--- /dev/null
+/* eb8245.c
+ * Linux CAN-bus device driver.
+ * Written by Arnaud Westenberg email:arnaud@wanadoo.nl
+ * Rewritten for new CAN queues by Pavel Pisa - OCERA team member
+ * email:pisa@cmp.felk.cvut.cz
+ * This software is released under the GPL-License.
+ * Version lincan-0.3 17 Jun 2004
+ */
+
+#include "../include/can.h"
+#include "../include/can_sysdep.h"
+#include "../include/main.h"
+#include "../include/eb8245.h"
+#include "../include/i82527.h"
+#include "../include/sja1000p.h"
+
+/*
+ * IO_RANGE is the io-memory range that gets reserved, please adjust according
+ * your hardware. Example: #define IO_RANGE 0x100 for i82527 chips or
+ * #define IO_RANGE 0x20 for sja1000 chips in basic CAN mode.
+ */
+#define IO_RANGE 0x100
+
+/**
+ * eb8245_request_io: - reserve io or memory range for can board
+ * @candev: pointer to candevice/board which asks for io. Field @io_addr
+ * of @candev is used in most cases to define start of the range
+ *
+ * The function eb8245_request_io() is used to reserve the io-memory. If your
+ * hardware uses a dedicated memory range as hardware control registers you
+ * will have to add the code to reserve this memory as well.
+ * %IO_RANGE is the io-memory range that gets reserved, please adjust according
+ * your hardware. Example: #define IO_RANGE 0x100 for i82527 chips or
+ * #define IO_RANGE 0x20 for sja1000 chips in basic CAN mode.
+ * Return Value: The function returns zero on success or %-ENODEV on failure
+ * File: src/eb8245.c
+ */
+int eb8245_request_io(struct candevice_t *candev)
+{
+ int remap_addr;
+
+ if (!can_request_mem_region(candev->io_addr,IO_RANGE,DEVICE_NAME " - eb8245")) {
+ CANMSG("Unable to request IO-memory: 0x%lx\n",candev->io_addr);
+ return -ENODEV;
+ }
+ if ( !( remap_addr = (long) ioremap( candev->io_addr, IO_RANGE ) ) ) {
+ CANMSG("Unable to access I/O memory at: 0x%lx\n", candev->io_addr);
+ can_release_mem_region(candev->io_addr,IO_RANGE);
+ return -ENODEV;
+
+ }
+ can_base_addr_fixup(candev, remap_addr);
+ DEBUGMSG("Registered IO-memory: 0x%lx - 0x%lx\n", candev->io_addr, candev->io_addr + IO_RANGE - 1);
+ return 0;
+}
+
+/**
+ * eb8245_release_io - free reserved io memory range
+ * @candev: pointer to candevice/board which releases io
+ *
+ * The function eb8245_release_io() is used to free reserved io-memory.
+ * In case you have reserved more io memory, don't forget to free it here.
+ * IO_RANGE is the io-memory range that gets released, please adjust according
+ * your hardware. Example: #define IO_RANGE 0x100 for i82527 chips or
+ * #define IO_RANGE 0x20 for sja1000 chips in basic CAN mode.
+ * Return Value: The function always returns zero
+ * File: src/eb8245.c
+ */
+int eb8245_release_io(struct candevice_t *candev)
+{
+ /* release I/O memory mapping */
+ iounmap((void*)candev->dev_base_addr);
+ can_release_mem_region(candev->io_addr,IO_RANGE);
+
+ return 0;
+}
+
+/**
+ * eb8245_reset - hardware reset routine
+ * @candev: Pointer to candevice/board structure
+ *
+ * The function eb8245_reset() is used to give a hardware reset. This is
+ * rather hardware specific so I haven't included example code. Don't forget to
+ * check the reset status of the chip before returning.
