Francois Perrad [Wed, 18 Oct 2017 16:46:48 +0000 (18:46 +0200)]
prosody: refactor with PROSODY_CONF_OPTS variable
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[Thomas: keep TARGET_CONFIGURE_OPTS in the environment.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cam Hutchison [Thu, 19 Oct 2017 11:04:46 +0000 (22:04 +1100)]
DEVELOPERS: remove package/sepolgen/
The directory package/sepolgen/ was removed in commit 9d6da7a26
(policycoreutils: split packages and bump to 2.7), but two
entries were left in the DEVELOPERS file.
This causes the following warnings when running util/get-developers:
WARNING: 'package/sepolgen/' doesn't match any file
WARNING: 'package/sepolgen/' doesn't match any file
Remove the erroneous entries.
Signed-off-by: Cam Hutchison <camh@xdna.net> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Olivier Schonken [Thu, 19 Oct 2017 08:56:35 +0000 (10:56 +0200)]
qpdf: add missing dependency on jpeg
Fixes:
configure: WARNING: unable to find required header jpeglib.h
configure: WARNING: unable to find required library jpeg
configure: error: some required prerequisites were not found
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Lothar Felten [Fri, 20 Oct 2017 11:19:17 +0000 (13:19 +0200)]
Config.in: fix help comment for gcc optimization
The default for is set to BR2_OPTIMIZE_S, the help comment designated
BR2_OPTIMIZE_0 as default.
Changed the help comment to show that BR2_OPTIMIZE_S is the default.
Signed-off-by: Lothar Felten <lothar.felten@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Adam Duskett [Thu, 19 Oct 2017 21:46:03 +0000 (17:46 -0400)]
setools: change sepol library directory
setools currently points the libsepol library directory to
$(STAGING_DIR)/lib/ when it should be $(STAGING_DIR)/usr/lib
Signed-off-by: Adam Duskett <Adamduskett@outlook.com> Tested-by: Matt Weber <matthew.weber@rockwellcollins.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Adam Duskett [Tue, 17 Oct 2017 22:32:18 +0000 (18:32 -0400)]
policycoreutils: split packages and bump to 2.7
Policycoreutils was broken up into several packages, as such several
changes needed to happen for this patch to work:
- Remove patches 3, 4, and 5 as they no longer apply.
- Refresh patches 1 and 2 to work with version 2.7
- Remove semodule_${deps,expand,link,package} and sestatus from the makedirs
in the mk file.
- Remove restorecond from the make and config file. (Seperate package)
- Remove Audit2allow from the make and config file. (In a different package)
- Remove the package sepolgen
- Add the package selinux-python
- Add the package restorecond
- Add the package semodule-utils
- Add the relevant Config.in.legacy options into the menu.
Because these are utilities that work on top of python, the older versions of
these utilites still work, and as such this should be a single patch.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Adam Duskett [Tue, 17 Oct 2017 22:32:16 +0000 (18:32 -0400)]
libsepol: bump to 2.7, setools: bump to 4.1.1
The reason for combining these patches is because the
old version of setools is not compatible iwth libsepol 2.7. If a user where
to do a git pull on a patch that only updates libsepol or setools, the build
would fail to compile.
setools has been completely rewritten in python instead of C.
The current version of setools includes a few programs that require
python-qt5 or python-networkx to run, however the package does not
check to see if these exist when compiling, and will install the scripts
to the target directory even if they don't exist.
In the case of python-networkx, this package is not available on Buildroot.
The scripts that require them are: sedta and seinfoflow.
In the case of python-qt5, qpol is the script that requires it.
Some setools.mk notes to get the package to compile:
- Convert the package .mk to use python-package instead of autotools-package.
- setup.py hard codes base_lib_dirs to point to several host directories.
To fix this, sed is used before compiling to point the base_lib_dirs to
the staging directory.
- setup.py also includes the "Werror" flag, however compilers before gcc6
cause a few autogenerated variables to not be initialized before use,
causing the build to fail.
To fix this, a patch is provided that removes the Werror flag.
- Remove sedta and seinfoflow from the target system after install. These
packages rely on the package python-networkx which is not available in
buildroot.
- Remove the installed apol package and the setoolsgui directory from the
target directory if python-qt5 is not selected.
