]> rtime.felk.cvut.cz Git - frescor/ffmpeg.git/blob - libavformat/rtp_h264.c
564424d5d36967691a273dacd0256802c1ee0eda
[frescor/ffmpeg.git] / libavformat / rtp_h264.c
1 /*
2  * RTP H264 Protocol (RFC3984)
3  * Copyright (c) 2006 Ryan Martell.
4  *
5  * This file is part of FFmpeg.
6  *
7  * FFmpeg is free software; you can redistribute it and/or
8  * modify it under the terms of the GNU Lesser General Public
9  * License as published by the Free Software Foundation; either
10  * version 2.1 of the License, or (at your option) any later version.
11  *
12  * FFmpeg is distributed in the hope that it will be useful,
13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
15  * Lesser General Public License for more details.
16  *
17  * You should have received a copy of the GNU Lesser General Public
18  * License along with FFmpeg; if not, write to the Free Software
19  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
20  */
21
22 /**
23 * @file rtp_h264.c
24  * @brief H.264 / RTP Code (RFC3984)
25  * @author Ryan Martell <rdm4@martellventures.com>
26  *
27  * @note Notes:
28  * Notes:
29  * This currently supports packetization mode:
30  * Single Nal Unit Mode (0), or
31  * Non-Interleaved Mode (1).  It currently does not support
32  * Interleaved Mode (2). (This requires implementing STAP-B, MTAP16, MTAP24, FU-B packet types)
33  *
34  * @note TODO:
35  * 1) RTCP sender reports for udp streams are required..
36  *
37  */
38
39 #include "avformat.h"
40 #include "mpegts.h"
41 #include "bitstream.h"
42
43 #include <unistd.h>
44 #include "network.h"
45 #include <assert.h>
46
47 #include "rtp_internal.h"
48 #include "rtp_h264.h"
49 #include "base64.h"
50
51 /**
52     RTP/H264 specific private data.
53 */
54 typedef struct h264_rtp_extra_data {
55     unsigned long cookie;       ///< sanity check, to make sure we get the pointer we're expecting.
56
57     //sdp setup parameters
58     uint8_t profile_idc;        ///< from the sdp setup parameters.
59     uint8_t profile_iop;        ///< from the sdp setup parameters.
60     uint8_t level_idc;          ///< from the sdp setup parameters.
61     int packetization_mode;     ///< from the sdp setup parameters.
62 #ifdef DEBUG
63     int packet_types_received[32];
64 #endif
65 } h264_rtp_extra_data;
66
67 #define MAGIC_COOKIE (0xdeadbeef)       ///< Cookie for the extradata; to verify we are what we think we are, and that we haven't been freed.
68 #define DEAD_COOKIE (0xdeaddead)        ///< Cookie for the extradata; once it is freed.
69
70 /* ---------------- private code */
71 static void sdp_parse_fmtp_config_h264(AVStream * stream,
72                                        h264_rtp_extra_data * h264_data,
73                                        char *attr, char *value)
74 {
75     AVCodecContext *codec = stream->codec;
76     assert(codec->codec_id == CODEC_ID_H264);
77     assert(h264_data != NULL);
78
79     if (!strcmp(attr, "packetization-mode")) {
80         av_log(NULL, AV_LOG_DEBUG, "H.264/RTP Packetization Mode: %d\n", atoi(attr));
81         h264_data->packetization_mode = atoi(attr);
82         /*
83            Packetization Mode:
84            0 or not present: Single NAL mode (Only nals from 1-23 are allowed)
85            1: Non-interleaved Mode: 1-23, 24 (STAP-A), 28 (FU-A) are allowed.
86            2: Interleaved Mode: 25 (STAP-B), 26 (MTAP16), 27 (MTAP24), 28 (FU-A), and 29 (FU-B) are allowed.
87          */
88         if (h264_data->packetization_mode > 1)
89             av_log(stream, AV_LOG_ERROR,
90                    "H.264/RTP Interleaved RTP mode is not supported yet.");
91     } else if (!strcmp(attr, "profile-level-id")) {
92         if (strlen(value) == 6) {
93             char buffer[3];
94             // 6 characters=3 bytes, in hex.
