Joshua Henderson [Thu, 29 Mar 2018 18:15:06 +0000 (11:15 -0700)]
configs/atmel: bump to linux4sam_5.8
Bump at91sam9x5ek, atmel_sama5d27_som1_ek, atmel_sama5d2_xplained,
atmel_sama5d3_xplained, and atmel_sama5d4_xplained all variants to
linux4sam_5.8. The 3 foundation components have their tags changed
(AT91Bootstrap, U-Boot, Linux kernel).
at91bootstrap 3.8.10 is required to support gcc7.
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Thu, 29 Mar 2018 14:52:09 +0000 (16:52 +0200)]
libopenssl: security bump to version 1.0.2o
Fixes the following security issues:
Constructed ASN.1 types with a recursive definition could exceed the stack
(CVE-2018-0739)
Constructed ASN.1 types with a recursive definition (such as can be found in
PKCS7) could eventually exceed the stack given malicious input with
excessive recursion. This could result in a Denial Of Service attack.
There are no such structures used within SSL/TLS that come from untrusted
sources so this is considered safe.
Incorrect CRYPTO_memcmp on HP-UX PA-RISC (CVE-2018-0733)
Because of an implementation bug the PA-RISC CRYPTO_memcmp function is
effectively reduced to only comparing the least significant bit of each
byte. This allows an attacker to forge messages that would be considered as
authenticated in an amount of tries lower than that guaranteed by the
security claims of the scheme. The module can only be compiled by the HP-UX
assembler, so that only HP-UX PA-RISC targets are affected.
rsaz_1024_mul_avx2 overflow bug on x86_64 (CVE-2017-3738)
This issue has been reported in a previous OpenSSL security advisory and a
fix was provided for OpenSSL 1.0.2. Due to the low severity no fix was
released at that time for OpenSSL 1.1.0. The fix is now available in
OpenSSL 1.1.0h.
There is an overflow bug in the AVX2 Montgomery multiplication procedure
used in exponentiation with 1024-bit moduli. No EC algorithms are affected.
Analysis suggests that attacks against RSA and DSA as a result of this
defect would be very difficult to perform and are not believed likely.
Attacks against DH1024 are considered just feasible, because most of the
work necessary to deduce information about a private key may be performed
offline. The amount of resources required for such an attack would be
significant. However, for an attack on TLS to be meaningful, the server
would have to share the DH1024 private key among multiple clients, which is
no longer an option since CVE-2016-0701.
This only affects processors that support the AVX2 but not ADX extensions
like Intel Haswell (4th generation).
For more details, see https://www.openssl.org/news/secadv/20180327.txt
The copyright year changed in LICENSE, so adjust the hash to match.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Thu, 29 Mar 2018 14:15:15 +0000 (16:15 +0200)]
e2fsprogs: bump to version 1.44.1
From the release notes (https://lwn.net/Articles/750103/):
E2fsprogs 1.44.0 introduced a regression introduced which caused e2fsck
to fail to support HTree directories on big-endian systems. Fix how we
read block numbers for internal htree nodes.
Removed a potential memory leak from fsck.
E2image now correctly creates e2image files for bigalloc file systems.
Dumpe2fs and debugfs now correctly support e2image files for file
systems that have the meta_bg option enabled.
E2fsck and debugfs now correctly handle delete inodes (including
processing the orphaned inode list in the case of e2fsck) for bigalloc
file systems. (Addresses Google Bug: #73795618)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 6205b75873c (sngrep: gnutls support also needs libgcrypt) ensured
that --with-gnutls is only used when both gnutls and libgcrypt are enabled,
but it didn't ensure libgcrypt gets built before sngrep or told the
configure script where to find libgcrypt-config, breaking the build.
Fix both issues.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Baruch Siach [Mon, 26 Mar 2018 20:23:02 +0000 (23:23 +0300)]
xerces: add upstream security fix
CVE-2017-12627: dereference of a NULL pointer while processing the path
to the DTD.
xerces 3.2.1 includes this patch. But this version also added
AC_RUN_IFELSE to its configure script, making cross compilation harder.
Switching to cmake is also problematic since the minimum required cmake
version is 3.2.0. The host dependencies check currently allows minimum
cmake version 3.1.
Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Carlos Santos [Sun, 28 Jan 2018 04:43:58 +0000 (02:43 -0200)]
lshw: use data files provided by hwdata
lshw is seldomly released, so its data files become easily
outdated. Instead, this commit makes use of the data files provided by
hwdata. This is easily possible because lshw looks for the files in
several directories, including /usr/share/hwdata, where the hwdata
collection is installed.
