support/misc: Adding Vagrant file for provisioning
This patch adds a Vagrant file to buildroot. With this file
you can provision a complete buildroot developing environment
in minutes on all major platforms (Linux/Mac/Windows).
[Peter: bump to 2GB RAM, hardcode Buildroot release, add unzip,
drop website update and tweak manual text as suggested by Yann] Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
toolchain: copy_toolchain_lib_root: rename LIBSPATH to LIBPATHS
LIBSPATH is populated based on a find with a pattern that can look like:
libfoo*.so
and thus the output of the find will contain all file paths that match this
pattern.
Unfortunately, the name LIBSPATH suggests that only one entry is returned,
rather than possibly multiple.
As this code is quite complex, use the more accurate name LIBPATHS iso
LIBSPATH.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yegor Yefremov [Tue, 5 Jan 2016 07:17:24 +0000 (08:17 +0100)]
python-cffi: add host variant
Host variant is needed to cross-compile CFFI based C library wrappers.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas:
- add dependency on host-pkgconf for the host package variant.
- add various environment variables needed to make pkg-config behave
properly when building host-python-cffi. Otherwise, pkg-config
returns values that are appropriate to build things for the target,
and the build fails.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yegor Yefremov [Tue, 5 Jan 2016 07:17:22 +0000 (08:17 +0100)]
libffi: fix headers location for host-libffi
There is a special hook for target-libffi, that moves headers
from /usr/lib/libffi-version/include to /usr/include. This patch
adds the same procedure for host-libffi.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas:
- factorize code between the staging headers cleanup and the host
headers cleanup.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The LIBFFI_MOVE_STAGING_HEADERS function is responsible for moving
around libffi headers to a standard location. Once this is done, it
removes the no longer used directory, but does so in $(TARGET_DIR) and
not $(STAGING_DIR). This directory is already cleaned up in
$(TARGET_DIR) in the LIBFFI_REMOVE_TARGET_HEADERS post-install target
hook.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mauro Condarelli <mc5686@mclink.it> Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas:
- remove excessive empty new line at the end of Config.in
- specify BSD-3c as the license, since it's the variant being used,
and it's more specific than just BSD.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mauro Condarelli <mc5686@mclink.it> Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas:
- rename the .mk file to carry the proper name
- rewrap Config.in help text to use the proper length and avoid a
trailing space
- remove excessive empty new line at the end of Config.in
- specify BSD-3c as the license, since it's the variant being used,
and it's more specific than just BSD.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mauro Condarelli <mc5686@mclink.it> Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas:
- rewrap Config.in help text, lines were slightly too long
- remove excessive empty line at end of Config.in
- specify BSD-3c as the license, since BSD is not specific enough.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libpcap can depend on other libraries like libusb and doesn't support
pkgconfig, so add those libraries to LIBS when building statically.
Fixes:
http://autobuild.buildroot.net/results/b4a/b4a3d00e9673a7aacc663c81de1d8e887a17951d/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Thomas: switch to using the upstreamed Github patch.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gary Bisson [Mon, 1 Feb 2016 23:38:11 +0000 (00:38 +0100)]
kernel-module-imx-gpu-viv: add new package
This is the Vivante kernel driver split from the kernel source code in
order to make it possible to be used in any kernel source since 3.10.53.
The driver source code provided by Freescale needs fixes so the
community forked the code to allow faster development and easier
integration of fixes from the community.
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/32cf391
https://github.com/Freescale/meta-fsl-arm/commit/4249193
This package has been tested with the following commands:
# modprobe galcore
# cd /usr/share/examples/viv_samples/vdk/
# ./tutorial7
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yann E. MORIN [Wed, 20 Jan 2016 18:34:28 +0000 (19:34 +0100)]
package/linux-headers: add option to use same sources as the kernel
Some heavily (and most often improperly) modified Linux kernels may export
new APIs to userland, so as to speak to custom hardware or custom kernel
facilities.