95             uint8_t profile_idc;
96             uint8_t profile_iop;
97             uint8_t level_idc;
98
99             buffer[0] = value[0]; buffer[1] = value[1]; buffer[2] = '\0';
100             profile_idc = strtol(buffer, NULL, 16);
101             buffer[0] = value[2]; buffer[1] = value[3];
102             profile_iop = strtol(buffer, NULL, 16);
103             buffer[0] = value[4]; buffer[1] = value[5];
104             level_idc = strtol(buffer, NULL, 16);
105
106             // set the parameters...
107             av_log(NULL, AV_LOG_DEBUG,
108                    "H.264/RTP Profile IDC: %x Profile IOP: %x Level: %x\n",
109                    profile_idc, profile_iop, level_idc);
110             h264_data->profile_idc = profile_idc;
111             h264_data->profile_iop = profile_iop;
112             h264_data->level_idc = level_idc;
113         }
114     } else  if (!strcmp(attr, "sprop-parameter-sets")) {
115         uint8_t start_sequence[]= { 0, 0, 1 };
116         codec->extradata_size= 0;
117         codec->extradata= NULL;
118
119         while (*value) {
120             char base64packet[1024];
121             uint8_t decoded_packet[1024];
122             uint32_t packet_size;
123             char *dst = base64packet;
124
125             while (*value && *value != ','
126                    && (dst - base64packet) < sizeof(base64packet) - 1) {
127                 *dst++ = *value++;
128             }
129             *dst++ = '\0';
130
131             if (*value == ',')
132                 value++;
133
134             packet_size= av_base64_decode(decoded_packet, base64packet, sizeof(decoded_packet));
135             if (packet_size) {
136                 uint8_t *dest= av_malloc(packet_size+sizeof(start_sequence)+codec->extradata_size);
137                 if(dest)
138                 {
139                     if(codec->extradata_size)
140                     {
141                         // av_realloc?
142                         memcpy(dest, codec->extradata, codec->extradata_size);
143                         av_free(codec->extradata);
144                     }
145
146                     memcpy(dest+codec->extradata_size, start_sequence, sizeof(start_sequence));
147                     memcpy(dest+codec->extradata_size+sizeof(start_sequence), decoded_packet, packet_size);
148
149                     codec->extradata= dest;
150                     codec->extradata_size+= sizeof(start_sequence)+packet_size;
151                 } else {
152                     av_log(NULL, AV_LOG_ERROR, "H.264/RTP Unable to allocate memory for extradata!");
153                 }
154             }
155         }
156         av_log(NULL, AV_LOG_DEBUG, "H.264/RTP Extradata set to %p (size: %d)!", codec->extradata, codec->extradata_size);
157     }
158 }
159
160 // return 0 on packet, no more left, 1 on packet, 1 on partial packet...
161 static int h264_handle_packet(RTPDemuxContext * s,
162                               AVPacket * pkt,
163                               uint32_t * timestamp,
164                               const uint8_t * buf,
165                               int len)
166 {
167 #ifdef DEBUG
168     h264_rtp_extra_data *data = s->dynamic_protocol_context;
169 #endif
170     uint8_t nal = buf[0];
171     uint8_t type = (nal & 0x1f);
172     int result= 0;
173     uint8_t start_sequence[]= {0, 0, 1};
174
175     assert(data);
176     assert(data->cookie == MAGIC_COOKIE);
177     assert(buf);
178
179     if (type >= 1 && type <= 23)
180         type = 1;              // simplify the case. (these are all the nal types used internally by the h264 codec)
181     switch (type) {
182     case 0:                    // undefined;
183         result= -1;
184         break;
185
186     case 1:
187         av_new_packet(pkt, len+sizeof(start_sequence));
188         memcpy(pkt->data, start_sequence, sizeof(start_sequence));
189         memcpy(pkt->data+sizeof(start_sequence), buf, len);
190 #ifdef DEBUG
191         data->packet_types_received[nal & 0x1f]++;
192 #endif
193         break;
194
195     case 24:                   // STAP-A (one packet, multiple nals)
196         // consume the STAP-A NAL
197         buf++;
198         len--;
199         // first we are going to figure out the total size....
