Danomi Manchego [Wed, 4 Jun 2014 01:53:24 +0000 (21:53 -0400)]
busybox: enable noclobber option in install.sh
We support a busybox-menuconfig target so that the BusyBox
configuration can be adjusted as needed. However, depending
on what other packages are enabled, re-installing BusyBox
symlinks that duplicate "real" apps after the configuration
change can result in bad behaviors:
* At best, the BusyBox applet will be used after the
install, versus the desired "real" app.
* At worst, the built rootfs can become unbootable.
The BusyBox install.sh has some capability to avoid this issue
by means of a --noclobber option. By default, this option is
disabled. When enabled, the install.sh will not overwrite a
target file with a symlink or hardlink, be it an actual file
or a previously installed BusyBox link.
The install.sh's argument processing is somewhat broken, so this
patch simply changes the default value of the noclobber option
to on, rather than add --noclobber to the install.sh invocation.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Simon Dawson [Mon, 2 Jun 2014 16:02:45 +0000 (17:02 +0100)]
manual: make consistent references to package metadata information
The de facto standard terminology in the manual appears to be "package
metadata information"; fix a couple of inconsistent references to package
"meta-information" and "meta information".
Signed-off-by: Simon Dawson <spdawson@gmail.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Wed, 4 Jun 2014 06:33:17 +0000 (08:33 +0200)]
fs/common.mk: unbreak .xz compression when host-xz isn't built
Closes #7160
Since f46f81de1315 (Don't build host-xz needlessly), host-xz is no longer
unconditionally built when xz fs compression is requested, so don't
explicitly refer to it.
Instead, rely on our check-host-xzcat logic to ensure xz is available and
set the path to ensure our host variant gets picked up if not available on
the build machine.
While we're at it, get rid of the now unused XZ variable.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Alexey Brodkin [Tue, 20 May 2014 14:54:36 +0000 (18:54 +0400)]
oprofile: bump to version 0.9.9
Relese notes for 0.9.9 release are avaialble here:
http://oprofile.sourceforge.net/release-notes/oprofile-0.9.9
This release adds support for ARC architecture.
Also introduces new "ocount" program for collection of raw event counts.
With release of 0.9.9 we may drop back-ported patches:
oprofile-002-no-query-modules.patch - liblegacy was removed since 2.4 kernels
are no longer supported
http://sourceforge.net/p/oprofile/oprofile/ci/fcb818623bf1a638ef4f93dca9e90f8651899bf3/
But in 0.9.9 was introduced build breakage which was fixed later so adding
another back-ported patch
oprofile-002-Fix-compile-error-on-ppc-uClibc-platform-AT_BASE_PLA.patch
http://sourceforge.net/p/oprofile/oprofile/ci/08241f1b2c5a4d48020c82b509dc1076f51bf0bd/
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Gustavo Zacarias <gustavo@zacarias.com.ar> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com> Cc: Simon Dawson <spdawson@gmail.com> Cc: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Kim De Mey [Tue, 3 Jun 2014 12:52:30 +0000 (14:52 +0200)]
libcgroup: bump to version 0.41 and use LIBCGROUP_VERSION
Signed-off-by: Kim De Mey <kim.demey@gmail.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2014-0178 (Malformed FSCTL_SRV_ENUMERATE_SNAPSHOTS response)
and CVE-2014-0239 (dns: Don't reply to replies).
Patches 0001 and 0002 are now part of the 4.1.x release branch.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Baruch Siach [Tue, 3 Jun 2014 04:12:54 +0000 (07:12 +0300)]
uclibc: remove unused patch
Since commit c31d5bfdecf (uclibc: arc: bump to arc-4.8-R3 release) uClibc
version f37101d94284 is no longer used for ARC. Remove a version specific
patch.
Cc: Anton Kolesov <Anton.Kolesov@synopsys.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The calao_qil_a9260 was not specifying an explicit kernel version, so
it ended up downloading the latest kernel version, and therefore fail
to apply the patches. This commit changes the defconfig to used a
fixed kernel version, so that the patches apply properly. It fixes a
Jenkins build failure that has been occuring since quite some time.