Other changes:
- Removed all patches, as they are not compatible with the new version of
setools.
- Add COPYING, COPYING.GPL, and COPYING.LGPL to setools.hash
Signed-off-by: Adam Duskett <Adamduskett@outlook.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Wed, 18 Oct 2017 20:23:56 +0000 (22:23 +0200)]
shared-mime-info: need autoreconf
0001-Remove-incorrect-dependency-from-install-data-hook.patch is
patching Makefile.am, so we need to autoreconf. If we don't do this,
we get build failures such as:
configure.ac:3: error: version mismatch. This is Automake 1.15.1,
configure.ac:3: but the definition used by this AM_INIT_AUTOMAKE
configure.ac:3: comes from Automake 1.15. You should recreate
configure.ac:3: aclocal.m4 with aclocal and run automake again.
WARNING: 'automake-1.15' is probably too old.
You should only need it if you modified 'Makefile.am' or
'configure.ac' or m4 files included by 'configure.ac'.
Peter Seiderer [Tue, 17 Oct 2017 19:30:15 +0000 (21:30 +0200)]
manual: clarify license file hash check during legal-info target
Signed-off-by: Peter Seiderer <ps.report@gmx.net> Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Peter Seiderer [Tue, 17 Oct 2017 20:28:03 +0000 (22:28 +0200)]
qt5: bump latest version to 5.9.2
qt5base:
- removed 0001-Fix-error-attribute-target-crc-is-unknown.patch
(upstream committed, see [1])
- removed 0002-examples-fix-compile-without-opengl-support.patch
(upstream committed, see [2])
qt5declarative:
- removed 0001-Fix-alignment-issue-on-ARMv7.patch
(upstream committed, see [3])
- moved 0001-examples-photoviewer-needs-widgets-support.patch to 5.6.2
only (upstream 5.9.2 committed, see [4])
- moved 0002-examples-qquickviewcomparison-and-quickwidget-needs-.patch
to 5.6.2 only (similare patch upstream committed, see [5])
qt5location:
- removed 0001-Fix-plugins-build-dependency.patch
(upstream committed, see [6])
qt5webchannel:
- fix webchannel.js installation to target (the locatinon of the
file webchannel.js changed from src/webchannel/qwebchannel.js
to examples/webchannel/shared/qwebchannel.js, see commit [7])
qt5webengine:
- removed 0001-Always-compile-QWebEnginePage-print.patch
(upstream committed, see [8])
- keep 0002-Load-libEGL-and-libGLES2-symbols-implicitly.patch
(upstream committed, see [9], but reverted afterwards, see [10])
qt5webkit:
- fall back to 5.9.1 (no 5.9.2 package provided, see [11] and [12]).
Joshua Henderson [Tue, 17 Oct 2017 20:28:02 +0000 (22:28 +0200)]
qt5: add license file hashes for all submodules
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com> Reviewed-by: Peter Seiderer <ps.report@gmx.net>
----
Changes v2 --> v3:
- use 'Hashes for license files:' instead of repeated
'Hash for license file' (suggested by Thomas Petazzoni)
Changes v2:
- add reviewed-by and minor commit title change (removed package prefix) Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Romain Naour [Sun, 15 Oct 2017 21:57:35 +0000 (23:57 +0200)]
package/gcc: bump to 5.5.0
Remove xtensa patches included in this release:
872-xtensa-use-unwind-dw2-fde-dip-instead-of-unwind-dw2-.patch
873-xtensa-fix-_Unwind_GetCFA.patch
876-xtensa-Fix-PR-target-78603.patch
877-xtensa-fix-PR-target-82181.patch
Thomas Petazzoni [Tue, 17 Oct 2017 19:46:48 +0000 (21:46 +0200)]
libglib2: needs autoreconf
Patch 0002-disable-tests.patch modifies Makefile.am, so we have to
autoreconf. It hasn't been seen until now, but becomes very clear
since the bump of automake to 1.15.1, as we're seeing build failures
such as:
configure.ac:66: error: version mismatch. This is Automake 1.15.1,
configure.ac:66: but the definition used by this AM_INIT_AUTOMAKE
configure.ac:66: comes from Automake 1.15. You should recreate
configure.ac:66: aclocal.m4 with aclocal and run automake again.
