obj->obj_base_addr+address;
+ chip->write_register(data, address_to_write);
+}
+
+extern inline unsigned canobj_read_reg(const struct canchip_t *chip, const struct msgobj_t *obj,
+ unsigned address)
+{
+ unsigned long address_to_read;
+ address_to_read = obj->obj_base_addr+address;
+ return chip->read_register(address_to_read);
+}
+
+#endif /*CONFIG_OC_LINCAN_DYNAMICIO*/
+
+int can_base_addr_fixup(struct candevice_t *candev, unsigned long new_base);
+int can_request_io_region(unsigned long start, unsigned long n, const char *name);
+void can_release_io_region(unsigned long start, unsigned long n);
+int can_request_mem_region(unsigned long start, unsigned long n, const char *name);
+void can_release_mem_region(unsigned long start, unsigned long n);
+
+struct boardtype_t {
+ const char *boardtype;
+ int (*board_register)(struct hwspecops_t *hwspecops);
+ int irqnum;
+};
+
+const struct boardtype_t* boardtype_find(const char *str);
+
+int can_check_dev_taken(void *anydev);
+
+#if defined(can_gettimeofday) && defined(CAN_MSG_VERSION_2) && 1
+static inline
+void can_filltimestamp(canmsg_tstamp_t *ptimestamp)
+{
+ can_gettimeofday(ptimestamp);
+}
+#else /* No timestamp support, set field to zero */
+static inline
+void can_filltimestamp(canmsg_tstamp_t *ptimestamp)
+{
+ #ifdef CAN_MSG_VERSION_2
+ ptimestamp->tv_sec = 0;
+ ptimestamp->tv_usec = 0;
+ #else /* CAN_MSG_VERSION_2 */
+ *ptimestamp = 0;
+ #endif /* CAN_MSG_VERSION_2 */
+
+}
+#endif /* End of timestamp source selection */
+
+#ifdef CAN_WITH_RTL
+extern int can_rtl_priority;
+#endif /*CAN_WITH_RTL*/
--- /dev/null
+/* sja1000p.h
+ * Header file for the Linux CAN-bus driver.
+ * Written by Arnaud Westenberg email:arnaud@wanadoo.nl
+ * Added by T.Motylewski@bfad.de
+ * See app. note an97076.pdf from Philips Semiconductors
+ * and SJA1000 data sheet
+ * PELICAN mode
+ * This software is released under the GPL-License.
+ * Version lincan-0.3 17 Jun 2004
+ */
+
+int sja1000p_chip_config(struct canchip_t *chip);
+int sja1000p_extended_mask(struct canchip_t *chip, unsigned long code, unsigned long mask);
+int sja1000p_baud_rate(struct canchip_t *chip, int rate, int clock, int sjw,
+ int sampl_pt, int flags);
+int sja1000p_pre_read_config(struct canchip_t *chip, struct msgobj_t *obj);
+int sja1000p_pre_write_config(struct canchip_t *chip, struct msgobj_t *obj,
+ struct canmsg_t *msg);
+int sja1000p_send_msg(struct canchip_t *chip, struct msgobj_t *obj,
+ struct canmsg_t *msg);
+int sja1000p_fill_chipspecops(struct canchip_t *chip);
+int sja1000p_irq_handler(int irq, struct canchip_t *chip);
+
+
+/* PeliCAN mode */
+enum SJA1000_PeliCAN_regs {
+ SJAMOD = 0x00,
+/// Command register
+ SJACMR = 0x01,
+/// Status register
+ SJASR = 0x02,
+/// Interrupt register
+ SJAIR = 0x03,
+/// Interrupt Enable
+ SJAIER = 0x04,
+/// Bus Timing register 0
+ SJABTR0 = 0x06,
+/// Bus Timing register 1
+ SJABTR1 = 0x07,
+/// Output Control register
+ SJAOCR = 0x08,
+/// Arbitration Lost Capture
+ SJAALC = 0x0b,
+/// Error Code Capture
+ SJAECC = 0x0c,
+/// Error Warning Limit
+ SJAEWLR = 0x0d,
+/// RX Error Counter
+ SJARXERR = 0x0e,
+/// TX Error Counter
+ SJATXERR0 = 0x0e,
+ SJATXERR1 = 0x0f,
+/// Rx Message Counter (number of msgs. in RX FIFO
+ SJARMC = 0x1d,
+/// Rx Buffer Start Addr. (address of current MSG)
+ SJARBSA = 0x1e,
+/// Transmit Buffer (write) Receive Buffer (read) Frame Information
+ SJAFRM = 0x10,
+/// ID bytes (11 bits in 0 and 1 or 16 bits in 0,1 and 13 bits in 2,3 (extended))
+ SJAID0 = 0x11, SJAID1 = 0x12,
+/// ID cont. for extended frames
+ SJAID2 = 0x13, SJAID3 = 0x14,
+/// Data start standard frame
+ SJADATS = 0x13,
+/// Data start extended frame
+ SJADATE = 0x15,
+/// Acceptance Code (4 bytes) in RESET mode
+ SJAACR0 = 0x10,
+/// Acceptance Mask (4 bytes) in RESET mode
+ SJAAMR0 = 0x14,
+/// 4 bytes
+ SJA_PeliCAN_AC_LEN = 4,
+/// Clock Divider
+ SJACDR = 0x1f
+};
+
+/** Mode Register 0x00 */
+enum sja1000_PeliCAN_MOD {
+ sjaMOD_SM = 1<<4, // Sleep Mode (writable only in OPERATING mode)
+ sjaMOD_AFM= 1<<3, // Acceptance Filter Mode (writable only in RESET)
+ sjaMOD_STM= 1<<2, // Self Test Mode (writable only in RESET)
+ sjaMOD_LOM= 1<<1, // Listen Only Mode (writable only in RESET)
+ sjaMOD_RM = 1 // Reset Mode
+};
+
+/** Command Register 0x01 */
+enum sja1000_PeliCAN_CMR {
+ sjaCMR_SRR= 1<<4, // Self Reception Request (GoToSleep in BASIC mode)
+ sjaCMR_CDO= 1<<3, // Clear Data Overrun
+ sjaCMR_RRB= 1<<2, // Release Receive Buffer
+ sjaCMR_AT = 1<<1, // Abort Transmission
+ sjaCMR_TR = 1 }; // Transmission Request
+
+/** Status Register 0x02 */
+enum sja1000_SR {
+ sjaSR_BS = 1<<7, // Bus Status
+ sjaSR_ES = 1<<6, // Error Status
+ sjaSR_TS = 1<<5, // Transmit Status
+ sjaSR_RS = 1<<4, // Receive Status
+ sjaSR_TCS = 1<<3, // Transmission Complete Status
+ sjaSR_TBS = 1<<2, // Transmit Buffer Status
+ sjaSR_DOS = 1<<1, // Data Overrun Status
+ sjaSR_RBS = 1 }; // Receive Buffer Status
+
+/** Interrupt Enable Register 0x04 */
+enum sja1000_PeliCAN_IER {
+ sjaIER_BEIE= 1<<7, // Bus Error Interrupt Enable
+ sjaIER_ALIE= 1<<6, // Arbitration Lost Interrupt Enable
+ sjaIER_EPIE= 1<<5, // Error Passive Interrupt Enable
+ sjaIER_WUIE= 1<<4, // Wake-Up Interrupt Enable
+ sjaIER_DOIE= 1<<3, // Data Overrun Interrupt Enable
+ sjaIER_EIE = 1<<2, // Error Warning Interrupt Enable
+ sjaIER_TIE = 1<<1, // Transmit Interrupt Enable
+ sjaIER_RIE = 1, // Receive Interrupt Enable
+ sjaENABLE_INTERRUPTS = sjaIER_BEIE|sjaIER_EPIE|sjaIER_DOIE|sjaIER_EIE|sjaIER_TIE|sjaIER_RIE,
+ sjaDISABLE_INTERRUPTS = 0
+// WARNING: the chip automatically enters RESET (bus off) mode when
+ // error counter > 255
+};
+
+/** Arbitration Lost Capture Register 0x0b.
+ * Counting starts from 0 (bit1 of ID). Bits 5-7 reserved*/
+enum sja1000_PeliCAN_ALC {
+ sjaALC_SRTR = 0x0b,// Arbitration lost in bit SRTR
+ sjaALC_IDE = 0x1c, // Arbitration lost in bit IDE
+ sjaALC_RTR = 0x1f, // Arbitration lost in RTR
+};
+
+/** Error Code Capture Register 0x0c*/
+enum sja1000_PeliCAN_ECC {
+ sjaECC_ERCC1 = 1<<7,
+ sjaECC_ERCC0 = 1<<6,
+ sjaECC_BIT = 0,
+ sjaECC_FORM = sjaECC_ERCC0,
+ sjaECC_STUFF = sjaECC_ERCC1,
+ sjaECC_OTHER = sjaECC_ERCC0 | sjaECC_ERCC1,
+ sjaECC_DIR = 1<<5, // 1 == RX, 0 == TX
+ sjaECC_SEG_M = (1<<5) -1 // Segment mask, see page 37 of SJA1000 Data Sheet
+};
+
+/** Frame format information 0x10 */
+enum sja1000_PeliCAN_FRM {
+ sjaFRM_FF = 1<<7, // Frame Format 1 == extended, 0 == standard
+ sjaFRM_RTR = 1<<6, // Remote request
+ sjaFRM_DLC_M = (1<<4)-1 // Length Mask
+};
+
+
+/** Interrupt (status) Register 0x03 */
+enum sja1000_PeliCAN_IR {
+ sjaIR_BEI = 1<<7, // Bus Error Interrupt
+ sjaIR_ALI = 1<<6, // Arbitration Lost Interrupt
+ sjaIR_EPI = 1<<5, // Error Passive Interrupt (entered error passive state or error active state)
+ sjaIR_WUI = 1<<4, // Wake-Up Interrupt
+ sjaIR_DOI = 1<<3, // Data Overrun Interrupt
+ sjaIR_EI = 1<<2, // Error Interrupt
+ sjaIR_TI = 1<<1, // Transmit Interrupt
+ sjaIR_RI = 1 // Receive Interrupt
+};
+
+/** Bus Timing 1 Register 0x07 */
+enum sja1000_BTR1 {
+ sjaMAX_TSEG1 = 15,
+ sjaMAX_TSEG2 = 7
+};
+
+/** Output Control Register 0x08 */
+enum sja1000_OCR {
+ sjaOCR_MODE_BIPHASE = 0,
+ sjaOCR_MODE_TEST = 1,
+ sjaOCR_MODE_NORMAL = 2,
+ sjaOCR_MODE_CLOCK = 3,
+/// TX0 push-pull not inverted
+ sjaOCR_TX0_LH = 0x18,
+/// TX1 floating (off)
+ sjaOCR_TX1_ZZ = 0
+};
+
+/** Clock Divider register 0x1f */
+enum sja1000_CDR {
+ sjaCDR_PELICAN = 1<<7,
+/// bypass input comparator
+ sjaCDR_CBP = 1<<6,
+/// switch TX1 to generate RX INT
+ sjaCDR_RXINPEN = 1<<5,
+ sjaCDR_CLK_OFF = 1<<3,
+/// f_out = f_osc/(2*(CDR[2:0]+1)) or f_osc if CDR[2:0]==7
+ sjaCDR_CLKOUT_DIV1 = 7,
+ sjaCDR_CLKOUT_DIV2 = 0,
+ sjaCDR_CLKOUT_DIV4 = 1,
+ sjaCDR_CLKOUT_DIV6 = 2,
+ sjaCDR_CLKOUT_DIV8 = 3,
+ sjaCDR_CLKOUT_DIV10 = 4,
+ sjaCDR_CLKOUT_DIV12 = 5,
+ sjaCDR_CLKOUT_DIV14 = 6,
+ sjaCDR_CLKOUT_MASK = 7
+};
+
+/** flags for sja1000_baud_rate */
+#define BTR1_SAM (1<<1)
--- /dev/null
+#ifndef _UL_LISTBASE_H
+#define _UL_LISTBASE_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifndef __KERNEL__
+
+#define LIST_POISON1 ((void *) 0)
+#define LIST_POISON2 ((void *) 0)
+
+/*
+ * Simple doubly linked list implementation.
+ *
+ * Some of the internal functions ("__xxx") are useful when
+ * manipulating whole lists rather than single entries, as
+ * sometimes we already know the next/prev entries and we can
+ * generate better code by using them directly rather than
+ * using the generic single-entry routines.
+ */
+
+struct list_head {
+ struct list_head *next, *prev;
+};
+
+#define LIST_HEAD_INIT(name) { &(name), &(name) }
+
+#define LIST_HEAD(name) \
+ struct list_head name = LIST_HEAD_INIT(name)
+
+#define INIT_LIST_HEAD(ptr) do { \
+ (ptr)->next = (ptr); (ptr)->prev = (ptr); \
+} while (0)
+
+/*
+ * Insert a new entry between two known consecutive entries.
+ *
+ * This is only for internal list manipulation where we know
+ * the prev/next entries already!
+ */
+static inline void __list_add(struct list_head *new,
+ struct list_head *prev,
+ struct list_head *next)
+{
+ next->prev = new;
+ new->next = next;
+ new->prev = prev;
+ prev->next = new;
+}
+
+/**
+ * list_add - add a new entry
+ * @new: new entry to be added
+ * @head: list head to add it after
+ *
+ * Insert a new entry after the specified head.
+ * This is good for implementing stacks.
+ */
+static inline void list_add(struct list_head *new, struct list_head *head)
+{
+ __list_add(new, head, head->next);
+}
+
+/**
+ * list_add_tail - add a new entry
+ * @new: new entry to be added
+ * @head: list head to add it before
+ *
+ * Insert a new entry before the specified head.
+ * This is useful for implementing queues.
+ */
+static inline void list_add_tail(struct list_head *new, struct list_head *head)
+{
+ __list_add(new, head->prev, head);
+}
+
+/*
+ * Delete a list entry by making the prev/next entries
+ * point to each other.
+ *
+ * This is only for internal list manipulation where we know
+ * the prev/next entries already!
+ */
+static inline void __list_del(struct list_head * prev, struct list_head * next)
+{
+ next->prev = prev;
+ prev->next = next;
+}
+
+/**
+ * list_del - deletes entry from list.
+ * @entry: the element to delete from the list.
+ * Note: list_empty on entry does not return true after this, the entry is
+ * in an undefined state.
+ */
+static inline void list_del(struct list_head *entry)
+{
+ __list_del(entry->prev, entry->next);
+ entry->next = LIST_POISON1;
+ entry->prev = LIST_POISON2;
+}
+
+/**
+ * list_del_init - deletes entry from list and reinitialize it.
+ * @entry: the element to delete from the list.
+ */
+static inline void list_del_init(struct list_head *entry)
+{
+ __list_del(entry->prev, entry->next);
+ INIT_LIST_HEAD(entry);
+}
+
+/**
+ * list_move - delete from one list and add as another's head
+ * @list: the entry to move
+ * @head: the head that will precede our entry
+ */
+static inline void list_move(struct list_head *list, struct list_head *head)
+{
+ __list_del(list->prev, list->next);
+ list_add(list, head);
+}
+
+/**
+ * list_move_tail - delete from one list and add as another's tail
+ * @list: the entry to move
+ * @head: the head that will follow our entry
+ */
+static inline void list_move_tail(struct list_head *list,
+ struct list_head *head)
+{
+ __list_del(list->prev, list->next);
+ list_add_tail(list, head);
+}
+
+/**
+ * list_empty - tests whether a list is empty
+ * @head: the list to test.
+ */
+static inline int list_empty(struct list_head *head)
+{
+ return head->next == head;
+}
+
+static inline void __list_splice(struct list_head *list,
+ struct list_head *head)
+{
+ struct list_head *first = list->next;
+ struct list_head *last = list->prev;
+ struct list_head *where = head->next;
+
+ first->prev = head;
+ head->next = first;
+
+ last->next = where;
+ where->prev = last;
+}
+
+/**
+ * list_splice - join two lists
+ * @list: the new list to add.
+ * @head: the place to add it in the first list.
+ */
+static inline void list_splice(struct list_head *list, struct list_head *head)
+{
+ if (!list_empty(list))
+ __list_splice(list, head);
+}
+
+/**
+ * list_splice_init - join two lists and reinitialise the emptied list.
+ * @list: the new list to add.
+ * @head: the place to add it in the first list.
+ *
+ * The list at @list is reinitialised
+ */
+static inline void list_splice_init(struct list_head *list,
+ struct list_head *head)
+{
+ if (!list_empty(list)) {
+ __list_splice(list, head);
+ INIT_LIST_HEAD(list);
+ }
+}
+
+/**
+ * list_entry - get the struct for this entry
+ * @ptr: the &struct list_head pointer.
+ * @type: the type of the struct this is embedded in.
+ * @member: the name of the list_struct within the struct.
+ */
+#define list_entry(ptr, type, member) \
+ container_of(ptr, type, member)
+
+/**
+ * list_for_each - iterate over a list
+ * @pos: the &struct list_head to use as a loop counter.
+ * @head: the head for your list.
+ */
+#define list_for_each(pos, head) \
+ for (pos = (head)->next, prefetch(pos->next); pos != (head); \
+ pos = pos->next, prefetch(pos->next))
+
+/**
+ * __list_for_each - iterate over a list
+ * @pos: the &struct list_head to use as a loop counter.
+ * @head: the head for your list.
+ *
+ * This variant differs from list_for_each() in that it's the
+ * simplest possible list iteration code, no prefetching is done.
+ * Use this for code that knows the list to be very short (empty
+ * or 1 entry) most of the time.
+ */
+#define __list_for_each(pos, head) \
+ for (pos = (head)->next; pos != (head); pos = pos->next)
+
+/**
+ * list_for_each_prev - iterate over a list backwards
+ * @pos: the &struct list_head to use as a loop counter.
+ * @head: the head for your list.
+ */
+#define list_for_each_prev(pos, head) \
+ for (pos = (head)->prev, prefetch(pos->prev); pos != (head); \
+ pos = pos->prev, prefetch(pos->prev))
+
+/**
+ * list_for_each_safe - iterate over a list safe against removal of list entry
+ * @pos: the &struct list_head to use as a loop counter.
+ * @n: another &struct list_head to use as temporary storage
+ * @head: the head for your list.
+ */
+#define list_for_each_safe(pos, n, head) \
+ for (pos = (head)->next, n = pos->next; pos != (head); \
+ pos = n, n = pos->next)
+
+/**
+ * list_for_each_entry - iterate over list of given type
+ * @pos: the type * to use as a loop counter.
+ * @head: the head for your list.
+ * @member: the name of the list_struct within the struct.
+ */
+#define list_for_each_entry(pos, head, member) \
+ for (pos = list_entry((head)->next, typeof(*pos), member), \
+ prefetch(pos->member.next); \
+ &pos->member != (head); \
+ pos = list_entry(pos->member.next, typeof(*pos), member), \
+ prefetch(pos->member.next))
+
+/**
+ * list_for_each_entry_reverse - iterate backwards over list of given type.
+ * @pos: the type * to use as a loop counter.
+ * @head: the head for your list.
+ * @member: the name of the list_struct within the struct.
+ */
+#define list_for_each_entry_reverse(pos, head, member) \
+ for (pos = list_entry((head)->prev, typeof(*pos), member), \
+ prefetch(pos->member.prev); \
+ &pos->member != (head); \
+ pos = list_entry(pos->member.prev, typeof(*pos), member), \
+ prefetch(pos->member.prev))
+
+
+/**
+ * list_for_each_entry_safe - iterate over list of given type safe against removal of list entry
+ * @pos: the type * to use as a loop counter.
+ * @n: another type * to use as temporary storage
+ * @head: the head for your list.
+ * @member: the name of the list_struct within the struct.
+ */
+#define list_for_each_entry_safe(pos, n, head, member) \
+ for (pos = list_entry((head)->next, typeof(*pos), member), \
+ n = list_entry(pos->member.next, typeof(*pos), member); \
+ &pos->member != (head); \
+ pos = n, n = list_entry(n->member.next, typeof(*n), member))
+
+#else /*__KERNEL__*/
+
+#include <linux/list.h>
+
+#endif /*__KERNEL__*/
+
+#ifdef __cplusplus
+} /* extern "C"*/
+#endif
+
+#endif /* _UL_LISTBASE_H */
--- /dev/null
+/* can_quekern.c - CAN message queues functions for the Linux kernel
+ * Linux CAN-bus device driver.
+ * New CAN queues by Pavel Pisa - OCERA team member
+ * email:pisa@cmp.felk.cvut.cz
+ * This software is released under the GPL-License.