We remove the entire /usr/share/lshw directory, where the not very
up-to-date data files where installed. Four files were installed
there: pci.ids, usb.ids (which are now provided by hwdata), manuf.txt
and oui.txt (which are not used at run time).
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
[Thomas:
- rework commit log
- replace patch by a simple removal of the /usr/share/lshw directory
- add "runtime" comment in Config.in for the BR2_PACKAGE_LSHW
dependency] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Chris Lesiak [Tue, 23 Jan 2018 23:20:05 +0000 (17:20 -0600)]
package/avahi: Add sysusers.d snippet
Signed-off-by: Chris Lesiak <chris.lesiak@licor.com> Reviewed-by: Samuel Martin <s.martin49@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Chris Lesiak [Tue, 23 Jan 2018 23:17:23 +0000 (17:17 -0600)]
package/avahi: Set the path to D-Bus system.d directory
Since D-Bus 1.9.18, the recommended location for the system and
session busses configuration files is /usr/share instead of /etc. From
the D-Bus NEWS file:
D-Bus 1.9.18 (2015-07-21)
==
The “Pirate Elite” release.
Configuration changes:
• The basic setup for the well-known system and session buses is now done
in read-only files in ${datadir}, moving a step closer to systems
that can operate with an empty /etc directory. In increasing order
of precedence:
· ${datadir}/dbus-1/s*.conf now perform the basic setup such as setting
the default message policies.
· ${sysconfdir}/dbus-1/s*.conf are now optional. By default
dbus still installs a trivial version of each, for documentation
purposes; putting configuration directives in these files is
deprecated.
· ${datadir}/dbus-1/s*.d/ are now available for third-party software
to install "drop-in" configuration snippets (any packages
using those directories should explicitly depend on at least this
version of dbus).
· ${sysconfdir}/dbus-1/s*.d/ are also still available for sysadmins
or third-party software to install "drop-in" configuration snippets
· ${sysconfdir}/dbus-1/s*-local.conf are still available for sysadmins'
overrides
${datadir} is normally /usr/share, ${sysconfdir} is normally /etc,
and "s*" refers to either system or session as appropriate.
Therefore, this commit adjusts the Avahi package to install the D-Bus
related files to /usr/share/dbus-1/system.d.
Signed-off-by: Chris Lesiak <chris.lesiak@licor.com> Reviewed-by: Samuel Martin <s.martin49@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Oleksandr Zhadan [Thu, 15 Mar 2018 21:07:49 +0000 (17:07 -0400)]
configs/arcturus_ucls1012a: new defconfig
The uCLS1012A-SOM product family (ucls1012a) is an Arcturus Networks Inc.
64bit ARM Cortex-A53 class System on Module powered by a NXP QorIQ LS1012A
Low Power Communication Processor. This 314 pin MXM3.0/SMARC module card
contains DDR3, QSPI NOR Flash, eMMC NAND Flash, optional Audio CODEC and is
available with 1 or 2 Gig-Ethernet PHYs.
Signed-off-by: Oleksandr Zhadan <oleks@arcturusnetworks.com> Signed-off-by: Michael Durrant <mdurrant@arcturusnetworks.com>
Changes v1 -> v2:
- updated kernel and u-boot source repositories to github
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Trent Piepho [Thu, 15 Mar 2018 21:47:33 +0000 (14:47 -0700)]
Config.in: Document BR2_CCACHE_DIR override
This variable, like BR2_DL_DIR, is designed to be overridable from the
environment. Unlike BR2_DL_DIR, it is not documented as such in the
Config.in help text. Do so now.
Signed-off-by: Trent Piepho <tpiepho@impinj.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Joshua Henderson [Mon, 26 Mar 2018 19:34:05 +0000 (12:34 -0700)]
Config.in: add -Ofast option
-Ofast (introduced in GCC 4.6) It combines the existing optimization level -O3
with options that can affect standards compliance but result in better optimized
code. For example, -Ofast enables -ffast-math.
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Stefan Becker <chemobejk@gmail.com> Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Adam Duskett [Sun, 18 Mar 2018 19:01:27 +0000 (15:01 -0400)]
qemu: remove support for some PowerPC processors in host qemu
The 620, 630, and 970 are not supported at this time by qemu.
Signed-off-by: Adam Duskett <aduskett@gmail.com> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
That commit added a script to "toolchain" post install staging hooks.
This will only be executed if TOOLCHAIN_INSTALL_STAGING is set to YES.