+ * Return Value: The function returns zero on success or %-ENODEV on failure
+ * File: src/eb8245.c
+ */
+int eb8245_reset(struct candevice_t *candev)
+{
+ int i;
+ struct canchip_t *chip=candev->chip[0];
+ unsigned cdr;
+
+ eb8245_write_register(sjaMOD_RM, chip->chip_base_addr+SJAMOD);
+ udelay(1000);
+
+ cdr=eb8245_read_register(chip->chip_base_addr+SJACDR);
+ eb8245_write_register(cdr|sjaCDR_PELICAN, chip->chip_base_addr+SJACDR);
+
+ eb8245_write_register(0, chip->chip_base_addr+SJAIER);
+
+ i=20;
+ eb8245_write_register(0, chip->chip_base_addr+SJAMOD);
+ while (eb8245_read_register(chip->chip_base_addr+SJAMOD)&sjaMOD_RM){
+ if(!i--) return -ENODEV;
+ udelay(1000);
+ eb8245_write_register(0, chip->chip_base_addr+SJAMOD);
+ }
+
+ cdr=eb8245_read_register(chip->chip_base_addr+SJACDR);
+ eb8245_write_register(cdr|sjaCDR_PELICAN, chip->chip_base_addr+SJACDR);
+
+ eb8245_write_register(0, chip->chip_base_addr+SJAIER);
+
+ return 0;
+}
+
+#define RESET_ADDR 0x0
+#define NR_82527 0
+#define NR_SJA1000 1
+
+/**
+ * eb8245_init_hw_data - Initialize hardware cards
+ * @candev: Pointer to candevice/board structure
+ *
+ * The function eb8245_init_hw_data() is used to initialize the hardware
+ * structure containing information about the installed CAN-board.
+ * %RESET_ADDR represents the io-address of the hardware reset register.
+ * %NR_82527 represents the number of intel 82527 chips on the board.
+ * %NR_SJA1000 represents the number of philips sja1000 chips on the board.
+ * The flags entry can currently only be %CANDEV_PROGRAMMABLE_IRQ to indicate that
+ * the hardware uses programmable interrupts.
+ * Return Value: The function always returns zero
+ * File: src/eb8245.c
+ */
+int eb8245_init_hw_data(struct candevice_t *candev)
+{
+ candev->res_addr=RESET_ADDR;
+ candev->nr_82527_chips=0;
+ candev->nr_sja1000_chips=1;
+ candev->nr_all_chips=1;
+ candev->flags |= CANDEV_PROGRAMMABLE_IRQ*0;
+
+ return 0;
+}
+
+/**
+ * eb8245_init_chip_data - Initialize chips
+ * @candev: Pointer to candevice/board structure
+ * @chipnr: Number of the CAN chip on the hardware card
+ *
+ * The function eb8245_init_chip_data() is used to initialize the hardware
+ * structure containing information about the CAN chips.
+ * %CHIP_TYPE represents the type of CAN chip. %CHIP_TYPE can be "i82527" or
+ * "sja1000".
+ * The @chip_base_addr entry represents the start of the 'official' memory map
+ * of the installed chip. It's likely that this is the same as the @io_addr
+ * argument supplied at module loading time.
+ * The @clock entry holds the chip clock value in Hz.
+ * The entry @sja_cdr_reg holds hardware specific options for the Clock Divider
+ * register. Options defined in the %sja1000.h file:
+ * %sjaCDR_CLKOUT_MASK, %sjaCDR_CLK_OFF, %sjaCDR_RXINPEN, %sjaCDR_CBP, %sjaCDR_PELICAN
+ * The entry @sja_ocr_reg holds hardware specific options for the Output Control
+ * register. Options defined in the %sja1000.h file:
+ * %sjaOCR_MODE_BIPHASE, %sjaOCR_MODE_TEST, %sjaOCR_MODE_NORMAL, %sjaOCR_MODE_CLOCK,
+ * %sjaOCR_TX0_LH, %sjaOCR_TX1_ZZ.
+ * The entry @int_clk_reg holds hardware specific options for the Clock Out
+ * register. Options defined in the %i82527.h file:
+ * %iCLK_CD0, %iCLK_CD1, %iCLK_CD2, %iCLK_CD3, %iCLK_SL0, %iCLK_SL1.
+ * The entry @int_bus_reg holds hardware specific options for the Bus
+ * Configuration register. Options defined in the %i82527.h file:
+ * %iBUS_DR0, %iBUS_DR1, %iBUS_DT1, %iBUS_POL, %iBUS_CBY.
+ * The entry @int_cpu_reg holds hardware specific options for the cpu interface
+ * register. Options defined in the %i82527.h file:
+ * %iCPU_CEN, %iCPU_MUX, %iCPU_SLP, %iCPU_PWD, %iCPU_DMC, %iCPU_DSC, %iCPU_RST.