+ * Version lincan-0.3 17 Jun 2004
+ */
+
+#include "../include/can.h"
+#include "../include/can_sysdep.h"
+#include "../include/can_queue.h"
+
+//#define CAN_DEBUG
+
+extern atomic_t edge_num_cnt;
+
+#ifdef CAN_DEBUG
+ #define DEBUGQUE(fmt,args...) can_printk(KERN_ERR "can_quekern (debug): " fmt,\
+ ##args)
+
+#else
+ #define DEBUGQUE(fmt,args...)
+#endif
+
+#define ERRMSGQUE(fmt,args...) can_printk(KERN_ERR "can_quekern: " fmt,\
+ ##args)
+
+
+/*
+ * Modifies Tx message processing
+ * 0 .. local message processing disabled
+ * 1 .. local messages disabled by default but can be enabled by canque_set_filt
+ * 2 .. local messages enabled by default, can be disabled by canque_set_filt
+ */
+extern int processlocal;
+
+void canque_dead_func(unsigned long data);
+
+/* Support for dead ends structures left after client close */
+can_spinlock_t canque_dead_func_lock;
+LIST_HEAD(canque_dead_ends);
+/* retrieved by list_entry(canque_dead_ends.next,struct canque_ends_t,dead_peers) */
+LIST_HEAD(canque_dead_edges);
+/* retrieved by list_entry(canque_dead_edges.next,struct canque_edge_t,inpeers) */
+DECLARE_TASKLET(canque_dead_tl, canque_dead_func, 0);
+/* activated by tasklet_schedule(&canque_dead_tl) */
+
+
+static inline
+struct canque_edge_t *canque_dead_edges_cut_first(void)
+{
+ can_spin_irqflags_t flags;
+ struct canque_edge_t *edge;
+ can_spin_lock_irqsave(&canque_dead_func_lock, flags);
+ if(list_empty(&canque_dead_edges))
+ edge=NULL;
+ else{
+ edge=list_entry(canque_dead_edges.next,struct canque_edge_t,inpeers);
+ list_del(&edge->inpeers);
+ }
+ can_spin_unlock_irqrestore(&canque_dead_func_lock, flags);
+ return edge;
+}
+
+void canque_dead_func(unsigned long data)
+{
+ can_spin_irqflags_t flags;
+ struct canque_edge_t *qedge;
+ struct canque_ends_t *qends;
+ struct list_head *entry;
+
+ while((qedge=canque_dead_edges_cut_first())){
+ DEBUGQUE("edge %d disposed\n",qedge->edge_num);
+ #ifdef CAN_WITH_RTL
+ if(canque_fifo_test_fl(&qedge->fifo,RTL_MEM)){
+ canque_dispose_edge_rtl(qedge);
+ continue;
+ }
+ #endif /*CAN_WITH_RTL*/
+ canque_fifo_done_kern(&qedge->fifo);
+ kfree(qedge);
+ }
+
+ can_spin_lock_irqsave(&canque_dead_func_lock, flags);
+ entry=canque_dead_ends.next;
+ can_spin_unlock_irqrestore(&canque_dead_func_lock,flags);
+ /* lock can be released there, because only one instance of canque_dead_tl
+ can run at once and all other functions add ends only to head */
+ while(entry!=&canque_dead_ends){
+ qends=list_entry(entry,struct canque_ends_t,dead_peers);
+ entry=entry->next;
+ if(!list_empty(&qends->inlist))
+ continue;
+ if(!list_empty(&qends->outlist))
+ continue;
+ can_spin_lock_irqsave(&canque_dead_func_lock, flags);
+ list_del(&qends->dead_peers);
+ can_spin_unlock_irqrestore(&canque_dead_func_lock,flags);
+ DEBUGQUE("ends structure disposed\n");
+ #ifdef CAN_WITH_RTL
+ if(qends->ends_flags&CAN_ENDSF_MEM_RTL){
+ canque_ends_free_rtl(qends);
+ continue;
+ }
+ #endif /*CAN_WITH_RTL*/
+ kfree(qends);
+ }
+
+}
+
+static inline void canque_dead_tasklet_schedule(void)
+{
+ #ifdef CAN_WITH_RTL
+ if(!rtl_rt_system_is_idle()){
+ set_bit(CAN_RTL2LIN_PEND_DEAD_b,&canqueue_rtl2lin_pend);
+ rtl_global_pend_irq (canqueue_rtl_irq);
+ return;
+ }
+ #endif /*CAN_WITH_RTL*/
+
+ tasklet_schedule(&canque_dead_tl);
+}
+
+
+void canque_edge_do_dead(struct canque_edge_t *edge)
+{
+ can_spin_irqflags_t flags;
+
+ canque_notify_bothends(edge,CANQUEUE_NOTIFY_NOUSR);
+ #ifdef CAN_WITH_RTL
+ /* The problem of the above call is, that in RT-Linux to Linux notify
+ case is edge scheduled for delayed notify delivery, this needs
+ to be reflected there */
+ if(atomic_read(&edge->edge_used)>0){
+ can_spin_lock_irqsave(&edge->inends->ends_lock, flags);
+ can_spin_lock(&edge->outends->ends_lock);
+ if(atomic_read(&edge->edge_used)>0){
+ /* left edge to live for a while, banshee comes again in a while */
+ canque_fifo_clear_fl(&edge->fifo,DEAD);
+ can_spin_unlock(&edge->outends->ends_lock);
+ can_spin_unlock_irqrestore(&edge->inends->ends_lock, flags);
+ can_printk(KERN_ERR "can_quertl (debug): canque_edge_do_dead postponed\n");
+ return;
+ }
+ can_spin_unlock(&edge->outends->ends_lock);
+ can_spin_unlock_irqrestore(&edge->inends->ends_lock, flags);
+ }
+ #endif /*CAN_WITH_RTL*/
+
+ if(canqueue_disconnect_edge(edge)<0){
+ ERRMSGQUE("canque_edge_do_dead: canqueue_disconnect_edge failed !!!\n");
+ return;
+ }
+
+ can_spin_lock_irqsave(&canque_dead_func_lock, flags);
+ list_add(&edge->inpeers,&canque_dead_edges);
+ can_spin_unlock_irqrestore(&canque_dead_func_lock, flags);
+ canque_dead_tasklet_schedule();
+}
+
+
+
+/*if(qends->ends_flags & CAN_ENDSF_DEAD){
+ can_spin_lock_irqsave(&canque_dead_func_lock, flags);
+ list_del(&qends->dead_peers);
+ list_add(&qends->dead_peers,&canque_dead_ends);
+ can_spin_unlock_irqrestore(&canque_dead_func_lock, flags);
+ tasklet_schedule(&canque_dead_tl);
+}*/
+
+
+/**
+ * canqueue_notify_kern - notification callback handler for Linux userspace clients
+ * @qends: pointer to the callback side ends structure
+ * @qedge: edge which invoked notification
+ * @what: notification type
+ *
+ * The notification event is handled directly by call of this function except case,
+ * when called from RT-Linux context in mixed mode Linux/RT-Linux compilation.
+ * It is not possible to directly call Linux kernel synchronization primitives
+ * in such case. The notification request is postponed and signaled by @pending_inops flags
+ * by call canqueue_rtl2lin_check_and_pend() function.
+ * The edge reference count is increased until until all pending notifications are processed.
+ */
+void canqueue_notify_kern(struct canque_ends_t *qends, struct canque_edge_t *qedge, int what)
+{
+ DEBUGQUE("canqueue_notify_kern for edge %d, use %d and event %d\n",
+ qedge->edge_num,(int)atomic_read(&qedge->edge_used),what);
+
+ /* delay event delivery for RT-Linux -> kernel notifications */
+ if(canqueue_rtl2lin_check_and_pend(qends,qedge,what)){
+ DEBUGQUE("canqueue_notify_kern postponed\n");
+ return;
+ }
+
+ switch(what){
+ case CANQUEUE_NOTIFY_EMPTY:
+ wake_up(&qends->endinfo.fileinfo.emptyq);
+ if(canque_fifo_test_and_clear_fl(&qedge->fifo, FREEONEMPTY))
+ canque_edge_decref(qedge);
+ break;
+ case CANQUEUE_NOTIFY_SPACE:
+ wake_up(&qends->endinfo.fileinfo.writeq);
+ #ifdef CAN_ENABLE_KERN_FASYNC
+ /* Asynchronous I/O processing */
+ kill_fasync(&qends->endinfo.fileinfo.fasync, SIGIO, POLL_OUT);
+ #endif /*CAN_ENABLE_KERN_FASYNC*/
+ break;
+ case CANQUEUE_NOTIFY_PROC:
+ wake_up(&qends->endinfo.fileinfo.readq);
+ #ifdef CAN_ENABLE_KERN_FASYNC
+ /* Asynchronous I/O processing */
+ kill_fasync(&qends->endinfo.fileinfo.fasync, SIGIO, POLL_IN);
+ #endif /*CAN_ENABLE_KERN_FASYNC*/
+ break;
+ case CANQUEUE_NOTIFY_NOUSR:
+ wake_up(&qends->endinfo.fileinfo.readq);
+ wake_up(&qends->endinfo.fileinfo.writeq);
+ wake_up(&qends->endinfo.fileinfo.emptyq);
+ break;
+ case CANQUEUE_NOTIFY_DEAD_WANTED:
+ case CANQUEUE_NOTIFY_DEAD:
+ if(canque_fifo_test_and_clear_fl(&qedge->fifo, READY))
+ canque_edge_decref(qedge);
+ break;
+ case CANQUEUE_NOTIFY_ATTACH:
+ break;
+ }
+}
+
+/**
+ * canqueue_ends_init_kern - Linux userspace clients specific ends initialization
+ * @qends: pointer to the callback side ends structure
+ */
+int canqueue_ends_init_kern(struct canque_ends_t *qends)
+{
+ canqueue_ends_init_gen(qends);
+ qends->context=NULL;
+ init_waitqueue_head(&qends->endinfo.fileinfo.readq);
+ init_waitqueue_head(&qends->endinfo.fileinfo.writeq);
+ init_waitqueue_head(&qends->endinfo.fileinfo.emptyq);
+ #ifdef CAN_ENABLE_KERN_FASYNC
+ qends->endinfo.fileinfo.fasync=NULL;
+ #endif /*CAN_ENABLE_KERN_FASYNC*/
+
+ qends->notify=canqueue_notify_kern;
+ DEBUGQUE("canqueue_ends_init_kern\n");
+ return 0;
+}
+
+
+/**
+ * canque_get_inslot4id_wait_kern - find or wait for best outgoing edge and slot for given ID
+ * @qends: ends structure belonging to calling communication object
+ * @qedgep: place to store pointer to found edge
+ * @slotp: place to store pointer to allocated slot
+ * @cmd: command type for slot
+ * @id: communication ID of message to send into edge
+ * @prio: optional priority of message
+ *
+ * Same as canque_get_inslot4id(), except, that it waits for free slot
+ * in case, that queue is full. Function is specific for Linux userspace clients.
+ * Return Value: If there is no usable edge negative value is returned.
+ */
+int canque_get_inslot4id_wait_kern(struct canque_ends_t *qends,
+ struct canque_edge_t **qedgep, struct canque_slot_t **slotp,
+ int cmd, unsigned long id, int prio)
+{
+ int ret=-1;
+ DEBUGQUE("canque_get_inslot4id_wait_kern for cmd %d, id %ld, prio %d\n",cmd,id,prio);
+ wait_event_interruptible((qends->endinfo.fileinfo.writeq),
+ (ret=canque_get_inslot4id(qends,qedgep,slotp,cmd,id,prio))!=-1);
+ return ret;
+}
+
+/**
+ * canque_get_outslot_wait_kern - receive or wait for ready slot for given ends
+ * @qends: ends structure belonging to calling communication object
+ * @qedgep: place to store pointer to found edge
+ * @slotp: place to store pointer to received slot
+ *
+ * The same as canque_test_outslot(), except it waits in the case, that there is
+ * no ready slot for given ends. Function is specific for Linux userspace clients.
+ * Return Value: Negative value informs, that there is no ready output
+ * slot for given ends. Positive value is equal to the command
+ * slot has been allocated by the input side.
+ */
+int canque_get_outslot_wait_kern(struct canque_ends_t *qends,
+ struct canque_edge_t **qedgep, struct canque_slot_t **slotp)
+{
+ int ret=-1;
+ DEBUGQUE("canque_get_outslot_wait_kern\n");
+ wait_event_interruptible((qends->endinfo.fileinfo.readq),
+ (ret=canque_test_outslot(qends,qedgep,slotp))!=-1);
+ return ret;
+}
+
+/**
+ * canque_sync_wait_kern - wait for all slots processing
+ * @qends: ends structure belonging to calling communication object
+ * @qedge: pointer to edge
+ *
+ * Functions waits for ends transition into empty state.
+ * Return Value: Positive value indicates, that edge empty state has been reached.
+ * Negative or zero value informs about interrupted wait or other problem.
+ */
+int canque_sync_wait_kern(struct canque_ends_t *qends, struct canque_edge_t *qedge)
+{
+ int ret=-1;
+ DEBUGQUE("canque_sync_wait_kern\n");
+ wait_event_interruptible((qends->endinfo.fileinfo.emptyq),
+ (ret=canque_fifo_test_fl(&qedge->fifo,EMPTY)?1:0));
+ return ret;
+}
+
+
+/**
+ * canque_fifo_init_kern - initialize one CAN FIFO
+ * @fifo: pointer to the FIFO structure
+ * @slotsnr: number of requested slots
+ *
+ * Return Value: The negative value indicates, that there is no memory
+ * to allocate space for the requested number of the slots.
+ */
+int canque_fifo_init_kern(struct canque_fifo_t *fifo, int slotsnr)
+{
+ int size;
+ if(!slotsnr) slotsnr=MAX_BUF_LENGTH;
+ size=sizeof(struct canque_slot_t)*slotsnr;
+ fifo->entry=kmalloc(size,GFP_KERNEL);
+ if(!fifo->entry) return -1;
+ fifo->slotsnr=slotsnr;
+ return canque_fifo_init_slots(fifo);
+}
+
+/**
+ * canque_fifo_done_kern - frees slots allocated for CAN FIFO
+ * @fifo: pointer to the FIFO structure
+ */
+int canque_fifo_done_kern(struct canque_fifo_t *fifo)
+{
+ if(fifo->entry)
+ kfree(fifo->entry);
+ fifo->entry=NULL;
+ return 1;
+}
+
+
+/**
+ * canque_new_edge_kern - allocate new edge structure in the Linux kernel context
+ * @slotsnr: required number of slots in the newly allocated edge structure
+ *
+ * Return Value: Returns pointer to allocated slot structure or %NULL if
+ * there is not enough memory to process operation.
+ */
+struct canque_edge_t *canque_new_edge_kern(int slotsnr)
+{
+ struct canque_edge_t *qedge;
+ qedge = (struct canque_edge_t *)kmalloc(sizeof(struct canque_edge_t), GFP_KERNEL);
+ if(qedge == NULL) return NULL;
+
+ memset(qedge,0,sizeof(struct canque_edge_t));
+ can_spin_lock_init(&qedge->fifo.fifo_lock);
+ if(canque_fifo_init_kern(&qedge->fifo, slotsnr)<0){
+ kfree(qedge);
+ DEBUGQUE("canque_new_edge_kern failed\n");
+ return NULL;
+ }
+ atomic_set(&qedge->edge_used,1);
+ qedge->filtid = 0;
+ qedge->filtmask = canque_filtid2internal(0l, (processlocal<2)? MSG_LOCAL:0);
+ qedge->edge_prio = 0;
+ #ifdef CAN_DEBUG
+ /* not exactly clean, but enough for debugging */
+ atomic_inc(&edge_num_cnt);
+ qedge->edge_num=atomic_read(&edge_num_cnt);
+ #endif /* CAN_DEBUG */
+ DEBUGQUE("canque_new_edge_kern %d\n",qedge->edge_num);
+ return qedge;
+}
+
+#ifdef USE_SYNC_DISCONNECT_EDGE_KERN
+
+/*not included in doc
+ * canqueue_disconnect_edge_kern - disconnect edge from communicating entities with wait
+ * @qends: ends structure belonging to calling communication object
+ * @qedge: pointer to edge
+ *
+ * Same as canqueue_disconnect_edge(), but tries to wait for state with zero
+ * use counter.
+ * Return Value: Negative value means, that edge is used and cannot
+ * be disconnected yet. Operation has to be delayed.
+ */
+int canqueue_disconnect_edge_kern(struct canque_ends_t *qends, struct canque_edge_t *qedge)
+{
+ canque_fifo_set_fl(&qedge->fifo,BLOCK);
+ DEBUGQUE("canqueue_disconnect_edge_kern %d called\n",qedge->edge_num);
+ if(!canque_fifo_test_and_set_fl(&qedge->fifo,DEAD)){
+ canque_notify_bothends(qedge, CANQUEUE_NOTIFY_DEAD);
+
+ if(atomic_read(&qedge->edge_used)>0)
+ atomic_dec(&qedge->edge_used);
+
+ DEBUGQUE("canqueue_disconnect_edge_kern %d waiting\n",qedge->edge_num);
+ wait_event((qends->endinfo.fileinfo.emptyq),
+ (canqueue_disconnect_edge(qedge)>=0));
+
+ /*set_current_state(TASK_UNINTERRUPTIBLE);*/
+ /*schedule_timeout(HZ);*/
+ return 0;
+ } else {
+ DEBUGQUE("canqueue_disconnect_edge_kern cannot set DEAD\n");
+ return -1;
+ }
+}
+
+
+int canqueue_disconnect_list_kern(struct canque_ends_t *qends, struct list_head *list)
+{
+ struct canque_edge_t *edge;
+ can_spin_irqflags_t flags;
+ for(;;){
+ can_spin_lock_irqsave(&qends->ends_lock,flags);
+ if(list_empty(list)){
+ can_spin_unlock_irqrestore(&qends->ends_lock,flags);
+ return 0;
+ }
+ if(list == &qends->inlist)
+ edge=list_entry(list->next,struct canque_edge_t,inpeers);
+ else
+ edge=list_entry(list->next,struct canque_edge_t,outpeers);
+ atomic_inc(&edge->edge_used);
+ can_spin_unlock_irqrestore(&qends->ends_lock,flags);
+ if(canqueue_disconnect_edge_kern(qends, edge)>=0) {
+ /* Free edge memory */
+ canque_fifo_done_kern(&edge->fifo);
+ kfree(edge);
+ }else{
+ canque_notify_bothends(edge, CANQUEUE_NOTIFY_DEAD_WANTED);
+ canque_edge_decref(edge);
+ DEBUGQUE("canqueue_disconnect_list_kern in troubles\n");
+ DEBUGQUE("the edge %d has usage count %d and flags %ld\n",edge->edge_num,atomic_read(&edge->edge_used),edge->fifo.fifo_flags);
+ return -1;
+ }
+ }
+}
+
+#endif /*USE_SYNC_DISCONNECT_EDGE_KERN*/
+
+
+int canqueue_ends_sync_all_kern(struct canque_ends_t *qends)
+{
+ struct canque_edge_t *qedge;
+
+ canque_for_each_inedge(qends, qedge){
+ DEBUGQUE("canque_sync_wait_kern called for edge %d\n",qedge->edge_num);
+ canque_sync_wait_kern(qends, qedge);
+ }
+ return 0;
+}
+
+
+void canqueue_ends_dispose_postpone(struct canque_ends_t *qends)
+{
+ can_spin_irqflags_t flags;
+
+ can_spin_lock_irqsave(&canque_dead_func_lock, flags);
+ qends->ends_flags |= CAN_ENDSF_DEAD;
+ list_add(&qends->dead_peers,&canque_dead_ends);
+ can_spin_unlock_irqrestore(&canque_dead_func_lock, flags);
+ canque_dead_tasklet_schedule();
+}
+
+
+/**
+ * canqueue_ends_dispose_kern - finalizing of the ends structure for Linux kernel clients
+ * @qends: pointer to ends structure
+ * @sync: flag indicating, that user wants to wait for processing of all remaining
+ * messages
+ *
+ * Return Value: Function should be designed such way to not fail.
+ */
+int canqueue_ends_dispose_kern(struct canque_ends_t *qends, int sync)
+{
+ int delayed;
+
+ DEBUGQUE("canqueue_ends_dispose_kern\n");
+ canqueue_block_inlist(qends);
+ canqueue_block_outlist(qends);
+
+ /*Wait for sending of all pending messages in the output FIFOs*/
+ if(sync)
+ canqueue_ends_sync_all_kern(qends);
+
+ /* Finish or kill all outgoing edges listed in inends */
+ delayed=canqueue_ends_kill_inlist(qends, 1);
+ /* Kill all incoming edges listed in outends */
+ delayed|=canqueue_ends_kill_outlist(qends);
+
+ wake_up(&qends->endinfo.fileinfo.readq);
+ wake_up(&qends->endinfo.fileinfo.writeq);
+ wake_up(&qends->endinfo.fileinfo.emptyq);
+
+ if(delayed){
+ canqueue_ends_dispose_postpone(qends);
+
+ DEBUGQUE("canqueue_ends_dispose_kern delayed\n");
+ return 1;
+ }
+
+ kfree(qends);
+ DEBUGQUE("canqueue_ends_dispose_kern finished\n");
+ return 0;
+}
+
+void canqueue_kern_initialize()
+{
+ can_spin_lock_init(&canque_dead_func_lock);
+}
--- /dev/null
+/* can_quekern.c - CAN message queues functions for the Linux kernel
+ * Linux CAN-bus device driver.
