Baruch Siach [Thu, 15 Mar 2018 18:06:19 +0000 (20:06 +0200)]
libcurl: security bump to version 7.59.0
CVE-2018-1000120: curl could be fooled into writing a zero byte out of
bounds when curl is told to work on an FTP URL with the setting to only
issue a single CWD command, if the directory part of the URL contains a
"%00" sequence.
https://curl.haxx.se/docs/adv_2018-9cd6.html
CVE-2018-1000121: curl might dereference a near-NULL address when
getting an LDAP URL.
https://curl.haxx.se/docs/adv_2018-97a2.html
CVE-2018-1000122: When asked to transfer an RTSP URL, curl could
calculate a wrong data length to copy from the read buffer.
https://curl.haxx.se/docs/adv_2018-b047.html
Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Jan Kundrát [Wed, 14 Mar 2018 16:58:40 +0000 (17:58 +0100)]
package/busybox: Unbreak the `tar` implementation
The `tar` implementation in Busybox 1.28.0 and 1.28.1 won't extract a
rootfs with some symlinks that appear to look "dangerous". This
completely (and silently!) breaks on-target updates via RAUC for me, for
example.
In the meanwhile, upstream already reverted the commit in question
(in their commit a84db18fc71d09e801df0ebca048d82e90b32c6a), so this
patch simply applies that revert in Buildroot. The fix has not made it
to a release, yet.
Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Bug: https://bugs.busybox.net/show_bug.cgi?id=8411
Bug: https://github.com/rauc/rauc/issues/249 Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Mon, 12 Mar 2018 22:36:03 +0000 (23:36 +0100)]
pkg-virtual.mk: explicitly set <pkg>_VERSION / _SOURCE for robustness
Recently a build failure was reported which was traced back to to the fact
that the user had a TOOLCHAIN_VERSION environment variable set which leads
to a strange looking error message:
toolchain/toolchain/toolchain.mk:40: *** TOOLCHAIN_SITE cannot be empty when
TOOLCHAIN_SOURCE is not. Stop.
Environment variables automatically gets converted to make variables by GNU
make - E.G. from the manual
(https://www.gnu.org/software/make/manual/html_node/Environment.html):
Variables in make can come from the environment in which make is run. Every
environment variable that make sees when it starts up is transformed into a
make variable with the same name and value
So we end up in make with TOOLCHAIN_VERSION set to the value of the
environment variable. As virtual packages do not have a version, there is
no explicit TOOLCHAIN_VERSION = .. line in toolchain.mk overriding this
value, and the logic in package/pkg-generic.mk sets a default value for
TOOLCHAIN_SOURCE when TOOLCHAIN_VERSION is set, and finally errors out as
TOOLCHAIN_SITE isn't set.
As a workaround, explicitly set <pkg>_VERSION and <pkg>_SOURCE to the empty
string in the virtual package infrastructure.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This script comes from the kernel source, so ignore any code style
warnings for it in order to keep it as close as possible to the original
one, making synchronization between repos easier.
The option --exclude for flake8/pycodestyle is an absolute list and has
a default, so ideally the default values should be added too.
But the use cases for flake8 in the tree are:
- when developing a new script or changing an existing one, the
developer calls flake8 only on that script;
- in the GitLab job, a list of all Python files to be tested is created
and then passed to flake8.
None of these involve calling 'flake8' without parameters, so don't care
about adding the default value.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com> Cc: Marcus Folkesson <marcus.folkesson@gmail.com> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use the latest version of the tool because it is actively maintained.
But use a fixed version of the tool and its dependencies to get stable
results. It can be manually bumped from time to time.
Before installing any Python packages, ensure pip, setuptools, and wheel
are up to date as recommended in the docs [1].
Fix these warnings:
E122 continuation line missing indentation or outdented
E301 expected 1 blank line, found 0
E302 expected 2 blank lines, found 1
F401 'os' imported but unused
Fix these warnings:
E129 visually indented line with same indent as next logical line
E302 expected 2 blank lines, found 1
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com> Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Cc: Yann E. MORIN <yann.morin.1998@free.fr> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix these warnings:
E201 whitespace after '['
E202 whitespace before ']'
E501 line too long (138 > 132 characters)
-> isolate the common part of the external toolchain url in a variable
to make the long lines shorter and more readable.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com> Cc: Arnout Vandecappelle <arnout@mind.be> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
CVE-2018-1057: Authenticated users might change any other users'
passwords, including administrative users and privileged service
accounts (eg Domain Controllers).
