The Barebox, AT91Bootstrap and Linux patches for the Calao QIL A9260
board are all located in the same directory, board/calao/qil-a9260/,
with only a prefix to indicate to which component they apply.
Unfortunately, since commit 0eba4759fab9d093afacac77a0ac31f1f0b3cceb
("packages: apply custom patches using *.patch instead of
<pkg>-*.patch"), the logic to apply custom patches in Barebox and
AT91Bootstrap has been changed from applying <package>-*.patch to
applying *.patch (in order to be consistent with what we do for all
packages in Buildroot).
However, this had the effect of trying to apply both the AT91Bootstrap
and Barebox patches on both packages, which obviously cannot work.
This commit fixes that by moving patches around, and switching to use
BR2_GLOBAL_PATCH_DIR for all of Barebox, AT91Bootstrap and Linux
patches.
In addition, the defconfig was not specifying explicitly which Barebox
version to use, so right now it's trying to use Barebox 2015.09, on
which the board-specific patch does not apply. So we've forced to use
Barebox 2012.08, which was the lastest release available at the time
the defconfig was initially contributed.
Cc: Gregory Hermant <gregory.hermant@calao-systems.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
configs: fix build of calao_usb_a9g20_lpw_defconfig
Both the Barebox and AT91Bootstrap patches for the Calao USB A9G20
board are located in the same directory, board/calao/usb-a9g20-lpw/,
with only a prefix making a difference between whether they apply to
Barebox or AT91Bootstrap.
Unfortunately, since commit 0eba4759fab9d093afacac77a0ac31f1f0b3cceb
("packages: apply custom patches using *.patch instead of
<pkg>-*.patch"), the logic to apply custom patches in Barebox and
AT91Bootstrap has been changed from applying <package>-*.patch to
applying *.patch (in order to be consistent with what we do for all
packages in Buildroot).
However, this had the effect of trying to apply both the AT91Bootstrap
and Barebox patches on both packages, which obviously cannot work.
This commit fixes that by moving patches around, and switching to use
BR2_GLOBAL_PATCH_DIR.
Cc: Gregory Hermant <gregory.hermant@calao-systems.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This defconfig tries to fetch its kernel source code and U-Boot source
code from gitorious.org, which is not longer available. Therefore,
this defconfig has been failing to build since quite some time. Since
there's no obvious other place to grab the kernel and u-boot source
code, and the defconfig was not updated since a long time, let's
simply get rid of it.
[Peter: also drop README] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit b0f025386f6861fdc21e38e3a33b65669276f2c2 a patch was added
to make sure that python-numpy does work in uClibc. This patch was
needed for the x86 architecture, because uClibc in fact does support
fenv for x86. However, we don't turn on this support in our uClibc
config. Because the Config.in depends still allowed uClibc for x86,
this lead to a built failure, which lead to the fix in commit b0f02538.
But since this fix also fixes it for all other (supported)
architectures, we can just remove the !uClibc dependency completely.
This is also propagated to the reverse dependency in opencv3.
Aurélien Chabot [Sat, 3 Oct 2015 19:29:09 +0000 (21:29 +0200)]
nfs-utils: systemd support
nfs-utils has been patched to install only the needed systemd unit files
supported.
Also tmpfiles was needed because the folder /run/nfs is a tmpfs
and nfs-utils need some files to be there to work correctly.
Signed-off-by: Aurélien Chabot <aurelien@chabot.fr>
[Maxime: Remove patches included originally in the patch as they have
have been merged upstream in v1.3.3]
Signed-off-by Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
[Thomas:
- add comment in nfs-utils_env.sh to explain why an empty script is
needed.
- remove incorrect indentation.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Matthias Weisser [Tue, 11 Aug 2015 07:58:21 +0000 (09:58 +0200)]
squashfs: Add lz4 hc compression
lz4 offers a high compression mode. A minimalistic file system shrinks by about 15%.
