Peter Seiderer [Mon, 16 Apr 2018 19:39:53 +0000 (21:39 +0200)]
squashfs: add zstd support
Signed-off-by: Peter Seiderer <ps.report@gmx.net> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Peter Seiderer [Mon, 16 Apr 2018 19:39:52 +0000 (21:39 +0200)]
zstd: add libzstd support
Add patch to split libzstd install target into pc, static, shared and
includes target. Call only the needed ones for the buildroot
staging/target install steps (respect the static/shared
configuration).
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[Thomas: as suggested by Yann E. Morin, refactor the build/install
commands to use only one invocation, with intermediate ZSTD_BUILD_LIBS
and ZSTD_INSTALL_LIBS variables, defined depending on whether
static/shared/static+shared is selected.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Peter Seiderer [Mon, 16 Apr 2018 19:39:51 +0000 (21:39 +0200)]
fs/squashfs: add zstd support
Signed-off-by: Peter Seiderer <ps.report@gmx.net> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Peter Seiderer [Mon, 16 Apr 2018 19:39:50 +0000 (21:39 +0200)]
squashfs: add host zstd support
Signed-off-by: Peter Seiderer <ps.report@gmx.net> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Peter Seiderer [Mon, 16 Apr 2018 19:39:49 +0000 (21:39 +0200)]
zstd: add host libzstd support
For the host only the libzstd library is built (no need for host-lz4
host-xz host-zlib dependencies because they affect only the cmdline
tool).
Signed-off-by: Peter Seiderer <ps.report@gmx.net> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: use '-C $(@D)/lib' instead of '-C $(@D) lib' at build time,
to be consistent with what is done at install time, as suggested by
Yann E. Morin.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When libpcap itself is linked against other libraries, reaver fails to
build as it doesn't link with libpcap dependencies. This patch fixes
that by using the pcap-config program.
boot/uboot: default to kconfig buildsystem for latest version
By default, the builsystem for uboot defaults to 'legacy', while the
default version is very well capable of using the 'kconfig' buildsystem
instead.
Having the 'legacy' buildsystem be the default in that case makes it
quite inconvenient for users: they would expect to be able to use e.g.
uboot-menuconfig et al. with the default uboot version.
Switch to using 'kconfig' when we use the latest version. Keep the
'legacy' as default for everything else.
Also, invert the 'legacy' and 'kconfig' entries in the choice: it is
nicer to have the recent and future-proof entry first.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Tested-by: Petr Vorel <petr.vorel@gmail.com> Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Thomas Petazzoni [Mon, 23 Apr 2018 19:59:54 +0000 (21:59 +0200)]
support/testing: fix Marvell ATF source code
The version of the ARM Trusted Firmware from Marvell was a Git branch,
not a Git commit, leading to unreproducible results. So let's use a
Git commit instead, which is the latest available from the branch that
was previously used.
More specifically, this branch has recently seen a fix that is needed
for ATF to build properly with recent gcc versions:
Thomas Petazzoni [Mon, 23 Apr 2018 19:59:53 +0000 (21:59 +0200)]
configs/solidrun_macchiatobin_*: use a Git commit for ATF
The version of the ARM Trusted Firmware from Marvell was a Git branch,
not a Git commit, leading to unreproducible results. So let's use a
Git commit instead, which is the latest available from the branch that
was previously used.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Tested-by: Sergey Matyukevich <geomatsi@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Thomas Petazzoni [Mon, 23 Apr 2018 20:14:56 +0000 (22:14 +0200)]
support/testing: fix ATF Vexpress test case
This test case currently fails to build with:
./build/juno/release/bl1/context_mgmt.o: In function `cm_prepare_el3_exit':
context_mgmt.c:(.text.cm_prepare_el3_exit+0x54): undefined reference to `cm_set_next_context'
context_mgmt.c:(.text.cm_prepare_el3_exit+0x54): relocation truncated to fit: R_AARCH64_JUMP26 against undefined symbol `cm_set_next_context'
This issue has been fixed upstream in commit 10c252c14b7f446c0b49ef1aafbd5d37804577dd, available since v1.3. So
while we bump, let's bump to the latest version of ATF, v1.5.
Since commit 5563a1c6a48716debe2983869ddb757318094dce
("support/check-uniq-files: support weird locales and filenames"), the
'csv' Python module is no longer used by the check-uniq-files.
Due to this, flake8 complains with:
support/scripts/check-uniq-files:4:1: F401 'csv' imported but unused
Fix this by dropping the useless csv import.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The release announcement mentions these security fixes:
Defend against Bellcore glitch attacks by verifying the results of RSA
private key operations.
Fix implementation of the truncated HMAC extension. The previous
implementation allowed an offline 2^80 brute force attack on the HMAC
key of a single, uninterrupted connection (with no resumption of the
session).