Giulio Benetti [Tue, 13 Mar 2018 16:08:08 +0000 (17:08 +0100)]
sunxi-mali-mainline-driver: bump version
For stop using cma.
git shortlog --invert-grep --grep travis --no-merges 94ccbc8924c12a818d61d36a4b389b74a89fde3c..
Maxime Ripard (1):
mali: Stop using the reserved-memory region to setup the fb area
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Baruch Siach [Tue, 13 Mar 2018 12:54:01 +0000 (14:54 +0200)]
uclibc-ng-test: fix build with musl and older kernel headers
musl libc provides its own system call macros, including
preadv2/pwritev2. Having these macros defined is not enough to determine
availability of other related macros in kernel headers.
Jan Kundrát [Mon, 12 Mar 2018 18:41:00 +0000 (19:41 +0100)]
cmake: Fix RPATH for host libraries built by CMake
The host shared libraries produced by CMake were missing a proper
DT_RPATH. That became a problem because the DT_RPATH handling is not
transitive by design.
Consider the following scenario:
- pkg-a provides a library (`liba`) which links to `libpcre`
- pkg-b provides a binary (`foo`) and a shared library (`libb`) which is
needed by that binary
- `libb` links to `liba`
- pkg-a and pkg-b are both built by CMake
In this scenario, `foo` is correctly marked with DT_RPATH pointing to
host/lib/, but that path is not used when (recursively) resolving PCRE's
symbols in `liba`. When attempting to run the `foo` binary, the linker
correctly finds both `liba` and `libb`, but it cannot find the
libpcre.so as built by Buildroot for host.
Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz> Reviewed-by: Samuel Martin <s.martin49@gmail.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Baruch Siach [Tue, 13 Mar 2018 07:19:39 +0000 (09:19 +0200)]
trinity: fix build with glibc 2.27
glibc 2.27 added a system call wrapper for memfd_create() which collides
with the local definition of the same symbol in trinity. Add a patch to
detect the presence of memfd_create(), and avoid collision.
Stefan Becker [Mon, 12 Mar 2018 12:34:09 +0000 (14:34 +0200)]
uboot: fix build for older uboot source trees
The change in commit bf733342324b414a1142b57781504111f81c97ea only works
for newer uboot source trees. Add a check that scripts/dtc/libfdt
directory exists before making this change.
[Peter: add comment explaining why] Signed-off-by: Stefan Becker <chemobejk@gmail.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
docker-proxy is needed by docker-engine at runtime, and was
previously not included. This leads to the following error
when attempting to port-map ports to a container:
$ docker run -p 8080:8080 nginx
docker: Error response from daemon: driver failed programming external
connectivity on endpoint:
exec: "docker-proxy": executable file not found in $PATH.
Docker expects the docker-proxy binary to exist in the PATH.
Signed-off-by: Christian Stewart <christian@paral.in> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add docker-proxy package to Buildroot. Needed by docker-engine at
runtime, and previously not included. This leads to the following error
when attempting to port-map ports to a container:
$ docker run -p 8080:8080 nginx
docker: Error response from daemon: driver failed programming external
connectivity on endpoint:
exec: "docker-proxy": executable file not found in $PATH.
Docker expects the docker-proxy binary to exist in the PATH.
Signed-off-by: Christian Stewart <christian@paral.in> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
André Hentschel [Fri, 9 Mar 2018 10:20:42 +0000 (11:20 +0100)]
wine: Drop glibc requirement
I noticed it's not needed anymore, musl went upstream at some point and uClibc is now build with bessel functions:
https://git.buildroot.net/buildroot/commit/package/uclibc?id=de56d58e5d26d78161ca3b7a1a2a4decfe4e89db
Signed-off-by: André Hentschel <nerv@dawncrow.de> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Matt Weber [Fri, 9 Mar 2018 03:10:06 +0000 (21:10 -0600)]
configs/freescale_t1040d4rdb_defconfig: new board
The T1 QoriQ from NXP has had a few varients of RDB dev boards.
This target is against the latest D4RDB version. Any of the
other versions before D4RDB (plain RDB), may require backing off
the uboot version to SDK 1.6 and/or adjusting the kernel dtb used.
This board configuration provides an upstream kernel build which
has been verified to boot on target.
The target assumes the user still uses the NXP suggested prebuilts
in the SDK2.0 (last release for PowerPC). If a uboot rebuild is
required, the source for SDK2.0 can be found in the following repo.