Peter Korsgaard [Thu, 12 Oct 2017 21:17:52 +0000 (23:17 +0200)]
libnss: security bump to version 3.33
Fixes CVE-2017-7805 - Martin Thomson discovered that nss, the Mozilla
Network Security Service library, is prone to a use-after-free vulnerability
in the TLS 1.2 implementation when handshake hashes are generated. A remote
attacker can take advantage of this flaw to cause an application using the
nss library to crash, resulting in a denial of service, or potentially to
execute arbitrary code.
Also add a hash for the license file while we're at it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cam Hutchison [Sun, 15 Oct 2017 00:57:19 +0000 (11:57 +1100)]
ifupdown-scripts: do not install .empty files
ifupdown-scripts has some .empty files to maintain empty directories
in git. Previously this package used to be part of the skeleton which
used SYSTEM_RSYNC to copy the directories to the target. When it was
split into a separate package, cp -a was used to do the copy instead,
which copies the .empty files.
Change to SYSTEM_RSYNC which excludes .empty files.
Signed-off-by: Cam Hutchison <camh@xdna.net> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As stated by the upstream developers, Prosody only supports
lua-5.1 or luajit (which is a lua-5.1 interpreter):
> Response from zash at zash.se:
>
>> I pegged the package to lua 5,1 based on the contents of the
>> INSTALL file. Is this a hard requirement?
>
> Up until Prosody 0.9 Lua 5.1 is required. However LuaJIT
> implements Lua 5.1 so it works.
The license terms are not very consistent: the source files all
state to be "MIT/X11 licensed" and defer to the COPYING file for
details, but that file only has the text for the MIT license.
Thus, we believe the license to be MIT/X11, as stated in the source
files.
This installs the base system with certificates for two domains:
localhost and example.com
The default runtime configuration is tweaked during installation
to properly setup logging and pid-file directories.
Prosody doesn't like being executed as root, and thus the daemon
is executed as the user prosody. The startup script creates the
pid file write location with appropriate permissions.
Signed-off-by: Dushara Jayasinghe <nidujay@gmail.com> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The WITH_PTHREADS_PF option was errantly categorized as a Windows only option.
WITH_PTHREADS_PF actually enables a parallelization framework that utilizes
pthreads to optimize some inner for loops of different OpenCV operations. This
optimization is available on any platform that has pthreads.
Signed-off-by: bradford barr <bradford@density.io> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
flex: rework patches to avoid host/target difference
Currently, the target and host flex packages do not behave the same in
terms of patching: the target variant has a patch hook that disables
building the programs (because they are not needed, and do not build
on no-MMU platforms). However, this hook is obviously not executed for
host-flex, because we really want the host flex binary to be built.
In preparation for the introduction of out-of-tree package build, it
is important that we don't do different things in the patch hooks for
the target and host variant of a given package, because the source
tree will be shared between the target and host builds.
To solve this, we introduce a --disable-program configure option,
through a patch to the flex configure.ac and Makefile.am. This patch
makes the current 0001-flex-disable-documentation.patch no longer
needed.
Furthermore, building the documentation is a PITA: flex.1 depends on
configure.ac and a few other files generated during the build. Touching
flex.1 does not work, because automake will forcibly remove the files
when its prerequisites are too old, so pre-requisites of flex.1 will
always be more recent than flex.1. So, we add a patch that adds a
--disable-doc configure option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[yann.morin.1998@free.fr:
- rebase on-top of master,
- add patch to not build the documentation, because simply touching
flex.1 is no longer enough.
- keep install in target/, for shared builds
] Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Adrian Perez de Castro <aperez@igalia.com> Cc: Arnout Vandecappelle <arnout@mind.be> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upstream wiringpi apparently has some issues with their release
process: their 2.42 and 2.44 tags point to the exact same commit. And
at the 2.44 tag, the VERSION file was not updated to indicate that
it's version 2.44.
A follow-up commit added support for the RPi Zero-W, and fixed the
VERSION file to contain 2.44. So let's use this follow-up commit as
the new version for wiringpi.
This will hopefully clarify things, and avoid confusion such as the
one reported in bug #10391 [1].
