X-Git-Url: http://rtime.felk.cvut.cz/gitweb/fpga/virtex2/uart.git/blobdiff_plain/18168561d4ba83c72a2bb46379eed51551045138..e4d439f4b7c5af4364f93911c067d72627326e37:/software/README.txt

diff --git a/software/README.txt b/software/README.txt
deleted file mode 100644
index 79c251c..0000000
--- a/software/README.txt
+++ /dev/null
@@ -1,47 +0,0 @@
-what's this?
-------------
-it's a simple example project for the MSP430 series MCU and the GCC port
-of the mspgcc project. the project contains a makefile and uses assembler
-and C sources. this time it is a software UART with Timer_A.
-
-this example shows the following features:
- - Timer_A uart, full duplex
-    o same pins as BSL (P1.1 TX, P2.2 RX)
-    o it contains a reusable code
-
- - software FLL
-   the watch crystal is used as reference and the main clock
-   is adjusted to 1.536MHz on startup
-
- - use uprintf to print formated strings and do a printf
-   emulation that prints to the serial port.
-
- - the main loop is a simple line editor. when a return character
-   ('\r', usualy RETURN key) is received, it writes the received
-   characters from the buffer to the serial port.
-   connect a terminal at 9600,N,8,1 to try it out.
-
- - makefile
-    o compile and link
-    o include assembler files
-    o convert to intel hex format
-    o generate a listing with mixed C / assembly
-
-required hardware
------------------
-
- - a MSP430F1121 or larger device (any from the F1x series)
-   connect pins P1.1 (TX) and P2.2 (RX) through level converters
-   to a terminal. you can also use a BSL hardware, the same pins
-   are used.
- 
- - watch crystal 32.768kHz
- 
- - optionaly a LED on P2.5  (470 Ohms series resistor to GND)
-
-disclaimer
-----------
-this example is part of the mspgcc project http://mspgcc.sf.net
-see license.txt for details.
-
-chris
\ No newline at end of file