While we're at it, also lock down the version of the kernel headers,
as noticed by Peter Korsgaard.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Mon, 2 Jun 2014 21:13:54 +0000 (23:13 +0200)]
libinput: fix build for older kernel headers
Provide a fallback definition for KEY_MICMUTE (which was added in 3.1) and
fix the fallback definition for KEY_LIGHTS_TOGGLE (which was added in 3.10).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Yann E. MORIN [Sun, 1 Jun 2014 21:43:46 +0000 (23:43 +0200)]
package/weston: libxkbcommon is optional
It is possible to build weston without libxkbcommon, for example
if using an input method that is not an hardware keyboard (e.g. a
virtual keyboard, or none at all.)
Make it optional.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Yann E. MORIN [Sun, 1 Jun 2014 21:43:45 +0000 (23:43 +0200)]
package/weston: bump version
Bump to the recently -released 1.5.0.
Remove existing patches, they are no longer needed:
- weston-0000-compositor-rpi-fix-input-initialization.patch was a
back-port of an upstream fix, so no longer needed,
- weston-0003-dont-build-tests.patch no longer applies due to a
complete rewrite of Makefile.am, but it seems tests now build fine
even without EGL support: there is code in the Makefile.am to
explicitly handle that case
Add a new patch from upstream to avoid a use-after-free situation.
So, it's no longer needed to autoreconf.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Simon Dawson [Sat, 31 May 2014 07:55:35 +0000 (08:55 +0100)]
replace references to Busybox with BusyBox
The correct capitalised form appears to be "BusyBox" rather than "Busybox";
fix all references to the latter form. (Most such references occur in the
manual and in commentary in package makefiles.)
Signed-off-by: Simon Dawson <spdawson@gmail.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Seiderer [Thu, 29 May 2014 20:04:35 +0000 (22:04 +0200)]
dillo: new package
[Peter: drop redundant ipv6 handling, whitespace issues] Signed-off-by: Peter Seiderer <ps.report@gmx.net> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Yann E. MORIN [Sun, 1 Jun 2014 21:03:25 +0000 (23:03 +0200)]
package/rpi-firmware: bump
Yet another bump for the Raspberry Pi firmware:
- HDMI: EDID override; HDCP fix; add command to control power to HDMI phy;
fixes to mode selection
- GPU: enable use of HW cursor; fix for GLES FFT compliance; fix scaling;
remove arbitrary restrictions on output sizes
- video-decode: better handle corrupted h264 streams, better allocate memory
- misc: choose composite video when HDMI is not plugged
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Wed, 28 May 2014 20:12:39 +0000 (17:12 -0300)]
ncurses: enable parallel build
Using a trick taken from gentoo enable parallel build when building for
the target to reduce the build time for my test case from about 54s to
32s on a dual-core laptop.
[Peter: add comment explaining why] Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Samuel Martin [Sun, 1 Jun 2014 09:24:33 +0000 (11:24 +0200)]
qhull: do not override CMAKE_BUILD_TYPE
This flag is already correctly set by the cmake-package infrastructure.
Signed-off-by: Samuel Martin <s.martin49@gmail.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Samuel Martin [Sun, 1 Jun 2014 09:24:32 +0000 (11:24 +0200)]
flann: do not override CMAKE_BUILD_TYPE
This flag is already correctly set by the cmake-package infrastructure.
Signed-off-by: Samuel Martin <s.martin49@gmail.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Samuel Martin [Sun, 1 Jun 2014 09:24:31 +0000 (11:24 +0200)]
opencv: do not override CMAKE_BUILD_TYPE
This flag is already correctly set by the cmake-package infrastructure.
Signed-off-by: Samuel Martin <s.martin49@gmail.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Samuel Martin [Sun, 1 Jun 2014 09:24:30 +0000 (11:24 +0200)]
openpowerlink: do not override CMAKE_BUILD_TYPE
This flag is already correctly set by the cmake-package infrastructure.
Signed-off-by: Samuel Martin <s.martin49@gmail.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Samuel Martin [Sun, 1 Jun 2014 09:24:29 +0000 (11:24 +0200)]
pkg-cmake.mk: globally drive the CMAKE_BUILD_TYPE flag using BR2_ENABLE_DEBUG
This CMake flag is usually used to adjust compiler flags (like: -Ox, -g,
etc).
So, it makes sense for Buildroot to globally drive this CMake flags in
the cmake-package infrastructure.
However, if a package prefer overriding this default setting, it still
can via the <PKG>_CONF_OPT variable.