However, we currently have no easy way to use such kernels as a source
for the linux-headers package, which precludes having those userland
headers intalled for userland applications to use them.
We do have a way for the kernel to use the same version as for the
headers, but that is definitely not enough, as the linux-headers package
has a version choice that is far less versatile and capable than that of
the linux package.
Add a new option for the linux-headers package, for the user to specify
that the version (really, the sources) of the kernel be used to install
the headers from.
We do that by making linux-headers patch-depend on the linux package.
We can't have linux-header simply depend on linux, because the simple
dependency means the the dependee will be configured, built and installed
before the dependent is configured. And since linux is a target package,
it depends on the toolchain, which internally dependes on linux-headers,
which would depend on linux, and we'd get a circular dependency.
Using patch-depend will ensure that linux is extracted and patched
before linux-headers is extracted, which is really all we need.
Then, we install the headers from the linux source tree, rather than
from linux-headers' source tree (as there's nothing in there!).
Since we need to install a private set for uClibc (see cde947f, uclibc:
prevent rebuilding after installation to staging), we explicitly set
INSTALL_HDR_PATH when calling the kernel' install-headers rule in
LINUX_HEADERS_CONFIGURE_CMDS, so that the headers are installed in
linux-headers' $(@D) instead of linux' $(@D).
Finally, as there is no way to know the kernel version in this case, we
must still prompt the user for the kernel series the headers are from
(like we do for a custom version) and check for consistency at build
time.
Note however that this still leaves users that want to built their
such-kernel outside of Buildroot out in the cold.
[Peter: drop comment as suggested by Thomas] Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Karoly Kasza <kaszak@gmail.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Peter Korsgaard <jacmet@uclibc.org> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Lada Trimasova [Wed, 27 Jan 2016 14:26:16 +0000 (17:26 +0300)]
util-linux: fix static builds with uClibc
In case of uClibc librt depends on libpthread. In particular
timer_create() function uses pthread_XXX(). That means in case
of static builds it's required to link not librt alone but
together with libpthread. So if checking timer_create function
in librt fails, it is necessary to check if timer_create function
successfully links with "-lpthread".
0005-build-sys-use-REALTIME_LIBS.patch is a back-port of upstream
https://github.com/karelzak/util-linux/commit/b97edfe731fdf3d3e92e40494b22658207ab6d3c
that won't apply cleanly on v2.27.1
0006-buildsys-fix-static-configuration-and-building.patch was just
applied upstream, see https://github.com/karelzak/util-linux/commit/71a77ca1ddfdd7e0d14caad9e8a607a83d61a45c
Both patches must be removed on util-linux version bump.
Signed-off-by: Lada Trimasova <ltrimas@synopsys.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The recent change to create the legacy gstconfig.h symlink using ln -srf
unfortunately breaks on older distributions as it was only added in
coreutils 8.16 (2012).
Instead, "manually" create the relative symlink.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Mon, 1 Feb 2016 22:42:35 +0000 (23:42 +0100)]
binutils: ensure TARGET_CONFIGURE_ARGS is taken into consideration for subdirs
Binutils runs the configure scripts of subdirs at make time, so we need a
custom build command to ensure TARGET_CONFIGURE_ARGS are taken into
consideration for those (E.G. for musl gettext handling).
Reported-by: Bernd Kuhls <bernd.kuhls@t-online.de> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bernd Kuhls [Sat, 30 Jan 2016 18:18:47 +0000 (19:18 +0100)]
package/gstreamer/gst-plugins-base: Fix build on x86 if emmintrin.h is available but can't be used
I stumbled across this error using a musl-based allyesconfig but I
doubt it is related to musl. The autobuilders did not catch this
problem yet but the patch I found fits my config (BR2_i386=y,
BR2_x86_i586=y) and it solved the problem right away.