[Peter: Unconditionally use hc mode for lz4 instead of introducing another option] Signed-off-by: Matthias Weisser <m.weisser.m@gmail.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Max Filippov [Wed, 12 Aug 2015 22:20:01 +0000 (01:20 +0300)]
gcc: backport mauto-litpools xtensa option
With support from assembler this option allows compiling huge functions,
where single literal pool at the beginning of a function may not be
reachable by L32R instructions at its end.
Currently assembler --auto-litpools option cannot deal with literals
used from multiple locations separated by more than 256 KBytes of code.
Don't turn constants into literals, instead use MOVI instruction to load
them into registers and let the assembler turn them into literals as
necessary.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Max Filippov [Wed, 12 Aug 2015 22:20:00 +0000 (01:20 +0300)]
binutils: backport auto-litpools xtensa gas option
Auto-litpools is the automated version of text-section-literals: literal
pool candidate frags are planted every N frags and during relaxation
they are turned into actual literal pools where literals are moved to
become reachable for their first reference by L32R instruction.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
gcc: remove the --with-pkgversion option from the ccache hash
One of the gcc configure options that we hash for ccache is
--with-pkgversion which is set to something like Buildroot 2015.11-git-00426-ge7e7e4f - i.e., it will change with every buildroot
commit. That's obviously not wanted, so substitute this away.
Also add a \n to the printf so the output is a bit more readable.
[Peter: update documentation to match] Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When building in a different output directory than the original build,
there will currently be a lot of ccache misses because in many cases
there is some -I/... absolute path in the compilation. Ccache has an
option CCACHE_BASEDIR to substitute absolute paths with relative paths,
so they wil be the same in the hash (and in the output).
Since there are some disadvantages to this path rewriting, it is made
optional as BR2_CCACHE_USE_BASEDIR. It defaults to y because the
usefulness of ccache is severely reduced without this option.
In addition to CCACHE_BASEDIR, we also substitute away the occurences
of $(HOST_DIR) in the calculation of the compiler hash. This is done
regardless of the setting of BR2_CCACHE_USE_BASEDIR because it's
quite harmless.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ccache: use mtime for external toolchain, CONF_OPTS for internal toolchain
Our current ccache disables hashing of the compiler executable itself,
because using the default 'mtime' doesn't work in buildroot: we always
rebuild the compiler, so the mtime is always different, so the cache
always misses.
However, in the current situation, if a user changes the compiler
configuration (which would result in the compiler generating different
object files than before) and does 'make clean all', ccache may in fact
reuse object files from the previous run. This rarely gives problems,
because
(1) the cache expires quite quickly (it's only 1GB by default),
(2) radically changing compiler options will cause cache misses because
different header files are used,
(3) many compiler changes (e.g. changing -mtune) have little practical
effect because the resulting code is usually still compatible,
(4) we currently don't use CCACHE_BASEDIR, and almost all object files
will contain an absolute path (e.g. in debug info), so when
building in a different directory, most of it will miss,
(5) we do mostly build test, and many of the potential problems only
appear at runtime.
Still, when ccache _does_ use the wrong cached object files, the
effects are really weird and hard to debug. Also, we want reproducible
builds and obviously the above makes builds non-reproducible. So we
have a FAQ entry that warns against using ccache and tells the user to
clear the cache in case of problems.
Now that ccache is called from the toolchain wrapper, it is in fact
possible to at least use the 'mtime' compiler hash for the external
toolchain and for the host-gcc. Indeed, in this case, the compiler
executable comes from a tarball so the mtime will be a good reference
for its state. Therefore, the patch (sed script) that changes the
default from 'mtime' to 'none' is removed.
For the internal toolchain, we can do better by providing a hash of
the relevant toolchain options. We are only interested in things that
affect the compiler itself, because ccache also processes the header
files and it doesn't look at libraries because it doesn't cache the
link step, just compilation. Everything that affects the compiler
itself can nicely be summarised in $(HOST_GCC_FINAL_CONF_OPTS). Of
course, also the compiler source itself is relevant, so the source
tarball and all the patches are included in the hash. For this purpose,
a new HOST_GCC_XTENSA_OVERLAY_TAR is introduced.
