It seems mono isn't supported for sparc32, see configure.ac
for some comments about it. Tried with sparc64, but this
doesn't compile either.
So disable for sparc for now.
Fixes following autobuild issues:
http://autobuild.buildroot.org/?reason=mono-4.2.2.30
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Brian Kim [Tue, 19 Apr 2016 08:35:35 +0000 (17:35 +0900)]
board: add support for Hardkernel ODROID-C2 Board
The ODROID-C2 is a 64-bit quad-core single board computer(SBC) that is
one of the most cost-effective 64bit development boards available in the
ARM world.
[Peter: fix typos, drop neon/C++ settings, use git hash for Linux/U-Boot] Signed-off-by: Brian Kim <brian.kim@hardkernel.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Fri, 22 Apr 2016 21:51:10 +0000 (23:51 +0200)]
shared-mime-info: add patch to fix parallel installation issue
This commit adds a patch that should fix the parallel installation. A
similar patch is used by the Yocto Project, and they have already
submitted it upstream.
Thomas Petazzoni [Wed, 20 Apr 2016 21:10:13 +0000 (23:10 +0200)]
binutils: remove 2.22 hash
In commit 2f8459539401938a4ec4fe5f4a207c5d81f2cf74 ("binutils: remove
version 2.22"), binutils 2.22 was removed, but forgot to remove the
corresponding hash from the hash file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Maxime Coquelin [Fri, 22 Apr 2016 12:59:37 +0000 (14:59 +0200)]
elf2flt: Update version to fix buffer overflow in output_relocs()
This new version contains a patch that fixes the following crash:
make[1]: Entering directory `<...>/build/uclibc-1.0.14'
CC utils/getconf
*** buffer overflow detected ***: <...>/bin/elf2flt terminated
toolchain-external: remove unused calculation of ARCH_SUBDIR
In TOOLCHAIN_EXTERNAL_INSTALL_TARGET_LIBS, ARCH_SUBDIR is calculated but not
used, and can thus be removed. Since SYSROOT_DIR is only used for the
calculation of ARCH_SUBDIR, it can be removed too.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com> Reviewed-by: Romain Naour <romain.naour@gmail.com> Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
weston: disable v4l simple dmabuf for headers < 3.8
It uses VIDIOC_EXPBUF which only came to light with kernel 3.8, so
disable it if headers are older. Fixes:
http://autobuild.buildroot.net/results/7fb/7fb9968b13f144c4576b28ecd01c82b74e4ed9d5/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
weston: add build fix for clock_gettime() in librt
Over time weston has been manually adding -lrt LDADDs to the Makefile
for clock_gettime() using sources. However this isn't 100% correct since
"modern" glibc versions don't require it so switch all over to a
configure test for that purpose. Fixes:
http://autobuild.buildroot.net/results/a16/a165f439cf5a81c79fe3fa3af7a2a5a30022e7ed/
Other projects, such as Linux [1] and U-Boot [2], use "technologic" for
this manufacturer. To be more consistent across all of them, rename the
board/ts folder to board/technologic.
Thomas Petazzoni [Thu, 21 Apr 2016 19:52:45 +0000 (21:52 +0200)]
i386: properly define BR2_ARCH for all x86 subarchitectures
We were not defining BR2_ARCH for two of the x86 subarchitecture,
which means the architecture part of the GNU_TARGET_NAME tuple was
empty, leading to weird build failures.
This commit fixes that by defining the appropriate values.
Fixes bug #8861.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Samuel Martin [Tue, 19 Apr 2016 21:49:01 +0000 (23:49 +0200)]
package/opencv: define modules inter-dependencies
OpenCV allows to enable/disable the selection of modules (a.k.a.
opencv libraries). These modules depend one on the others; these
dependencies are already handled by the build-system (CMake).
However, the way we handled them in Buildroot was not really clean.
For each opencv module, there is a kconfig option, but we forced the
corresponding CMake config option without checking for the modules'
dependencies.
For further details about the issues this situation was causing, refer
to this discussion [1].
This patch replicates the modules' dependency relations in the
Config.in, so that the selection of the user will actually be built.
This changes completes this work [2].
Samuel Martin [Tue, 19 Apr 2016 21:49:00 +0000 (23:49 +0200)]
support/scripts/check-host-rpath: also check HOST_DIR/{bin, sbin}
At least syslinux is installing stuff in HOST_DIR/sbin.
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Samuel Martin <s.martin49@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It makes icon lookups faster, though it's not strictly necessary.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
[Thomas: enclsoe the hook definition in the condition.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libgtk3: build gtk-encode-symbolic-svg for host variant
It's required to create the symbolic icons (RGBA/transparent) which some
apps like to use, like connman-gtk.