[Peter: pick patches from upstream git instead of downloading from alphine] Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Yann E. MORIN [Thu, 28 Jan 2016 18:14:59 +0000 (19:14 +0100)]
core/legal-info: update the legal-info report header
In some cases, the toolchain sources are now recovered and available in
the legal-info output. So, adapt the header to use conditional instead
of an definitive negation.
Also update the part about saving the sources: it's not the license list
that defines whether sources are installed, but rather whether the
package is redistributable or not.
Gary Bisson [Mon, 1 Feb 2016 09:37:03 +0000 (10:37 +0100)]
configs/nitrogen6*: bump kernel version
Update to latest boundary-imx_3.14.28_1.0.0_ga commit which brings the
following additions:
- Fix cache functions export when !MULTI_CACHE
https://github.com/Freescale/linux-fslc/commit/6325d57
- Mandatory for Vivante kernel module
- Add TW686x video decoder support
- Fix OV5642 subdev/capture driver conflict
- Add GSLX680 touchscreen support
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gary Bisson [Mon, 1 Feb 2016 09:37:01 +0000 (10:37 +0100)]
xdriver_xf86-video-imx-viv: bump to version 5.0.11 p7.1
The license is now provided in the package.
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/1195b71
The following xorg.conf was used in order to force the use of the
vivante module:
https://github.com/Freescale/meta-fsl-arm/blob/master/recipes-graphics
/xorg-xserver/xserver-xf86-config/mx6/xorg.conf
Note that the X server must be started with the "noreset" option to
avoid crashes when closing X apps.
# X -noreset
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gary Bisson [Mon, 1 Feb 2016 09:37:00 +0000 (10:37 +0100)]
imx-gpu-viv: bump version to 5.0.11 p7.1
Upgrade to 5.0.11 P7.1 for i.MX6 with GPU
i.MX6QP qualified graphics driver(5.0.11P7.1).
Includes many of the bug fixes and stability improvements.
For more information refer to release notes from
http://www.freescale.com/imx6qp
libGAL_egl is no longer provided in p7.1.
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/b3ef125
This package has been tested with both X11 and Framebuffer backends:
# cd /usr/share/examples/viv_samples/vdk/
# apitrace trace --api egl ./tutorial7
# gmem_info
... display memory use per PID ...
# apitrace replay tutorial7.trace
# eglretrace tutorial7.trace
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gary Bisson [Sat, 30 Jan 2016 11:45:54 +0000 (12:45 +0100)]
libfslvpuwrap: bump to version 1.0.61
Changelog:
- Enable resolution change for H.263 and VP8
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/f11936b
This package has been implicitely tested through gstreamer as the
plugins rely on it for vpu decoding:
# gst-launch-0.10 playbin uri=file:///root/tears_of_steel_1080p.webm
# gst-launch-1.0 playbin uri=file:///root/tears_of_steel_1080p.webm
# gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \
matroskademux ! imxvpudec ! imxipuvideosink
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gary Bisson [Sat, 30 Jan 2016 11:45:53 +0000 (12:45 +0100)]
libfslparser: bump to version 4.0.7
Changelog:
- Add h264 parser version.
- Support wide and 'ms 0x0 0x11' adpcm tag.
- Support hev1 tag for hevc video codec.
- TS segment fault.
- Improve mkv parser's loading time when create parser with large size
file.
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/6406ad4
https://github.com/Freescale/meta-fsl-arm/commit/09a532c
https://github.com/Freescale/meta-fsl-arm/commit/371df94
This package has been implicitely tested through gstreamer as the 0.10
plugin relies on it:
# gst-launch-0.10 playbin uri=file:///root/tears_of_steel_1080p.webm
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gary Bisson [Sat, 30 Jan 2016 11:45:52 +0000 (12:45 +0100)]
libfslcodec: bump to version 4.0.7
Changelog since 4.0.3:
- Add mx7 SoC support.
- Add test binary to release package.
- Fix segmentation fault issue with only standard build.
- Build std only for arm11 and arm12.