Signed-off-by: Stefan Becker <chemobejk@gmail.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
busybox: disable PAM in the config if linux-pam is not selected
Currently there is only logic to enable PAM when linux-pam is selected.
However, busybox will fail to build with PAM enabled if the linux-pam
package has not been built before. So we should forcibly disable PAM in
busybox in that case.
Normally this is not an issue since our default busybox config doesn't
have PAM enabled. However, if you enable linux-pam, then save the
busybox config to a custom configuration file, then disable linux-pam
again, and then do a "make clean; make", the build will fail. A more
practical situation where this can occur is when the same custom
busybox config is used in a Buildroot config with and without
linux-pam.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Yann E. MORIN [Sun, 25 Mar 2018 19:48:05 +0000 (21:48 +0200)]
package/eudev: don't forcibly link with -lrt
This was carried over from udev back when it were an separate package,
but was not even needed by eudev 1.3 when we introduced it back in 2014
(937a95449ec: eudev: new package).
Drop it now.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Bernd Kuhls <bernd.kuhls@t-online.de> Cc: Eric Le Bihan <eric.le.bihan.dev@free.fr> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Carlos Santos [Sun, 25 Mar 2018 03:59:52 +0000 (00:59 -0300)]
toolchain: fix detection of SSP support
GCC issues a warning message if -fstack-protector is passed but SSP is
not available, so in order to force the compilation to fail we must also
pass -Werror.
All external toolchains were verified. The only one whose configuration
incorrectly selected BR2_TOOLCHAIN_HAS_SSP was CodeSourcery NIOSII.
Jared Bents [Tue, 20 Mar 2018 20:39:42 +0000 (15:39 -0500)]
python-networkx: new package
Update to add python-networkx package to buildroot. While 2.1
is the latest version, the current version of setools does not
work with versions past 1.11.
Signed-off-by: Jared Bents <jared.bents@rockwellcollins.com> Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Thomas Petazzoni [Sat, 24 Mar 2018 14:20:08 +0000 (15:20 +0100)]
core: kill DEPENDENCIES_HOST_PREREQ
Now that DEPENDENCIES_HOST_PREREQ is no longer used anywhere, we can
kill it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Sat, 24 Mar 2018 14:20:07 +0000 (15:20 +0100)]
package/pkg-generic: handle host-fakedate as a regular dependency
This commit moves the host-fakedate dependency handling from
DEPENDENCIES_HOST_PREREQ to a proper regular dependency handled by the
package infrastructure.
host-fakedate is added as dependency to all packages, except
host-skeleton, because we depend on it.
In addition, we make sure that host-fakedate does not grow a
dependency on host-{tar,xz,lzip,ccache} to avoid circular
dependencies. host-fakedate does not need any extraction tool and does
not need to build C/C++ code (the source code is just a shell script
available in Buildroot).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Sat, 24 Mar 2018 14:20:06 +0000 (15:20 +0100)]
package/pkg-generic: handle host-ccache as a regular dependency
This moves the host-ccache dependency handling from
DEPENDENCIES_HOST_PREREQ to a proper package dependency. When
BR2_CCACHE=y, we add host-ccache as a regular dependency of all
packages except:
- The extractor packages host-tar, host-xz and host-lzip
- host-ccache itself
- host-skeleton, because all packages depend on it
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Tested-by: Matt Weber <matthew.weber@rockwellcollins.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Sat, 24 Mar 2018 14:20:05 +0000 (15:20 +0100)]
package/pkg-generic: handle host-lzip as an extract dependency
This moves the host-lzip dependency handling from
DEPENDENCY_HOST_PREREQ to an extract dependency.
To achieve that, check-host-lzip.mk fills in the
BR2_LZIP_HOST_DEPENDENCY with host-lzip if building a host-lzip is
needed. The name BR2_LZIP_HOST_DEPENDENCY has been chosen because it
matches the name BR2_CMAKE_HOST_DEPENDENCY already used in
check-host-cmake.mk.
The BR2_LZIP_HOST_DEPENDENCY is added to all packages, except:
- host-lzip, because we would otherwise depend on ourself.
- host-tar, because lzip itself is delivered as a tarball, so we need
to have host-lzip depend on host-tar, and not host-tar depend on
host-lzip
- host-skeleton, because we need to have host-lzip depend on
host-skeleton, and not the opposite.
We also mutually exclude host-lzip and host-xz from dependending on
each other, to avoid a circular dependency.
In addition, we modify lzip.mk to explicitly build host-lzip without
ccache. We generally took the approach of building host-ccache *after*
all the extractors have been built.