The added patch avoids the need for a full host-libgtk3 build which would
require host-libepoxy, host-mesa3d and a ton other deps.
And pull in host-librsvg so that we have the rsvg gdk-pixbuf loader
(plugin), otherwise scalable (svg) icons will error when trying to be
processed, like those provided by adwaita-icon-theme.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
core/pkg-download: ignore hashes from mirror for VCS downloads
When a download via a VCS method fails, Buildroot attempts the download
from the backup mirror (if any is set). Such a download is done with the
wget helper.
Given a package that has a .hash file for relase tarballs, which also
allows the user to use a random revision from a VCS, the normal download
wrapper will not check for hashes, on the assumption that maybe they are
not reproducible [*] (or user configurable).
However, when the download fails (for any reason: network error,
upstream removed the revision, old machine with incomplete set of CA
certificates...), the backup download now proceeds over with http (or
https) with the wget wrapper. The wget wrapper *always* checks for
hashes, and when a .hash file is present but no hash is found for the
download, this is considered an error.
However, when we download from the backup mirror for a main download that
should have been done with git/hq/svn/.., we in this situation have no hash
for the download. Thus, we should not fail on a missing hash for that
download. Same situation if a primary site is used.
Add a test for the site-method in the DOWNLOAD_INNER macro; if it was either
one of the VCS method, pass a one-off BR_NO_CHECK_HASH_FOR variable set to
contain the tarball to download.
Fixes issues like those reported by the Travis build bots:
https://travis-ci.org/buildroot/buildroot-defconfig-testing/jobs/123624879
[Peter: Move logic to beginning of DOWNLOAD_INNER so it also applies for BR2_PRIMARY_SITE] Reported-by: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
- rename BR2_TOOLCHAIN_BINUTILS_HAS_BUG_19405 to
BR2_TOOLCHAIN_HAS_BINUTILS_BUG_19405
- propagate to the qwt package, which is now selecting
BR2_PACKAGE_QT_GUI_MODULE.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Wed, 10 Feb 2016 23:03:10 +0000 (00:03 +0100)]
vpnc: simplify patch 0001
Patch 0001 that adjusts the Makefile to solve cross-compilation issues
does a lot of whitespace changes that are unnecessary. We remove all
those noisy changes to keep only the really interesting ones.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Wed, 10 Feb 2016 23:03:09 +0000 (00:03 +0100)]
vpnc: switch to github as the new site
The vpnc upstream project has not made any tarball release since many
years, but they have continued to update their Subversion
repository.
A Github repository synced with the Subversion repository now exists
at https://github.com/ndpgroup/vpnc, which is more practical to
generate patches and submit pull requests. For this reason, we move to
using this Github repository as the new source for the vpnc
package. The specific commit that we use corresponds to version 0.5.3
exactly.
All patches are re-formatted using Git.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Flannel is a virtual network that gives a subnet to each host for use
with container runtimes.
Cc: Brandon Philips <brandon.philips@coreos.com> Signed-off-by: Geoff Levand <geoff@infradead.org>
[Thomas:
- Don't select BR2_PACKAGE_HOST_GO since this option was removed.
- Take into account the rename of BR2_PACKAGE_GO_ARCH_SUPPORTS to
BR2_PACKAGE_HOST_GO_ARCH_SUPPORTS.
- Rewrap Config.in help text, it was slightly too large.
- Don't use the github function (the link was anyway incorrect), but
instead a direct link to the tarball, since the tarballs are
uploaded by the maintainers.
- Update the hash accordingly.
- Use $() to reference make variables and not ${}.
- Call the go compiler from $(HOST_DIR)/usr/bin, rather than from
HOST_GO_ROOT.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a new package 'go' which builds the host cross compiler and
libraries for the go programming language.
Signed-off-by: Geoff Levand <geoff@infradead.org>
[Thomas:
- Put the computation of GO_GOARM inside the ifeq ($(BR2_arm),y)
condition rather than duplicating this condition.
- Remove the GO_GOARCH=unknown case, since there is no way to fall in
this case as only supported architectures can use host-go.
- Remove the GO_GOARM=unknown case, since we are sure that only
ARMv5/6/7 will use host-go.
- Rename HOST_GO_FINAL to HOST_GO_ROOT, since it's really the "root"
of the Go installation.
- Remove visible Config.in.host option.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a new package go-bootstrap which builds a bootstrap compiler for the
go programming language.