- Fix some mp3_dec noise issue of c code for arm11 and arm9.
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/47b2677
https://github.com/Freescale/meta-fsl-arm/commit/c88fd22
https://github.com/Freescale/meta-fsl-arm/commit/3220a4c
This package has been implicitely tested through gstreamer as the 0.10
plugin relies on it:
# gst-launch-0.10 playbin uri=file:///root/tears_of_steel_1080p.webm
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gary Bisson [Sat, 30 Jan 2016 11:45:50 +0000 (12:45 +0100)]
imx-lib: bump to version 5.1
Change version to be independent of BSP version. This limits
confusion on future BSP updates that do not include imx-lib updates.
Changelog since 3.14.28-1.0.0_ga:
- Add i.MX 7D support.
- Change LICENSE file.
- Enable pxp libraries for i.MX 6UltraLite.
- Fix rng and shara2 to exclude the 6UL platform to avoid build breaks
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/b299454
https://github.com/Freescale/meta-fsl-arm/commit/5f28af0
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gary Bisson [Sat, 30 Jan 2016 11:45:49 +0000 (12:45 +0100)]
imx-kobs: bump to version 5.1
Use a different versioning schema based on package versioning
instead of BSP version. This way, if a new BSP version does
not bump this package, we can keep this package unchanged as well.
Changelog since 3.14.28-1.0.0_ga:
- Add fixes for maximum ecc strength for each platform.
- Add mx7 boot config support.
- Add i.MX 6UltraLite support.
- Join the ecc with real FCB data when not byte-aligned.
- Generalize the encode_bch_ecc function for different configurations.
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/8d47a2e
https://github.com/Freescale/meta-fsl-arm/commit/70edf16
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gary Bisson [Sat, 30 Jan 2016 11:45:48 +0000 (12:45 +0100)]
firmware-imx: bump to version 5.2
Use a different versioning schema based on package versioning
instead of BSP version. This way, if a new BSP version does
not bump this package, we can keep this package unchanged as well.
VPU firmware upgraded to v3.1.1_r46067
- Low Latency fixes for H.264 encoder
- Wrong frame number fix for H.264 decoder
- Decode failure fix for H.264 decoder with multi-SPS/PPS headers
The package adds the EPDC waveforms and the needed changes to properly
install those were done in the firmware-imx.mk file.
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/d869826
https://github.com/Freescale/meta-fsl-arm/commit/075a5b1
This package has been implicitely tested through gstreamer as the
plugins rely on them for vpu decoding for instance:
# gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \
matroskademux ! imxvpudec ! imxipuvideosink
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
[Thomas:
- fix typo in commit logs
- remove ; \ and ; at the end of commands, since they were not
needed.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Romain Naour [Mon, 1 Feb 2016 17:31:04 +0000 (18:31 +0100)]
toolchain-external: bump Linaro ARMEB to 2015.11-2
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas: only add the symlink with the old 2014.09 Linaro toolchain,
for the newer ones, it is no longer needed.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Romain Naour [Mon, 1 Feb 2016 17:31:03 +0000 (18:31 +0100)]
toolchain-external: bump Linaro ARM to 2015.11-2
Runtime tested with Qemu 2.3.1 using a configuration based on
qemu_arm_vexpress_defconfig with BR2_ARM_ENABLE_VFP and
BR2_ARM_EABIHF selected
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas: only add the symlink with the old 2014.09 Linaro toolchain,
for the newer ones, it is no longer needed. This has been runtime
tested in Qemu.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
New release contains a security fix for the resolver library parts.
It contains exp10(), so some patches in buildroot might be obsolete,
when the buildroot toolchains are rebuilt.
It also contains a fix for the symbol clashing with bind9.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Wed, 27 Jan 2016 21:25:30 +0000 (22:25 +0100)]
uclibc: remove version selection
Since we now only support uClibc-ng, remove the version selection from
the uclibc package.
