Fabio Porcedda [Fri, 27 Jun 2014 12:15:59 +0000 (14:15 +0200)]
Makefile: do not add to targets common dependencies
Remove the rule that adds common dependencies to every target in the
"TARGETS" variable, because all those targets are packages that use the
package infrastructure or they depend on targets that use the package
infrastructure. The package infrastructure already adds common
dependencies. Therefore, this rule is useless.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fabio Porcedda [Fri, 27 Jun 2014 12:15:56 +0000 (14:15 +0200)]
system: convert "system.mk" recipes to "target-finalize" hooks
Convert "system.mk" recipes to "target-finalize" hooks in order to:
- Ensure an ordering even if top-level parallel make is being used.
- Execute "system.mk" commands after the "target-finalize" initial message
is printed so they can be clearly distinguished from packages
building.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add TARGET_FINALIZE_HOOKS to the "target-finalize" rule to be able to
add to it commands as needed.
This is useful for having a nicer output because commands are executed
after the "target-finalize" initial message, also it is useful to ensure
an executing order even when top-level parallel makefile is being used.
Also convert "TARGET_PURGE_LOCALES" to a hook that uses
"TARGET_FINALIZE_HOOKS".
Thomas Petazzoni [Sun, 29 Jun 2014 14:39:45 +0000 (16:39 +0200)]
lzo: bump to version 2.08
According to the LZO website: "LZO 2.08 has been released: small
update that corrects some reported build problems.". And indeed it
fixes the failed compiler conformance tests that have been observed on
the autobuilders.
The Xtensa gcc does not seem to like output on /dev/null. The applied patch
on dhcpcd is thus unusable, and a more verbose version involving a temporary
file is needed.
Reported-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The libicudata library was linked as a "data only" library using the
-nostdlib -nodefaultlibs flags, but this causes problems when using
the library on ARM EABIhf systems. Removing those flags fixes the
problem, and is the solution used by Debian, see
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=653457 for all the
details.
[Thomas: fix commit log and title, add more details to the patch
description.]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@devialet.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Colin Didier [Thu, 19 Jun 2014 16:13:37 +0000 (18:13 +0200)]
devmem2: fix output when _FILE_OFFSET_BITS=64
When built with _FILE_OFFSET_BITS=64, off_t becomes an long long int
and was printed as an unsigned int which lead to a garbled output.
Signed-off-by: Colin Didier <colin.didier@devialet.com> Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@devialet.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
pkgconf: don't double prefix lib/include paths with sysroot
A .pc file could contain statements of the form:
-L/usr/lib
but also:
-L/path/to/sysroot/usr/lib
The latter form typically occurs when the dependency was configured with a
statement like --with-xxx=$(STAGING_DIR)/usr.
pkgconf only expects the first form, and prefixes it with the specified
sysroot. However, this strategy would result in a double sysroot in the
second case:
-L/path/to/sysroot/path/to/sysroot/usr/lib
This patch checks for the presence of the sysroot in the specified -L or -I
directives, and only adds the sysroot when not already present.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com> Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
qt5 performs sed replacements of /usr to $(STAGING_DIR)/usr in .la files.
However, if buildroot itself is located in /usr, then STAGING_DIR also
starts with /usr, and naive replacements of '/usr' can result in paths of
the form:
/usr/buildroot/.../sysroot/usr/buildroot/.../sysroot/...
This patch makes the replacements more careful, by first replacing the known
paths BASE_DIR and STAGING_DIR to tokens, then performing the actual
replacement, and finally replacing the tokens with the corresponding paths.
pkg-generic and pkg-autotools both perform sed replacements of /usr to
$(STAGING_DIR)/usr, in .pc and .la files respectively. However, if buildroot
itself is located in /usr, then STAGING_DIR also starts with /usr, and naive
replacements of '/usr' can result in paths of the form:
/usr/buildroot/.../sysroot/usr/buildroot/.../sysroot/...
This patch makes the replacements more careful, by first replacing the known
paths BASE_DIR and STAGING_DIR to tokens, then performing the actual
replacement, and finally replacing the tokens with the corresponding paths.
Additionally it removes the unnecessary making of a backup copy in
pkg-autotools.
[Thomas: improve pkg-autotools.mk by including the explanation comment
proposed by Arnout.]
Partially-based-on-a-patch-from: Ben Stoltz <benstoltz@gmail.com> Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com> Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Pascal Huerst [Wed, 25 Jun 2014 13:16:13 +0000 (15:16 +0200)]
google-breakpad: new package
[Thomas:
- Introduce a BR2_PACKAGE_GOOGLE_BREAKPAD_ARCH_SUPPORTS Config.in
symbol to be able to easily propagate the architecture
dependencies.
- Wrap the help text, add some more details as suggested by Arnout.
- Propagate the architecture dependencies to the comment, as
suggested by Arnout.
- Remove the dependency of google-breakpad on host-google-breakpad,
since it's not needed.