The following procedure tests the ccache behaviour:
Use this defconfig:
BR2_arm=y
BR2_CCACHE=y
make
readelf -A output/build/uclibc-1.0.6/libc/signal/signal.os
-> Tag_CPU_name: "ARM926EJ-S"
Now make menuconfig, change variant into BR2_cortex_a9
make clean; make
readelf -A output/build/uclibc-1.0.6/libc/signal/signal.os
-> Tag_CPU_name: "ARM926EJ-S"
should be "Cortex-A9"
After this commit, it is "Cortex-A9".
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Cc: Danomi Manchego <danomimanchego123@gmail.com> Cc: Károly Kasza <kaszak@gmail.com> Cc: Samuel Martin <s.martin49@gmail.com> Cc: Romain Naour <romain.naour@openwide.fr> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
package-cmake: remove now-redundant target ccache support
All the complexity with the different ways that CMAKE_C_COMPILER and
CMAKE_C_COMPILER_ARG1 can be set are no longer needed, it's all handled
by the toolchain wrapper now.
Note that it is still necessary to handle this for the host build.
infra: move ccache handling to the toolchain wrapper
Since we always have a toolchain wrapper now, we can move the ccache
call to the toolchain wrapper.
The hostcc ccache handling obviously stays.
The global addition of ccache to TARGET_CC/CXX is removed, but many
individual packages and infras still add it. This means we have a
chain like this: ccache -> toolchain-wrapper -> ccache -> gcc
However, this is fairly harmless: for cache misses, the inner ccache
just adds overhead and for cache hits, the inner ccache is never
called. Later patches will remove these redundant ccache calls.
As a side effect, perl now supports ccache as well.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Cc: Danomi Manchego <danomimanchego123@gmail.com> Cc: Károly Kasza <kaszak@gmail.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gcc: remove unsafe patch check (poison system dirs) patch
Now that the calls to gcc always pass through the toolchain wrapper, it
is no longer necessary to patch gcc to support poisoning.
This does have the disadvantage that there is no unsafe path check for
libc, libgcc and libstdc++ (all of these are built before the wrapper
exists). But we can assume that the toolchain components themselves
should be pretty safe.
We have a toolchain wrapper for external toolchain, but it is also
beneficial for internal toolchains, for the following reasons:
1. It can make sure that BR2_TARGET_OPTIMIZATION is passed to the
compiler even if a package's build system doesn't honor CFLAGS.
2. It allows us to do the unsafe path check (i.e. -I/usr/include)
without patching gcc.
3. It makes it simpler to implement building each package with a
separate staging directory (per-package staging).
4. It makes it simpler to implement a compiler hash check for ccache.
The wrapper is reused from the external toolchain. A third CROSS_PATH_
option is added to the wrapper: in this case, the real executable is in
the same directory, with the extension .real.
The creation of the simple symlinks is merged with the creation of the
wrapper symlinks, otherwise part of the -gcc-ar handling logic would
have to be repeated.
The complex case-condition could be refactored with the one for the
external toolchain, but then it becomes even more complex because
they each have special corner cases. For example, the internal
toolchain has to handle *.real to avoid creating an extra indirection
after host-gcc-{final,initial}-rebuild.
Instead of creating the .real files, it would also have been possible
to install the internal toolchain in $(HOST_DIR)/opt, similar to what
we do for the external toolchain. However, then we would also have to
copy things to the sysroot and do more of the magic that the external
toolchain is doing. So keeping it in $(HOST_DIR)/usr/bin is much
simpler.
Note that gcc-initial has to be wrapped as well, because it is used for
building libc and we want to apply the same magic when building libc.
toolchain-external: move wrapper to toolchain directory
The toolchain wrapper will be reused for the internal toolchain, so it
belongs in the toolchain directory. Also, the ext- prefix is removed
from it. The build commands are moved to a new toolchain-wrapper.mk.
The wrapper arguments that are also relevant for the internal toolchain
wrapper are moved to toolchain-wrapper.mk, the rest stays in
toolchain-external.mk.