+ * New CAN queues by Pavel Pisa - OCERA team member
+ * email:pisa@cmp.felk.cvut.cz
+ * This software is released under the GPL-License.
+ * Version lincan-0.3 17 Jun 2004
+ */
+
+#include "./can/can.h"
+#include "./can/can_sysdep.h"
+#include "./can/can_queue.h"
+
+//#define CAN_DEBUG
+
+extern atomic_t edge_num_cnt;
+
+#ifdef CAN_DEBUG
+ #define DEBUGQUE(fmt,args...) can_printk(KERN_ERR "can_quekern (debug): " fmt,\
+ ##args)
+
+#else
+ #define DEBUGQUE(fmt,args...)
+#endif
+
+#define ERRMSGQUE(fmt,args...) can_printk(KERN_ERR "can_quekern: " fmt,\
+ ##args)
+
+
+/*
+ * Modifies Tx message processing
+ * 0 .. local message processing disabled
+ * 1 .. local messages disabled by default but can be enabled by canque_set_filt
+ * 2 .. local messages enabled by default, can be disabled by canque_set_filt
+ */
+extern int processlocal;
+
+void canque_dead_func(unsigned long data);
+
+/* Support for dead ends structures left after client close */
+can_spinlock_t canque_dead_func_lock;
+LIST_HEAD(canque_dead_ends);
+/* retrieved by list_entry(canque_dead_ends.next,struct canque_ends_t,dead_peers) */
+LIST_HEAD(canque_dead_edges);
+/* retrieved by list_entry(canque_dead_edges.next,struct canque_edge_t,inpeers) */
+DECLARE_TASKLET(canque_dead_tl, canque_dead_func, 0);
+/* activated by tasklet_schedule(&canque_dead_tl) */
+
+
+static inline
+struct canque_edge_t *canque_dead_edges_cut_first(void)
+{
+ can_spin_irqflags_t flags;
+ struct canque_edge_t *edge;
+ can_spin_lock_irqsave(&canque_dead_func_lock, flags);
+ if(list_empty(&canque_dead_edges))
+ edge=NULL;
+ else{
+ edge=list_entry(canque_dead_edges.next,struct canque_edge_t,inpeers);
+ list_del(&edge->inpeers);
+ }
+ can_spin_unlock_irqrestore(&canque_dead_func_lock, flags);
+ return edge;
+}
+
+void canque_dead_func(unsigned long data)
+{
+ can_spin_irqflags_t flags;
+ struct canque_edge_t *qedge;
+ struct canque_ends_t *qends;
+ struct list_head *entry;
+
+ while((qedge=canque_dead_edges_cut_first())){
+ DEBUGQUE("edge %d disposed\n",qedge->edge_num);
+ #ifdef CAN_WITH_RTL
+ if(canque_fifo_test_fl(&qedge->fifo,RTL_MEM)){
+ canque_dispose_edge_rtl(qedge);
+ continue;
+ }
+ #endif /*CAN_WITH_RTL*/
+ canque_fifo_done_kern(&qedge->fifo);
+ free(qedge);
+ }
+
+ can_spin_lock_irqsave(&canque_dead_func_lock, flags);
+ entry=canque_dead_ends.next;
+ can_spin_unlock_irqrestore(&canque_dead_func_lock,flags);
+ /* lock can be released there, because only one instance of canque_dead_tl
+ can run at once and all other functions add ends only to head */
+ while(entry!=&canque_dead_ends){
+ qends=list_entry(entry,struct canque_ends_t,dead_peers);
+ entry=entry->next;
+ if(!list_empty(&qends->inlist))
+ continue;
+ if(!list_empty(&qends->outlist))
+ continue;
+ can_spin_lock_irqsave(&canque_dead_func_lock, flags);
+ list_del(&qends->dead_peers);
+ can_spin_unlock_irqrestore(&canque_dead_func_lock,flags);
+ DEBUGQUE("ends structure disposed\n");
+ #ifdef CAN_WITH_RTL
+ if(qends->ends_flags&CAN_ENDSF_MEM_RTL){
+ canque_ends_free_rtl(qends);
+ continue;
+ }
+ #endif /*CAN_WITH_RTL*/
+ free(qends);
+ }
+
+}
+
+static inline void canque_dead_tasklet_schedule(void)
+{
+ #ifdef CAN_WITH_RTL
+ if(!rtl_rt_system_is_idle()){
+ set_bit(CAN_RTL2LIN_PEND_DEAD_b,&canqueue_rtl2lin_pend);
+ rtl_global_pend_irq (canqueue_rtl_irq);
+ return;
+ }
+ #endif /*CAN_WITH_RTL*/
+
+ tasklet_schedule(&canque_dead_tl);
+}
+
+
+void canque_edge_do_dead(struct canque_edge_t *edge)
+{
+ can_spin_irqflags_t flags;
+
+ canque_notify_bothends(edge,CANQUEUE_NOTIFY_NOUSR);
+ #ifdef CAN_WITH_RTL
+ /* The problem of the above call is, that in RT-Linux to Linux notify
+ case is edge scheduled for delayed notify delivery, this needs
+ to be reflected there */
+ if(atomic_read(&edge->edge_used)>0){
+ can_spin_lock_irqsave(&edge->inends->ends_lock, flags);
+ can_spin_lock(&edge->outends->ends_lock);
+ if(atomic_read(&edge->edge_used)>0){
+ /* left edge to live for a while, banshee comes again in a while */
+ canque_fifo_clear_fl(&edge->fifo,DEAD);
+ can_spin_unlock(&edge->outends->ends_lock);
+ can_spin_unlock_irqrestore(&edge->inends->ends_lock, flags);
+ can_printk(KERN_ERR "can_quertl (debug): canque_edge_do_dead postponed\n");
+ return;
+ }
+ can_spin_unlock(&edge->outends->ends_lock);
+ can_spin_unlock_irqrestore(&edge->inends->ends_lock, flags);
+ }
+ #endif /*CAN_WITH_RTL*/
+
+ if(canqueue_disconnect_edge(edge)<0){
+ ERRMSGQUE("canque_edge_do_dead: canqueue_disconnect_edge failed !!!\n");
+ return;
+ }
+
+ can_spin_lock_irqsave(&canque_dead_func_lock, flags);
+ list_add(&edge->inpeers,&canque_dead_edges);
+ can_spin_unlock_irqrestore(&canque_dead_func_lock, flags);
+ canque_dead_tasklet_schedule();
+}
+
+
+
+/*if(qends->ends_flags & CAN_ENDSF_DEAD){
+ can_spin_lock_irqsave(&canque_dead_func_lock, flags);
+ list_del(&qends->dead_peers);
+ list_add(&qends->dead_peers,&canque_dead_ends);
+ can_spin_unlock_irqrestore(&canque_dead_func_lock, flags);
+ tasklet_schedule(&canque_dead_tl);
+}*/
+
+
+/**
+ * canqueue_notify_kern - notification callback handler for Linux userspace clients
+ * @qends: pointer to the callback side ends structure
+ * @qedge: edge which invoked notification
+ * @what: notification type
+ *
+ * The notification event is handled directly by call of this function except case,
+ * when called from RT-Linux context in mixed mode Linux/RT-Linux compilation.
+ * It is not possible to directly call Linux kernel synchronization primitives
+ * in such case. The notification request is postponed and signaled by @pending_inops flags
+ * by call canqueue_rtl2lin_check_and_pend() function.
+ * The edge reference count is increased until until all pending notifications are processed.
+ */
+void canqueue_notify_kern(struct canque_ends_t *qends, struct canque_edge_t *qedge, int what)
+{
+ DEBUGQUE("canqueue_notify_kern for edge %d, use %d and event %d\n",
+ qedge->edge_num,(int)atomic_read(&qedge->edge_used),what);
+
+ /* delay event delivery for RT-Linux -> kernel notifications */
+ if(canqueue_rtl2lin_check_and_pend(qends,qedge,what)){
+ DEBUGQUE("canqueue_notify_kern postponed\n");
+ return;
+ }
+
+ switch(what){
+ case CANQUEUE_NOTIFY_EMPTY:
+ wake_up(&qends->endinfo.fileinfo.emptyq);
+ if(canque_fifo_test_and_clear_fl(&qedge->fifo, FREEONEMPTY))
+ canque_edge_decref(qedge);
+ break;
+ case CANQUEUE_NOTIFY_SPACE:
+ wake_up(&qends->endinfo.fileinfo.writeq);
+ #ifdef CAN_ENABLE_KERN_FASYNC
+ /* Asynchronous I/O processing */
+ kill_fasync(&qends->endinfo.fileinfo.fasync, SIGIO, POLL_OUT);
+ #endif /*CAN_ENABLE_KERN_FASYNC*/
+ break;
+ case CANQUEUE_NOTIFY_PROC:
+ wake_up(&qends->endinfo.fileinfo.readq);
+ #ifdef CAN_ENABLE_KERN_FASYNC
+ /* Asynchronous I/O processing */
+ kill_fasync(&qends->endinfo.fileinfo.fasync, SIGIO, POLL_IN);
+ #endif /*CAN_ENABLE_KERN_FASYNC*/
+ break;
+ case CANQUEUE_NOTIFY_NOUSR:
+ wake_up(&qends->endinfo.fileinfo.readq);
+ wake_up(&qends->endinfo.fileinfo.writeq);
+ wake_up(&qends->endinfo.fileinfo.emptyq);
+ break;
+ case CANQUEUE_NOTIFY_DEAD_WANTED:
+ case CANQUEUE_NOTIFY_DEAD:
+ if(canque_fifo_test_and_clear_fl(&qedge->fifo, READY))
+ canque_edge_decref(qedge);
+ break;
+ case CANQUEUE_NOTIFY_ATTACH:
+ break;
+ }
+}
+
+/**
+ * canqueue_ends_init_kern - Linux userspace clients specific ends initialization
+ * @qends: pointer to the callback side ends structure
+ */
+int canqueue_ends_init_kern(struct canque_ends_t *qends)
+{
+ canqueue_ends_init_gen(qends);
+ qends->context=NULL;
+ init_waitqueue_head(&qends->endinfo.fileinfo.readq);
+ init_waitqueue_head(&qends->endinfo.fileinfo.writeq);
+ init_waitqueue_head(&qends->endinfo.fileinfo.emptyq);
+ #ifdef CAN_ENABLE_KERN_FASYNC
+ qends->endinfo.fileinfo.fasync=NULL;
+ #endif /*CAN_ENABLE_KERN_FASYNC*/
+
+ qends->notify=canqueue_notify_kern;
+ DEBUGQUE("canqueue_ends_init_kern\n");
+ return 0;
+}
+
+
+/**
+ * canque_get_inslot4id_wait_kern - find or wait for best outgoing edge and slot for given ID
+ * @qends: ends structure belonging to calling communication object
+ * @qedgep: place to store pointer to found edge
+ * @slotp: place to store pointer to allocated slot
+ * @cmd: command type for slot
+ * @id: communication ID of message to send into edge
+ * @prio: optional priority of message
+ *
+ * Same as canque_get_inslot4id(), except, that it waits for free slot
+ * in case, that queue is full. Function is specific for Linux userspace clients.
+ * Return Value: If there is no usable edge negative value is returned.
+ */
+int canque_get_inslot4id_wait_kern(struct canque_ends_t *qends,
+ struct canque_edge_t **qedgep, struct canque_slot_t **slotp,
+ int cmd, unsigned long id, int prio)
+{
+ int ret=-1;
+ DEBUGQUE("canque_get_inslot4id_wait_kern for cmd %d, id %ld, prio %d\n",cmd,id,prio);
+ wait_event_interruptible((qends->endinfo.fileinfo.writeq),
+ (ret=canque_get_inslot4id(qends,qedgep,slotp,cmd,id,prio))!=-1);
+ return ret;
+}
+
+/**
+ * canque_get_outslot_wait_kern - receive or wait for ready slot for given ends
+ * @qends: ends structure belonging to calling communication object
+ * @qedgep: place to store pointer to found edge
+ * @slotp: place to store pointer to received slot
+ *
+ * The same as canque_test_outslot(), except it waits in the case, that there is
+ * no ready slot for given ends. Function is specific for Linux userspace clients.
+ * Return Value: Negative value informs, that there is no ready output
+ * slot for given ends. Positive value is equal to the command
+ * slot has been allocated by the input side.
+ */
+int canque_get_outslot_wait_kern(struct canque_ends_t *qends,
+ struct canque_edge_t **qedgep, struct canque_slot_t **slotp)
+{
+ int ret=-1;
+ DEBUGQUE("canque_get_outslot_wait_kern\n");
+ wait_event_interruptible((qends->endinfo.fileinfo.readq),
+ (ret=canque_test_outslot(qends,qedgep,slotp))!=-1);
+ return ret;
+}
+
+/**
+ * canque_sync_wait_kern - wait for all slots processing
+ * @qends: ends structure belonging to calling communication object
+ * @qedge: pointer to edge
+ *
+ * Functions waits for ends transition into empty state.
+ * Return Value: Positive value indicates, that edge empty state has been reached.
+ * Negative or zero value informs about interrupted wait or other problem.
+ */
+int canque_sync_wait_kern(struct canque_ends_t *qends, struct canque_edge_t *qedge)
+{
+ int ret=-1;
+ DEBUGQUE("canque_sync_wait_kern\n");
+ wait_event_interruptible((qends->endinfo.fileinfo.emptyq),
+ (ret=canque_fifo_test_fl(&qedge->fifo,EMPTY)?1:0));
+ return ret;
+}
+
+
+/**
+ * canque_fifo_init_kern - initialize one CAN FIFO
+ * @fifo: pointer to the FIFO structure
+ * @slotsnr: number of requested slots
+ *
+ * Return Value: The negative value indicates, that there is no memory
+ * to allocate space for the requested number of the slots.
+ */
+int canque_fifo_init_kern(struct canque_fifo_t *fifo, int slotsnr)
+{
+ int size;
+ if(!slotsnr) slotsnr=MAX_BUF_LENGTH;
+ size=sizeof(struct canque_slot_t)*slotsnr;
+ fifo->entry=malloc(size);
+ if(!fifo->entry) return -1;
+ fifo->slotsnr=slotsnr;
+ return canque_fifo_init_slots(fifo);
+}
+
+/**
+ * canque_fifo_done_kern - frees slots allocated for CAN FIFO
+ * @fifo: pointer to the FIFO structure
+ */
+int canque_fifo_done_kern(struct canque_fifo_t *fifo)
+{
+ if(fifo->entry)
+ free(fifo->entry);
+ fifo->entry=NULL;
+ return 1;
+}
+
+
+/**
+ * canque_new_edge_kern - allocate new edge structure in the Linux kernel context
+ * @slotsnr: required number of slots in the newly allocated edge structure
+ *
+ * Return Value: Returns pointer to allocated slot structure or %NULL if
+ * there is not enough memory to process operation.
+ */
+struct canque_edge_t *canque_new_edge_kern(int slotsnr)
+{
+ struct canque_edge_t *qedge;
+ qedge = (struct canque_edge_t *)malloc(sizeof(struct canque_edge_t));
+ if(qedge == NULL) return NULL;
+
+ memset(qedge,0,sizeof(struct canque_edge_t));
+ can_spin_lock_init(&qedge->fifo.fifo_lock);
+ if(canque_fifo_init_kern(&qedge->fifo, slotsnr)<0){
+ free(qedge);
+ DEBUGQUE("canque_new_edge_kern failed\n");
+ return NULL;
+ }
+ atomic_set(&qedge->edge_used,1);
+ qedge->filtid = 0;
+ qedge->filtmask = canque_filtid2internal(0l, (processlocal<2)? MSG_LOCAL:0);
+ qedge->edge_prio = 0;
+ #ifdef CAN_DEBUG
+ /* not exactly clean, but enough for debugging */
+ atomic_inc(&edge_num_cnt);
+ qedge->edge_num=atomic_read(&edge_num_cnt);
+ #endif /* CAN_DEBUG */
+ DEBUGQUE("canque_new_edge_kern %d\n",qedge->edge_num);
+ return qedge;
+}
+
+#ifdef USE_SYNC_DISCONNECT_EDGE_KERN
+
+/*not included in doc
+ * canqueue_disconnect_edge_kern - disconnect edge from communicating entities with wait
+ * @qends: ends structure belonging to calling communication object
+ * @qedge: pointer to edge
+ *
+ * Same as canqueue_disconnect_edge(), but tries to wait for state with zero
+ * use counter.
+ * Return Value: Negative value means, that edge is used and cannot
+ * be disconnected yet. Operation has to be delayed.
+ */
+int canqueue_disconnect_edge_kern(struct canque_ends_t *qends, struct canque_edge_t *qedge)
+{
+ canque_fifo_set_fl(&qedge->fifo,BLOCK);
+ DEBUGQUE("canqueue_disconnect_edge_kern %d called\n",qedge->edge_num);
+ if(!canque_fifo_test_and_set_fl(&qedge->fifo,DEAD)){
+ canque_notify_bothends(qedge, CANQUEUE_NOTIFY_DEAD);
+
+ if(atomic_read(&qedge->edge_used)>0)
+ atomic_dec(&qedge->edge_used);
+
+ DEBUGQUE("canqueue_disconnect_edge_kern %d waiting\n",qedge->edge_num);
+ wait_event((qends->endinfo.fileinfo.emptyq),
+ (canqueue_disconnect_edge(qedge)>=0));
+
+ /*set_current_state(TASK_UNINTERRUPTIBLE);*/
+ /*schedule_timeout(HZ);*/
+ return 0;
+ } else {
+ DEBUGQUE("canqueue_disconnect_edge_kern cannot set DEAD\n");
+ return -1;
+ }
+}
+
+
+int canqueue_disconnect_list_kern(struct canque_ends_t *qends, struct list_head *list)
+{
+ struct canque_edge_t *edge;
+ can_spin_irqflags_t flags;
+ for(;;){
+ can_spin_lock_irqsave(&qends->ends_lock,flags);
+ if(list_empty(list)){
+ can_spin_unlock_irqrestore(&qends->ends_lock,flags);
+ return 0;
+ }
+ if(list == &qends->inlist)
+ edge=list_entry(list->next,struct canque_edge_t,inpeers);
+ else
+ edge=list_entry(list->next,struct canque_edge_t,outpeers);
+ atomic_inc(&edge->edge_used);
+ can_spin_unlock_irqrestore(&qends->ends_lock,flags);
+ if(canqueue_disconnect_edge_kern(qends, edge)>=0) {
+ /* Free edge memory */
+ canque_fifo_done_kern(&edge->fifo);
+ free(edge);
+ }else{
+ canque_notify_bothends(edge, CANQUEUE_NOTIFY_DEAD_WANTED);
+ canque_edge_decref(edge);
+ DEBUGQUE("canqueue_disconnect_list_kern in troubles\n");
+ DEBUGQUE("the edge %d has usage count %d and flags %ld\n",edge->edge_num,atomic_read(&edge->edge_used),edge->fifo.fifo_flags);
+ return -1;
+ }
+ }
+}
+
+#endif /*USE_SYNC_DISCONNECT_EDGE_KERN*/
+
+
+int canqueue_ends_sync_all_kern(struct canque_ends_t *qends)
+{
+ struct canque_edge_t *qedge;
+
+ canque_for_each_inedge(qends, qedge){
+ DEBUGQUE("canque_sync_wait_kern called for edge %d\n",qedge->edge_num);
+ canque_sync_wait_kern(qends, qedge);
+ }
+ return 0;
+}
+
+
+void canqueue_ends_dispose_postpone(struct canque_ends_t *qends)
+{
+ can_spin_irqflags_t flags;
+
+ can_spin_lock_irqsave(&canque_dead_func_lock, flags);
+ qends->ends_flags |= CAN_ENDSF_DEAD;
+ list_add(&qends->dead_peers,&canque_dead_ends);
+ can_spin_unlock_irqrestore(&canque_dead_func_lock, flags);
+ canque_dead_tasklet_schedule();
+}
+
+
+/**
+ * canqueue_ends_dispose_kern - finalizing of the ends structure for Linux kernel clients
+ * @qends: pointer to ends structure
+ * @sync: flag indicating, that user wants to wait for processing of all remaining
+ * messages
+ *
+ * Return Value: Function should be designed such way to not fail.