200         {
201             int pass= 0;
202             int total_length= 0;
203             uint8_t *dst= NULL;
204
205             for(pass= 0; pass<2; pass++) {
206                 const uint8_t *src= buf;
207                 int src_len= len;
208
209                 do {
210                     uint16_t nal_size = AV_RB16(src); // this going to be a problem if unaligned (can it be?)
211
212                     // consume the length of the aggregate...
213                     src += 2;
214                     src_len -= 2;
215
216                     if (nal_size <= src_len) {
217                         if(pass==0) {
218                             // counting...
219                             total_length+= sizeof(start_sequence)+nal_size;
220                         } else {
221                             // copying
222                             assert(dst);
223                             memcpy(dst, start_sequence, sizeof(start_sequence));
224                             dst+= sizeof(start_sequence);
225                             memcpy(dst, src, nal_size);
226 #ifdef DEBUG
227                             data->packet_types_received[*src & 0x1f]++;
228 #endif
229                             dst+= nal_size;
230                         }
231                     } else {
232                         av_log(NULL, AV_LOG_ERROR,
233                                "nal size exceeds length: %d %d\n", nal_size, src_len);
234                     }
235
236                     // eat what we handled...
237                     src += nal_size;
238                     src_len -= nal_size;
239
240                     if (src_len < 0)
241                         av_log(NULL, AV_LOG_ERROR,
242                                "Consumed more bytes than we got! (%d)\n", src_len);
243                 } while (src_len > 2);      // because there could be rtp padding..
244
245                 if(pass==0) {
246                     // now we know the total size of the packet (with the start sequences added)
247                     av_new_packet(pkt, total_length);
248                     dst= pkt->data;
249                 } else {
250                     assert(dst-pkt->data==total_length);
251                 }
252             }
253         }
254         break;
255
256     case 25:                   // STAP-B
257     case 26:                   // MTAP-16
258     case 27:                   // MTAP-24
259     case 29:                   // FU-B
260         av_log(NULL, AV_LOG_ERROR,
261                "Unhandled type (%d) (See RFC for implementation details\n",
262                type);
263         result= -1;
264         break;
265
266     case 28:                   // FU-A (fragmented nal)
267         buf++;
268         len--;                  // skip the fu_indicator
269         {
270             // these are the same as above, we just redo them here for clarity...
271             uint8_t fu_indicator = nal;
272             uint8_t fu_header = *buf;   // read the fu_header.
273             uint8_t start_bit = fu_header >> 7;
274 //            uint8_t end_bit = (fu_header & 0x40) >> 6;
275             uint8_t nal_type = (fu_header & 0x1f);
276             uint8_t reconstructed_nal;
277
278             // reconstruct this packet's true nal; only the data follows..
279             reconstructed_nal = fu_indicator & (0xe0);  // the original nal forbidden bit and NRI are stored in this packet's nal;
280             reconstructed_nal |= nal_type;
281
282             // skip the fu_header...
283             buf++;
284             len--;
285
286 #ifdef DEBUG
287             if (start_bit)
288                 data->packet_types_received[nal_type]++;
289 #endif
290             if(start_bit) {
291                 // copy in the start sequence, and the reconstructed nal....