[Peter: fix s/host-tar/host-lzip/ typo, fix s/xz/lzip/ typo] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Sat, 24 Mar 2018 14:20:04 +0000 (15:20 +0100)]
package/pkg-generic: handle host-xz as an extract dependency
This moves the host-xz dependency handling from
DEPENDENCY_HOST_PREREQ to an extract dependency.
To achieve that, check-host-xz.mk fills in the
BR2_XZ_HOST_DEPENDENCY with host-xz if building a host-xz is
needed. The name BR2_XZ_HOST_DEPENDENCY has been chosen because it
matches the name BR2_CMAKE_HOST_DEPENDENCY already used in
check-host-cmake.mk.
The BR2_XZ_HOST_DEPENDENCY is added to all packages, except:
- host-xz, because we would otherwise depend on ourself.
- host-tar, because xz itself is delivered as a tarball, so we need
to have host-xz depend on host-tar, and not host-tar depend on
host-xz
- host-skeleton, because we need to have host-xz depend on
host-skeleton, and not the opposite.
In addition, we modify xz.mk to explicitly build host-xz without
ccache. We generally took the approach of building host-ccache *after*
all the extractors have been built.
[Peter: fix s/host-tar/host-xz/ typo] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Sat, 24 Mar 2018 14:20:03 +0000 (15:20 +0100)]
package/pkg-generic: handle host-tar as an extract dependency
This moves the host-tar dependency handling from
DEPENDENCY_HOST_PREREQ to an extract dependency.
To achieve that, check-host-tar.mk fills in the
BR2_TAR_HOST_DEPENDENCY variable with host-tar if building a host-tar
is needed. The name BR2_TAR_HOST_DEPENDENCY has been chosen because it
matches the name BR2_CMAKE_HOST_DEPENDENCY already used in
check-host-cmake.mk.
The BR2_TAR_HOST_DEPENDENCY is added to all packages, except host-tar
itself (obviously) and host-skeleton, because we depend on
host-skeleton to install host-tar properly in HOST_DIR.
In addition, we modify tar.mk to explicitly build host-tar without
ccache: since ccache source code is available as a tarball, ccache
will obviously depend on host-tar if the system tar is insufficient.
Finally, to make things really clean, we also add
$(BR2_TAR_HOST_DEPENDENCY) to the dependencies of the tar filesystem
format, since it requires tar, so we'd better make sure we have a
suitable tar.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Tested-by: Matt Weber <matthew.weber@rockwellcollins.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Sat, 24 Mar 2018 14:20:02 +0000 (15:20 +0100)]
package/pkg-generic: add the concept of extract dependency
Extract dependencies are dependencies that must be ready before the
extract step of a package, i.e for tools that are needed to extract
packages themselves. Current examples of such tools are host-tar,
host-lzip and host-xz.
They are currently handled through DEPENDENCIES_HOST_PREREQ. However,
this mechanism has a number of drawbacks:
- First and foremost, because host-tar/host-lzip/host-xz are not
listed in the dependencies of packages, the package infrastructure
does not know it should rsync them in the context of per-package
SDK.
- Second, there is no dependency handling *between* them. I.e, we
have no mechanism that says host-tar should be built before
host-lzip, while it is in fact the case: if you need to build
host-lzip, you need to extract a tarball, so you may need host-tar
if your system tarball is not capable enough.
For those reasons, it makes sense to add explicit support for "extract
dependencies" in the package infrastructure, through the
<pkg>_EXTRACT_DEPENDENCIES variable. It is unlikely this variable will
ever be used by a package .mk file, but it will be used internally by
the package infrastructure.
[Peter: fix typo in manual] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Tested-by: Matt Weber <matthew.weber@rockwellcollins.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Sat, 24 Mar 2018 14:20:01 +0000 (15:20 +0100)]
pkg-cmake: install CMake files as part of a package
Currently, the toolchainfile.cmake and Buildroot.cmake files are
installed outside of any package, just triggered by the toolchain
target.
As part of the per-package SDK effort, we are trying to avoid anything
that installs to the global $(HOST_DIR), and this is one of the
remaining files installed in $(HOST_DIR) outside of any package. We
fix this by installing such files as part of the toolchain package
post-install staging hooks.
Yes, a post-install staging hook to install things to $(HOST_DIR) is a
bit weird, but the toolchain infrastructure is made of target packages
only, and they all install a lot of stuff to $(HOST_DIR) already.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Sat, 24 Mar 2018 14:20:00 +0000 (15:20 +0100)]
Makefile, skeleton: move the host skeleton logic to host-skeleton package
As part of the per-package SDK work, we want to avoid having logic
that installs files to the global HOST_DIR, and instead do it inside
packages. One thing that gets installed to the global HOST_DIR is the
minimal "skeleton" that we create in host:
- the "usr" symbolic link for backward compatibility
- the "lib" directory, and its lib64 or lib32 symbolic links
This commit moves this logic to a new host-skeleton package, and makes
all packages (except itself) depend on it.