While we're at it, move the building of the toolchain wrapper to the
build step of toolchain-external. There is no specific reason to do
this, other than that it fits better semantically. Also remove the
MESSAGE call, otherwise we'd see:
>>> toolchain-external undefined Building
>>> toolchain-external undefined Building toolchain wrapper
/usr/bin/gcc ...
Having an extra "Building toolchain wrapper' message is pointless.
The useless condition on $(BR2_TARGET_OPTIMIZATION) is removed. It was
always true because it wasn't qstrip'ped first, so clearly it works
without that condition as well.
Also rewrapped some comments and removed the 'external' reference.
Luca Ceresoli [Sat, 3 Oct 2015 21:18:18 +0000 (23:18 +0200)]
legal-info: allow to declare the actual sources for binary packages
The FOO_SITE/FOO_SOURCE variables usually point to a tarball containing
source code.
For the downloaded external toolchains this is not true, the "source"
tarball actually contains binaries. This is fine for making Buildroot
work, but for legal-info we really want to ship real source code, not
binaries.
Luckily, some (hopefully all) toolchain vendors publish a downloadable
tarball containing the source code counterpart for their binary
packages.
Here we allow the user to declare the URL of this other tarball in the
pair of variables FOO_ACTUAL_SOURCE_TARBALL (by default equal to
FOO_SOURCE) and FOO_ACTUAL_SOURCE_SITE (by default equal to FOO_SITE).
If the "actual source" package can be downloaded from the same
directory as the binary package, then only FOO_ACTUAL_SOURCE_TARBALL
needs to be set.
Note this change is not strictly toolchain-specific: it might be useful
for other packages that happen to ship binaries in the same way.
[Thomas:
- remove "the source code has not been saved" warning that could
never be triggered due to how the conditions were
organized. Discussed with Luca live during the meeting.]
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com> Cc: Arnout Vandecappelle <arnout@mind.be> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com> Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
----
v2 -> v3:
- Remove the select (not needed, we only have to propagate the
depends on) Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
eliminate double slashes caused by FOO_SITE ending in a slash
When a FOO_SITE variable ends in a slash and gets joined with a
FOO_SOURCE variable like $(FOO_SITE)/$(FOO_SOURCE), the resulting URI
has a double slash. While double-slashes are fine in unix paths, they
are reserved in URIs - the part following '//' must be an authority.
So let's ban trailing slashes entirely. They have all been removed in
a 7b0e757fb85fd, now add a check to error out loudly in case a new one
is added.
Example commands to test this check:
$ make busybox-dirclean busybox-source
rm -Rf /home/murray/devel/buildroot/output/build/busybox-1.23.2
busybox-1.23.2.tar.bz2: OK (md5: 7925683d7dd105aabe9b6b618d48cc73)
busybox-1.23.2.tar.bz2: OK (sha1: 7f37193cb249f27630e0b2a2c6c9bbb7b1d24c16)
$
$ make BUSYBOX_SITE=http://www.busybox.net/downloads/ busybox-dirclean busybox-source
rm -Rf /home/murray/devel/buildroot/output/build/busybox-1.23.2
BUSYBOX_SITE (http://www.busybox.net/downloads/) cannot have a trailing slash
make[1]: *** [/home/murray/devel/buildroot/output/build/busybox-1.23.2/.stamp_downloaded] Error 1
make: *** [_all] Error 2
$
Luca Ceresoli [Sat, 3 Oct 2015 17:22:16 +0000 (19:22 +0200)]
toolchain-external: strip trailing slash from autogenerated FOO_SITE
Trailing slashes are going to be declared illegal from FOO_SITE
variables.
But Buildroot internally generates such a variable when using a custom
external toolchain (i.e. BR2_TOOLCHAIN_EXTERNAL_CUSTOM). This is
because TOOLCHAIN_EXTERNAL_SITE is set to
$(dir $(call qstrip,$(BR2_TOOLCHAIN_EXTERNAL_URL))), and $(dir)
leaves a trailing slash.
Fix it using patsubst, just like linux and the bootloaders do.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Arnout Vandecappelle <arnout@mind.be> Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Virtualizer Development Kits (VDKs) are software development kits
containing design-specific virtual prototypes as well as debug and
analysis tools and sample software.