- Add <pkg>_TARGET = NO, because google-breakpad only installs a
static library, so installation to staging is sufficient.
- Reorder autotools-package/host-autotools-package invocations, as
suggested by Arnout.]
Signed-off-by: Pascal Huerst <pascal.huerst@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Eric Limpens [Sat, 21 Jun 2014 15:58:20 +0000 (17:58 +0200)]
package/pifmrds: new package
We needs three little patches:
- one to make the existing Makefile cross-compile friendly
- one to pass the LDFLAGS at link time
- one to add a missing include
[Thomas: add missing 'depends on BR2_arm' in comment, renumber patches
to start at 0001 and not 0000.]
Signed-off-by: Eric Limpens <limpens@gmail.com>
[yann.morin.1998@free.fr: add .mk header; cleanup and split the
Makefile patch, add missing include; add comments to all patches] Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Eric Le Bihan [Mon, 23 Jun 2014 09:52:06 +0000 (11:52 +0200)]
systemd: rework network/tty units installation
The installation of the network.service and serial-getty.service unit
files are now performed via the <pkg>_INIT_SYSTEMD mechanism instead of
an installation hook.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr> Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sun, 15 Jun 2014 13:33:48 +0000 (15:33 +0200)]
at91bootstrap3: bump to v3.6.2
In preparation to add support for the SAMA5D3 Xplained board, this
commit bumps the version of the at91bootstrap3 bootloader to
v3.6.2. While doing this, it also:
- Allows this bootloader on Cortex-A5 based platforms, since SAMA5D3
are based on Cortex-A5.
- Removes a patch that no longer applies, and which has been taken
into account in at91bootstrap3 upstream.
- Switches to the upstream Github location as the source.
- Updates the installation commands to match upstream changes in the
installation process.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The graph-depends commands cd into the CONFIG_DIR and run the script
from there. However, this means that when $(O) is a relative path, it
will no longer be correct. Therefore, use $(BASE_DIR) instead of $(O).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
graph-depends: remove unnecessary redirect of stderr
It hides any error messages reported by make.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Acked-by: Samuel Martin <s.martin49@gmail.com> Tested-by: Samuel Martin <s.martin49@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
graph-depends: support calling from recursive make
The graph-depends script calls make. If the outer make was called
recursively, or if it was called with '-C <somedir>', then the
environment will contain "MAKEFLAGS=w --". Therefore, the recursive
make prints 'Entering' and 'Leaving' messages, which clobbers the
output for dot.
To avoid this, add "--no-print-directory" to the recursive make
arguments. Since we require GNU make 3.81, we can be sure that this
option is available.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Ryan Barnett [Thu, 26 Jun 2014 13:17:39 +0000 (08:17 -0500)]
pkg-download: fix svn download for deleted path
If a SVN path has been deleted in a future revision, downloading a
package's source will fail using 'svn checkout -r'. Fix using
URL@REV syntax since the SVN command will then verify the path at the
specified version. Without using the URL@REV syntax, the SVN command
will attempt to verify the path exists on the the HEAD revision before
checking out the path at the specified revision.
Error seen if SVN path has been deleted in HEAD using svn checkout -r:
svn: E160013: '/svn/path/' path not found
Signed-off-by: Ryan Barnett <ryan.barnett@rockwellcollins.com> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Sat, 28 Jun 2014 10:33:52 +0000 (07:33 -0300)]
radvd: bump to version 1.14
This bump reverts e92fb1f90f1b51cd111105d86c058fdca6f3434a (radvd: fix
build against older glibc) since Gustavo has contributed a fix
upstream, which was merged in the 1.14 release of radvd.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Fri, 27 Jun 2014 20:09:26 +0000 (17:09 -0300)]
liboauth: bump to version 1.0.3
Add license information as well.
It could be "or GPL" as well but since we link to openssl that's a murky path
as stated in the README so just leave it at MIT.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Fri, 27 Jun 2014 21:19:37 +0000 (18:19 -0300)]
jquery-validation: bump to version 1.12.0
Switch homepage and upstream source, add license file (just mentions
it's under MIT, better than none). Also fixes:
http://autobuild.buildroot.net/results/a2e/a2ed2efe09b12612247a21c5fa3c129f58c9afd8/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Peter: drop unused 0.9.30 patch, host-lua dependency and lua2c LDFLAGS handling] Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Tue, 24 Jun 2014 18:55:42 +0000 (15:55 -0300)]
socketcand: add license information
[Peter: use socketcand.c as license file] Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Thu, 26 Jun 2014 10:05:31 +0000 (07:05 -0300)]
whois: add extra libs for libiconv
The main makefile doesn't check/do anything about linking properly, so
add -liconv to LIBS when it's used. Fixes:
http://autobuild.buildroot.net/results/7e5/7e551efacfa16b9e1915748a2f66fd1021d5bb49/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Tue, 24 Jun 2014 17:33:10 +0000 (14:33 -0300)]
crda: bump to version 3.13
[Peter: adjust patch to also drop ldconfig call] Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>