292                 av_new_packet(pkt, sizeof(start_sequence)+sizeof(nal)+len);
293                 memcpy(pkt->data, start_sequence, sizeof(start_sequence));
294                 pkt->data[sizeof(start_sequence)]= reconstructed_nal;
295                 memcpy(pkt->data+sizeof(start_sequence)+sizeof(nal), buf, len);
296             } else {
297                 av_new_packet(pkt, len);
298                 memcpy(pkt->data, buf, len);
299             }
300         }
301         break;
302
303     case 30:                   // undefined
304     case 31:                   // undefined
305     default:
306         av_log(NULL, AV_LOG_ERROR, "Undefined type (%d)", type);
307         result= -1;
308         break;
309     }
310
311     return result;
312 }
313
314 /* ---------------- public code */
315 static void *h264_new_extradata(void)
316 {
317     h264_rtp_extra_data *data =
318         av_mallocz(sizeof(h264_rtp_extra_data) +
319                    FF_INPUT_BUFFER_PADDING_SIZE);
320
321     if (data) {
322         data->cookie = MAGIC_COOKIE;
323     }
324
325     return data;
326 }
327
328 static void h264_free_extradata(void *d)
329 {
330     h264_rtp_extra_data *data = (h264_rtp_extra_data *) d;
331 #ifdef DEBUG
332     int ii;
333
334     for (ii = 0; ii < 32; ii++) {
335         if (data->packet_types_received[ii])
336             av_log(NULL, AV_LOG_DEBUG, "Received %d packets of type %d\n",
337                    data->packet_types_received[ii], ii);
338     }
339 #endif
340
341     assert(data);
342     assert(data->cookie == MAGIC_COOKIE);
343
344     // avoid stale pointers (assert)
345     data->cookie = DEAD_COOKIE;
346
347     // and clear out this...
348     av_free(data);
349 }
350
351 static int parse_h264_sdp_line(AVStream * stream, void *data,
352                                const char *line)
353 {
354     AVCodecContext *codec = stream->codec;
355     h264_rtp_extra_data *h264_data = (h264_rtp_extra_data *) data;
356     const char *p = line;
357
358     assert(h264_data->cookie == MAGIC_COOKIE);
359
360     if (strstart(p, "framesize:", &p)) {
361         char buf1[50];
362         char *dst = buf1;
363
364         // remove the protocol identifier..
365         while (*p && *p == ' ') p++; // strip spaces.
366         while (*p && *p != ' ') p++; // eat protocol identifier
367         while (*p && *p == ' ') p++; // strip trailing spaces.
368         while (*p && *p != '-' && (buf1 - dst) < sizeof(buf1) - 1) {
369             *dst++ = *p++;
370         }
371         *dst = '\0';
372
373         // a='framesize:96 320-240'
374         // set our parameters..
375         codec->width = atoi(buf1);
376         codec->height = atoi(p + 1); // skip the -
377         codec->pix_fmt = PIX_FMT_YUV420P;
378     } else if (strstart(p, "fmtp:", &p)) {
379         char attr[256];
380         char value[4096];
381
382         // remove the protocol identifier..
383         while (*p && *p == ' ') p++; // strip spaces.
384         while (*p && *p != ' ') p++; // eat protocol identifier
385         while (*p && *p == ' ') p++; // strip trailing spaces.
386
387         /* loop on each attribute */
388         while (rtsp_next_attr_and_value
389                (&p, attr, sizeof(attr), value, sizeof(value))) {
390             /* grab the codec extra_data from the config parameter of the fmtp line */
391             sdp_parse_fmtp_config_h264(stream, h264_data, attr, value);
392         }
393     } else if (strstart(p, "cliprect:", &p)) {
394         // could use this if we wanted.
395     }
396
397     av_set_pts_info(stream, 33, 1, 90000);      // 33 should be right, because the pts is 64 bit? (done elsewhere; this is a one time thing)
398
399     return 0;                   // keep processing it the normal way...
400 }
401
402 /**
403 This is the structure for expanding on the dynamic rtp protocols (makes everything static. yay!)
404 */
405 RTPDynamicProtocolHandler ff_h264_dynamic_handler = {
406     "H264",
407     CODEC_TYPE_VIDEO,
408     CODEC_ID_H264,
409     parse_h264_sdp_line,
410     h264_new_extradata,
411     h264_free_extradata,
412     h264_handle_packet
413 };