+ */
+int canqueue_ends_dispose_kern(struct canque_ends_t *qends, int sync)
+{
+ int delayed;
+
+ DEBUGQUE("canqueue_ends_dispose_kern\n");
+ canqueue_block_inlist(qends);
+ canqueue_block_outlist(qends);
+
+ /*Wait for sending of all pending messages in the output FIFOs*/
+ if(sync)
+ canqueue_ends_sync_all_kern(qends);
+
+ /* Finish or kill all outgoing edges listed in inends */
+ delayed=canqueue_ends_kill_inlist(qends, 1);
+ /* Kill all incoming edges listed in outends */
+ delayed|=canqueue_ends_kill_outlist(qends);
+
+ wake_up(&qends->endinfo.fileinfo.readq);
+ wake_up(&qends->endinfo.fileinfo.writeq);
+ wake_up(&qends->endinfo.fileinfo.emptyq);
+
+ if(delayed){
+ canqueue_ends_dispose_postpone(qends);
+
+ DEBUGQUE("canqueue_ends_dispose_kern delayed\n");
+ return 1;
+ }
+
+ free(qends);
+ DEBUGQUE("canqueue_ends_dispose_kern finished\n");
+ return 0;
+}
+
+void canqueue_kern_initialize()
+{
+ can_spin_lock_init(&canque_dead_func_lock);
+}
--- /dev/null
+/* can_queue.c - CAN message queues
+ * Linux CAN-bus device driver.
+ * New CAN queues by Pavel Pisa - OCERA team member
+ * email:pisa@cmp.felk.cvut.cz
+ * This software is released under the GPL-License.
+ * Version lincan-0.3 17 Jun 2004
+ */
+
+#include "../include/can.h"
+#include "../include/can_sysdep.h"
+#include "../include/can_queue.h"
+
+/*
+ * Modifies Tx message processing
+ * 0 .. local message processing disabled
+ * 1 .. local messages disabled by default but can be enabled by canque_set_filt
+ * 2 .. local messages enabled by default, can be disabled by canque_set_filt
+ */
+extern int processlocal;
+
+atomic_t edge_num_cnt;
+
+//#define CAN_DEBUG
+#undef CAN_DEBUG
+
+#ifdef CAN_DEBUG
+ #define DEBUGQUE(fmt,args...) can_printk(KERN_ERR "can_queue (debug): " fmt,\
+ ##args)
+
+#else
+ #define DEBUGQUE(fmt,args...)
+#endif
+
+#define CANQUE_ROUNDROB 1
+
+
+/**
+ * canque_fifo_flush_slots - free all ready slots from the FIFO
+ * @fifo: pointer to the FIFO structure
+ *
+ * The caller should be prepared to handle situations, when some
+ * slots are held by input or output side slots processing.
+ * These slots cannot be flushed or their processing interrupted.
+ *
+ * Return Value: The nonzero value indicates, that queue has not been
+ * empty before the function call.
+ */
+int canque_fifo_flush_slots(struct canque_fifo_t *fifo)
+{
+ int ret;
+ can_spin_irqflags_t flags;
+ struct canque_slot_t *slot;
+ can_spin_lock_irqsave(&fifo->fifo_lock, flags);
+ slot=fifo->head;
+ if(slot){
+ *fifo->tail=fifo->flist;
+ fifo->flist=slot;
+ fifo->head=NULL;
+ fifo->tail=&fifo->head;
+ }
+ canque_fifo_clear_fl(fifo,FULL);
+ ret=canque_fifo_test_and_set_fl(fifo,EMPTY)?0:1;
+ can_spin_unlock_irqrestore(&fifo->fifo_lock, flags);
+ return ret;
+}
+
+
+/**
+ * canque_fifo_init_slots - initializes slot chain of one CAN FIFO
+ * @fifo: pointer to the FIFO structure
+ *
+ * Return Value: The negative value indicates, that there is no memory
+ * to allocate space for the requested number of the slots.
+ */
+int canque_fifo_init_slots(struct canque_fifo_t *fifo)
+{
+ struct canque_slot_t *slot;
+ int slotsnr=fifo->slotsnr;
+ if(!fifo->entry || !slotsnr) return -1;
+ slot=fifo->entry;
+ fifo->flist=slot;
+ while(--slotsnr){
+ slot->next=slot+1;
+ slot++;
+ }
+ slot->next=NULL;
+ fifo->head=NULL;
+ fifo->tail=&fifo->head;
+ canque_fifo_set_fl(fifo,EMPTY);
+ return 1;
+}
+
+/* atomic_dec_and_test(&qedge->edge_used);
+ void atomic_inc(&qedge->edge_used);
+ list_add_tail(struct list_head *new, struct list_head *head)
+ list_for_each(edge,qends->inlist);
+ list_entry(ptr, type, member)
+*/
+
+void __canque_edge_decref(struct canque_edge_t *edge)
+{
+ __canque_edge_decref_body(edge);
+}
+
+/**
+ * canque_get_inslot - finds one outgoing edge and allocates slot from it
+ * @qends: ends structure belonging to calling communication object
+ * @qedgep: place to store pointer to found edge
+ * @slotp: place to store pointer to allocated slot
+ * @cmd: command type for slot
+ *
+ * Function looks for the first non-blocked outgoing edge in @qends structure
+ * and tries to allocate slot from it.
+ * Return Value: If there is no usable edge or there is no free slot in edge
+ * negative value is returned.
+ */
+int canque_get_inslot(struct canque_ends_t *qends,
+ struct canque_edge_t **qedgep, struct canque_slot_t **slotp, int cmd)
+{
+ int ret=-2;
+ struct canque_edge_t *edge;
+
+ edge=canque_first_inedge(qends);
+ if(edge){
+ if(!canque_fifo_test_fl(&edge->fifo,BLOCK)){
+ ret=canque_fifo_get_inslot(&edge->fifo, slotp, cmd);
+ if(ret>0){
+ *qedgep=edge;
+ DEBUGQUE("canque_get_inslot cmd=%d found edge %d\n",cmd,edge->edge_num);
+ return ret;
+
+ }
+ }
+ canque_edge_decref(edge);
+ }
+ *qedgep=NULL;
+ DEBUGQUE("canque_get_inslot cmd=%d failed\n",cmd);
+ return ret;
+}
+
+/**
+ * canque_get_inslot4id - finds best outgoing edge and slot for given ID
+ * @qends: ends structure belonging to calling communication object
+ * @qedgep: place to store pointer to found edge
+ * @slotp: place to store pointer to allocated slot
+ * @cmd: command type for slot
+ * @id: communication ID of message to send into edge
+ * @prio: optional priority of message
+ *
+ * Function looks for the non-blocked outgoing edge accepting messages
+ * with given ID. If edge is found, slot is allocated from that edge.
+ * The edges with non-zero mask are preferred over edges open to all messages.
+ * If more edges with mask accepts given message ID, the edge with
+ * highest priority below or equal to required priority is selected.
+ * Return Value: If there is no usable edge or there is no free slot in edge
+ * negative value is returned.
+ */
+int canque_get_inslot4id(struct canque_ends_t *qends,
+ struct canque_edge_t **qedgep, struct canque_slot_t **slotp,
+ int cmd, unsigned long id, int prio)
+{
+ int ret=-2;
+ struct canque_edge_t *edge, *bestedge=NULL;
+
+ canque_for_each_inedge(qends, edge){
+ if(canque_fifo_test_fl(&edge->fifo,BLOCK))
+ continue;
+ if((id^edge->filtid)&edge->filtmask)
+ continue;
+ if(bestedge){
+ if(bestedge->filtmask){
+ if (!edge->filtmask) continue;
+ } else {
+ if(edge->filtmask){
+ canque_edge_decref(bestedge);
+ bestedge=edge;
+ canque_edge_incref(bestedge);
+ continue;
+ }
+ }
+ if(bestedge->edge_prio<edge->edge_prio){
+ if(edge->edge_prio>prio) continue;
+ } else {
+ if(bestedge->edge_prio<=prio) continue;
+ }
+ canque_edge_decref(bestedge);
+ }
+ bestedge=edge;
+ canque_edge_incref(bestedge);
+ }
+ if((edge=bestedge)!=NULL){
+ ret=canque_fifo_get_inslot(&edge->fifo, slotp, cmd);
+ if(ret>0){
+ *qedgep=edge;
+ DEBUGQUE("canque_get_inslot4id cmd=%d id=%ld prio=%d found edge %d\n",cmd,id,prio,edge->edge_num);
+ return ret;
+ }
+ canque_edge_decref(bestedge);
+ }
+ *qedgep=NULL;
+ DEBUGQUE("canque_get_inslot4id cmd=%d id=%ld prio=%d failed\n",cmd,id,prio);
+ return ret;
+}
+
+
+/**
+ * canque_put_inslot - schedules filled slot for processing
+ * @qends: ends structure belonging to calling communication object
+ * @qedge: edge slot belong to
+ * @slot: pointer to the prepared slot
+ *
+ * Puts slot previously acquired by canque_get_inslot() or canque_get_inslot4id()
+ * function call into FIFO queue and activates edge processing if needed.
+ * Return Value: Positive value informs, that activation of output end
+ * has been necessary
+ */
+int canque_put_inslot(struct canque_ends_t *qends,
+ struct canque_edge_t *qedge, struct canque_slot_t *slot)
+{
+ int ret;
+ ret=canque_fifo_put_inslot(&qedge->fifo,slot);
+ if(ret) {
+ canque_activate_edge(qends,qedge);
+ canque_notify_outends(qedge,CANQUEUE_NOTIFY_PROC);
+ }
+ canque_edge_decref(qedge);
+ DEBUGQUE("canque_put_inslot for edge %d returned %d\n",qedge->edge_num,ret);
+ return ret;
+}
+
+/**
+ * canque_abort_inslot - aborts preparation of the message in the slot
+ * @qends: ends structure belonging to calling communication object
+ * @qedge: edge slot belong to
+ * @slot: pointer to the previously allocated slot
+ *
+ * Frees slot previously acquired by canque_get_inslot() or canque_get_inslot4id()
+ * function call. Used when message copying into slot fails.
+ * Return Value: Positive value informs, that queue full state has been negated.
+ */
+int canque_abort_inslot(struct canque_ends_t *qends,
+ struct canque_edge_t *qedge, struct canque_slot_t *slot)
+{
+ int ret;
+ ret=canque_fifo_abort_inslot(&qedge->fifo,slot);
+ if(ret) {
+ canque_notify_outends(qedge,CANQUEUE_NOTIFY_SPACE);
+ }
+ canque_edge_decref(qedge);
+ DEBUGQUE("canque_abort_inslot for edge %d returned %d\n",qedge->edge_num,ret);
+ return ret;
+}
+
+/**
+ * canque_filter_msg2edges - sends message into all edges which accept its ID
+ * @qends: ends structure belonging to calling communication object
+ * @msg: pointer to CAN message
+ *
+ * Sends message to all outgoing edges connected to the given ends, which accepts
+ * message communication ID.
+ * Return Value: Returns number of edges message has been send to
+ */
+int canque_filter_msg2edges(struct canque_ends_t *qends, struct canmsg_t *msg)
+{
+ int destnr=0;
+ int ret;
+ unsigned long msgid;
+ struct canque_edge_t *edge;
+ struct canque_slot_t *slot;
+
+ DEBUGQUE("canque_filter_msg2edges for msg ID 0x%08lx and flags 0x%02x\n",
+ msg->id, msg->flags);
+ msgid = canque_filtid2internal(msg->id, msg->flags);
+
+ canque_for_each_inedge(qends, edge) {
+ if(canque_fifo_test_fl(&edge->fifo,BLOCK))
+ continue;
+ if((msgid^edge->filtid)&edge->filtmask)
+ continue;
+ ret=canque_fifo_get_inslot(&edge->fifo, &slot, 0);
+ if(ret>0){
+ slot->msg=*msg;
+ destnr++;
+ ret=canque_fifo_put_inslot(&edge->fifo,slot);
+ if(ret) {
+ canque_activate_edge(qends,edge);
+ canque_notify_outends(edge,CANQUEUE_NOTIFY_PROC);
+ }
+
+ }
+ }
+ DEBUGQUE("canque_filter_msg2edges sent msg ID %ld to %d edges\n",msg->id,destnr);
+ return destnr;
+}
+
+/**
+ * canque_test_outslot - test and retrieve ready slot for given ends
+ * @qends: ends structure belonging to calling communication object
+ * @qedgep: place to store pointer to found edge
+ * @slotp: place to store pointer to received slot
+ *
+ * Function takes highest priority active incoming edge and retrieves
+ * oldest ready slot from it.
+ * Return Value: Negative value informs, that there is no ready output
+ * slot for given ends. Positive value is equal to the command
+ * slot has been allocated by the input side.
+ */
+int canque_test_outslot(struct canque_ends_t *qends,
+ struct canque_edge_t **qedgep, struct canque_slot_t **slotp)
+{
+ can_spin_irqflags_t flags;
+ int prio;
+ struct canque_edge_t *edge;
+ int ret;
+
+ can_spin_lock_irqsave(&qends->ends_lock, flags);
+ for(prio=CANQUEUE_PRIO_NR;--prio>=0;){
+ while(!list_empty(&qends->active[prio])){
+ edge=list_entry(qends->active[prio].next,struct canque_edge_t,activepeers);
+ if(!canque_fifo_test_fl(&edge->fifo,DEAD)) {
+ /* The first test on unlocked FIFO */
+ if(canque_fifo_test_fl(&edge->fifo,EMPTY)) {
+ can_spin_lock(&edge->fifo.fifo_lock);
+ /* Test has to be repeated to ensure that EMPTY
+ state has not been nagated when locking FIFO */
+ if(canque_fifo_test_fl(&edge->fifo,EMPTY)) {
+ canque_fifo_set_fl(&edge->fifo,INACTIVE);
+ list_del(&edge->activepeers);
+ list_add(&edge->activepeers,&qends->idle);
+ can_spin_unlock(&edge->fifo.fifo_lock);
+ continue;
+ }
+ can_spin_unlock(&edge->fifo.fifo_lock);
+ }
+ canque_edge_incref(edge);
+ can_spin_unlock_irqrestore(&qends->ends_lock, flags);
+ *qedgep=edge;
+ DEBUGQUE("canque_test_outslot found edge %d\n",edge->edge_num);
+ ret=canque_fifo_test_outslot(&edge->fifo, slotp);
+ if(ret>=0)
+ return ret;
+
+ canque_edge_decref(edge);
+ can_spin_lock_irqsave(&qends->ends_lock, flags);
+ } else {
+ can_spin_lock(&edge->fifo.fifo_lock);
+ canque_fifo_set_fl(&edge->fifo,INACTIVE);
+ list_del(&edge->activepeers);
+ list_add(&edge->activepeers,&qends->idle);
+ can_spin_unlock(&edge->fifo.fifo_lock);
+ }
+ }
+ }
+ can_spin_unlock_irqrestore(&qends->ends_lock, flags);
+ *qedgep=NULL;
+ DEBUGQUE("canque_test_outslot no ready slot\n");
+ return -1;
+}
+
+/**
+ * canque_free_outslot - frees processed output slot
+ * @qends: ends structure belonging to calling communication object
+ * @qedge: edge slot belong to
+ * @slot: pointer to the processed slot
+ *
+ * Function releases processed slot previously acquired by canque_test_outslot()
+ * function call.
+ * Return Value: Return value informs if input side has been notified
+ * to know about change of edge state
+ */
+int canque_free_outslot(struct canque_ends_t *qends,
+ struct canque_edge_t *qedge, struct canque_slot_t *slot)
+{
+ int ret;
+ can_spin_irqflags_t flags;
+ ret=canque_fifo_free_outslot(&qedge->fifo, slot);
+ if(ret&CAN_FIFOF_EMPTY){
+ canque_notify_inends(qedge,CANQUEUE_NOTIFY_EMPTY);
+ }
+ if(ret&CAN_FIFOF_FULL)
+ canque_notify_inends(qedge,CANQUEUE_NOTIFY_SPACE);
+ can_spin_lock_irqsave(&qends->ends_lock, flags);
+ if((ret&CAN_FIFOF_EMPTY) || CANQUE_ROUNDROB ){
+ can_spin_lock(&qedge->fifo.fifo_lock);
+ if(canque_fifo_test_fl(&qedge->fifo,EMPTY)){
+ canque_fifo_set_fl(&qedge->fifo,INACTIVE);
+ list_del(&qedge->activepeers);
+ list_add(&qedge->activepeers,&qends->idle);
+ } else{
+ list_del(&qedge->activepeers);
+ list_add_tail(&qedge->activepeers,&qends->active[qedge->edge_prio]);
+ }
+ can_spin_unlock(&qedge->fifo.fifo_lock);
+ }
+ can_spin_unlock_irqrestore(&qends->ends_lock, flags);
+ canque_edge_decref(qedge);
+ DEBUGQUE("canque_free_outslot for edge %d returned %d\n",qedge->edge_num,ret);
+ return ret;
+}
+
+/**
+ * canque_again_outslot - reschedule output slot to process it again later
+ * @qends: ends structure belonging to calling communication object
+ * @qedge: edge slot belong to
+ * @slot: pointer to the slot for re-processing
+ *
+ * Function reschedules slot previously acquired by canque_test_outslot()
+ * function call for second time processing.
+ * Return Value: Function cannot fail.
+ */
+int canque_again_outslot(struct canque_ends_t *qends,
+ struct canque_edge_t *qedge, struct canque_slot_t *slot)
+{
+ int ret;
+ ret=canque_fifo_again_outslot(&qedge->fifo, slot);
+ canque_edge_decref(qedge);
+ DEBUGQUE("canque_again_outslot for edge %d returned %d\n",qedge->edge_num,ret);
+ return ret;
+}
+
+/**
+ * canque_set_filt - sets filter for specified edge
+ * @qedge: pointer to the edge
+ * @filtid: ID to set for the edge
+ * @filtmask: mask used for ID match check
+ * @filtflags: required filer flags
+ *
+ * Return Value: Negative value is returned if edge is in the process of delete.
+ */
+int canque_set_filt(struct canque_edge_t *qedge,
+ unsigned long filtid, unsigned long filtmask, int filtflags)
+{
+ int ret;
+ can_spin_irqflags_t flags;
+
+ can_spin_lock_irqsave(&qedge->fifo.fifo_lock,flags);
+
+ if(!(filtflags&MSG_PROCESSLOCAL) && (processlocal<2))
+ filtflags |= MSG_LOCAL_MASK;
+
+ qedge->filtid=canque_filtid2internal(filtid, filtflags);
+ qedge->filtmask=canque_filtid2internal(filtmask, filtflags>>MSG_FILT_MASK_SHIFT);
+
+ if(canque_fifo_test_fl(&qedge->fifo,DEAD)) ret=-1;
+ else ret=canque_fifo_test_and_set_fl(&qedge->fifo,BLOCK)?1:0;
+
+ can_spin_unlock_irqrestore(&qedge->fifo.fifo_lock,flags);
+ if(ret>=0){
+ canque_notify_bothends(qedge,CANQUEUE_NOTIFY_FILTCH);
+ }
+ can_spin_lock_irqsave(&qedge->fifo.fifo_lock,flags);
+ if(!ret) canque_fifo_clear_fl(&qedge->fifo,BLOCK);
+ can_spin_unlock_irqrestore(&qedge->fifo.fifo_lock,flags);
+
+ DEBUGQUE("canque_set_filt for edge %d, ID %ld, mask %ld, flags %d returned %d\n",
+ qedge->edge_num,filtid,filtmask,filtflags,ret);
+ return ret;
+}
+
+/**
+ * canque_flush - fluesh all ready slots in the edge
+ * @qedge: pointer to the edge
+ *
+ * Tries to flush all allocated slots from the edge, but there could
+ * exist some slots associated to edge which are processed by input
+ * or output side and cannot be flushed at this moment.
+ * Return Value: The nonzero value indicates, that queue has not been
+ * empty before the function call.
+ */
+int canque_flush(struct canque_edge_t *qedge)
+{
+ int ret;
+ can_spin_irqflags_t flags;
+
+ ret=canque_fifo_flush_slots(&qedge->fifo);
+ if(ret){
+ canque_notify_inends(qedge,CANQUEUE_NOTIFY_EMPTY);
+ canque_notify_inends(qedge,CANQUEUE_NOTIFY_SPACE);
+ can_spin_lock_irqsave(&qedge->outends->ends_lock, flags);
+ can_spin_lock(&qedge->fifo.fifo_lock);
+ if(canque_fifo_test_fl(&qedge->fifo,EMPTY)){
+ list_del(&qedge->activepeers);
+ list_add(&qedge->activepeers,&qedge->outends->idle);
+ }
+ can_spin_unlock(&qedge->fifo.fifo_lock);
+ can_spin_unlock_irqrestore(&qedge->outends->ends_lock, flags);
+ }
+ DEBUGQUE("canque_flush for edge %d returned %d\n",qedge->edge_num,ret);
+ return ret;
+}
+
+/**
+ * canqueue_ends_init_gen - subsystem independent routine to initialize ends state
+ * @qends: pointer to the ends structure
+ *
+ * Return Value: Cannot fail.