+ * Return Value: The function always returns zero
+ * File: src/eb8245.c
+ */
+int eb8245_init_chip_data(struct candevice_t *candev, int chipnr)
+{
+ /*sja1000_fill_chipspecops(candev->chip[chipnr]);*/
+ sja1000p_fill_chipspecops(candev->chip[chipnr]);
+
+ candev->chip[chipnr]->chip_base_addr=candev->io_addr;
+ candev->chip[chipnr]->clock = 16000000;
+ candev->chip[chipnr]->int_clk_reg = 0x0;
+ candev->chip[chipnr]->int_bus_reg = 0x0;
+ candev->chip[chipnr]->sja_cdr_reg = sjaCDR_CBP | sjaCDR_CLK_OFF;
+ candev->chip[chipnr]->sja_ocr_reg = sjaOCR_MODE_NORMAL | sjaOCR_TX0_LH;
+
+ return 0;
+}
+
+/**
+ * eb8245_init_obj_data - Initialize message buffers
+ * @chip: Pointer to chip specific structure
+ * @objnr: Number of the message buffer
+ *
+ * The function eb8245_init_obj_data() is used to initialize the hardware
+ * structure containing information about the different message objects on the
+ * CAN chip. In case of the sja1000 there's only one message object but on the
+ * i82527 chip there are 15.
+ * The code below is for a i82527 chip and initializes the object base addresses
+ * The entry @obj_base_addr represents the first memory address of the message
+ * object. In case of the sja1000 @obj_base_addr is taken the same as the chips
+ * base address.
+ * Unless the hardware uses a segmented memory map, flags can be set zero.
+ * Return Value: The function always returns zero
+ * File: src/eb8245.c
+ */
+int eb8245_init_obj_data(struct canchip_t *chip, int objnr)
+{
+ chip->msgobj[objnr]->obj_base_addr=chip->chip_base_addr;
+ return 0;
+}
+
+/**
+ * eb8245_program_irq - program interrupts
+ * @candev: Pointer to candevice/board structure
+ *
+ * The function eb8245_program_irq() is used for hardware that uses
+ * programmable interrupts. If your hardware doesn't use programmable interrupts
+ * you should not set the @candevices_t->flags entry to %CANDEV_PROGRAMMABLE_IRQ and
+ * leave this function unedited. Again this function is hardware specific so
+ * there's no example code.
+ * Return value: The function returns zero on success or %-ENODEV on failure
+ * File: src/eb8245.c
+ */
+int eb8245_program_irq(struct candevice_t *candev)
+{
+ return 0;
+}
+
+/**
+ * eb8245_write_register - Low level write register routine
+ * @data: data to be written
+ * @address: memory address to write to
+ *
+ * The function eb8245_write_register() is used to write to hardware registers
+ * on the CAN chip. You should only have to edit this function if your hardware
+ * uses some specific write process.
+ * Return Value: The function does not return a value
+ * File: src/eb8245.c
+ */
+void eb8245_write_register(unsigned data, unsigned long address)
+{
+ /*DEBUGMSG("eb8245_write_register: addr=0x%lx data=0x%x",
+ address,data);*/
+ writeb(data,address);
+}
+
+/**
+ * eb8245_read_register - Low level read register routine
+ * @address: memory address to read from
+ *
+ * The function eb8245_read_register() is used to read from hardware registers
+ * on the CAN chip. You should only have to edit this function if your hardware
+ * uses some specific read process.
+ * Return Value: The function returns the value stored in @address
+ * File: src/eb8245.c
+ */
+unsigned eb8245_read_register(unsigned long address)
+{
+ return readb(address);
+}
+
+/* !!! Don't change this function !!! */
+int eb8245_register(struct hwspecops_t *hwspecops)
+{
+ hwspecops->request_io = eb8245_request_io;
+ hwspecops->release_io = eb8245_release_io;
+ hwspecops->reset = eb8245_reset;
+ hwspecops->init_hw_data = eb8245_init_hw_data;
+ hwspecops->init_chip_data = eb8245_init_chip_data;
+ hwspecops->init_obj_data = eb8245_init_obj_data;
+ hwspecops->write_register = eb8245_write_register;
+ hwspecops->read_register = eb8245_read_register;
+ hwspecops->program_irq = eb8245_program_irq;
+ return 0;
+}
projects / lincan.git / commitdiff