--- /dev/null
+/**************************************************************************/
+/* File: mpc5200.c - Freescale MPC5200 MSCAN controller support */
+/* */
+/* LinCAN - (Not only) Linux CAN bus driver */
+/* Copyright (C) 2002-2009 DCE FEE CTU Prague <http://dce.felk.cvut.cz> */
+/* Copyright (C) 2002-2009 Pavel Pisa <pisa@cmp.felk.cvut.cz> */
+/* Copyright (C) 2007-2008 Martin Petera <peterm4@fel.cvut.cz> */
+/* Funded by OCERA and FRESCOR IST projects */
+/* Based on CAN driver code by Arnaud Westenberg <arnaud@wanadoo.nl> */
+/* */
+/* LinCAN is free software; you can redistribute it and/or modify it */
+/* under terms of the GNU General Public License as published by the */
+/* Free Software Foundation; either version 2, or (at your option) any */
+/* later version. LinCAN is distributed in the hope that it will be */
+/* useful, but WITHOUT ANY WARRANTY; without even the implied warranty */
+/* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU */
+/* General Public License for more details. You should have received a */
+/* copy of the GNU General Public License along with LinCAN; see file */
+/* COPYING. If not, write to the Free Software Foundation, 675 Mass Ave, */
+/* Cambridge, MA 02139, USA. */
+/* */
+/* To allow use of LinCAN in the compact embedded systems firmware */
+/* and RT-executives (RTEMS for example), main authors agree with next */
+/* special exception: */
+/* */
+/* Including LinCAN header files in a file, instantiating LinCAN generics */
+/* or templates, or linking other files with LinCAN objects to produce */
+/* an application image/executable, does not by itself cause the */
+/* resulting application image/executable to be covered by */
+/* the GNU General Public License. */
+/* This exception does not however invalidate any other reasons */
+/* why the executable file might be covered by the GNU Public License. */
+/* Publication of enhanced or derived LinCAN files is required although. */
+/**************************************************************************/
+
+#include "../include/can.h"
+#include "../include/can_sysdep.h"
+#include "../include/main.h"
+#include "../include/mpc5200.h"
+#include "../include/mscan.h"
+
+int mpc5200_request_io(struct candevice_t *candev)
+{
+ if (!can_request_io_region(candev->io_addr, candev->nr_all_chips * IO_RANGE, DEVICE_NAME)) {
+ CANMSG("Unable to open port: 0x%lx\n",candev->io_addr);
+ return -ENODEV;
+ }
+
+ DEBUGMSG("Registered IO-memory: 0x%lx - 0x%lx\n", candev->io_addr, candev->io_addr + candev->nr_all_chips * IO_RANGE - 1);
+ return 0;
+}
+
+int mpc5200_release_io(struct candevice_t *candev)
+{
+ can_release_io_region(candev->io_addr, candev->nr_all_chips * IO_RANGE);
+
+ return 0;
+}
+
+int mpc5200_reset(struct candevice_t *candev)
+{
+ int i;
+ DEBUGMSG("Resetting MSCAN chips ...\n");
+
+ for (i = 0; i < candev->nr_all_chips; i++)
+ {
+ /* !!! Assuming this card has ONLY MSCAN chips !!! */
+ if (mscan_reset_chip(candev->chip[i])) return -ENODEV;
+ }
+
+ return 0;
+}
+
+int mpc5200_init_hw_data(struct candevice_t *candev)
+{
+ /* candev->res_addr = RESET_ADDR; */
+ candev->nr_82527_chips = NR_82527;
+ candev->nr_sja1000_chips = NR_SJA1000;
+ candev->nr_all_chips = NR_ALL;
+ /* candev->flags |= CANDEV_PROGRAMMABLE_IRQ; */
+
+ return 0;
+}
+int mpc5200_init_chip_data(struct candevice_t *candev, int chipnr)
+{
+ mscan_fill_chipspecops(candev->chip[chipnr]);
+
+ candev->chip[chipnr]->chip_base_addr = can_ioport2ioptr(candev->io_addr) + chipnr * MPC5200_CAN_CHIP_OFFSET; /* one chip with 2 interfaces */
+ candev->chip[chipnr]->clock = MPC5200_CLK_FREQ;
+ candev->chip[chipnr]->chip_irq = MPC5200_CAN_IRQ + chipnr;
+ candev->chip[chipnr]->hostdevice = candev;
+
+ return 0;
+}
+
+int mpc5200_init_obj_data(struct canchip_t *chip, int objnr)
+{
+ /* we have only two chips with only one mailbox each */
+ chip->msgobj[objnr]->obj_base_addr = (can_ioptr_t) MSCAN_CTL0 + MPC5200_CAN_CHIP_OFFSET * objnr;
+
+ return 0;
+}
+
+int mpc5200_program_irq(struct candevice_t *candev)
+{
+ /* we don't use programmable interrupt on MPC5200 */
+ return 0;
+}
+
+
+void mpc5200_write_register(unsigned data, can_ioptr_t address)
+{
+ /* address is an absolute address */
+ DEBUGMSG("write register\n");
+ writeb(data, address); /* regs in PowerPC (5200) are one-byte length */
+}
+
+unsigned mpc5200_read_register(can_ioptr_t address)
+{
+ /* address is an absolute address */
+ DEBUGMSG("read register\n");
+ return readb(address); /* regs in PowerPC (5200) are one-byte length */
+}
+
+int mpc5200_register(struct hwspecops_t *hwspecops)
+{
+ hwspecops->request_io = mpc5200_request_io;
+ hwspecops->release_io = mpc5200_release_io;
+ hwspecops->reset = mpc5200_reset;
+ hwspecops->init_hw_data = mpc5200_init_hw_data;
+ hwspecops->init_chip_data = mpc5200_init_chip_data;
+ hwspecops->init_obj_data = mpc5200_init_obj_data;
+ hwspecops->program_irq = mpc5200_program_irq;
+ hwspecops->write_register = mpc5200_write_register;
+ hwspecops->read_register = mpc5200_read_register;
+ return 0;
+}
projects / lincan.git / blobdiff