Matt Weber [Fri, 9 Mar 2018 02:36:38 +0000 (20:36 -0600)]
configs/freescale_p1025twr_defconfig: new board
Replacing the p1010rdb, this board is based on the tower development
system still available by NXP. The board is setup to track upstream
Linux and has been bumped from 4.1 to 4.15 (compared to p1010).
The target does not build uboot and assumes the user still uses the NXP
suggested prebuilts in the SDK2.0 (last release for PowerPC). If a
uboot is required, the source for SDK2.0 can be found in the following
repo.
http://git.freescale.com/git/cgit.cgi/ppc/sdk/u-boot.git/tag/?id=fsl-sdk-v2.0-1703
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Vivien Didelot [Mon, 5 Mar 2018 17:15:04 +0000 (12:15 -0500)]
board/technologic/ts5x00: rename to ts5500
Rename the confusing and misleading ts5x00 directory to a real reference
platform name, ts5500. The readme.txt file already states the support
for both TS-5500 and TS-5400 platforms.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Vivien Didelot [Mon, 5 Mar 2018 17:15:03 +0000 (12:15 -0500)]
board/technologic/ts5x00: bump kernel to 4.14
Bump the 3.17 kernel used for the Technologic Systems TS-5500 platform
to the latest LTS kernel 4.14.
This fixes the ts5x00_defconfig build with GCC 6.x.
The linux-3.17.config file has been renamed to linux-4.14.config to
match the new kernel version, and its changes are the result of make
linux-update-defconfig. However only comments are affected.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
uboot-tools: backport patch fixing build failure with libfdt-devel installed
U-Boot host programs fail to build when libfdt-devel is installed
system-wide, with errors like this:
HOSTCC tools/aisimage.o
In file included from tools/../include/../lib/libfdt/libfdt.h:10:0,
from tools/../include/libfdt.h:1,
from tools/fdt_host.h:11,
from tools/imagetool.h:24,
from tools/aisimage.c:8:
/usr/include/libfdt_env.h:70:30: error: conflicting types for ‘fdt64_t’
typedef uint64_t FDT_BITWISE fdt64_t;
^~~~~~~
In file included from <command-line>:0:0:
././include/libfdt_env.h:19:16: note: previous declaration of ‘fdt64_t’ was here
typedef __be64 fdt64_t;
^~~~~~~
In file included from ././include/libfdt_env.h:12:0,
from <command-line>:0:
/usr/include/libfdt_env.h:90:24: error: expected ‘)’ before ‘x’
static inline uint32_t fdt32_to_cpu(fdt32_t x)
^
This commit backports an upstream patch that fixes this problem.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
uboot: fix build when libfdt-devel is installed system-wide
When libfdt-devel is installed system-wide, the build of U-Boot host
programs currently fails with lots of:
HOSTCC tools/aisimage.o
In file included from tools/../include/../lib/libfdt/libfdt.h:10:0,
from tools/../include/libfdt.h:1,
from tools/fdt_host.h:11,
from tools/imagetool.h:24,
from tools/aisimage.c:8:
/usr/include/libfdt_env.h:70:30: error: conflicting types for ‘fdt64_t’
typedef uint64_t FDT_BITWISE fdt64_t;
^~~~~~~
In file included from <command-line>:0:0:
././include/libfdt_env.h:19:16: note: previous declaration of ‘fdt64_t’ was here
typedef __be64 fdt64_t;
^~~~~~~
In file included from ././include/libfdt_env.h:12:0,
from <command-line>:0:
/usr/include/libfdt_env.h:90:24: error: expected ‘)’ before ‘x’
static inline uint32_t fdt32_to_cpu(fdt32_t x)
^
This commit adds a fixup in the U-Boot code to fix this problem. The
fixup is equivalent to applying upstream commit
http://git.denx.de/?p=u-boot.git;a=commitdiff;h=e0d20dc1521e74b82dbd69be53a048847798a90a,
but we can't use a patch for the uboot package, since people are using
arbitrary versions.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fabrice Fontaine [Sat, 10 Mar 2018 21:45:34 +0000 (22:45 +0100)]
libmpdclient: fix install
By default, meson adds the build machine architecture for installation,
see: https://github.com/mesonbuild/meson/issues/2535
Use --libdir to override this default behavior
Remove mkdata hook as this is not needed since version 1.2.3.