With this change we add support for VDK based on ARC HS38 core.
Note that FS-overlay is required to allow instantiation of console on
both serial port and LCD screen simultaneously.
Cc: Peter Korsgaard <peter@korsgaard.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The 0001-CMakeLists-add-rules-for-installation.patch patch has been
merged upstream 7 minutes after it was submitted. So let's bump to the
latest upstream version and drop the no longer needed patch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ZXing was hosted on Google Code, which is a closing. The current link
was already redirecting to the github repo.
But upstream is no longer supporting the cpp bindings, it's now a Java
library/application.
A fork has been created from the latest cpp source of the original
upstream. So this commit creates a new package, zxing-cpp, and adds
Config.in.legacy handling for the old zxing pakcage that is removed.
[Thomas:
- add a patch that improves the CMakeLists.txt file to add
installation rules. This allows to remove the manual installation
logic from zxing-cpp.mk.
- make libiconv a normal optional dependency. No need to involve
BR2_ENABLE_LOCALE in the condition, since libiconv can only be
enabled when !BR2_ENABLE_LOCALE.
- bump to the latest upstream version.
- add hash file.]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yann E. MORIN [Sun, 4 Oct 2015 12:08:18 +0000 (13:08 +0100)]
package/freerdp: needs C++
FreeRDP does not have a single C++ source file, however it insists on
having a C++ compiler. Removing that requirement is a bit too much
involving, so we just depend on it...
Yann E. MORIN [Sun, 4 Oct 2015 10:22:35 +0000 (11:22 +0100)]
package/freerdp: fix missing define
FreeRDP uses CMSPAR, which is defined by glibc in bits/termios.h .
glibc has two flavours of bits/termios.h: a genmeric one and an
architecture-specific one. When installing, glibc will install the
architecture-specific file if it exists, otherwise it installs the
generic file. Only Alpha, MIPS, PPC and Sparc have their own
bits/termios.h.
The generic bits/termios.h, as well as the Alpha, PPC and Sparc flavours
do define CMSPAR. However, the MIPS flavour does not define it.
We add a patch to FreeRDP that defines CMSPAR to the value from the
generic value, which is also the value known to the Linux kernel for
MIPS.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Peter Korsgaard <jacmet@uclibc.org> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by Maxime Hadjinlian <maxime.hadjinlian@gmail.com> Reported-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bernd Kuhls [Sat, 3 Oct 2015 19:59:53 +0000 (21:59 +0200)]
package/mesa3d: bump to version 11.0.2
Mesa3d 10.6.x is reaching end-of-life:
http://lists.freedesktop.org/archives/mesa-announce/2015-October/000178.html
"NOTE: It is anticipated that 10.6.9 will be the final release in the
10.6 series. Users of 10.6 are encouraged to migrate to the 11.0 series
in order to obtain future fixes."
Run-time testing with Kodi Isengard on an Intel GPU was positive.
Luca Ceresoli [Sun, 4 Oct 2015 09:43:35 +0000 (11:43 +0200)]
system: clarify /dev management using devtmpfs + {mdev, eudev}
The "Dynamic using mdev" and "Dynamic using eudev" /dev management
methods are using devtmpfs, just like "Dynamic using devtmpfs only",
on top of which they add either mdev or eudev. But their names might
suggest they use mdev only or eudev only.
Clarify their descriptions by adding "devtmpfs +" to make it
unambiguous.
[Thomas: rewrap the paragraphs in the manual. It makes the diff a lot
less readable, but we actually want the result to be wrapped.]
