X-Git-Url: http://rtime.felk.cvut.cz/gitweb/lincan.git/blobdiff_plain/4b51897df818c0cef960dbfab815c7e69586c654..7c28d4d63c2ccd9945d1b0bb11dd3caff4c382b3:/embedded/app/usbcan/main.c

diff --git a/embedded/app/usbcan/main.c b/embedded/app/usbcan/main.c
index 6a7b8be..14fbe28 100644
--- a/embedded/app/usbcan/main.c
+++ b/embedded/app/usbcan/main.c
@@ -68,6 +68,7 @@
 #include "./usb/usb_vend.h"
 
 extern int can_lmc1_register(struct hwspecops_t *hwspecops);
+extern int ul_usb1_register(struct hwspecops_t *hwspecops);
 
 #define MASK_EP1RX  0x01
 #define MASK_EP1TX  0x02
@@ -155,19 +156,6 @@ int sys_err(){
   }
 }
 
-/***********************************************************************
- * Microsecond delay routine
- ***********************************************************************/
-/*
-void udelay(long time)
-{
-  volatile long ticks=(time * CCLK) / 2000000;
-  do{
-    ticks--;
-  } while(ticks>0);
-}
-*/
-
 /***********************************************************************
  * Routine for visible LED blinking (on USB transmission)
  ***********************************************************************/
@@ -230,10 +218,6 @@ int main(void)
 	// * CAN device initialization - device side (adapted from LinCAN setup.c)
 	// ***********************************************************************
 
-//	useless with lpc17xx (defined in can_lpcbusemu.c)
-//	can_init();
-
-
 	DEBUGMSG("Initiating CAN device initialization\n");
 	baudrate[0]=1000;
 
@@ -262,12 +246,12 @@ int main(void)
 
 	
 
-	// DEBUG
-	//ul_usb1_register(candev->hwspecops);  //(defined in ul_usb1.c)
-	// register for another board:
+#ifdef CONFIG_OC_LINCAN_CARD_ul_usb1
+	ul_usb1_register(candev->hwspecops);
+#endif
+#ifdef CONFIG_OC_LINCAN_CARD_can_lmc1
 	can_lmc1_register(candev->hwspecops);
-
-	
+#endif
 
 	bd=baudrate[0];
 	if (candev->hwspecops->init_hw_data(candev)){
@@ -300,13 +284,17 @@ int main(void)
 	}
 
 
-	if (candev->hwspecops->request_io(candev))
+	if (candev->hwspecops->request_io(candev)) {
+ 		CANMSG("Error to request IO\n");
 		sys_err();
+	}
 	candev->flags|=CANDEV_IO_RESERVED;
 
 
-	if (candev->hwspecops->reset(candev))
+	if (candev->hwspecops->reset(candev)) {
+ 		CANMSG("Error to reset chip\n");
 		sys_err();
+	}
 
 
 	for(chipnr=0; chipnr<candev->nr_all_chips; chipnr++) {
@@ -428,9 +416,11 @@ int main(void)
 		usb_check_events(&usb_device);
 		usb_control_response(&usb_device);
 
-// useless with lpc17xx:
-//		if (!(IO0PIN&P0_SJA1000_INT_PIN)) //INT PIN is inverted
-//			chip->chipspecops->irq_handler(0,chip);
+#ifdef CONFIG_OC_LINCAN_CARD_ul_usb1
+		/* polled IRQ mode for ul_usb1 board*/
+		if (!(IO0PIN&P0_SJA1000_INT_PIN)) /* INT PIN is inverted */
+			chip->chipspecops->irq_handler(0,chip);
+#endif
 
 		if (usb_device.ep_events & MASK_EP1RX) {  //EP1RX - data waiting to receive