+ */
+int canqueue_ends_init_gen(struct canque_ends_t *qends)
+{
+ int i;
+ qends->ends_flags=0;
+ for(i=CANQUEUE_PRIO_NR;--i>=0;){
+ INIT_LIST_HEAD(&qends->active[i]);
+ }
+ INIT_LIST_HEAD(&qends->idle);
+ INIT_LIST_HEAD(&qends->inlist);
+ INIT_LIST_HEAD(&qends->outlist);
+ can_spin_lock_init(&qends->ends_lock);
+ return 0;
+}
+
+
+/**
+ * canqueue_connect_edge - connect edge between two communication entities
+ * @qedge: pointer to edge
+ * @inends: pointer to ends the input of the edge should be connected to
+ * @outends: pointer to ends the output of the edge should be connected to
+ *
+ * Return Value: Negative value informs about failed operation.
+ */
+int canqueue_connect_edge(struct canque_edge_t *qedge, struct canque_ends_t *inends, struct canque_ends_t *outends)
+{
+ can_spin_irqflags_t flags;
+ if(qedge == NULL) return -1;
+ DEBUGQUE("canqueue_connect_edge %d\n",qedge->edge_num);
+ canque_edge_incref(qedge);
+ flags=canque_edge_lock_both_ends(inends, outends);
+ can_spin_lock(&qedge->fifo.fifo_lock);
+ qedge->inends=inends;
+ list_add(&qedge->inpeers,&inends->inlist);
+ qedge->outends=outends;
+ list_add(&qedge->outpeers,&outends->outlist);
+ list_add(&qedge->activepeers,&outends->idle);
+ can_spin_unlock(&qedge->fifo.fifo_lock);
+ canque_edge_unlock_both_ends(inends, outends, flags);
+ canque_notify_bothends(qedge, CANQUEUE_NOTIFY_ATTACH);
+
+ if(canque_fifo_test_and_set_fl(&qedge->fifo, READY))
+ canque_edge_decref(qedge);
+ return 0;
+}
+
+/**
+ * canqueue_disconnect_edge - disconnect edge from communicating entities
+ * @qedge: pointer to edge
+ *
+ * Return Value: Negative value means, that edge is used by somebody
+ * other and cannot be disconnected. Operation has to be delayed.
+ */
+int canqueue_disconnect_edge(struct canque_edge_t *qedge)
+{
+ int ret;
+ can_spin_irqflags_t flags;
+ struct canque_ends_t *inends, *outends;
+
+ inends=qedge->inends;
+ outends=qedge->outends;
+
+ if(inends && outends) {
+ flags=canque_edge_lock_both_ends(inends, outends);
+ } else {
+ DEBUGQUE("canqueue_disconnect_edge called with not fully connected edge");
+ if(inends) can_spin_lock_irqsave(&inends->ends_lock,flags);
+ if(outends) can_spin_lock(&outends->ends_lock);
+ flags=0;
+ }
+
+ can_spin_lock(&qedge->fifo.fifo_lock);
+ if(atomic_read(&qedge->edge_used)==0) {
+ if(qedge->outends){
+ list_del(&qedge->activepeers);
+ mb(); /* memory barrier for list_empty use in canque_dead_func */
+ list_del(&qedge->outpeers);
+ qedge->outends=NULL;
+ }
+ if(qedge->inends){
+ list_del(&qedge->inpeers);
+ qedge->inends=NULL;
+ }
+ ret=1;
+ } else ret=-1;
+ can_spin_unlock(&qedge->fifo.fifo_lock);
+
+ if(inends && outends) {
+ canque_edge_unlock_both_ends(inends, outends, flags);
+ } else {
+ if(outends) can_spin_unlock(&outends->ends_lock);
+ if(inends) can_spin_unlock_irqrestore(&inends->ends_lock,flags);
+ }
+
+ DEBUGQUE("canqueue_disconnect_edge %d returned %d\n",qedge->edge_num,ret);
+ return ret;
+}
+
+
+/**
+ * canqueue_block_inlist - block slot allocation of all outgoing edges of specified ends
+ * @qends: pointer to ends structure
+ */
+void canqueue_block_inlist(struct canque_ends_t *qends)
+{
+ struct canque_edge_t *edge;
+
+ canque_for_each_inedge(qends, edge) {
+ canque_fifo_set_fl(&edge->fifo,BLOCK);
+ }
+}
+
+
+/**
+ * canqueue_block_outlist - block slot allocation of all incoming edges of specified ends
+ * @qends: pointer to ends structure
+ */
+void canqueue_block_outlist(struct canque_ends_t *qends)
+{
+ struct canque_edge_t *edge;
+
+ canque_for_each_outedge(qends, edge) {
+ canque_fifo_set_fl(&edge->fifo,BLOCK);
+ }
+}
+
+
+/**
+ * canqueue_ends_kill_inlist - sends request to die to all outgoing edges
+ * @qends: pointer to ends structure
+ * @send_rest: select, whether already allocated slots should be processed
+ * by FIFO output side
+ *
+ * Return Value: Non-zero value means, that not all edges could be immediately
+ * disconnected and that ends structure memory release has to be delayed
+ */
+int canqueue_ends_kill_inlist(struct canque_ends_t *qends, int send_rest)
+{
+ struct canque_edge_t *edge;
+
+ canque_for_each_inedge(qends, edge){
+ canque_notify_bothends(edge, CANQUEUE_NOTIFY_DEAD_WANTED);
+ if(send_rest){
+ canque_edge_incref(edge);
+ if(!canque_fifo_test_and_set_fl(&edge->fifo, FREEONEMPTY)){
+ if(!canque_fifo_test_fl(&edge->fifo, EMPTY))
+ continue;
+ if(!canque_fifo_test_and_clear_fl(&edge->fifo, FREEONEMPTY))
+ continue;
+ }
+ canque_edge_decref(edge);
+ }
+ }
+ return list_empty(&qends->inlist)?0:1;
+}
+
+
+/**
+ * canqueue_ends_kill_outlist - sends request to die to all incoming edges
+ * @qends: pointer to ends structure
+ *
+ * Return Value: Non-zero value means, that not all edges could be immediately
+ * disconnected and that ends structure memory release has to be delayed
+ */
+int canqueue_ends_kill_outlist(struct canque_ends_t *qends)
+{
+ struct canque_edge_t *edge;
+
+ canque_for_each_outedge(qends, edge){
+ canque_notify_bothends(edge, CANQUEUE_NOTIFY_DEAD_WANTED);
+ }
+ return list_empty(&qends->outlist)?0:1;
+}
+
+
+/**
+ * canqueue_ends_filt_conjuction - computes conjunction of incoming edges filters filters
+ * @qends: pointer to ends structure
+ * @filt: pointer the filter structure filled by computed filters conjunction
+ *
+ * Return Value: Number of incoming edges
+ */
+int canqueue_ends_filt_conjuction(struct canque_ends_t *qends, struct canfilt_t *filt)
+{
+ struct canque_edge_t *edge;
+ int cnt=0;
+ unsigned long filtid=0;
+ unsigned long filtmask=~0;
+ unsigned long local_only=canque_filtid2internal(0,MSG_LOCAL);
+
+ canque_for_each_inedge(qends, edge){
+ /* skip edges processing only local messages */
+ if(edge->filtid & edge->filtmask & local_only)
+ continue;
+
+ if(!cnt++)
+ filtid = edge->filtid;
+ else
+ filtmask &= ~(filtid ^ edge->filtid);
+
+ filtmask &= edge->filtmask;
+ }
+
+ filt->id = filtid & MSG_ID_MASK;
+ filt->mask = filtmask & MSG_ID_MASK;
+ filtid >>= 28;
+ filtmask >>= 28;
+ filt->flags = filtid & MSG_EXT;
+ if(filtmask & (MSG_EXT))
+ filt->flags |= MSG_EXT_MASK;
+ if(filtid & (MSG_RTR<<1))
+ filt->flags |= MSG_RTR<<1;
+ if(filtmask & (MSG_RTR<<1))
+ filt->flags |= MSG_RTR_MASK;
+ return cnt;
+}
+
+
+/**
+ * canqueue_ends_flush_inlist - flushes all messages in incoming edges
+ * @qends: pointer to ends structure
+ *
+ * Return Value: Negative value informs about unsuccessful result
+ */
+int canqueue_ends_flush_inlist(struct canque_ends_t *qends)
+{
+ struct canque_edge_t *edge;
+
+ canque_for_each_inedge(qends, edge){
+ canque_flush(edge);
+ }
+ return 0;
+}
+
+
+/**
+ * canqueue_ends_flush_outlist - flushes all messages in outgoing edges
+ * @qends: pointer to ends structure
+ *
+ * Return Value: Negative value informs about unsuccessful result
+ */
+int canqueue_ends_flush_outlist(struct canque_ends_t *qends)
+{
+ struct canque_edge_t *edge;
+
+ canque_for_each_outedge(qends, edge){
+ canque_flush(edge);
+ }
+ return 0;
+}
+
+
+
+
--- /dev/null
+/* devcommon.c - common device code
+ * Linux CAN-bus device driver.
+ * New CAN queues by Pavel Pisa - OCERA team member
+ * email:pisa@cmp.felk.cvut.cz
+ * This software is released under the GPL-License.
+ * Version lincan-0.3 17 Jun 2004
+ */
+
+#include "../include/can.h"
+#include "../include/can_sysdep.h"
+#include "../include/can_queue.h"
+#include "../include/main.h"
+#include "../include/devcommon.h"
+
+#ifdef CAN_WITH_RTL
+static inline
+void canqueue_wake_chip_worker(struct canque_ends_t *qends, struct canchip_t *chip, struct msgobj_t *obj)
+{
+ if(qends->endinfo.chipinfo.worker_thread){
+ can_msgobj_set_fl(obj,WORKER_WAKE);
+ pthread_kill(qends->endinfo.chipinfo.worker_thread,RTL_SIGNAL_WAKEUP);
+ rtl_schedule();
+ } else {
+ set_bit(MSGOBJ_TX_REQUEST_b,&chip->pend_flags);
+ if(chip->worker_thread) {
+ set_bit(MSGOBJ_WORKER_WAKE_b,&chip->pend_flags);
+ pthread_kill(chip->worker_thread,RTL_SIGNAL_WAKEUP);
+ rtl_schedule();
+ }
+ }
+}
+
+#endif /*CAN_WITH_RTL*/
+
+
+/**
+ * canqueue_notify_chip - notification callback handler for CAN chips ends of queues
+ * @qends: pointer to the callback side ends structure
+ * @qedge: edge which invoked notification
+ * @what: notification type
+ *
+ * This function has to deal with more possible cases. It can be called from
+ * the kernel or interrupt context for Linux only compilation of driver.
+ * The function can be called from kernel context or RT-Linux thread context
+ * for mixed mode Linux/RT-Linux compilation.
+ */
+void canqueue_notify_chip(struct canque_ends_t *qends, struct canque_edge_t *qedge, int what)
+{
+ struct canchip_t *chip=qends->endinfo.chipinfo.chip;
+ struct msgobj_t *obj=qends->endinfo.chipinfo.msgobj;
+
+ DEBUGMSG("canqueue_notify_chip for edge %d and event %d\n",qedge->edge_num,what);
+ switch(what){
+ /*case CANQUEUE_NOTIFY_EMPTY:*/
+ /*case CANQUEUE_NOTIFY_SPACE:*/
+ /*case CANQUEUE_NOTIFY_NOUSR:
+ wake_up(&qends->endinfo.chipinfo.daemonq);
+ break;*/
+ case CANQUEUE_NOTIFY_PROC:
+ #ifndef CAN_WITH_RTL
+ /*wake_up(&qends->endinfo.chipinfo.daemonq);*/
+ chip->chipspecops->wakeup_tx(chip, obj);
+ #else /*CAN_WITH_RTL*/
+ can_msgobj_set_fl(obj,TX_REQUEST);
+ canqueue_wake_chip_worker(qends, chip, obj);
+ #endif /*CAN_WITH_RTL*/
+ break;
+ case CANQUEUE_NOTIFY_DEAD_WANTED:
+ case CANQUEUE_NOTIFY_DEAD:
+ if(canque_fifo_test_and_clear_fl(&qedge->fifo, READY))
+ canque_edge_decref(qedge);
+ break;
+ case CANQUEUE_NOTIFY_ATTACH:
+ break;
+ case CANQUEUE_NOTIFY_FILTCH:
+ if(!chip->chipspecops->filtch_rq)
+ break;
+ #ifndef CAN_WITH_RTL
+ chip->chipspecops->filtch_rq(chip, obj);
+ #else /*CAN_WITH_RTL*/
+ can_msgobj_set_fl(obj,FILTCH_REQUEST);
+ canqueue_wake_chip_worker(qends, chip, obj);
+ #endif /*CAN_WITH_RTL*/
+
+ break;
+ }
+}
+
+
+/**
+ * canqueue_ends_init_chip - CAN chip specific ends initialization
+ * @qends: pointer to the ends structure
+ * @chip: pointer to the corresponding CAN chip structure
+ * @obj: pointer to the corresponding message object structure
+ */
+int canqueue_ends_init_chip(struct canque_ends_t *qends, struct canchip_t *chip, struct msgobj_t *obj)
+{
+ int ret;
+ ret=canqueue_ends_init_gen(qends);
+ if(ret<0) return ret;
+
+ qends->context=NULL;
+ #ifndef CAN_WITH_RTL
+ init_waitqueue_head(&qends->endinfo.chipinfo.daemonq);
+ #endif /*CAN_WITH_RTL*/
+ qends->endinfo.chipinfo.chip=chip;
+ qends->endinfo.chipinfo.msgobj=obj;
+ qends->notify=canqueue_notify_chip;
+
+ DEBUGMSG("canqueue_ends_init_chip\n");
+ return 0;
+}
+
+
+/**
+ * canqueue_ends_done_chip - finalizing of the ends structure for CAN chips
+ * @qends: pointer to ends structure
+ *
+ * Return Value: Function should be designed such way to not fail.
+ */
+int canqueue_ends_done_chip(struct canque_ends_t *qends)
+{
+ int delayed;
+
+ /* Finish or kill all outgoing edges listed in inends */
+ delayed=canqueue_ends_kill_inlist(qends, 1);
+ /* Kill all incoming edges listed in outends */
+ delayed|=canqueue_ends_kill_outlist(qends);
+
+ return delayed;
+}
--- /dev/null
+#include <stdio.h>
+#include <string.h>
+#include <cpu_def.h>
+#include <system_def.h>
+#include <lt_timer.h>
+#include <local_config.h>
+#include <usb/usbdebug.h>
+#include <usb/usb.h>
+#include <usb/lpc.h>
+#include <usb/usb_srq.h>
+#include <mem_loc.h>
+#include <keyval_id.h>
+#include <hal_machperiph.h>
+#include <keyval_loc.h>
+#include <lpciap.h>
+#include <lpciap_kvpb.h>
+
+#include "can/can.h"
+#include "can/sja1000p.h"
+
+#define MASK_EP1RX 0x01
+#define MASK_EP1TX 0x02
+
+#ifdef USB_MAX_PACKET
+ #undef USB_MAX_PACKET
+ #define USB_MAX_PACKET 8
+#endif
+
+#define CAN_OP_MASK 0x80
+#define CAN_OP_READ 0x80
+#define CAN_OP_WRITE 0x00
+
+
+LT_TIMER_DEC(lt_10msec)
+LT_TIMER_IMP(lt_10msec)
+LT_TIMER_DEC(lt_100msec)
+LT_TIMER_IMP(lt_100msec)
+LT_TIMER_DEC(lt_2sec)
+LT_TIMER_IMP(lt_2sec)
+
+typedef void (*FNC)(); //function ptr
+
+/***********************************/
+// global variables
+
+usb_device_t usb_device;
+
+usb_ep_t eps[2];
+unsigned char ep1_rx_buff[USB_MAX_PACKET];
+unsigned char ep1_tx_buff[USB_MAX_PACKET];
+uint8_t timer_str,timer_rx_off,timer_tx_off,timer_configured,usb_can_send;
+volatile uint8_t bootloader_run;
+
+int processlocal;
+
+/**
+ SOMETHING BAD HAPPENED
+*/
+int sys_err(){
+ unsigned char i=0;
+
+ while(1) {
+ if (lt_100msec_expired(100)) {
+ i++;
+ if (i&1) {
+ SET_OUT_PIN(LED_PORT,LED_ERR);
+ } else {
+ CLR_OUT_PIN(LED_PORT,LED_ERR);
+ }
+ #ifdef WATCHDOG_ENABLED
+ watchdog_feed();
+ #endif /* WATCHDOG_ENABLED */
+ }
+ }
+}
+
+/**
+ Routine for visible LED blinking
+*/
+void timer_10ms(void)
+{
+ if (timer_tx_off!=0) timer_tx_off--;
+ else SET_OUT_PIN(LED_PORT,LED1_BIT);
+ if (timer_rx_off!=0) timer_rx_off--;
+ else SET_OUT_PIN(LED_PORT,LED2_BIT);
+
+/* if (timer_configured!=0) timer_configured--;
+ else {
+ timer_configured=20;
+ CLR_OUT_PIN(LED_PORT,LED1_BIT);
+ CLR_OUT_PIN(LED_PORT,LED2_BIT);
+ timer_rx_off=timer_tx_off=5;
+ }*/
+}
+
+/***********************************/
+int main(void)
+{
+// volatile int i=0;
+ bootloader_run=0;
+ /***********************************/
+ lt_10msec_init();
+ lt_100msec_init();
+ lt_2sec_init();
+
+ SET_OUT_PIN(LED_PORT,LED_ERR);
+ CLR_OUT_PIN(LED_PORT,LED_GP);
+
+ //********************
+ // USB init
+ memset( &usb_device, 0, sizeof( usb_device));
+ usb_device.id = 1;
+ usb_device.init = usb_lpc_init;
+ usb_debug_set_level(DEBUG_LEVEL_NONE);
+ usb_device.cntep = 3;
+ usb_device.ep = eps;
+
+ eps[0].max_packet_size = USB_MAX_PACKET;
+ eps[1].max_packet_size = USB_MAX_PACKET;
+ eps[0].epnum = 0x01;
+ eps[1].epnum = 0x81;
+ eps[0].event_mask = 0x04;
+ eps[1].event_mask = 0x08;
+ eps[0].udev = &usb_device;
+ eps[1].udev = &usb_device;
+
+// usb_device.vendor_fnc=usb_loader;
+
+ usb_init(&usb_device);
+ usb_connect(&usb_device);
+
+ can_init();
+ usb_can_send=1;
+
+ /********************/
+ // start
+ timer_rx_off=timer_tx_off=timer_str=timer_configured=0;
+ while (1) {
+
+ usb_check_events(&usb_device);
+ usb_control_response(&usb_device);
+
+ if ((usb_device.ep_events & MASK_EP1RX)&&(usb_can_send)) { //EP1RX
+ int size;
+ uint8_t *data;
+ uint8_t val;
+ size=usb_udev_read_endpoint(&eps[0],ep1_rx_buff,USB_MAX_PACKET);
+ data=(uint8_t *)ep1_rx_buff;
+ if (size==2){
+ if (((*data)&CAN_OP_MASK)==CAN_OP_READ){ // Get data from CAN device and return to caller
+ can_read((*data) & 0x7F,&val);
+ *(data+1)=val;
+ usb_udev_write_endpoint(&eps[1],(unsigned char *)data,size);
+ timer_rx_off=50; //rosviceni diody pri prijmu
+ CLR_OUT_PIN(LED_PORT,LED2_BIT);
+ usb_can_send=0;
+ }
+ if (((*data)&CAN_OP_MASK)==CAN_OP_WRITE){ // Save data to CAN device
+ can_write((*data)&(~CAN_OP_MASK),data+1);
+ timer_tx_off=50; //rozsviceni diod pri vysilani
+ CLR_OUT_PIN(LED_PORT,LED1_BIT);
+ }
+ }
+ usb_device.ep_events &= ~MASK_EP1RX;
+ }
+
+ if(usb_device.ep_events & MASK_EP1TX){
+ usb_can_send=1;
+ usb_device.ep_events &= ~MASK_EP1TX;
+ }
+
+#ifdef WATCHDOG_ENABLED
+ watchdog_feed();
+#endif /* WATCHDOG_ENABLED */
+
+ /* 10ms timer */
+ if (lt_10msec_expired(10))
+ timer_10ms();
+ }
+
+ SET_OUT_PIN(LED_PORT,LED_GP);
+ SET_OUT_PIN(LED_PORT,LED_ERR);
+
+ /* unreachable code */
+#ifdef SDCC
+ vec_jmp(0x0); /* need to call a function from misc to correct linking */
+#endif
+ return 0;
+}
--- /dev/null
+/* sja1000.c
+ * Linux CAN-bus device driver.