Signed-off-by: Geoff Levand <geoff@infradead.org>
[Thomas:
- Rename GO_BOOTSTRAP_FINAL to HOST_GO_BOOTSTRAP_ROOT. Use the HOST_
prefix because this variable is specific to the host variant. And
it's not "final" at all, but rather the "root" of the Go Bootstrap
installation.
- Rename GO_BOOTSTRAP_MAKE_ENV to HOST_GO_BOOTSTRAP_MAKE_ENV, also to
have the HOST_ prefix because it's a host package.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
SQUID-2016:5 (CVE-2016-4051) - Buffer overflow in cachemgr.cgi
SQUID-2016:6 (CVE-2016-4052) - Multiple issues in ESI processing.
CVE-2016-4053 & CVE-2016-4054 which are part of SQUID-2016:6.
Switch to xz-compressed tarball as well.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Michel Marti [Fri, 8 Apr 2016 08:23:27 +0000 (10:23 +0200)]
tzdata: reorder zone list to avoid missing links
The 'backward' zone references entries from other zones (e.g. Pacific/*)
that have not yet been compiled, leading to missing links. To fix this,
take-over the zone list sort order from upstream 'tzdata' and also ensure
that make fails if zic terminates with a non-zero exit code.
Signed-off-by: Michel Marti <mma@objectxp.com> Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Julian Scheel [Thu, 17 Mar 2016 15:03:57 +0000 (16:03 +0100)]
cbootimage: new package
Add package for cbootimage host utility that is able to compile bct
files and generate flashable images out of a bct and an image for
tegra processors.
Signed-off-by: Julian Scheel <julian@jusst.de> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Julian Scheel [Thu, 17 Mar 2016 15:03:56 +0000 (16:03 +0100)]
tegrarcm: new package
Add package for the tegrarcm host utility that allows loading data to
tegra processors in recovery mode.
Signed-off-by: Julian Scheel <julian@jusst.de>
[Thomas: replace cryptopp cross-compilation fix by a more
autoconf-style solution, which has been submitted upstream.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Julian Scheel [Thu, 17 Mar 2016 15:03:55 +0000 (16:03 +0100)]
cryptopp: new package
Signed-off-by: Julian Scheel <julian@jusst.de>
[Thomas:
- put HOST_CRYPTOPP_EXTRACT_CMDS earlier in the file, since it's what
gets executed first.
- fix typo in the name of HOST_CRYPTOPP_MAKE_OPTS
- pass -fPIC in CXXFLAGS, since we're building a shared library
- just call "make shared" for the build and "make install" for the
installation.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commands like 'nvme list' require libudev but support for libudev is
decided at compile time, and in buildroot this is hard disabled.
Add a check for udev and if it is available build nvme with udev
support.
Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
[Thomas:
- add comment to explain the LIBUDEV variable value
- use += instead of = to assign <pkg>_MAKE_OPTS.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As stated by Samuel the opencv2 package lacks inter-module dependencies:
http://lists.busybox.net/pipermail/buildroot/2016-April/158902.html
This patch adds the necessary code for freeswitch's mod_cv to compile.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de> Reviewed-by: Samuel Martin <s.martin49@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sun, 17 Apr 2016 21:31:34 +0000 (23:31 +0200)]
arch/x86: remove support for i386
The Linux kernel doesn't even support i386 anymore, there is no NPTL
support for i386 and uClibc-ng only supports NPTL on x86, so there is
essentially no usable thread implementation. Most likely glibc and
musl also don't support i386 either. So it's time to remove the
support for this architecture variant.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Peter Korsgaard [Mon, 18 Apr 2016 14:43:10 +0000 (16:43 +0200)]
netsnmp: ensure lm-sensors is available if enabled
The ucd-snmp/lmsensorsMib module uses lm-sensors, so ensure netsnmp is built
after lm-sensors if enabled.
As the list of mib modules to built is configured using a string option in
Kconfig, we cannot easily select lm-sensors from the netsnmp package - But
we can at least ensure it gets built before hand if enabled.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Ezequiel García [Sat, 16 Apr 2016 15:23:22 +0000 (12:23 -0300)]
board/minnowboard-max: Add more peripherals and features to the kernel
This commit enables support for:
* HDMI audio
* Support for user-provided EDID firmware
(useful to workaround broken monitors)
* Evdev interface
* System V IPC (required by ALSA)
The options make the system more useful.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Ezequiel García [Fri, 15 Apr 2016 15:56:05 +0000 (12:56 -0300)]
board/minnowboard: Unify Minnowboard and Minnowboard MAX boards
Given Minnowboard and Minnowboard MAX boards are very similar,
it's desirable to unify the support for them.