Stephen Agate [Mon, 31 Aug 2015 21:50:47 +0000 (22:50 +0100)]
host-localdef fails under gcc5
Building host-localdef fails under gcc5.1 reporting multiple definitions and undefined references:
argp-help.o: In function `argp_fmtstream_write':
argp-help.c:(.text+0x1dc0): multiple definition of `argp_fmtstream_write'
argp-fmtstream.o:argp-fmtstream.c:(.text+0x750): first defined here
argp-help.o: In function `argp_fmtstream_puts':
argp-help.c:(.text+0x1e10): multiple definition of `argp_fmtstream_puts'
argp-fmtstream.o:argp-fmtstream.c:(.text+0x810): first defined here
argp-help.o: In function `argp_fmtstream_putc':
argp-help.c:(.text+0x1e80): multiple definition of `argp_fmtstream_putc'
argp-fmtstream.o:argp-fmtstream.c:(.text+0x7b0): first defined here
argp-help.o: In function `argp_fmtstream_set_lmargin':
argp-help.c:(.text+0x1ed0): multiple definition of `argp_fmtstream_set_lmargin'
argp-fmtstream.o:argp-fmtstream.c:(.text+0x590): first defined here
argp-help.o: In function `argp_fmtstream_set_rmargin':
argp-help.c:(.text+0x1f00): multiple definition of `argp_fmtstream_set_rmargin'
argp-fmtstream.o:argp-fmtstream.c:(.text+0x5c0): first defined here
argp-help.o: In function `argp_fmtstream_set_wmargin':
argp-help.c:(.text+0x1f30): multiple definition of `argp_fmtstream_set_wmargin'
argp-fmtstream.o:argp-fmtstream.c:(.text+0x5f0): first defined here
argp-help.o: In function `argp_fmtstream_point':
argp-help.c:(.text+0x1f60): multiple definition of `argp_fmtstream_point'
argp-fmtstream.o:argp-fmtstream.c:(.text+0x620): first defined here
charmap.o: In function `cmlr_open.constprop.2':
charmap.c:(.text+0x230a): undefined reference to `charmap_hash'
charmap.o: In function `charmap_read':
charmap.c:(.text+0x2397): undefined reference to `charmap_hash'
locfile.o: In function `locfile_read':
locfile.c:(.text+0x2e4): undefined reference to `locfile_hash'
locfile.c:(.text+0x8f4): undefined reference to `locfile_hash'
locfile.c:(.text+0x9b3): undefined reference to `locfile_hash'
locfile.c:(.text+0xa36): undefined reference to `locfile_hash'
collect2: error: ld returned 1 exit status
Makefile:58: recipe for target 'localedef' failed
ibrdtn-tools: fix linking problem when building statically
The problem looks like this:
/br/output/host/usr/mipsel-buildroot-linux-uclibc/sysroot/usr//lib/librt.a(timer_routines.os):
In function `__start_helper_thread':
timer_routines.c:(.text+0x2f4): undefined reference to `pthread_atfork'
collect2: error: ld returned 1 exit status
Bernd Kuhls [Sat, 3 Oct 2015 21:19:55 +0000 (23:19 +0200)]
package/pixman: bump version to 0.32.8
[Peter: fix .hash comment as pointed out by Vincent] Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Our previous patch to disable the documentation in gdb wasn't complete.
There are cases where the documentation under bfd and gprof directories
is being built, causing the subsequent failure due to missing makeinfo.
This patch fixes that problem.
[Peter: needs GCC >= 4.7 for C+11, no need to install in target,
Drop TARGET_CONFIGURE_OPTS, add TARGET_CXXFLAGS, wrap long lines] Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Scott Fan [Thu, 30 Jul 2015 22:59:07 +0000 (00:59 +0200)]
xdriver_xf86-video-fbturbo: new package
Add the fbturbo video driver, which is based on xf86-video-fbdev (with
none of the original features stripped), primarily optimized for the
devices powered by the Allwinner SoC (A10, A13, A20).
https://github.com/ssvb/xf86-video-fbturbo/
Signed-off-by: Scott Fan <fancp2007@gmail.com>
[yann.morin.1998@free.fr: strip help text to the basics only]
[Peter: needs libdrm/pixman, add patch to drop libdri2 dependency
reformat and add optional libpciaccess support] Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Carlos Santos [Fri, 31 Jul 2015 11:53:42 +0000 (08:53 -0300)]
gmock: new package
Inspired by jMock, EasyMock, and Hamcrest, and designed with C++'s
specifics in mind, Google C++ Mocking Framework (or Google Mock for
short) is a library for writing and using C++ mock classes.