+ * Written by Arnaud Westenberg email:arnaud@wanadoo.nl
+ * Changed for PeliCan mode SJA1000 by Tomasz Motylewski (BFAD GmbH)
+ * T.Motylewski@bfad.de
+ * Rewritten for new CAN queues by Pavel Pisa - OCERA team member
+ * email:pisa@cmp.felk.cvut.cz
+ * This software is released under the GPL-License.
+ * Version lincan-0.3 17 Jun 2004
+ */
+
+#include "../include/can.h"
+#include "../include/can_sysdep.h"
+#include "../include/main.h"
+#include "../include/sja1000p.h"
+
+#ifdef CONFIG_OC_LINCAN_DETAILED_ERRORS
+
+static const char *sja1000_ecc_errc_str[]={
+ "bit error",
+ "form error",
+ "stuff error",
+ "other type of error"
+};
+
+static const char *sja1000_ecc_seg_str[]={
+ "?0?",
+ "?1?",
+ "ID.28 to ID.21",
+ "start of frame",
+ "bit SRTR",
+ "bit IDE",
+ "ID.20 to ID.18",
+ "ID.17 to ID.13",
+ "CRC sequence",
+ "reserved bit 0",
+ "data field",
+ "data length code",
+ "bit RTR",
+ "reserved bit 1",
+ "ID.4 to ID.0",
+ "ID.12 to ID.5",
+ "?16?"
+ "active error flag",
+ "intermission",
+ "tolerate dominant bits",
+ "?20?",
+ "?21?",
+ "passive error flag",
+ "error delimiter",
+ "CRC delimiter",
+ "acknowledge slot",
+ "end of frame",
+ "acknowledge delimiter",
+ "overload flag",
+ "?29?",
+ "?30?",
+ "?31?"
+};
+
+#endif /*CONFIG_OC_LINCAN_DETAILED_ERRORS*/
+
+static int sja1000_report_error_limit_counter;
+
+static void sja1000_report_error(struct canchip_t *chip,
+ unsigned sr, unsigned ir, unsigned ecc)
+{
+ if(sja1000_report_error_limit_counter>=100)
+ return;
+
+ CANMSG("Error: status register: 0x%x irq_register: 0x%02x error: 0x%02x\n",
+ sr, ir, ecc);
+
+ sja1000_report_error_limit_counter+=10;
+
+ if(sja1000_report_error_limit_counter>=100){
+ sja1000_report_error_limit_counter+=10;
+ CANMSG("Error: too many errors, reporting disabled\n");
+ return;
+ }
+
+#ifdef CONFIG_OC_LINCAN_DETAILED_ERRORS
+ CANMSG("SR: BS=%c ES=%c TS=%c RS=%c TCS=%c TBS=%c DOS=%c RBS=%c\n",
+ sr&sjaSR_BS?'1':'0',sr&sjaSR_ES?'1':'0',
+ sr&sjaSR_TS?'1':'0',sr&sjaSR_RS?'1':'0',
+ sr&sjaSR_TCS?'1':'0',sr&sjaSR_TBS?'1':'0',
+ sr&sjaSR_DOS?'1':'0',sr&sjaSR_RBS?'1':'0');
+ CANMSG("IR: BEI=%c ALI=%c EPI=%c WUI=%c DOI=%c EI=%c TI=%c RI=%c\n",
+ sr&sjaIR_BEI?'1':'0',sr&sjaIR_ALI?'1':'0',
+ sr&sjaIR_EPI?'1':'0',sr&sjaIR_WUI?'1':'0',
+ sr&sjaIR_DOI?'1':'0',sr&sjaIR_EI?'1':'0',
+ sr&sjaIR_TI?'1':'0',sr&sjaIR_RI?'1':'0');
+ if((sr&sjaIR_EI) || 1){
+ CANMSG("EI: %s %s %s\n",
+ sja1000_ecc_errc_str[(ecc&(sjaECC_ERCC1|sjaECC_ERCC0))/sjaECC_ERCC0],
+ ecc&sjaECC_DIR?"RX":"TX",
+ sja1000_ecc_seg_str[ecc&sjaECC_SEG_M]
+ );
+ }
+#endif /*CONFIG_OC_LINCAN_DETAILED_ERRORS*/
+}
+
+
+/**
+ * sja1000p_enable_configuration - enable chip configuration mode
+ * @chip: pointer to chip state structure
+ */
+int sja1000p_enable_configuration(struct canchip_t *chip)
+{
+ int i=0;
+ enum sja1000_PeliCAN_MOD flags;
+
+ can_disable_irq(chip->chip_irq);
+
+ flags=can_read_reg(chip,SJAMOD);
+
+ while ((!(flags & sjaMOD_RM)) && (i<=10)) {
+ can_write_reg(chip, sjaMOD_RM, SJAMOD);
+// TODO: configurable sjaMOD_AFM (32/16 bit acceptance filter)
+// config sjaMOD_LOM (listen only)
+ udelay(100);
+ i++;
+ flags=can_read_reg(chip, SJAMOD);
+ }
+ if (i>=10) {
+ CANMSG("Reset error\n");
+ can_enable_irq(chip->chip_irq);
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+/**
+ * sja1000p_disable_configuration - disable chip configuration mode
+ * @chip: pointer to chip state structure
+ */
+int sja1000p_disable_configuration(struct canchip_t *chip)
+{
+ int i=0;
+ enum sja1000_PeliCAN_MOD flags;
+
+ flags=can_read_reg(chip,SJAMOD);
+
+ while ( (flags & sjaMOD_RM) && (i<=50) ) {
+// could be as long as 11*128 bit times after buss-off
+ can_write_reg(chip, 0, SJAMOD);
+// TODO: configurable sjaMOD_AFM (32/16 bit acceptance filter)
+// config sjaMOD_LOM (listen only)
+ udelay(100);
+ i++;
+ flags=can_read_reg(chip, SJAMOD);
+ }
+ if (i>=10) {
+ CANMSG("Error leaving reset status\n");
+ return -ENODEV;
+ }
+
+ can_enable_irq(chip->chip_irq);
+
+ return 0;
+}
+
+/**
+ * sja1000p_chip_config: - can chip configuration
+ * @chip: pointer to chip state structure
+ *
+ * This function configures chip and prepares it for message
+ * transmission and reception. The function resets chip,
+ * resets mask for acceptance of all messages by call to
+ * sja1000p_extended_mask() function and then
+ * computes and sets baudrate with use of function sja1000p_baud_rate().
+ * Return Value: negative value reports error.
+ * File: src/sja1000p.c
+ */
+int sja1000p_chip_config(struct canchip_t *chip)
+{
+ int i;
+ unsigned char n, r;
+
+ if (sja1000p_enable_configuration(chip))
+ return -ENODEV;
+
+ /* Set mode, clock out, comparator */
+ can_write_reg(chip,sjaCDR_PELICAN|chip->sja_cdr_reg,SJACDR);
+
+ /* Ensure, that interrupts are disabled even on the chip level now */
+ can_write_reg(chip, sjaDISABLE_INTERRUPTS, SJAIER);
+
+ /* Set driver output configuration */
+ can_write_reg(chip,chip->sja_ocr_reg,SJAOCR);
+
+ /* Simple check for chip presence */
+ for (i=0, n=0x5a; i<8; i++, n+=0xf) {
+ can_write_reg(chip,n,SJAACR0+i);
+ }
+ for (i=0, n=0x5a; i<8; i++, n+=0xf) {
+ r = n^can_read_reg(chip,SJAACR0+i);
+ if (r) {
+ CANMSG("sja1000p_chip_config: chip connection broken,"
+ " readback differ 0x%02x\n", r);
+ return -ENODEV;
+ }
+ }
+
+
+ if (sja1000p_extended_mask(chip,0x00000000, 0xffffffff))
+ return -ENODEV;
+
+ if (!chip->baudrate)
+ chip->baudrate=1000000;
+ if (sja1000p_baud_rate(chip,chip->baudrate,chip->clock,0,75,0))
+ return -ENODEV;
+
+ /* Enable hardware interrupts */
+ can_write_reg(chip, sjaENABLE_INTERRUPTS, SJAIER);
+
+ sja1000p_disable_configuration(chip);
+
+ return 0;
+}
+
+/**
+ * sja1000p_extended_mask: - setup of extended mask for message filtering
+ * @chip: pointer to chip state structure
+ * @code: can message acceptance code
+ * @mask: can message acceptance mask
+ *
+ * Return Value: negative value reports error.
+ * File: src/sja1000p.c
+ */
+int sja1000p_extended_mask(struct canchip_t *chip, unsigned long code, unsigned long mask)
+{
+ int i;
+
+ if (sja1000p_enable_configuration(chip))
+ return -ENODEV;
+
+// LSB to +3, MSB to +0
+ for(i=SJA_PeliCAN_AC_LEN; --i>=0;) {
+ can_write_reg(chip,code&0xff,SJAACR0+i);
+ can_write_reg(chip,mask&0xff,SJAAMR0+i);
+ code >>= 8;
+ mask >>= 8;
+ }
+
+ DEBUGMSG("Setting acceptance code to 0x%lx\n",(unsigned long)code);
+ DEBUGMSG("Setting acceptance mask to 0x%lx\n",(unsigned long)mask);
+
+ sja1000p_disable_configuration(chip);
+
+ return 0;
+}
+
+/**
+ * sja1000p_baud_rate: - set communication parameters.
+ * @chip: pointer to chip state structure
+ * @rate: baud rate in Hz
+ * @clock: frequency of sja1000 clock in Hz (ISA osc is 14318000)
+ * @sjw: synchronization jump width (0-3) prescaled clock cycles
+ * @sampl_pt: sample point in % (0-100) sets (TSEG1+1)/(TSEG1+TSEG2+2) ratio
+ * @flags: fields %BTR1_SAM, %OCMODE, %OCPOL, %OCTP, %OCTN, %CLK_OFF, %CBP
+ *
+ * Return Value: negative value reports error.
+ * File: src/sja1000p.c
+ */
+int sja1000p_baud_rate(struct canchip_t *chip, int rate, int clock, int sjw,
+ int sampl_pt, int flags)
+{
+ int best_error = 1000000000, error;
+ int best_tseg=0, best_brp=0, best_rate=0, brp=0;
+ int tseg=0, tseg1=0, tseg2=0;
+
+ if (sja1000p_enable_configuration(chip))
+ return -ENODEV;
+
+ clock /=2;
+
+ /* tseg even = round down, odd = round up */
+ for (tseg=(0+0+2)*2; tseg<=(sjaMAX_TSEG2+sjaMAX_TSEG1+2)*2+1; tseg++) {
+ brp = clock/((1+tseg/2)*rate)+tseg%2;
+ if (brp == 0 || brp > 64)
+ continue;
+ error = rate - clock/(brp*(1+tseg/2));
+ if (error < 0)
+ error = -error;
+ if (error <= best_error) {
+ best_error = error;
+ best_tseg = tseg/2;
+ best_brp = brp-1;
+ best_rate = clock/(brp*(1+tseg/2));
+ }
+ }
+ if (best_error && (rate/best_error < 10)) {
+ CANMSG("baud rate %d is not possible with %d Hz clock\n",
+ rate, 2*clock);
+ CANMSG("%d bps. brp=%d, best_tseg=%d, tseg1=%d, tseg2=%d\n",
+ best_rate, best_brp, best_tseg, tseg1, tseg2);
+ return -EINVAL;
+ }
+ tseg2 = best_tseg-(sampl_pt*(best_tseg+1))/100;
+ if (tseg2 < 0)
+ tseg2 = 0;
+ if (tseg2 > sjaMAX_TSEG2)
+ tseg2 = sjaMAX_TSEG2;
+ tseg1 = best_tseg-tseg2-2;
+ if (tseg1>sjaMAX_TSEG1) {
+ tseg1 = sjaMAX_TSEG1;
+ tseg2 = best_tseg-tseg1-2;
+ }
+
+ DEBUGMSG("Setting %d bps.\n", best_rate);
+ DEBUGMSG("brp=%d, best_tseg=%d, tseg1=%d, tseg2=%d, sampl_pt=%d\n",
+ best_brp, best_tseg, tseg1, tseg2,
+ (100*(best_tseg-tseg2)/(best_tseg+1)));
+
+
+ can_write_reg(chip, sjw<<6 | best_brp, SJABTR0);
+ can_write_reg(chip, ((flags & BTR1_SAM) != 0)<<7 | (tseg2<<4)
+ | tseg1, SJABTR1);
+
+ sja1000p_disable_configuration(chip);
+
+ return 0;
+}
+
+/**
+ * sja1000p_read: - reads and distributes one or more received messages
+ * @chip: pointer to chip state structure
+ * @obj: pinter to CAN message queue information
+ *
+ * File: src/sja1000p.c
+ */
+void sja1000p_read(struct canchip_t *chip, struct msgobj_t *obj) {
+ int i, flags, len, datastart;
+ do {
+ flags = can_read_reg(chip,SJAFRM);
+ if(flags&sjaFRM_FF) {
+ obj->rx_msg.id =
+ (can_read_reg(chip,SJAID0)<<21) +
+ (can_read_reg(chip,SJAID1)<<13) +
+ (can_read_reg(chip,SJAID2)<<5) +
+ (can_read_reg(chip,SJAID3)>>3);
+ datastart = SJADATE;
+ } else {
+ obj->rx_msg.id =
+ (can_read_reg(chip,SJAID0)<<3) +
+ (can_read_reg(chip,SJAID1)>>5);
+ datastart = SJADATS;
+ }
+ obj->rx_msg.flags =
+ ((flags & sjaFRM_RTR) ? MSG_RTR : 0) |
+ ((flags & sjaFRM_FF) ? MSG_EXT : 0);
+ len = flags & sjaFRM_DLC_M;
+ obj->rx_msg.length = len;
+ if(len > CAN_MSG_LENGTH) len = CAN_MSG_LENGTH;
+ for(i=0; i< len; i++) {
+ obj->rx_msg.data[i]=can_read_reg(chip,datastart+i);
+ }
+
+ /* fill CAN message timestamp */
+ can_filltimestamp(&obj->rx_msg.timestamp);
+
+ canque_filter_msg2edges(obj->qends, &obj->rx_msg);
+
+ can_write_reg(chip, sjaCMR_RRB, SJACMR);
+
+ } while (can_read_reg(chip, SJASR) & sjaSR_RBS);
+}
+
+/**
+ * sja1000p_pre_read_config: - prepares message object for message reception
+ * @chip: pointer to chip state structure
+ * @obj: pointer to message object state structure
+ *
+ * Return Value: negative value reports error.
+ * Positive value indicates immediate reception of message.
+ * File: src/sja1000p.c
+ */
+int sja1000p_pre_read_config(struct canchip_t *chip, struct msgobj_t *obj)
+{
+ int status;
+ status=can_read_reg(chip,SJASR);
+
+ if(status & sjaSR_BS) {
+ /* Try to recover from error condition */
+ DEBUGMSG("sja1000p_pre_read_config bus-off recover 0x%x\n",status);
+ sja1000p_enable_configuration(chip);
+ can_write_reg(chip, 0, SJARXERR);
+ can_write_reg(chip, 0, SJATXERR1);
+ can_read_reg(chip, SJAECC);
+ sja1000p_disable_configuration(chip);
+ }
+
+ if (!(status&sjaSR_RBS)) {
+ return 0;
+ }
+
+ can_write_reg(chip, sjaDISABLE_INTERRUPTS, SJAIER); //disable interrupts for a moment
+ sja1000p_read(chip, obj);
+ can_write_reg(chip, sjaENABLE_INTERRUPTS, SJAIER); //enable interrupts
+ return 1;
+}
+
+#define MAX_TRANSMIT_WAIT_LOOPS 10
+/**
+ * sja1000p_pre_write_config: - prepares message object for message transmission
+ * @chip: pointer to chip state structure
+ * @obj: pointer to message object state structure
+ * @msg: pointer to CAN message
+ *
+ * This function prepares selected message object for future initiation
+ * of message transmission by sja1000p_send_msg() function.
+ * The CAN message data and message ID are transfered from @msg slot
+ * into chip buffer in this function.
+ * Return Value: negative value reports error.
+ * File: src/sja1000p.c
+ */
+int sja1000p_pre_write_config(struct canchip_t *chip, struct msgobj_t *obj,
+ struct canmsg_t *msg)
+{
+ int i=0;
+ unsigned int id;
+ int status;
+ int len;
+
+ /* Wait until Transmit Buffer Status is released */
+ while ( !((status=can_read_reg(chip, SJASR)) & sjaSR_TBS) &&
+ i++<MAX_TRANSMIT_WAIT_LOOPS) {
+ udelay(i);
+ }
+
+ if(status & sjaSR_BS) {
+ /* Try to recover from error condition */
+ DEBUGMSG("sja1000p_pre_write_config bus-off recover 0x%x\n",status);
+ sja1000p_enable_configuration(chip);
+ can_write_reg(chip, 0, SJARXERR);
+ can_write_reg(chip, 0, SJATXERR1);
+ can_read_reg(chip, SJAECC);
+ sja1000p_disable_configuration(chip);
+ }
+ if (!(can_read_reg(chip, SJASR) & sjaSR_TBS)) {
+ CANMSG("Transmit timed out, cancelling\n");
+// here we should check if there is no write/select waiting for this
+// transmit. If so, set error ret and wake up.
+// CHECKME: if we do not disable sjaIER_TIE (TX IRQ) here we get interrupt
+// immediately
+ can_write_reg(chip, sjaCMR_AT, SJACMR);
+ i=0;
+ while ( !(can_read_reg(chip, SJASR) & sjaSR_TBS) &&
+ i++<MAX_TRANSMIT_WAIT_LOOPS) {
+ udelay(i);
+ }
+ if (!(can_read_reg(chip, SJASR) & sjaSR_TBS)) {
+ CANMSG("Could not cancel, please reset\n");
+ return -EIO;
+ }
+ }
+ len = msg->length;
+ if(len > CAN_MSG_LENGTH) len = CAN_MSG_LENGTH;
+ /* len &= sjaFRM_DLC_M; ensured by above condition already */
+ can_write_reg(chip, ((msg->flags&MSG_EXT)?sjaFRM_FF:0) |
+ ((msg->flags & MSG_RTR) ? sjaFRM_RTR : 0) | len, SJAFRM);
+ if(msg->flags&MSG_EXT) {
+ id=msg->id<<3;
+ can_write_reg(chip, id & 0xff, SJAID3);
+ id >>= 8;
+ can_write_reg(chip, id & 0xff, SJAID2);
+ id >>= 8;
+ can_write_reg(chip, id & 0xff, SJAID1);
+ id >>= 8;
+ can_write_reg(chip, id, SJAID0);
+ for(i=0; i < len; i++) {
+ can_write_reg(chip, msg->data[i], SJADATE+i);
+ }
+ } else {
+ id=msg->id<<5;
+ can_write_reg(chip, (id >> 8) & 0xff, SJAID0);
+ can_write_reg(chip, id & 0xff, SJAID1);
+ for(i=0; i < len; i++) {
+ can_write_reg(chip, msg->data[i], SJADATS+i);
+ }
+ }
+ return 0;
+}
+
+/**
+ * sja1000p_send_msg: - initiate message transmission
+ * @chip: pointer to chip state structure
+ * @obj: pointer to message object state structure
+ * @msg: pointer to CAN message
+ *
+ * This function is called after sja1000p_pre_write_config() function,
+ * which prepares data in chip buffer.
+ * Return Value: negative value reports error.
+ * File: src/sja1000p.c
+ */
+int sja1000p_send_msg(struct canchip_t *chip, struct msgobj_t *obj,
+ struct canmsg_t *msg)
+{
+ can_write_reg(chip, sjaCMR_TR, SJACMR);
+
+ return 0;
+}
+
+/**
+ * sja1000p_check_tx_stat: - checks state of transmission engine
+ * @chip: pointer to chip state structure
+ *
+ * Return Value: negative value reports error.
+ * Positive return value indicates transmission under way status.
+ * Zero value indicates finishing of all issued transmission requests.
+ * File: src/sja1000p.c
+ */
+int sja1000p_check_tx_stat(struct canchip_t *chip)
+{
+ if (can_read_reg(chip,SJASR) & sjaSR_TCS)
+ return 0;
+ else
+ return 1;
+}
+
+/**
+ * sja1000p_set_btregs: - configures bitrate registers
+ * @chip: pointer to chip state structure
+ * @btr0: bitrate register 0
+ * @btr1: bitrate register 1
+ *
+ * Return Value: negative value reports error.
