X-Git-Url: http://rtime.felk.cvut.cz/gitweb/lincan.git/blobdiff_plain/b34a548a5dfd2f0b068fd835a4cd51680d851068..6234a9dc385e5a9258a84227b2eab09bbb099c27:/lincan/src/cc_can104.c

diff --git a/lincan/src/cc_can104.c b/lincan/src/cc_can104.c
index 1197bcf..15819a3 100644
--- a/lincan/src/cc_can104.c
+++ b/lincan/src/cc_can104.c
@@ -4,14 +4,13 @@
  * Rewritten for new CAN queues by Pavel Pisa - OCERA team member
  * email:pisa@cmp.felk.cvut.cz
  * This software is released under the GPL-License.
- * Version lincan-0.2  9 Jul 2003
+ * Version lincan-0.3  17 Jun 2004
  */ 
 
 #include "../include/can.h"
 #include "../include/can_sysdep.h"
 #include "../include/main.h"
 #include "../include/cc_can104.h"
-#include "../include/i82527.h"
 #include "../include/sja1000.h"
 
 /*
@@ -109,7 +108,6 @@ int cc104_init_hw_data(struct candevice_t *candev)
 	return 0;
 }
 
-#define CHIP_TYPE "sja1000"
 /**
  * template_init_chip_data - Initialize chips
  * @candev: Pointer to candevice/board structure
@@ -125,11 +123,11 @@ int cc104_init_hw_data(struct candevice_t *candev)
  * The @clock entry holds the chip clock value in Hz.
  * The entry @sja_cdr_reg holds hardware specific options for the Clock Divider
  * register. Options defined in the %sja1000.h file:
- * %CDR_CLKOUT_MASK, %CDR_CLK_OFF, %CDR_RXINPEN, %CDR_CBP, %CDR_PELICAN
+ * %sjaCDR_CLKOUT_MASK, %sjaCDR_CLK_OFF, %sjaCDR_RXINPEN, %sjaCDR_CBP, %sjaCDR_PELICAN
  * The entry @sja_ocr_reg holds hardware specific options for the Output Control
  * register. Options defined in the %sja1000.h file:
- * %OCR_MODE_BIPHASE, %OCR_MODE_TEST, %OCR_MODE_NORMAL, %OCR_MODE_CLOCK,
- * %OCR_TX0_LH, %OCR_TX1_ZZ.
+ * %sjaOCR_MODE_BIPHASE, %sjaOCR_MODE_TEST, %sjaOCR_MODE_NORMAL, %sjaOCR_MODE_CLOCK,
+ * %sjaOCR_TX0_LH, %sjaOCR_TX1_ZZ.
  * The entry @int_clk_reg holds hardware specific options for the Clock Out
  * register. Options defined in the %i82527.h file:
  * %iCLK_CD0, %iCLK_CD1, %iCLK_CD2, %iCLK_CD3, %iCLK_SL0, %iCLK_SL1.
@@ -141,13 +139,13 @@ int cc104_init_hw_data(struct candevice_t *candev)
  */
 int cc104_init_chip_data(struct candevice_t *candev, int chipnr)
 {
-	candev->chip[chipnr]->chip_type=CHIP_TYPE;
-	candev->chip[chipnr]->chip_base_addr=candev->io_addr;
+	sja1000_fill_chipspecops(candev->chip[chipnr]);
+	candev->chip[chipnr]->chip_base_addr=can_ioport2ioptr(candev->io_addr);
 	candev->chip[chipnr]->clock = 16000000;
 	candev->chip[chipnr]->flags = 0;
-	candev->chip[chipnr]->sja_cdr_reg = CDR_CBP | CDR_CLK_OFF;
-	candev->chip[chipnr]->sja_ocr_reg = OCR_MODE_NORMAL |
-								OCR_TX0_LH;
+	candev->chip[chipnr]->sja_cdr_reg = sjaCDR_CBP | sjaCDR_CLK_OFF;
+	candev->chip[chipnr]->sja_ocr_reg = sjaOCR_MODE_NORMAL |
+								sjaOCR_TX0_LH;
 
 	return 0;
 }
@@ -169,7 +167,7 @@ int cc104_init_chip_data(struct candevice_t *candev, int chipnr)
  * Return Value: The function always returns zero
  * File: src/template.c
  */
-int cc104_init_obj_data(struct chip_t *chip, int objnr)
+int cc104_init_obj_data(struct canchip_t *chip, int objnr)
 {
 	chip->msgobj[objnr]->obj_base_addr=chip->chip_base_addr;
 	
@@ -204,9 +202,9 @@ int cc104_program_irq(struct candevice_t *candev)
  * Return Value: The function does not return a value
  * File: src/template.c
  */
-void cc104_write_register(unsigned char data, unsigned long address)
+void cc104_write_register(unsigned data, can_ioptr_t address)
 {
-	outb(data,address);
+	can_outb(data,address);
 }
 
 /**
@@ -219,9 +217,9 @@ void cc104_write_register(unsigned char data, unsigned long address)
  * Return Value: The function returns the value stored in @address
  * File: src/template.c
  */
-unsigned cc104_read_register(unsigned long address)
+unsigned cc104_read_register(can_ioptr_t address)
 {
-	return inb(address);
+	return can_inb(address);
 }
 
 /* !!! Don't change this function !!! */