Peter Seiderer [Wed, 11 Oct 2017 09:14:52 +0000 (11:14 +0200)]
evemu: fix PATH_MAX related compile failure
Fixes [1] when building with musl:
find_event_devices.c: In function 'find_event_devices':
find_event_devices.c:60:14: error: 'PATH_MAX' undeclared (first use in this function)
char fname[PATH_MAX];
^~~~~~~~
Olivier Schonken [Wed, 11 Oct 2017 15:42:11 +0000 (17:42 +0200)]
mesa3d: allow the VC4 driver to be selected on AArch64
Neon is compulsory on AArch64, and BR2_ARM_CPU_HAS_NEON is false on
AArch64. Therefore, this change is needed to enable building VC4
gallium driver for Rpi3 using AArch64.
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the download directory, when specified with the -d option, is
only used to store the files downloaded by the testing infra, not those
downloaded by Buildroot.
So, we end up with this situation:
BR2_DL_DIR | -d DIR | test downloads | BR downloads
------------+----------+------------------+--------------
unset | unset | [error] | [error]
unset | set | in $(DIR) | in $(TOP_DIR)/dl
set | unset | in $(BR2_DL_DIR) | in $(BR2_DL_DIR)
set | set | in $(DIR) | in $(BR2_DL_DIR)
This is not very consistent.
We change the behaviour so that the value of -d always takes precedence,
and is used by Buildroot as well, giving this new behaviour:
BR2_DL_DIR | -d DIR | test downloads | BR downloads
------------+----------+------------------+--------------
unset | unset | [error] | [error]
unset | set | in $(DIR) | in $(DIR)
set | unset | in $(BR2_DL_DIR) | in $(BR2_DL_DIR)
set | set | in $(DIR) | in $(DIR)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Evgeniy Didin [Tue, 10 Oct 2017 13:31:50 +0000 (16:31 +0300)]
toolchain: add glibc support for ARCv2
Finally there's working ARC port of glibc thanks to Vineet and Cuper!
This port is based on pretty recent glibc's master branch and ARC
changes are being reviewed now in glibc's mailing list.
Thus we again have to use sources from our GitHub but as soon as there's
a glibc release with our patches applied we'll switch to upstream releases
and will drop our glibc GitHub repo alltogether.
Note now we cut tags in glibc repo simultaneously with tags
in Binutils and GCC repos and so to make sure everything works in the best
way we plan to update glibc tag together with Binutils and GCC.
Also note as of today ARCompact (AKA ARCv1 ISA) is not supported in glibc
but we plan to fix it soonish so for now we make glibc intentionally
dependent on archs38.
Also note we are not creating directory "2.26" because all patches for glibc
ver 2.26 applies to arc glibc port.
Signed-off-by: Evgeniy Didin <didin@synopsys.com> CC: Alexey Brodkin <abrodkin@synopsys.com> CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> CC: Waldemar Brodkorb <wbx@openadk.org> CC: Romain Naour <romain.naour@gmail.com> Cc: Cupertino Miranda <cmiranda@synopsys.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Anton Kolesov <akolesov@synopsys.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Adam Duskett [Mon, 9 Oct 2017 18:56:53 +0000 (14:56 -0400)]
gst1-plugins-bad: bump to 1.12.3
Also remove openjpeg-Fix-build-against-openjpeg-2.2.patch, merged
upstreamm as commit
https://cgit.freedesktop.org/gstreamer/gst-plugins-bad/patch/?id=15f24fef53a955c7c76fc966302cb0453732e657.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
[Thomas: fix upstream commit reference, as noted by Peter Seiderer.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Baruch Siach [Tue, 10 Oct 2017 11:54:14 +0000 (14:54 +0300)]
audit: bump to version 2.7.8
Commit d1011f89a18 (audit: update legal info) set the libraries license
to "unclear" because of GPL license text in a few libraries source
files. Upstream audit package commit 239765162fa494 (Correct the
licensing description in lib/ and auparse/ to be LGPL as was always
intended) clarified the license in these files.
Add license files hashes.
Cc: Rahul Bedarkar <rahulbedarkar89@gmail.com> Cc: Adam Duskett <aduskett@gmail.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Rahul Bedarkar <rahulbedarkar89@gmail.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
projects / coffee / buildroot.git / log