+ * File: src/sja1000p.c
+ */
+int sja1000p_set_btregs(struct canchip_t *chip, unsigned short btr0,
+ unsigned short btr1)
+{
+ if (sja1000p_enable_configuration(chip))
+ return -ENODEV;
+
+ can_write_reg(chip, btr0, SJABTR0);
+ can_write_reg(chip, btr1, SJABTR1);
+
+ sja1000p_disable_configuration(chip);
+
+ return 0;
+}
+
+/**
+ * sja1000p_start_chip: - starts chip message processing
+ * @chip: pointer to chip state structure
+ *
+ * Return Value: negative value reports error.
+ * File: src/sja1000p.c
+ */
+int sja1000p_start_chip(struct canchip_t *chip)
+{
+ enum sja1000_PeliCAN_MOD flags;
+
+ flags = can_read_reg(chip, SJAMOD) & (sjaMOD_LOM|sjaMOD_STM|sjaMOD_AFM|sjaMOD_SM);
+ can_write_reg(chip, flags, SJAMOD);
+
+ sja1000_report_error_limit_counter=0;
+
+ return 0;
+}
+
+/**
+ * sja1000p_stop_chip: - stops chip message processing
+ * @chip: pointer to chip state structure
+ *
+ * Return Value: negative value reports error.
+ * File: src/sja1000p.c
+ */
+int sja1000p_stop_chip(struct canchip_t *chip)
+{
+ enum sja1000_PeliCAN_MOD flags;
+
+ flags = can_read_reg(chip, SJAMOD) & (sjaMOD_LOM|sjaMOD_STM|sjaMOD_AFM|sjaMOD_SM);
+ can_write_reg(chip, flags|sjaMOD_RM, SJAMOD);
+
+ return 0;
+}
+
+/**
+ * sja1000p_attach_to_chip: - attaches to the chip, setups registers and state
+ * @chip: pointer to chip state structure
+ *
+ * Return Value: negative value reports error.
+ * File: src/sja1000p.c
+ */
+int sja1000p_attach_to_chip(struct canchip_t *chip)
+{
+ return 0;
+}
+
+/**
+ * sja1000p_release_chip: - called before chip structure removal if %CHIP_ATTACHED is set
+ * @chip: pointer to chip state structure
+ *
+ * Return Value: negative value reports error.
+ * File: src/sja1000p.c
+ */
+int sja1000p_release_chip(struct canchip_t *chip)
+{
+ sja1000p_stop_chip(chip);
+ can_write_reg(chip, sjaDISABLE_INTERRUPTS, SJAIER);
+
+ return 0;
+}
+
+/**
+ * sja1000p_remote_request: - configures message object and asks for RTR message
+ * @chip: pointer to chip state structure
+ * @obj: pointer to message object structure
+ *
+ * Return Value: negative value reports error.
+ * File: src/sja1000p.c
+ */
+int sja1000p_remote_request(struct canchip_t *chip, struct msgobj_t *obj)
+{
+ CANMSG("sja1000p_remote_request not implemented\n");
+ return -ENOSYS;
+}
+
+/**
+ * sja1000p_standard_mask: - setup of mask for message filtering
+ * @chip: pointer to chip state structure
+ * @code: can message acceptance code
+ * @mask: can message acceptance mask
+ *
+ * Return Value: negative value reports error.
+ * File: src/sja1000p.c
+ */
+int sja1000p_standard_mask(struct canchip_t *chip, unsigned short code,
+ unsigned short mask)
+{
+ CANMSG("sja1000p_standard_mask not implemented\n");
+ return -ENOSYS;
+}
+
+/**
+ * sja1000p_clear_objects: - clears state of all message object residing in chip
+ * @chip: pointer to chip state structure
+ *
+ * Return Value: negative value reports error.
+ * File: src/sja1000p.c
+ */
+int sja1000p_clear_objects(struct canchip_t *chip)
+{
+ CANMSG("sja1000p_clear_objects not implemented\n");
+ return -ENOSYS;
+}
+
+/**
+ * sja1000p_config_irqs: - tunes chip hardware interrupt delivery
+ * @chip: pointer to chip state structure
+ * @irqs: requested chip IRQ configuration
+ *
+ * Return Value: negative value reports error.
+ * File: src/sja1000p.c
+ */
+int sja1000p_config_irqs(struct canchip_t *chip, short irqs)
+{
+ CANMSG("sja1000p_config_irqs not implemented\n");
+ return -ENOSYS;
+}
+
+/**
+ * sja1000p_irq_write_handler: - part of ISR code responsible for transmit events
+ * @chip: pointer to chip state structure
+ * @obj: pointer to attached queue description
+ *
+ * The main purpose of this function is to read message from attached queues
+ * and transfer message contents into CAN controller chip.
+ * This subroutine is called by
+ * sja1000p_irq_write_handler() for transmit events.
+ * File: src/sja1000p.c
+ */
+void sja1000p_irq_write_handler(struct canchip_t *chip, struct msgobj_t *obj)
+{
+ int cmd;
+
+ if(obj->tx_slot){
+ /* Do local transmitted message distribution if enabled */
+ if (processlocal){
+ /* fill CAN message timestamp */
+ can_filltimestamp(&obj->tx_slot->msg.timestamp);
+
+ obj->tx_slot->msg.flags |= MSG_LOCAL;
+ canque_filter_msg2edges(obj->qends, &obj->tx_slot->msg);
+ }
+ /* Free transmitted slot */
+ canque_free_outslot(obj->qends, obj->tx_qedge, obj->tx_slot);
+ obj->tx_slot=NULL;
+ }
+
+ can_msgobj_clear_fl(obj,TX_PENDING);
+ cmd=canque_test_outslot(obj->qends, &obj->tx_qedge, &obj->tx_slot);
+ if(cmd<0)
+ return;
+ can_msgobj_set_fl(obj,TX_PENDING);
+
+ if (chip->chipspecops->pre_write_config(chip, obj, &obj->tx_slot->msg)) {
+ obj->ret = -1;
+ canque_notify_inends(obj->tx_qedge, CANQUEUE_NOTIFY_ERRTX_PREP);
+ canque_free_outslot(obj->qends, obj->tx_qedge, obj->tx_slot);
+ obj->tx_slot=NULL;
+ return;
+ }
+ if (chip->chipspecops->send_msg(chip, obj, &obj->tx_slot->msg)) {
+ obj->ret = -1;
+ canque_notify_inends(obj->tx_qedge, CANQUEUE_NOTIFY_ERRTX_SEND);
+ canque_free_outslot(obj->qends, obj->tx_qedge, obj->tx_slot);
+ obj->tx_slot=NULL;
+ return;
+ }
+
+}
+
+#define MAX_RETR 10
+
+/**
+ * sja1000p_irq_handler: - interrupt service routine
+ * @irq: interrupt vector number, this value is system specific
+ * @chip: pointer to chip state structure
+ *
+ * Interrupt handler is activated when state of CAN controller chip changes,
+ * there is message to be read or there is more space for new messages or
+ * error occurs. The receive events results in reading of the message from
+ * CAN controller chip and distribution of message through attached
+ * message queues.
+ * File: src/sja1000p.c
+ */
+int sja1000p_irq_handler(int irq, struct canchip_t *chip)
+{
+ int irq_register, status, error_code;
+ struct msgobj_t *obj=chip->msgobj[0];
+ int loop_cnt=CHIP_MAX_IRQLOOP;
+
+ irq_register=can_read_reg(chip,SJAIR);
+// DEBUGMSG("sja1000_irq_handler: SJAIR:%02x\n",irq_register);
+// DEBUGMSG("sja1000_irq_handler: SJASR:%02x\n",
+// can_read_reg(chip,SJASR));
+
+ if ((irq_register & (sjaIR_BEI|sjaIR_EPI|sjaIR_DOI|sjaIR_EI|sjaIR_TI|sjaIR_RI)) == 0)
+ return CANCHIP_IRQ_NONE;
+
+ if(!(chip->flags&CHIP_CONFIGURED)) {
+ CANMSG("sja1000p_irq_handler: called for non-configured device, irq_register 0x%02x\n", irq_register);
+ return CANCHIP_IRQ_NONE;
+ }
+
+ status=can_read_reg(chip,SJASR);
+
+ do {
+
+ if(!loop_cnt--) {
+ CANMSG("sja1000p_irq_handler IRQ %d stuck\n",irq);
+ return CANCHIP_IRQ_STUCK;
+ }
+
+ /* (irq_register & sjaIR_RI) */
+ /* old variant using SJAIR, collides with intended use with irq_accept */
+ if (status & sjaSR_RBS) {
+ DEBUGMSG("sja1000_irq_handler: RI or RBS\n");
+ sja1000p_read(chip,obj);
+ obj->ret = 0;
+ }
+
+ /* (irq_register & sjaIR_TI) */
+ /* old variant using SJAIR, collides with intended use with irq_accept */
+ if (((status & sjaSR_TBS) && can_msgobj_test_fl(obj,TX_PENDING))||
+ (can_msgobj_test_fl(obj,TX_REQUEST))) {
+ DEBUGMSG("sja1000_irq_handler: TI or TX_PENDING and TBS\n");
+ obj->ret = 0;
+ can_msgobj_set_fl(obj,TX_REQUEST);
+ while(!can_msgobj_test_and_set_fl(obj,TX_LOCK)){
+ can_msgobj_clear_fl(obj,TX_REQUEST);
+
+ if (can_read_reg(chip, SJASR) & sjaSR_TBS)
+ sja1000p_irq_write_handler(chip, obj);
+
+ can_msgobj_clear_fl(obj,TX_LOCK);
+ if(!can_msgobj_test_fl(obj,TX_REQUEST)) break;
+ DEBUGMSG("TX looping in sja1000_irq_handler\n");
+ }
+ }
+ if ((irq_register & (sjaIR_EI|sjaIR_BEI|sjaIR_EPI|sjaIR_DOI)) != 0) {
+ // Some error happened
+ error_code=can_read_reg(chip,SJAECC);
+ sja1000_report_error(chip, status, irq_register, error_code);
+// FIXME: chip should be brought to usable state. Transmission cancelled if in progress.
+// Reset flag set to 0 if chip is already off the bus. Full state report
+ obj->ret=-1;
+
+ if(error_code == 0xd9) {
+ obj->ret= -ENXIO;
+ /* no such device or address - no ACK received */
+ }
+ if(obj->tx_retry_cnt++>MAX_RETR) {
+ can_write_reg(chip, sjaCMR_AT, SJACMR); // cancel any transmition
+ obj->tx_retry_cnt = 0;
+ }
+ if(status&sjaSR_BS) {
+ CANMSG("bus-off, resetting sja1000p\n");
+ can_write_reg(chip, 0, SJAMOD);
+ }
+
+ if(obj->tx_slot){
+ canque_notify_inends(obj->tx_qedge, CANQUEUE_NOTIFY_ERRTX_BUS);
+ /*canque_free_outslot(obj->qends, obj->tx_qedge, obj->tx_slot);
+ obj->tx_slot=NULL;*/
+ }
+
+ } else {
+ if(sja1000_report_error_limit_counter)
+ sja1000_report_error_limit_counter--;
+ obj->tx_retry_cnt=0;
+ }
+
+ irq_register=can_read_reg(chip,SJAIR);
+
+ status=can_read_reg(chip,SJASR);
+
+ if(((status & sjaSR_TBS) && can_msgobj_test_fl(obj,TX_PENDING)) ||
+ (irq_register & sjaIR_TI))
+ can_msgobj_set_fl(obj,TX_REQUEST);
+
+ } while((irq_register & (sjaIR_BEI|sjaIR_EPI|sjaIR_DOI|sjaIR_EI|sjaIR_RI)) ||
+ (can_msgobj_test_fl(obj,TX_REQUEST) && !can_msgobj_test_fl(obj,TX_LOCK)) ||
+ (status & sjaSR_RBS));
+
+ return CANCHIP_IRQ_HANDLED;
+}
+
+/**
+ * sja1000p_wakeup_tx: - wakeups TX processing
+ * @chip: pointer to chip state structure
+ * @obj: pointer to message object structure
+ *
+ * Function is responsible for initiating message transmition.
+ * It is responsible for clearing of object TX_REQUEST flag
+ *
+ * Return Value: negative value reports error.
+ * File: src/sja1000p.c
+ */
+int sja1000p_wakeup_tx(struct canchip_t *chip, struct msgobj_t *obj)
+{
+
+ can_preempt_disable();
+
+ can_msgobj_set_fl(obj,TX_PENDING);
+ can_msgobj_set_fl(obj,TX_REQUEST);
+ while(!can_msgobj_test_and_set_fl(obj,TX_LOCK)){
+ can_msgobj_clear_fl(obj,TX_REQUEST);
+
+ if (can_read_reg(chip, SJASR) & sjaSR_TBS){
+ obj->tx_retry_cnt=0;
+ sja1000p_irq_write_handler(chip, obj);
+ }
+
+ can_msgobj_clear_fl(obj,TX_LOCK);
+ if(!can_msgobj_test_fl(obj,TX_REQUEST)) break;
+ DEBUGMSG("TX looping in sja1000p_wakeup_tx\n");
+ }
+
+ can_preempt_enable();
+ return 0;
+}
+
+int sja1000p_register(struct chipspecops_t *chipspecops)
+{
+ CANMSG("initializing sja1000p chip operations\n");
+ chipspecops->chip_config=sja1000p_chip_config;
+ chipspecops->baud_rate=sja1000p_baud_rate;
+ chipspecops->standard_mask=sja1000p_standard_mask;
+ chipspecops->extended_mask=sja1000p_extended_mask;
+ chipspecops->message15_mask=sja1000p_extended_mask;
+ chipspecops->clear_objects=sja1000p_clear_objects;
+ chipspecops->config_irqs=sja1000p_config_irqs;
+ chipspecops->pre_read_config=sja1000p_pre_read_config;
+ chipspecops->pre_write_config=sja1000p_pre_write_config;
+ chipspecops->send_msg=sja1000p_send_msg;
+ chipspecops->check_tx_stat=sja1000p_check_tx_stat;
+ chipspecops->wakeup_tx=sja1000p_wakeup_tx;
+ chipspecops->remote_request=sja1000p_remote_request;
+ chipspecops->enable_configuration=sja1000p_enable_configuration;
+ chipspecops->disable_configuration=sja1000p_disable_configuration;
+ chipspecops->attach_to_chip=sja1000p_attach_to_chip;
+ chipspecops->release_chip=sja1000p_release_chip;
+ chipspecops->set_btregs=sja1000p_set_btregs;
+ chipspecops->start_chip=sja1000p_start_chip;
+ chipspecops->stop_chip=sja1000p_stop_chip;
+ chipspecops->irq_handler=sja1000p_irq_handler;
+ chipspecops->irq_accept=NULL;
+ return 0;
+}
+
+/**
+ * sja1000p_fill_chipspecops - fills chip specific operations
+ * @chip: pointer to chip representation structure
+ *
+ * The function fills chip specific operations for sja1000 (PeliCAN) chip.