Carlos Santos [Sat, 21 Apr 2018 13:00:10 +0000 (10:00 -0300)]
modem-manager: support a defaults file in the init script
Sometimes it is useful to pass some parameters to ModemManager when it
starts (e.g. --log-level). Allow the user add a file with such flags in
a MODEMMANAGER_ARGS variable. This is simpler than overriding the whole
startup script (e.g. by means of a rootfs overlay).
Signed-off-by: Carlos Santos <casantos@datacom.ind.br> Acked-by: Petr Vorel <petr.vorel@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since commit e93fec6673e (lz4: bump to version 1.8.1.2) we use two make
targets, 'lib' and 'lz4'. Both targets depend on the static library.
When these targets run in parallel the two make instances that build the
static library race against each other. Split these targets to ensure
build order.
Thomas Petazzoni [Fri, 20 Apr 2018 14:07:13 +0000 (16:07 +0200)]
bluez5_utils: add patch to fix readline issue
Since bluez5_utils 5.49, some code using readline was compiled even if
readline was not available. After this issue was reported upstream, a
patch was proposed by an upstream developer to address the issue. This
commit integrates this patch (under review upstream), which fixes the
problem.
Thomas Petazzoni [Fri, 20 Apr 2018 09:55:22 +0000 (11:55 +0200)]
uclibc: backport upstream patch adding fcntl definitions on OpenRISC
A number of fcntl.h definitions were missing on OpenRISC in uClibc-ng,
causing build failures such as:
gfile.c: In function 'splice_stream_with_progress':
gfile.c:3017:35: error: 'F_SETPIPE_SZ' undeclared (first use in this function)
buffer_size = fcntl (buffer[1], F_SETPIPE_SZ, 1024 * 1024);
This comit backports a patch that was merged in upstream uClibc-ng,
which addresses this problem.
Thomas Petazzoni [Thu, 19 Apr 2018 20:26:54 +0000 (22:26 +0200)]
support/config-fragments/autobuild: update all Buildroot pre-built toolchains
This commit updates all the pre-built Buildroot toolchains, which have
all been rebuilt with Buildroot as of commit 046c5e2. The initial
motivation for this update is that an upcoming bump of procps-ng uses
fopencookie(), which has only been introduced in musl 1.1.19, which
itself started being used in Buildroot after the 2018.02 release.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested using test-pkg (removed skipped toolchains from log):
armv5-ctng-linux-gnueabi [ 1/46]: OK
armv7-ctng-linux-gnueabihf [ 2/46]: OK
br-aarch64-glibc [ 3/46]: OK
br-arcle-hs38 [ 4/46]: OK
br-arm-cortex-a9-glibc [ 6/46]: OK
br-arm-cortex-a9-musl [ 7/46]: OK
br-arm-full [ 9/46]: OK
br-i386-pentium4-full [12/46]: OK
br-i386-pentium-mmx-musl [13/46]: OK
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The current method of supporting static only build, removal of all lines
that match the SHARED regex from lib/Makefile, is crude and fragile.
Instead, patch lib/Makefile to allow disable of shared libraries.
Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
glibc before 2.17 require the -lrt linker option for clock_gettime(). We
do not support pre 2.17 glibc for the target anymore, but there are
still host platforms with these versions. Add upstream patch to skip use
of clock_gettime() with older glibc versions.
The recent zeromq version bump to 4.2.5 added a call to
pthread_condattr_setclock() which is only provided by the NPTL
implementation of pthreads. Add this dependency to zeromq and all
reverse dependencies recursively.
In commit 2a27294e9ade6130a12ced9a1f152c51431a870e ("grub2: force
-fno-stack-protector in CFLAGS"), a fix was made to the grub2 package
to make it build properly even when SSP support is enabled.
Check:
- the daemon is started;
- a message is collected;
- the daemon does not issue a warning message on startup.
When the .conf file version does not match the package version a warning
message shows up on serial on every boot. This message is generated by
syslog-ng before it is running, so it is not logged to
/var/log/messages. So in order to test the message is generated, restart
the server. It makes the message appears on /var/log/messages (since the
server is already running) where its existence can be easily tested
using grep.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@datacom.ind.br> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
syslog-ng: bump version header in conf file to 3.10
Remove a runtime warning message about configuration file being too old.
Do the same as commit 3dad25466d "syslog-ng: Bump version header in conf
file to 3.9". Package version of syslog-ng is 3.10.1, so bump version
number in syslog-ng.conf to 3.10.
Also add a comment to avoid the same warning message reappears when the
package is bumped.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@datacom.ind.br> Cc: Chris Packham <judge.packham@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The different versions of git will behave in different ways when
fetching remote references, as summarised by the table below:
| ancient git | new git
--------------------------------------------------------------------
git fetch | fetch all refs but tags | fetches all refs but tags
git fetch -t | fetches only tags | fetch all refs and tags
(git-fetch may still fetch tags, but only if reachable from a branch)
So, to cover all the bases, we do a simple fetch, to be sure we have
branches, followed by the existing fetch -t, to get extra tags.