This commit does the following:
1) Remove Minnowboard MAX's genimage.cfg, post-build.sh
and post-image.sh. These are identical to Minnowboard's.
2) Move Minnowboard MAX's linux config, and rename it.
It would be lovely to have a single kernel config file.
The kernel size penalty involved in adding support for
all the peripherals on both boards is small enough to
justify this.
However, the original Minnowboard has some GPIO buttons
that need to be registered by the kernel. This is not
upstreamed, and hence we need to use the yocto v3.8 kernel
to have this support.
3) Rename each grub config to grub-{board}.cfg.
4) Modify (the now unique) post-build script to use
a different grub config, according to the board.
5) Update both defconfigs, as per the above changes.
6) Finally, update the readme.txt.
[Peter: mention MAX in readme title] Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gcc: fix ccache hash of patches in BR2_GLOBAL_PATCH_DIR
In commit f4682cf933, a hash of the patches applied to gcc was created
to make sure that ccache can properly detect when the toolchain has
changed. The patches applied to gcc consist of the buildroot patches in
package/gcc, but also potentially patches in BR2_GLOBAL_PATCH_DIR.
However, the path to the patches in BR2_GLOBAL_PATCH_DIR was corrected
incorrectly, because it misses a /. So instead of:
$(BR2_GLOBAL_PATCH_DIR)/gcc-initial/*.patch
it would look for
$(BR2_GLOBAL_PATCH_DIR)gcc-initial/*.patch
In other words, if BR2_GLOBAL_PATCH_DIR doesn't end with /, the patches
in BR2_GLOBAL_PATCH_DIR are not taken into account in the ccache hash.
To fix, add the missing /
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Cc: He Chunhui <hchunhui@mail.ustc.edu.cn> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gary Bisson [Wed, 13 Apr 2016 13:40:35 +0000 (15:40 +0200)]
qt5webkit: restore package
Although this package has been removed from the official release
packages since Qt5.6.0, it is still available for users to build
it from source. This is useful for platforms without GPU since its
successor (QtWebEngine) requires OpenGL support.
The package now matches the community-based meta-qt5 Yocto layer,
using the exact same revision of the qtwebkit source from github:
https://github.com/meta-qt5/meta-qt5/commit/e434995a
Here is the project source tree:
https://github.com/qtproject/qtwebkit
All the patches have been pulled from Yocto as well.
Since we are now using the source from the git repository, we need
to create an empty .git/ folder to force the headers re-generation.
https://github.com/meta-qt5/meta-qt5/blob/jethro/recipes-qt/qt5/qt5.inc#L33
Note that GPLv3 license option has been added with this release.
Reviewed-by: Julien Corjon <corjon.j@ecagroup.com> Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
[Thomas: fix license to be LGPLv2.1+, not LGPLv2+.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Max Filippov [Fri, 1 Apr 2016 09:22:03 +0000 (12:22 +0300)]
configs/qemu_xtensa_lx60_defconfig: switch to dc233c
dc232b is MMUv2 core, dc233c is very similar MMUv3 core. MMUv3 is the
latest full MMU for xtensa, which allows running both MMU and noMMU
linux variants.
Update configuration overlay and linux config file.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Tested-by: Waldemar Brodkorb <wbx@openadk.org> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The current Buildroot defconfigs for Raspberry Pi and Raspberry Pi 2
instantiate a console on tty1, which appears on HDMI. Add a console on
the serial port (ttyAMA0) to be more consistent with other defconfigs
and provide a better out-of-the-box experience to users used to have a
serial console from Buildroot defconfigs.
This requires three changes:
1. have two 'console=' entries in the kernel command line: tty1,
then ttyAMA0;
2. change BR2_TARGET_GENERIC_GETTY_PORT to "console", so it starts
a getty on the last console= passed to the kernel, ttyAMA0;
3. add a new getty on tty1 to the generated inittab.
Step 2 is actually obtained by removing BR2_TARGET_GENERIC_GETTY_PORT
entirely from the defconfigs, since "console" is the default value.
Step 3 requires a post-build script since the Buildroot makefiles can
configure only one console.
Note: instead of simply adding a new getty on ttyAMA0 (which would
work) this patch actually changes BR2_TARGET_GENERIC_GETTY_PORT to
instantiate a console on UART, then adds back tty1 via
post-build.sh. This is done only to avoid the "GENERIC_SERIAL" comment
where we instantiate an HDMI console, then instantiate a really-serial
console on another line.
Signed-off-by: Samuel Martin <s.martin49@gmail.com> Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
projects / coffee / buildroot.git / log