Signed-off-by: Samuel Martin <s.martin49@gmail.com> Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Tested-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Samuel Martin [Sun, 1 Jun 2014 09:24:28 +0000 (11:24 +0200)]
pkg-cmake.mk: globally disable BUILD_TESTING flag
This CMake flag is used to enable tests. It may not disable the test
programs from being built, but it controls the test execution.
Since we don't care about building the tests (and usually disable them
when possible), make sure Buildroot won't try to run them.
Signed-off-by: Samuel Martin <s.martin49@gmail.com> Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Samuel Martin [Sun, 1 Jun 2014 09:24:25 +0000 (11:24 +0200)]
pkg-cmake.mk: enable ccache for cmake packages
This patch updates the generated toolchainfile.cmake to use ccache.
When toolchainfile.cmake is used inside Buildroot, using ccache during
the build is driven by a CMake knob: USE_CCACHE, automatically set by
the cmake-package infrastructure and reflecting the BR2_CCACHE value.
Since this toolchainefile.cmake file can be used outside Buildroot, and
this file also set a couple of things (among these: the sysroot cflag,
some pkg-config environment variables), it is important to set the
compiler variables as well to keep the consistency of the
cross-compilation configuration.
So, when it is used outside Buildroot, using ccache for the build is
driven by the ccache program availability.
Note that using ccache for the build is achieved by setting the *_ARG1
CMake variables to let CMake use ccache without failing in detecting
the compiler.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Samuel Martin <s.martin49@gmail.com> Cc: Luca Ceresoli <luca@lucaceresoli.net> Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Samuel Martin [Sun, 1 Jun 2014 09:24:24 +0000 (11:24 +0200)]
pkg-cmake.mk: do not hardcode absolute path in toolchainfile.cmake
The patch allows sharing or moving the toolchains.
This is a step toward making the toolchain/sdk relocatable.
Closes #6818
[Peter: reword comment as suggested by Thomas] Signed-off-by: Samuel Martin <s.martin49@gmail.com> Cc: Uwe Strempel <u.strempel@googlemail.com> Cc: Arnout Vandecappelle <arnout@mind.be> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Samuel Martin [Sun, 1 Jun 2014 09:24:23 +0000 (11:24 +0200)]
pkg-cmake.mk: refactor the toolchainfile.cmake generation
This patch introduces a toolchainfile.cmake.in template which is filled
by Buildroot.
Using a toolchainfile.cmake.in template file allows to avoid overloading
quoting and/or escaping and it becomes much more similar to the
resulting file.
This patch also cleans up the quoting style.
[Peter: drop stdin redirect as suggested by Thomas] Signed-off-by: Samuel Martin <s.martin49@gmail.com> Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Cc: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gcc: switch to gcc 4.8.x as the default compiler version
gcc 4.7.x is going to be retired soon, and now that gcc 4.9.0 is out,
it's time for Buildroot to switch to gcc 4.8.x as the default gcc
compiler version.
See https://gcc.gnu.org/ml/gcc/2014-05/msg00324.html for details about
gcc 4.7.x life cycle.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
mpg123: bump to 1.20.0, providing better optimizations for ARM and AArch64
As suggested by Gustavo, this patch bumps mpg123 to 1.20.0, and
therefore superseds the patch initially provided by Sven Neumann. In
1.20.0, there is a new CPU type arm_fpu, which will compile code for
both VFP and NEON, and choose at runtime which one to use.
Similarly for AArch64, the option --with-cpu=aarch64 will compile both
the NEON and generic decoders, and select at runtime which one to use.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
These are already in toolchain/toolchain-buildroot/Config.in and since
package/glibc/Config.in is filtered by BR2_TOOLCHAIN_USES_GLIBC there's
no need to duplicate this.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
reenable microblaze little endian for internal musl toolchain
The assumption that musl libc does not support microblaze
little endian mode is wrong. See
http://git.musl-libc.org/cgit/musl/tree/configure line
number 447-448.
Tested with qemu. Just revert previous commit as suggested by
Thomas Petazzoni.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Heiko Abraham [Fri, 30 May 2014 22:10:38 +0000 (00:10 +0200)]
Improve tar check if bsdtar is installed
If bsdtar is installed, fix script error for tar version detection.
bsdtar does not provide all expected command line (long) options
like "--hard-dereference". To ensure compatibility, mark version
of tar as 'invalid' and trigger build of 'host-tar'.
[Peter; slightly reworded commit text] Signed-off-by: Heiko Abraham <abrahamh@web.de> Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
projects / coffee / buildroot.git / log