X-Git-Url: http://rtime.felk.cvut.cz/gitweb/lincan.git/blobdiff_plain/11132ea490f9e860744ee4f851c67e7fb4444231..2827b727d2910a3b48f9de7d67b3a67f59e256c7:/lincan/src/template.c

diff --git a/lincan/src/template.c b/lincan/src/template.c
index 3075ad5..f530228 100644
--- a/lincan/src/template.c
+++ b/lincan/src/template.c
@@ -12,13 +12,8 @@
  * possible to load the driver with the hardware option hw=template.
  */
 
-#include <linux/autoconf.h>
-
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <asm/errno.h>
-#include <asm/io.h>
-
+#include "../include/can.h"
+#include "../include/can_sysdep.h"
 #include "../include/main.h"
 #include "../include/template.h"
 #include "../include/i82527.h"
@@ -32,9 +27,9 @@
 #define IO_RANGE 0x100
 
 /**
- * template_request_io: - reserve io memory
- * @io_addr: The reserved memory starts at @io_addr, wich is the module 
- * parameter @io.
+ * template_request_io: - reserve io or memory range for can board
+ * @candev: pointer to candevice/board which asks for io. Field @io_addr
+ *	of @candev is used in most cases to define start of the range
  *
  * The function template_request_io() is used to reserve the io-memory. If your
  * hardware uses a dedicated memory range as hardware control registers you
@@ -57,8 +52,8 @@ int template_request_io(struct candevice_t *candev)
 }
 
 /**
- * template_release_io - free reserved io-memory
- * @io_addr: Start of the memory range to be released.
+ * template_release_io - free reserved io memory range
+ * @candev: pointer to candevice/board which releases io
  *
  * The function template_release_io() is used to free reserved io-memory.
  * In case you have reserved more io memory, don't forget to free it here.
@@ -77,7 +72,7 @@ int template_release_io(struct candevice_t *candev)
 
 /**
  * template_reset - hardware reset routine
- * @card: Number of the hardware card.
+ * @candev: Pointer to candevice/board structure
  *
  * The function template_reset() is used to give a hardware reset. This is 
  * rather hardware specific so I haven't included example code. Don't forget to 
@@ -96,14 +91,14 @@ int template_reset(struct candevice_t *candev)
 
 /**
  * template_init_hw_data - Initialize hardware cards
- * @card: Number of the hardware card.
+ * @candev: Pointer to candevice/board structure
  *
  * The function template_init_hw_data() is used to initialize the hardware
  * structure containing information about the installed CAN-board.
  * %RESET_ADDR represents the io-address of the hardware reset register.
  * %NR_82527 represents the number of Intel 82527 chips on the board.
  * %NR_SJA1000 represents the number of Philips sja1000 chips on the board.
- * The flags entry can currently only be %PROGRAMMABLE_IRQ to indicate that
+ * The flags entry can currently only be %CANDEV_PROGRAMMABLE_IRQ to indicate that
  * the hardware uses programmable interrupts.
  * Return Value: The function always returns zero
  * File: src/template.c
@@ -114,7 +109,7 @@ int template_init_hw_data(struct candevice_t *candev)
 	candev->nr_82527_chips=NR_82527;
 	candev->nr_sja1000_chips=NR_SJA1000;
 	candev->nr_all_chips=NR_82527+NR_SJA1000;
-	candev->flags |= PROGRAMMABLE_IRQ;
+	candev->flags |= CANDEV_PROGRAMMABLE_IRQ;
 
 	return 0;
 }
@@ -122,7 +117,7 @@ int template_init_hw_data(struct candevice_t *candev)
 #define CHIP_TYPE "i82527"
 /**
  * template_init_chip_data - Initialize chips
- * @card: Number of the hardware card
+ * @candev: Pointer to candevice/board structure
  * @chipnr: Number of the CAN chip on the hardware card
  *
  * The function template_init_chip_data() is used to initialize the hardware
@@ -169,7 +164,7 @@ int template_init_chip_data(struct candevice_t *candev, int chipnr)
 
 /**
  * template_init_obj_data - Initialize message buffers
- * @chipnr: Number of the CAN chip
+ * @chip: Pointer to chip specific structure
  * @objnr: Number of the message buffer
  *
  * The function template_init_obj_data() is used to initialize the hardware
@@ -187,18 +182,17 @@ int template_init_chip_data(struct candevice_t *candev, int chipnr)
 int template_init_obj_data(struct chip_t *chip, int objnr)
 {
 	chip->msgobj[objnr]->obj_base_addr=chip->chip_base_addr+(objnr+1)*0x10;
-	chip->msgobj[objnr]->flags=0;
 	
 	return 0;
 }
 
 /**
  * template_program_irq - program interrupts
- * @card: Number of the hardware card.
+ * @candev: Pointer to candevice/board structure
  *
  * The function template_program_irq() is used for hardware that uses 
  * programmable interrupts. If your hardware doesn't use programmable interrupts
- * you should not set the @candevices_t->flags entry to %PROGRAMMABLE_IRQ and 
+ * you should not set the @candevices_t->flags entry to %CANDEV_PROGRAMMABLE_IRQ and 
  * leave this function unedited. Again this function is hardware specific so 
  * there's no example code.
  * Return value: The function returns zero on success or %-ENODEV on failure