Note that the BR2_UCLIBC_VERSION_SUPPORTS_* hidden booleans, which
were only used to allow each uClibc version to specify which thread
implementation they support and on which architecture are removed. Now
such architecture dependencies are directly encoded in the "Thread
library implementation" choice.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Wed, 27 Jan 2016 21:25:29 +0000 (22:25 +0100)]
uclibc: remove support for the snapshot version
The snapshot version points to the original uClibc project, which is
dead. Moreover, we no longer support "snapshot" versions for any other
Buildroot component, so there is no reason to keep it for uClibc.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Wed, 27 Jan 2016 21:25:28 +0000 (22:25 +0100)]
uclibc: remove 0.9.33 version
The upstream project is dead, the 0.9.33 version requires tons of
patches, and uclibc-ng has now successfully replaced uclibc. It is
time to get rid of the 0.9.33 version.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Wed, 27 Jan 2016 21:25:27 +0000 (22:25 +0100)]
samba4: remove dependency on specific C libraries
samba4 relies on the $ORIGIN feature of the dynamic linker, which used
to not be implemented in old uClibc versions. However:
- this feature is supported by glibc
- this feature is supported by uClibc-ng, which is the only uClibc
version we are going to support
- this feature is supported by musl
Consequently, we can completely remove the dependency of samba4 on
certain C libraries.
Note that despite this commit, samba4 still cannot be chosen when the
musl C library is used, because samba4 requires native RPC support,
which musl doesn't provide.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Wed, 27 Jan 2016 21:25:26 +0000 (22:25 +0100)]
vlc: remove dependency on C library
vlc uses <spawn.h> which was not available in old uClibc
versions. However, since we are removing support for uClibc 0.9.33, we
can get rid of such dependency. In addition, <spawn.h> is provided by
musl, and therefore VLC can be enabled with this C library.
Consequently, this commit completely removes any C library dependency for
the vlc package. The only special case that needs to be handled is the
Blackfin external toolchain from Analog Devices, which still uses an old
uClibc version that doesn't provide <spawn.h>, but as vlc uses fork() we add
a depends on BR2_USE_MMU (which covers the blackfin toolchain).
[Peter: add BR2_USE_MMU dependency] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Tested-by: Romain Naour <romain.naour@gmail.com> Reviewed-by: Romain Naour <romain.naour@gmail.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Wed, 27 Jan 2016 21:25:25 +0000 (22:25 +0100)]
mongrel2: allow using uClibc but only on certain architectures
mongrel2 uses the {get,make,swap}context functions:
- With glibc, no problem, they are available on all supported
architectures
- With uClibc, they are available only on a subset of the
architectures. Until now, only BR2_UCLIBC_VERSION_SNAPSHOT
configurations were allowed to select mongrel2, but we are going to
get rid of the uClibc snapshot version, and uClibc-ng is as capable
as the uClibc snapshot. However, only certain architectures have
the *context() functions.
- With musl, there is no *context() support.
Since this dependency is quite complicated, we introduce a
BR2_PACKAGE_MONGREL2_LIBC_SUPPORTS hidden boolean to encode which C
libraries are supported.
Also, listing the supported uClibc architectures would be too long in
the comment, so we simply indicate that the package needs uClibc or
glibc.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Wed, 27 Jan 2016 21:25:24 +0000 (22:25 +0100)]
lttng-babeltrace: make available for all C libraries
Due to posix_fallocate() being unavailable in uClibc 0.9.33,
lttng-babeltrace was marked as available only for uClibc snapshot and
glibc. However:
- lttng-babeltrace builds fine with musl
- lttng-babeltrace builds fine with uClibc-ng
- we're going to get rid of uClibc 0.9.33 support
- the only toolchain left with an old uClibc version is the Blackfin
Analog Devices toolchain, and lttng-babeltrace cannot be enabled on
non-MMU platforms
Conclusion: We can enable lttng-babeltrace on all C libraries, and no
longer require any condition. This commit adjusts the lttng-babeltrace
package accordingly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Tested-by: Romain Naour <romain.naour@gmail.com> Reviewed-by: Romain Naour <romain.naour@gmail.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Wed, 27 Jan 2016 21:25:23 +0000 (22:25 +0100)]
libunwind: fix C library dependency
The libunwind package currently dependency on glibc *or* uclibc
snapshot. However, we are going to remove the support for uclibc
snapshot, and uClibc-ng has equivalent functionality as uclibc
snapshot. Moreover, musl is also capable of building libunwind for
certain architectures.