Google Mock:
* lets you create mock classes trivially using simple macros,
* supports a rich set of matchers and actions,
* handles unordered, partially ordered, or completely ordered
expectations,
* is extensible by users, and
* works on Linux, Mac OS X, Windows, Windows Mobile, minGW, and
Symbian.
http://code.google.com/p/googlemock/
There are both host and target packages. The target one has include
files required to compile the tests and the static libraries required
to link/run them. The host package installs gmock_gen, a Python script
used to generate code mocks.
Notice that GMock 1.7.0 requires the Python 2 host package even if
Python 3 is selected as a target package.
Signed-off-by: Marcelo Barbosa <marcelo.barbosa@datacom.ind.br> Signed-off-by: Carlos Santos <casantos@datacom.ind.br> Reviewed-by: Romain Naour <romain.naour@openwide.fr> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
swupdate provides a reliable way to update the software on an embedded system.
Note that swupdates has a reworked Kbuild/Kconfig system. It has now support
for the 'option' and 'env' symbols as well for the 'savedefconfig' target.
This makes dependency handling much easier. We're now able to pass which
dependencies are available through the environment, as suggested by Arnout
Vandecappelle [1].
In previous version of this patch we had a configuration setting where all
package dependencies except Lua were selected by default. This has changed with
v7 as we are now able to pass dependencies to the swupdate build system through
the environment. For useful operation swupdate requires a parser which depends
by default on libconfig, but can be replaced by a json-c or Lua parser.
To provide a reasonable firmware update system we enable the embedded webserver
based on mongoose (also see notes about mongoose below), a parser as stated
above and a handler for raw NAND or NOR flash.
The user can modify this configuration by selecting the appropriate dependencies
before running `make swupdate-menuconfig`. The help text contains information
about which packages may be of interest for the user.
The embedded web server requires a website for proper operation. We install the
included website by default, however the user may choose to install a custom
website on the post-build scripts.
Note, swupdate includes some old versions of mongoose and lsqlite3:
- mongoose is version 3.8 from year 2013
- lsqlite3 is version 0.8 from year 2011
Currently, swupdate does not provide a way to replace these with external
packages.
This patch is based on a WIP version submitted by Romain Naour, commented by
Arnout Vandecappelle [2].
skeleton: fix absence of /dev/shm on static, read-only systems
/dev/shm is needed for systems using shared memory. On init-based systems
this directory is usually created in the inittab along with /dev/pts, by
the lines:
busybox: inittab: don't redirect output to /dev/null
Several inittab steps are redirected to /dev/null. This means any error or
warning printed by these crucial commands would be hidden from the user.
There is no evident reason to hide this output, so stop doing that.
Suggested by Thomas Petazzoni:
http://lists.busybox.net/pipermail/buildroot/2015-September/139146.html
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
valgrind: build for the right MIPS ISA revision level
When Valgrind detects a 32-bit MIPS architecture, it forcibly adds
-march=mips32 to CFLAGS; when it detects a 64-bit MIPS architecture, it
forcibly adds -march=mips64. This causes Valgrind to be built always for
the first ISA revision level (R1), even when the user has configured
Buildroot for the second ISA revision level (R2).
Since R2 is backwards compatible with R1, you can run a Valgrind built
for R1 in an R2 core. This is why nobody noticed about this problem, or
at least nobody complained.
But, since (I hope) we will support R6 in Buildroot in the near future,
this problem will become very important because R6 is not backwards
compatible with R1 or R2, so building Valgrind for R1 when your target
is R6 will result in a non-working Valgrind.
Override the CFLAGS variable (which Valgrind appends to its CFLAGS) and
pass the right -march option, so they take precedence over Valgrind's
wrongfully detected value.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com> Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The default is $PREFIX/libexec which ends up in an ugly and non-standard
/libexec dir in the target.
Move it to $PREFIX/lib/dhcpcd which is far more nicer and suitable.
Making the getty option a menuconfig instead of a simple config
automatically moves its dependees into a menu without the need to
manually declare such a menu.
projects / coffee / buildroot.git / log