Calin Crisan [Sun, 25 Mar 2018 10:18:55 +0000 (13:18 +0300)]
toolchain-external-custom: allow specifying relative path to binaries
There are cases where a downloaded toolchain doesn't have its binaries
placed directly in a "bin" subfolder (where BuildRoot currently looks
for them).
A common example is the official Raspberry Pi Toolchain
(https://github.com/raspberrypi/tools), which has its binaries in
"arm-bcm2708/arm-linux-gnueabihf/bin".
This commit introduces BR2_TOOLCHAIN_EXTERNAL_REL_BIN_PATH that defaults
to "bin" and can be changed as needed.
Signed-off-by: Calin Crisan <ccrisan@gmail.com> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: rework a bit how TOOLCHAIN_EXTERNAL_REL_BIN_PATH is defined.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Set LDLIBS to TARGET_LDFLAGS for TARGET_LDFLAGS to be added to the link
commands. Makefile does not use the LDFLAGS environment variable. This
fixes static linking.
Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
There are cases where a repository might be broken, e.g. when a previous
operation was killed or otherwise failed unexpectedly.
We fix that by always initialising the repository, as suggested by
Ricardo. git-init is safe on an otherwise-healthy repository:
Running git init in an existing repository is safe. It will not
overwrite things that are already there. [...]
Using git-init will just ensure that we have the strictly required files
to form a sane tree. Any blob that is still missing would get fetched
later on.
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Reported-by: Ricardo Martincoski <ricardo.martincoski@gmail.com> Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com> Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com> Cc: Arnout Vandecappelle <arnout@mind.be> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Acked-by: Ricardo Martincoski <ricardo.martincoski@gmail.com> Tested-by: Ricardo Martincoski <ricardo.martincoski@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
download/git: ensure we always work in the expected repository
git always look directories up until it finds a repository. In case
the git cache is broken, it may no longer be identified as a repository,
and git will look higher in the directories until it finds one.
In the default conditions, this would be Buildroot's own git tree
(because DL_DIR is a subdir of Buildroot), but in some situations may
very well be any repository the user has Buildroot in, like a
br2-external tree...
So, we force git to use our git cache and never look elsewhere, as
Suggested by Ricardo.
Use GIT_DIR, as it has been there for ages now, while --git-dir was
only introduced later (even if most distros ship an later version),
as suggested by Arnout.
Also fix the one call to git that was not using the wrapper.
Reported-by: Ricardo Martincoski <ricardo.martincoski@gmail.com> Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com> Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com> Cc: Arnout Vandecappelle <arnout@mind.be> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Acked-by: Ricardo Martincoski <ricardo.martincoski@gmail.com> Tested-by: Ricardo Martincoski <ricardo.martincoski@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
package/wmctrl: x-includes and x-libraries must be set for cross-compiling
set x-includes and x-libraries configure option for cross-compiling.
wmctrl can use poisoned paths if these options are not passed to
configure script.
usb_modeswitch: set CXX to false when C++ is missing
Similar to the openocd fix in commit 5966e2dc54 (package/openocd: fix
fallout after no-C++ fixups) the jimctl that is bundled with
usb_modeswitch also wants to find a binary. This broke with commit 4cd1ab158 (core: alternate solution to disable C++). Revert to 'false'
instead of 'no' here as well.
qt53d: install missing QML modules, plugins and examples
Some files were missing on the first build of qt53d but added later:
- by qt5base for the plugins because it copies the whole /usr/lib/qt/plugins
directory
- by qt5declarative for the QML modules because it copies the whole
/usr/qml directory
Also, the qt53d examples were not installed if
BR2_PACKAGE_QT5BASE_EXAMPLES was set.
Signed-off-by: Romain Reignier <rom.reignier@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Thomas Petazzoni [Sun, 15 Apr 2018 20:22:45 +0000 (22:22 +0200)]
linux-firmware: support paths with subdirs in LINUX_FIRMWARE_DIRS
Following commit cdb7876f63a253254b86637aaac8b255a426b60a
("linux-firmware: add Qualcomm video accelerator and GPU firmware
options"), LINUX_FIRMWARE_DIRS can now contain entries with subdirs,
such as "qcom/venus-1.8". Such entries are currently not supported by
the logic in LINUX_FIRMWARE_INSTALL_DIRS.
Indeed the current logic consists in:
- Removing the destination directory
- Copying to the destination directory
Unfortunately, the last step fails if a component of the path leading
to the destination directory does not exist. To overcome this, we
simply add the appropriate mkdir before the copy.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Carlos Santos [Mon, 16 Apr 2018 02:29:40 +0000 (23:29 -0300)]
tpm2-abrmd: don't test if the binary exists in the init script
The test doesn't make sense. Buildroot installs both abrmd and its init
script as part of the same package. But if it ever happens for some
reason, the error message from start-stop-daemon should be pretty clear.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
projects / coffee / buildroot.git / log