X-Git-Url: http://rtime.felk.cvut.cz/gitweb/lincan.git/blobdiff_plain/f2fcdbb5f9333a58a08f56daaca8cad7e5a95699..3129fcd8094edcb910b708463fdf1a234f11fb55:/lincan/src/bfadcan.c

diff --git a/lincan/src/bfadcan.c b/lincan/src/bfadcan.c
index 3e145f6..8eeaf3d 100644
--- a/lincan/src/bfadcan.c
+++ b/lincan/src/bfadcan.c
@@ -60,9 +60,9 @@ void bfadcan_write_register(unsigned char data, unsigned long address);
 
 
 /**
- * bfadcan_request_io: - reserve io memory
- * @io_addr: The reserved memory starts at @io_addr, wich is the module 
- * parameter @io.
+ * bfadcan_request_io: - reserve io or memory range for can board
+ * @candev: pointer to candevice/board which asks for io. Field @io_addr
+ *	of @candev is used in most cases to define start of the range
  *
  * The function bfadcan_request_io() is used to reserve the io-memory. If your
  * hardware uses a dedicated memory range as hardware control registers you
@@ -85,8 +85,8 @@ int bfadcan_request_io(struct candevice_t *candev)
 }
 
 /**
- * bfadcan_release_io - free reserved io-memory
- * @io_addr: Start of the memory range to be released.
+ * bfadcan_elease_io - free reserved io memory range
+ * @candev: pointer to candevice/board which releases io
  *
  * The function bfadcan_release_io() is used to free reserved io-memory.
  * In case you have reserved more io memory, don't forget to free it here.
@@ -105,7 +105,7 @@ int bfadcan_release_io(struct candevice_t *candev)
 
 /**
  * bfadcan_reset - hardware reset routine
- * @card: Number of the hardware card.
+ * @candev: Pointer to candevice/board structure
  *
  * The function bfadcan_reset() is used to give a hardware reset. This is 
  * rather hardware specific so I haven't included example code. Don't forget to 
@@ -149,8 +149,8 @@ int bfadcan_reset(struct candevice_t *candev)
 #define NR_SJA1000 1
 
 /**
- * bfadcan_init_hw_data - Initialze hardware cards
- * @card: Number of the hardware card.
+ * bfadcan_init_hw_data - Initialize hardware cards
+ * @candev: Pointer to candevice/board structure
  *
  * The function bfadcan_init_hw_data() is used to initialize the hardware
  * structure containing information about the installed CAN-board.
@@ -176,7 +176,7 @@ int bfadcan_init_hw_data(struct candevice_t *candev)
 #define CHIP_TYPE "sja1000p"
 /**
  * bfadcan_init_chip_data - Initialize chips
- * @card: Number of the hardware card
+ * @candev: Pointer to candevice/board structure
  * @chipnr: Number of the CAN chip on the hardware card
  *
  * The function bfadcan_init_chip_data() is used to initialize the hardware
@@ -232,7 +232,7 @@ int bfadcan_init_chip_data(struct candevice_t *candev, int chipnr)
 
 /**
  * bfadcan_init_obj_data - Initialize message buffers
- * @chipnr: Number of the CAN chip
+ * @chip: Pointer to chip specific structure
  * @objnr: Number of the message buffer
  *
  * The function bfadcan_init_obj_data() is used to initialize the hardware
@@ -257,7 +257,7 @@ int bfadcan_init_obj_data(struct chip_t *chip, int objnr)
 
 /**
  * bfadcan_program_irq - program interrupts
- * @card: Number of the hardware card.
+ * @candev: Pointer to candevice/board structure
  *
  * The function bfadcan_program_irq() is used for hardware that uses 
  * programmable interrupts. If your hardware doesn't use programmable interrupts