+ *
+ * Return Value: returns negative number in the case of fail
+ */
+int sja1000p_fill_chipspecops(struct canchip_t *chip)
+{
+ chip->chip_type="sja1000p";
+ chip->max_objects=1;
+ sja1000p_register(chip->chipspecops);
+ return 0;
+}
--- /dev/null
+
+#ifndef USB_DEFS_MODULE
+ #define USB_DEFS_MODULE
+
+ #include <usb/usb_spec.h>
+// #include <usb/pdiusb.h>
+ #include <usb/lpcusb.h>
+ #include <endian.h>
+ #include <cpu_def.h>
+
+ #include <endian.h>
+ #if __BYTE_ORDER == __BIG_ENDIAN
+ #include <byteswap.h>
+ #define SWAP(x) ((((x) & 0xFF) << 8) | (((x) >> 8) & 0xFF))
+ #else /*__LITTLE_ENDIAN*/
+ #define SWAP(x) (x)
+ #endif
+
+ #ifndef CODE
+ #define CODE
+ #endif
+
+/*****************************************************/
+/*** Static data structures for device descriptors ***/
+/*****************************************************/
+#ifndef USB_VENDOR_ID
+ #define USB_VENDOR_ID 0xDEAD /* vymyslene cislo ( snad ho nikdo nema ... ;-) */
+#endif
+#ifndef USB_PRODUCT_ID
+ #define USB_PRODUCT_ID 0x1001 /* test code for ULAD21 */
+#endif
+ #define USB_RELEASE_VER 0x0010
+
+/*** Class codes for device description ***/
+ #define USB_CLASS_CODE 0xFF
+ #define USB_SUBCLASS_CODE 0x00
+ #define USB_PROTOCOL_CODE 0x00
+
+
+ #define NUM_ENDPOINTS 2
+ #define CONFIG_DESCRIPTOR_LENGTH sizeof( USB_CONFIGURATION_DESCRIPTOR) \
+ + sizeof( USB_INTERFACE_DESCRIPTOR) \
+ + ( NUM_ENDPOINTS * sizeof( USB_ENDPOINT_DESCRIPTOR))
+
+/*** Device descriptor ***/
+ CODE const USB_DEVICE_DESCRIPTOR DeviceDescription = {
+ sizeof( USB_DEVICE_DESCRIPTOR),
+ USB_DESCRIPTOR_TYPE_DEVICE,
+ SWAP( 0x0100),
+ USB_CLASS_CODE,
+ USB_SUBCLASS_CODE,
+ USB_PROTOCOL_CODE,
+ USB_MAX_PACKET0,
+ SWAP( USB_VENDOR_ID),
+ SWAP( USB_PRODUCT_ID),
+ SWAP( USB_RELEASE_VER),
+ 1, /* manufacturer string ID */
+ 2, /* product string ID */
+ 3, /* serial number string ID */
+ 1
+ };
+
+/*** All In Configuration 0 ***/
+ CODE const struct {
+ USB_CONFIGURATION_DESCRIPTOR configuration;
+ USB_INTERFACE_DESCRIPTOR interface;
+ USB_ENDPOINT_DESCRIPTOR endpoint_tx;
+ USB_ENDPOINT_DESCRIPTOR endpoint_rx;
+ } ConfigDescription = {
+ /*** Configuration descriptor ***/
+ {
+ sizeof( USB_CONFIGURATION_DESCRIPTOR),
+ USB_DESCRIPTOR_TYPE_CONFIGURATION,
+ SWAP( CONFIG_DESCRIPTOR_LENGTH),
+ 1, /* cnt of interfaces */
+ 1, /* this configuration ID */
+ 4, /* config.name string ID*/
+ 0x80, /* cfg, in spec is, taha bit 7 must be set to one -> 0xe0 , orig 0x60*/
+ 0x32 /* device power current from host 100mA */
+ },
+ /*** Interface Descriptor ***/
+ {
+ sizeof( USB_INTERFACE_DESCRIPTOR),
+ USB_DESCRIPTOR_TYPE_INTERFACE,
+ 0, /* index of this interface for SetInterface request */
+ 0, /* ID alternate interface */
+ NUM_ENDPOINTS,
+ USB_CLASS_CODE,
+ USB_SUBCLASS_CODE,
+ USB_PROTOCOL_CODE,
+ 5
+ },
+ /*** Endpoint 1 - Tx,Bulk ***/
+ {
+ sizeof( USB_ENDPOINT_DESCRIPTOR),
+ USB_DESCRIPTOR_TYPE_ENDPOINT,
+ 0x01,
+ USB_ENDPOINT_TYPE_BULK,
+ SWAP( USB_MAX_PACKET),
+ 0
+ },
+ /*** Endpoint 1 - Rx,Bulk ***/
+ {
+ sizeof( USB_ENDPOINT_DESCRIPTOR),
+ USB_DESCRIPTOR_TYPE_ENDPOINT,
+ 0x81,
+ USB_ENDPOINT_TYPE_BULK,
+ SWAP( USB_MAX_PACKET),
+ 0
+ }
+ };
+ /*** Strings - in unicode ***/
+ CODE const char Str0Desc[] = { /* supported languages of strings */
+ 4, 0x03, /* 2+2*N , N is count of supported languages */
+ 0x09,0x04 /* english 0x0409 */
+ };
+
+ CODE const char Str1Desc[] = { /* 1 = manufacturer */
+ 48,0x03,
+ 'S',0,
+ 'm',0,
+ 'o',0,
+ 'l',0,
+ 'i',0,
+ 'k',0,
+ ',',0,
+ 'B',0,
+ 'a',0,
+ 'r',0,
+ 't',0,
+ 'o',0,
+ 's',0,
+ 'i',0,
+ 'n',0,
+ 's',0,
+ 'k',0,
+ 'i',0,
+ ',',0,
+ 'P',0,
+ 'i',0,
+ 's',0,
+ 'a',0
+ };
+
+ CODE const char Str2Desc[] = { /* 2 = product */
+ 38, 0x03,
+ 'u',0,
+ 'L',0,
+ 'a',0,
+ 'n',0,
+ '2',0,
+ 'u',0,
+ 's',0,
+ 'b',0,
+ ' ',0,
+ 'c',0,
+ 'o',0,
+ 'n',0,
+ 'v',0,
+ 'e',0,
+ 'r',0,
+ 't',0,
+ 'o',0,
+ 'r',0
+ };
+
+
+ CODE const char Str3Desc[] = { /* 3 = version */
+ 26, 0x03,
+ '2',0,
+ '3',0,
+ '.',0,
+ '0',0,
+ '7',0,
+ '.',0,
+ '0',0,
+ '4',0,
+ '-',0,
+ '1',0,
+ '.',0,
+ '1',0
+ };
+ CODE const char Str4Desc[] = { /* 4 = configuration */
+ 34, 0x03,
+ 'C',0,
+ 'o',0,
+ 'n',0,
+ 'f',0,
+ 'i',0,
+ 'g',0,
+ 'u',0,
+ 'r',0,
+ 'a',0,
+ 't',0,
+ 'i',0,
+ 'o',0,
+ 'n',0,
+ ' ',0,
+ '#',0,
+ '1',0
+ };
+ CODE const char Str5Desc[] = { /* 5 = interface */
+ 26,0x03,
+ 'I',0,
+ 'n',0,
+ 't',0,
+ 'e',0,
+ 'r',0,
+ 'f',0,
+ 'a',0,
+ 'c',0,
+ 'e',0,
+ ' ',0,
+ '#',0,
+ '0',0
+ };
+
+ CODE const char Str6Desc[] = { /* EP1 OUT descriptor */
+ 136,0x03,
+ 'E',0,
+ 'P',0,
+ '1',0,
+ 'O',0,
+ 'U',0,
+ 'T',0,
+ '-',0,
+ 's',0,
+ 'e',0,
+ 'n',0,
+ 'd',0,
+ ' ',0,
+ 'm',0,
+ 'e',0,
+ 's',0,
+ 's',0,
+ 'a',0,
+ 'g',0,
+ 'e',0,
+ '-',0,
+ 'd',0,
+ 'a',0,
+ 'd',0,
+ 'r',0,
+ ',',0,
+ 's',0,
+ 'a',0,
+ 'd',0,
+ 'r',0,
+ ',',0,
+ 'c',0,
+ 'm',0,
+ 'd',0,
+ ',',0,
+ 'f',0,
+ 'l',0,
+ 'g',0,
+ ',',0,
+ 's',0,
+ 't',0,
+ 'a',0,
+ 'm',0,
+ 'p',0,
+ ',',0,
+ 'f',0,
+ 'r',0,
+ 'e',0,
+ 'e',0,
+ ',',0,
+ 'l',0,
+ 'e',0,
+ 'n',0,
+ '-',0,
+ 'l',0,
+ 'o',0,
+ ',',0,
+ 'l',0,
+ 'e',0,
+ 'n',0,
+ '-',0,
+ 'h',0,
+ 'i',0,
+ ',',0,
+ 'd',0,
+ 'a',0,
+ 't',0,
+ 'a',0
+ };
+
+ CODE const char Str7Desc[] = { /* EP2 IN descriptor */
+ 140,0x03,
+ 'E',0,
+ 'P',0,
+ '1',0,
+ 'I',0,
+ 'N',0,
+ '-',0,
+ 'r',0,
+ 'e',0,
+ 'c',0,
+ 'e',0,
+ 'i',0,
+ 'v',0,
+ 'e',0,
+ ' ',0,
+ 'm',0,
+ 'e',0,
+ 's',0,
+ 's',0,
+ 'a',0,
+ 'g',0,
+ 'e',0,
+ '-',0,
+ 'd',0,
+ 'a',0,
+ 'd',0,
+ 'r',0,
+ ',',0,
+ 's',0,
+ 'a',0,
+ 'd',0,
+ 'r',0,
+ ',',0,
+ 'c',0,
+ 'm',0,
+ 'd',0,
+ ',',0,
+ 'f',0,
+ 'l',0,
+ 'g',0,
+ ',',0,
+ 's',0,
+ 't',0,
+ 'a',0,
+ 'm',0,
+ 'p',0,
+ ',',0,
+ 'f',0,
+ 'r',0,
+ 'e',0,
+ 'e',0,
+ ',',0,
+ 'l',0,
+ 'e',0,
+ 'n',0,
+ '-',0,
+ 'l',0,
+ 'o',0,
+ ',',0,
+ 'l',0,
+ 'e',0,
+ 'n',0,
+ '-',0,
+ 'h',0,
+ 'i',0,
+ ',',0,
+ 'd',0,
+ 'a',0,
+ 't',0,
+ 'a',0
+ };
+
+ CODE const char Str8Desc[] = { /* EP1 OUT descriptor */
+ 136,0x03,
+ 'E',0,
+ 'P',0,
+ '2',0,
+ 'O',0,
+ 'U',0,
+ 'T',0,
+ '-',0,
+ 's',0,
+ 'e',0,
+ 'n',0,
+ 'd',0,
+ ' ',0,
+ 'm',0,
+ 'e',0,
+ 's',0,
+ 's',0,
+ 'a',0,
+ 'g',0,
+ 'e',0,
+ '-',0,
+ 'd',0,
+ 'a',0,
+ 'd',0,
+ 'r',0,
+ ',',0,
+ 's',0,
+ 'a',0,
+ 'd',0,
+ 'r',0,
+ ',',0,
+ 'c',0,
+ 'm',0,
+ 'd',0,
+ ',',0,
+ 'f',0,
+ 'l',0,
+ 'g',0,
+ ',',0,
+ 's',0,
+ 't',0,
+ 'a',0,
+ 'm',0,
+ 'p',0,
+ ',',0,
+ 'f',0,
+ 'r',0,
+ 'e',0,
+ 'e',0,
+ ',',0,
+ 'l',0,
+ 'e',0,
+ 'n',0,
+ '-',0,
+ 'l',0,
+ 'o',0,
+ ',',0,
+ 'l',0,
+ 'e',0,
+ 'n',0,
+ '-',0,
+ 'h',0,
+ 'i',0,
+ ',',0,
+ 'd',0,
+ 'a',0,
+ 't',0,
+ 'a',0
+ };
+
+ #define CNT_STRINGS 0x09
+
+ /* all strings in pointers array */
+ CODE const PUSB_STRING_DESCRIPTOR StringDescriptors[] = {
+ (PUSB_STRING_DESCRIPTOR) Str0Desc,
+ (PUSB_STRING_DESCRIPTOR) Str1Desc,
+ (PUSB_STRING_DESCRIPTOR) Str2Desc,
+ (PUSB_STRING_DESCRIPTOR) Str3Desc,
+ (PUSB_STRING_DESCRIPTOR) Str4Desc,
+ (PUSB_STRING_DESCRIPTOR) Str5Desc,
+ (PUSB_STRING_DESCRIPTOR) Str6Desc,
+ (PUSB_STRING_DESCRIPTOR) Str7Desc,
+ (PUSB_STRING_DESCRIPTOR) Str8Desc
+ };
+
+#endif /* USB_DEFS_MODULE */
--- /dev/null
+/*****************************************************/
+/*** Module : USB module ***/
+/*** Author : Roman Bartosinski (C) 28.04.2002 ***/
+/*** Modify : 08.08.2002, 16.04.2003 ***/
+/*****************************************************/
+
+#include <string.h>
+#include <cpu_def.h>
+#include <system_def.h>
+#include <usb/usb.h>
+#include <usb/usb_spec.h>
+#include <usb/usbdebug.h>
+#include <usb/usb_srq.h>
+#include <usb/usb_defs.h>
+#include <usb/lpcusb.h>
+
+//extern ul_dcnv_state_t ep1_dcnv_state;
+
+ // ****************************
+ int usb_stdreq_get_status( usb_device_t *udev)
+ {
+ unsigned char c,buf[2] = { 0, 0};
+ unsigned char epid = (unsigned char) udev->request.wIndex;
+ usb_ep_t *ep0 = &(udev->ep0);
+
+ usb_debug_print( DEBUG_LEVEL_HIGH, ("GetStatus\n"));
+ switch( udev->request.bmRequestType & USB_RECIPIENT) {
+ case USB_RECIPIENT_DEVICE:
+ if ( udev->flags & USB_FLAG_REMOTE_WAKE) //.remote_wake_up == 1)
+ buf[0] = USB_GETSTATUS_REMOTE_WAKEUP_ENABLED | USB_GETSTATUS_SELF_POWERED;
+ else
+ buf[0] = USB_GETSTATUS_SELF_POWERED;
+ break;
+ case USB_RECIPIENT_INTERFACE:
+ break;
+ case USB_RECIPIENT_ENDPOINT:
+/* if ( epid & USB_ENDPOINT_DIRECTION_MASK)
+ c = pdiSelectEp(pdiEp2Idx(epid)); // endpoint in
+ else
+ c = pdiSelectEp(pdiEp2Idx(epid)); // endpoint Out
+ #ifdef PDIUSBD12
+ buf[0] = (( c & PDI_SELEP_STALL) == PDI_SELEP_STALL);
+ #else
+ buf[0] = 0;
+ #endif*/
+ break;
+ default:
+ return USB_COMPLETE_FAIL;
+ }
+ usb_udev_write_endpoint( ep0, buf, 2);
+ return USB_COMPLETE_OK;
+ }
+
+ int usb_stdreq_clear_feature( usb_device_t *udev)
+ {
+ USB_DEVICE_REQUEST *dreq = &(udev->request);
+ unsigned char epid = (unsigned char) dreq->wIndex;
+
+ usb_debug_print( DEBUG_LEVEL_HIGH, ("ClearFeature\n"));
+ switch( dreq->bmRequestType & USB_RECIPIENT) {
+ case USB_RECIPIENT_DEVICE:
+ if ( dreq->wValue == USB_FEATURE_REMOTE_WAKEUP) {
+ udev->flags &= ~USB_FLAG_REMOTE_WAKE; //.remote_wake_up = 0;
+ usb_udev_ack_setup( udev);
+ return USB_COMPLETE_OK;
+ }
+ break;
+ case USB_RECIPIENT_ENDPOINT:
+ if ( dreq->wValue == USB_FEATURE_ENDPOINT_STALL) {
+ lpc_usb_clrstallEP(epid);
+ usb_udev_ack_setup( udev);
+ //initialize state of ulan convertor
+ switch (epid&(USB_ENDPOINT_DIRECTION_MASK|0x03)) {
+ case 0x01: //rx USB -> tx ulan
+// ul_freemsg(ep1_dcnv_state.tx_fd);
+// ep1_dcnv_state.tx_2send=-1;
+ break;
+ case 0x81: //tx USB -> rx ulan
+// ul_freemsg(ep1_dcnv_state.rx_fd);
+// ep1_dcnv_state.rx_2rec=-1;
+// ep1_dcnv_state.rx_wait4host=0;
+ break;
+ }
+ return USB_COMPLETE_OK;
+ }
+ break;
+ }
+ return USB_COMPLETE_FAIL;
+ }
+
+ int usb_stdreq_set_feature( usb_device_t *udev)
+ {
+ USB_DEVICE_REQUEST *dreq = &(udev->request);
+ unsigned char epid = (unsigned char) dreq->wIndex;
+
+ usb_debug_print( DEBUG_LEVEL_HIGH, ("SetFeature\n"));
+ switch( dreq->bmRequestType & USB_RECIPIENT) {
+ case USB_RECIPIENT_DEVICE:
+ if ( dreq->wValue == USB_FEATURE_REMOTE_WAKEUP) {
+ udev->flags |= USB_FLAG_REMOTE_WAKE; //.remote_wake_up = 1;
+ lpc_usb_setstallEP (epid);
+ usb_udev_ack_setup( udev);
+ return USB_COMPLETE_OK;
+ }
+ break;
+ case USB_RECIPIENT_ENDPOINT:
+ if ( dreq->wValue == USB_FEATURE_ENDPOINT_STALL) {
+ usb_udev_ack_setup( udev);
+ return USB_COMPLETE_OK;
+ }
+ break;
+ }
+ return USB_COMPLETE_FAIL;
+ }
+
+ int usb_stdreq_set_address( usb_device_t *udev)
+ {
+ int adr;
+ USB_DEVICE_REQUEST *dreq = &(udev->request);
+ adr=dreq->wValue & DEVICE_ADDRESS_MASK;
+ usb_debug_print( DEBUG_LEVEL_HIGH, ("SetAddr-%d\n",adr));
+ usb_udev_ack_setup( udev);
+ lpc_usb_set_addr(adr);
+ return USB_COMPLETE_OK;
+ }
+
+ int usb_stdreq_get_configuration( usb_device_t *udev)
+ {
+ unsigned char buf = udev->configuration; //usb_flags.configured;
+ usb_ep_t *ep0 = &(udev->ep0);
+ usb_debug_print( DEBUG_LEVEL_HIGH, ("GetConfig\n"));
+ usb_udev_write_endpoint( ep0, &buf, 1);
+ return USB_COMPLETE_OK;
+ }
+
+ int usb_stdreq_set_configuration( usb_device_t *udev)
+ {
+ USB_DEVICE_REQUEST *dreq = &(udev->request);
+ unsigned char iCfg = dreq->wValue & 0xff;
+ usb_debug_print( DEBUG_LEVEL_HIGH, ("SetConfig\n"));
+ if ( iCfg < 2) { // put device in unconfigured state or set configuration 1 ( no else)
+ usb_udev_ack_setup( udev);
+ lpc_usb_config_device(iCfg);
+ if ( iCfg) {
+ udev->flags |= USB_FLAG_CONFIGURED;
+ lpc_usb_configEP(0x01,USB_MAX_PACKET0);
+ lpc_usb_configEP(0x81,USB_MAX_PACKET0);
+ } else {
+ udev->flags &= ~USB_FLAG_CONFIGURED;
+ }
+ udev->configuration = iCfg; //usb_flags.configured = iCfg;
+ return USB_COMPLETE_OK;
+ } else
+ return USB_COMPLETE_FAIL;
+ }
+
+ int usb_stdreq_get_interface( usb_device_t *udev)
+ {
+ unsigned char buf = 0; /// udev->interface
+ usb_ep_t *ep0 = &(udev->ep0);
+ usb_debug_print( DEBUG_LEVEL_HIGH, ("GetIface\n"));
+ usb_udev_write_endpoint( ep0, &buf, 1);
+ return USB_COMPLETE_OK;
+ }
+
+ int usb_stdreq_set_interface( usb_device_t *udev)
+ {
+ USB_DEVICE_REQUEST *dreq = &(udev->request);
+
+ usb_debug_print( DEBUG_LEVEL_HIGH, ("SetIface\n"));
+ if (( dreq->wValue == 0) && ( dreq->wIndex == 0)) {
+ usb_udev_ack_setup( udev);
+ return USB_COMPLETE_OK;
+ } else {
+ return USB_COMPLETE_FAIL;
+ }
+ }
+
+ int usb_stdreq_get_descriptor( usb_device_t *udev)
+ {
+ unsigned char *pDesc;
+ unsigned short Len = 0;
+ USB_DEVICE_REQUEST *dreq = &(udev->request);
+ int i;
+
+ i = (dreq->wValue >> 8) & 0xff; /* MSB part of wValue */
+ usb_debug_print( DEBUG_LEVEL_HIGH, ("GetDesc\n"));
+ usb_debug_print( DEBUG_LEVEL_VERBOSE, ( " - %s desc.\n", /*(unsigned int)*/ usb_debug_get_std_descriptor(i)));
+
+ switch (i) {
+ case USB_DESCRIPTOR_TYPE_DEVICE:
+ pDesc = (unsigned char *)&DeviceDescription;
+ Len = sizeof( USB_DEVICE_DESCRIPTOR);
+ break;
+ case USB_DESCRIPTOR_TYPE_CONFIGURATION:
+ pDesc = (unsigned char *)&ConfigDescription;
+ Len = CONFIG_DESCRIPTOR_LENGTH;
+ break;
+ case USB_DESCRIPTOR_TYPE_INTERFACE:
+ pDesc = (unsigned char *)&ConfigDescription.interface;
+ Len = sizeof( USB_INTERFACE_DESCRIPTOR);
+ break;
+ case USB_DESCRIPTOR_TYPE_STRING:
+ i = dreq->wValue & 0xff; /* LSB part of wValue */
+ /*printf("Get descriptor indx=0x%02x\n", i);*/
+ if ( i < CNT_STRINGS) {
+ pDesc = (unsigned char *) StringDescriptors[ i];
+ Len = *pDesc;
+ /*usb_debug_print(0,("indx=0x%02x ptr=%p len=%d : '%c'\n", i, pDesc, Len, pDesc[2]));*/
+ } else {
+ return USB_COMPLETE_FAIL;
+ }
+ break;
+ default:
+ return USB_COMPLETE_FAIL;
+ }
+ if ( dreq->wLength < Len) Len = dreq->wLength;
+ usb_send_control_data( udev, pDesc, Len);
+ return USB_COMPLETE_OK;
+ }
+
+
+/*
+ void usb_init_stdreq_fnc( usb_device_t *udev)
+ {
+ // memset( udev->stdreq, 0, sizeof(udev->stdreq));
+
+ udev->stdreq[USB_REQUEST_GET_STATUS] = usb_stdreq_get_status;
+ udev->stdreq[USB_REQUEST_CLEAR_FEATURE] = usb_stdreq_clear_feature;
+ udev->stdreq[USB_REQUEST_SET_FEATURE] = usb_stdreq_set_feature;
+ udev->stdreq[USB_REQUEST_SET_ADDRESS] = usb_stdreq_set_address;
+ udev->stdreq[USB_REQUEST_GET_DESCRIPTOR] = usb_stdreq_get_descriptor;
+ udev->stdreq[USB_REQUEST_GET_CONFIGURATION] = usb_stdreq_get_configuration;
+ udev->stdreq[USB_REQUEST_SET_CONFIGURATION] = usb_stdreq_set_configuration;
+ udev->stdreq[USB_REQUEST_GET_INTERFACE] = usb_stdreq_get_interface;
+ udev->stdreq[USB_REQUEST_SET_INTERFACE] = usb_stdreq_set_interface;
+ }
+*/
--- /dev/null
+# -*- makefile -*-
+
+ARCH=arm
+MACH=lpc21xx
+BOARD=ul_usb1
+
+#CONFIG_BOARD_VARIANT=aa_rch
+#CONFIG_OC_UL_DRV_SYSLESS=y
+#CONFIG_OC_UL_DRV_U450_VARPINS=y
+#CONFIG_OC_UL_DRV_U450_VARPINS_MSRSWAP=y
+#CONFIG_ULAN_DY=y
+#CONFIG_ULOI_LT=y
+#CONFIG_ULOI_GENOBJIDTAG=y
+CONFIG_KEYVAL=y
+#CONFIG_APP_TEST_LPC=y
+#CONFIG_APP_ULAD31=y
+#CONFIG_APP_TEST=y
+#CONFIG_APP_USBTEST=y
+#CONFIG_APP_U2U=y
+#CONFIG_APP_U2U_V2=y
+CONFIG_USB_BASE=y
+CONFIG_USB_LPCUSB=y
+CONFIG_APP_USBCAN=y
+#CONFIG_APP_USBBOOT=y
+#CONFIG_ULBOOT=y
+
+
+CONFIG_STDIO_COM_PORT=0
+
+CROSS_COMPILE = arm-elf-
+TARGET_ARCH = -mcpu=arm7tdmi
+
+# Set default C flags. If theese are set elsewhere (e.g. on a command
+# line), these default flags are not used.
+DEBUG ?= -g
+OPTIMIZE ?= -O2
+
+LPC_BAUD = 38400
+TOLPC = tolpc --baud $(LPC_BAUD) --sdev /dev/ttyUSB0
+LOAD_CMD-ramisp = $(TOLPC) -v -q 7372 -L -f
+LOAD_CMD-boot = lpc21isp -bin /dev/ttyUSB0 $(LPC_BAUD) 12000
+
+# This selects linker script
+LD_SCRIPT=lpc2148
+#DEFAULT_LD_SCRIPT_VARIANT=boot
+
+#OUTPUT_FORMATS = bin hex srec
+
+OUTPUT_FORMATS = bin
+
+PROG_BASE=0x20000
+PROG_SIZE=0x20000
+
+UL_SENDHEX ?= ul_sendhex
+MOD ?= 3
+
+LOAD_CMD-app = \
+ $(UL_SENDHEX) -m $(MOD) -r -o 0 ; \
+ $(UL_SENDHEX) -m $(MOD) -o 0 -t 0x101 -s $(PROG_BASE) -l $(PROG_SIZE) -e; \
+ $(UL_SENDHEX) -m $(MOD) -o 0 -t 0x101 -b 256 -s $(PROG_BASE) -f binary
+
+RUN_CMD-app = \
+ $(UL_SENDHEX) -m $(MOD) -g $(PROG_BASE)
projects / lincan.git / commitdiff