Indeed, when CMAKE_CROSSCOMPILING is defined, ympd will use a perl
script (mkdata.pl) instead of mkdata binary
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Adam Duskett [Fri, 9 Mar 2018 13:18:16 +0000 (08:18 -0500)]
libcpprestsdk: fix template whitespace-syntax
some files don't have a space inbetween the '<' and '::' charachters, which
will cause build failures on older toolchains. Adding a space inbetween these
two characters fixes the issue.
fixes:
http://autobuild.buildroot.net/results/797a9b5fdf6ab0f16f2249324b48292dfab61d9f Signed-off-by: Adam Duskett <aduskett@gmail.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
cups-filters: Add patch to remove relative symbolic link from install
On older build systems with old coreutils, using relative symbolic link
(ln -r) does not work, and causes failed builds. Workaround is to use
normal symbolic link with a relative path. e.g. ../../$(BINDIR)
This fix is dependent on bumping cups-filters version to 1.20.1 because
of autotools issue with Makefile.am changes.
Timo Ketola [Thu, 8 Mar 2018 10:42:33 +0000 (12:42 +0200)]
fbgrab: Fix some problems in the patch metadata
The patch description was missing Upstream-Status tag. It was given in the
commit which added this patch but not in the patch itself as should be.
Signed-off-by tag accidentally didn't follow the usual format.
Signed-off-by: Timo Ketola <timo.ketola@exertus.fi> Reviewed-by: Adrian Perez de Castro <aperez@igalia.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Anssi Hannula [Thu, 8 Mar 2018 14:25:09 +0000 (16:25 +0200)]
systemd: do not use host system-uid/gid ranges
systemd meson.build uses values from host /etc/login.defs if
system-uid-max and system-gid-max build options are not explicitly
specified.
Avoid that by setting system-uid-max and system-gid-max to 999 which is
the systemd default if SYSTEM_UID_MAX and SYSTEM_GID_MAX are not set in
/etc/login.defs.
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Fri, 9 Mar 2018 14:30:43 +0000 (15:30 +0100)]
utils/scanpypi: correctly handle license dirs in subdirs for .hash files
create_hash_file() used basename(licensefile) when it writes the entry for
the license file in the .hash, which is obviously not correct when license
file is locate in a sub directory.
Instead copy the logic from __create_mk_license() to strip the directory
prefix from the absolute filename instead.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com> Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Carlos Santos [Fri, 2 Feb 2018 15:56:11 +0000 (13:56 -0200)]
tpm2-tss: new package
OSS implementation of the TCG TPM2 Software Stack (TSS2). This stack
consists of the following layers from top to bottom:
* System API (SAPI) as described in the system level API and TPM command
transmission interface specification. This API is a 1-to-1 mapping of
the TPM2 commands documented in Part 3 of the TPM2 specification.
Additionally there are asynchronous versions of each command. These
asynchronous variants may be useful for integration into event-driven
programming environments. Both the synchronous and asynchronous API
are exposed through a single library: libsapi.
* TPM Command Transmission Interface (TCTI) that is described in the
same specification. This API provides a standard interface to transmit
/ receive TPM command / response buffers. It is expected that any
number of libraries implementing the TCTI API will be implemented as a
way to abstract various platform specific IPC mechanisms. Currently
this repository provides two TCTI implementations: libtcti-device and
libtcti-socket. The prior should be used for direct access to the TPM
through the Linux kernel driver. The later implements the protocol
exposed by the Microsoft software TPM2 simulator.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
v2.0.0 has been released after commit 1d949e4bf79b694ea883c325f5813e87ddc2a687, which we currently use, and
it has the advantage of fixing the build with recent versions of czmq.
Yann E. MORIN [Mon, 26 Feb 2018 17:47:21 +0000 (18:47 +0100)]
package/linux: drop useless intermediate DTS booleans
Just use whatever the user specified in the list. An empty list means no
DTS was specified.
No need to add legacy option, as the behaviour does not change.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Simon van der Veldt <simon.vanderveldt@gmail.com> Cc: Arnout Vandecappelle <arnout@mind.be> Cc: Peter Korsgaard <peter@korsgaard.com> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Tested-by: Joshua Henderson <joshua.henderson@microchip.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Timo Ketola [Thu, 8 Mar 2018 07:22:05 +0000 (09:22 +0200)]
fbgrab: add patch fixing pixel format report
When verbosive, fbgrab reports pixel format. Green and blue offset and
msb_right fields are accidentally swapped there. This commit adds a patch
which straightens them up.
projects / coffee / buildroot.git / log