While at it, use $(Q) instead of @ in the HOST_SKELETON_INSTALL_CMDS.
[Peter: drop host-patchelf reference in commit message] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Baruch Siach [Sat, 24 Mar 2018 21:43:23 +0000 (00:43 +0300)]
xfsprogs: fix build with older kernel headers
xfsprogs uses a local definition of struct fsxattr when the kernel
provided one in linux/fs.h is too old. The preprocessor trickery that
allows to include linux/fs.h without colliding with the local
definitions breaks when source files include linux/fs.h on their own.
Add a patch that removes these local includes.
Baruch Siach [Tue, 20 Mar 2018 15:56:57 +0000 (17:56 +0200)]
qemu: fix build with glibc 2.27
glibc version 2.27 added a wrapper for the memfd_create system call. The
wrapper prototype collides with a static declaration of memfd_create.
Add upstream patch to correctly detect the glibc provided memfd_create
definition.
Fabio Estevam [Sat, 10 Mar 2018 22:45:37 +0000 (19:45 -0300)]
configs/imxsabre: Fix U-Boot parallel build issue
Sometimes imximage throws the following error:
MKIMAGE u-boot-dtb.imx
Error: No BOOT_FROM tag in board/freescale/mx6sxsabresd/imximage.cfg.cfgtmp
arch/arm/imx-common/Makefile:91: recipe for target 'u-boot-dtb.imx' failed
Later on, when running mkimage for the u-boot.imx it will succeed in
finding the IVT offset.
Looks like some race condition happening during parallel build when
processing mkimage for u-boot-dtb.imx and u-boot.imx.
A proper fix still needs to be implemented, but as a workaround let's
remove the error when the IVT offset is not found.
It is useful to have such message, especially during bring-up phase,
but the build error that it causes is severe, so better avoid the
build error for now.
The error checking can be re-implemented later when we have a proper
fix.
Add the woff2 package to Builroot. This is needed by webkitgtk from
version 2.20.0 onwards. WebKitGTK+ used to bundle a copy of the library,
but it stopped doing so now that the upstream is has been making
releases.
[Peter: fix license hash] Signed-off-by: Adrian Perez de Castro <aperez@igalia.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add the brotli package to Buildroot. This is needed by woff2, which in
turn is needed by webkitgtk from version 2.20.0 onwards. WebKitGTK+ used
to bundle a copy of the library, but it stopped doing so now that the
upstream has started making releases.
[Peter: fix license hash] Signed-off-by: Adrian Perez de Castro <aperez@igalia.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Carlos Santos [Fri, 23 Mar 2018 17:00:30 +0000 (14:00 -0300)]
tpm2-tss: fix build with musl
Add a missing <sys/select.h> inclusion, needed for the definition of the
fd_set type. This patch can't be sent upstream because the changed file
does not exist anymore on the master branch.
Baruch Siach [Tue, 20 Mar 2018 12:34:57 +0000 (14:34 +0200)]
xfsprogs: fix build with libunistring
The latest xfsprogs bump to version 4.15.1 added an optional dependency
on libunistring. Make sure we build libunistring before xfsprogs.
xfsprogs also added -lunistring to its make dependency. This does not
work very well with cross compilation because make does not know about
sysroot. Add a patch to remove this dependency.
To make shared only link with libunistring work, we also need to extend
the -static-libtool-libs patch to cover xfs_scrub as well.
Peter Korsgaard [Fri, 23 Mar 2018 09:57:41 +0000 (10:57 +0100)]
efivar: bump version
Drop 0001-Use-z-muldefs-to-avoid-the-multiple-definitions-bug-.patch and
0003-Remove-some-extra-const-that-gcc-complains-about.patch as they are now
upstream.
The upstream repo moved to the 'rhboot' github project, so adjust upstream
URL in .mk and help text to match.
Drop dependency on !musl as it is now support since e04281e60cf0d
(makeguids: Ensure compatibility with other libcs).
Drop BINTARGETS workaround as this is fixed since 6c674283697 (Don't build
static by default).
Drop popt dependency as it is no longer needed since 1aec5e7891 (Replace
popt usage with getopt_long in efivar.c).
While we are at it, also add a hash for the license file.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
projects / coffee / buildroot.git / log