Therefore, this commit reworks the architecture dependencies of
libunwind, to make it available on all architectures for which it is
supported, depending on the capabilities of the different C libraries,
and the implementation of libunwind on each architecture.
On some architectures, libunwind uses the C library *context()
functions, which are not provided by musl at all, and not provided by
uClibc on all architectures. But on some other architectures,
libunwind does not use the C library *context() functions, which
explains why it can be built with musl on such architectures.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Romain Naour [Mon, 1 Feb 2016 17:31:02 +0000 (18:31 +0100)]
toolchain-external: bump Linaro AArch64 to 2015.11-2
Runtime tested with Qemu 2.3.1 using qemu_aarch64_virt_defconfig.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas: only add the symlink with the old 2014.09 Linaro toolchain,
for the newer ones, it is no longer needed. This has been runtime
tested in Qemu.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
website: add reference to submitting-patches to Contribute tab
In the hope of improving the quality of patches send by newcomers,
add a reference to the submitting-patches section of the manual
to the Contribute tab of the website.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In the hope of improving the quality of patches sent by newcomers,
add a reference to the submitting-patches section of the manual
to the top-level README file.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Peter Korsgaard [Mon, 1 Feb 2016 16:02:06 +0000 (17:02 +0100)]
package/Makefile.in: correct gettext handling for musl
Based on a patch by Bernd Kuhls.
The AM_GNU_GETTEXT autotools macro misdetects musl gettext support as it
checks for internal glibc symbols. Work around it by forcing libc gettext
support when musl is used for the supported gettext api levels.
As this is a generic issue for any package using AM_GNU_GETTEXT, add it to
the global TARGET_CONFIGURE_ARGS instead of for each affected package.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: notice patch is now upstream:
https://github.com/rpodgorny/unionfs-fuse/commit/f64b094eba93b042a1ed5964] Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
manual: minor fixes in the graph-size documentation
Fix some typos and references to a size-stats 'target' (the script is called
'size-stats' but the make target is 'graph-size').
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bernd Kuhls [Sun, 31 Jan 2016 17:39:43 +0000 (18:39 +0100)]
package/squashfs: fix musl build
The build errors were not yet found by the autobuilders:
action.c: In function ‘name_fn’:
action.c:1911:29: error: ‘FNM_EXTMATCH’ undeclared (first use in this function)
FNM_PATHNAME|FNM_PERIOD|FNM_EXTMATCH) == 0;)
^
pseudo.c: In function ‘read_pseudo_def’:
pseudo.c:435:11: error: ‘S_IFBLK’ undeclared (first use in this function)
mode |= S_IFBLK;
^
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, following symbolic links are created in both target and
staging directories:
- lib(32|64) --> lib
- usr/lib(32|64) --> lib
The decision for lib32 or lib64 is based on the target architecture
configuration in buildroot (BR2_ARCH_IS_64).
In at least one case this is not correct: when building for a Cavium Octeon
III processor using the toolchain from the Cavium Networks SDK, and
specifying -march=octeon3 in BR2_TARGET_OPTIMIZATION, libraries are expected
in directory 'lib32-fp' rather than 'lib32' (ABI=n32; likewise for
lib64-fp in case of ABI=n64)
More generally the correct symbolic link is from (usr/)${ARCH_LIB_DIR}->lib.
However, feedback from Arnout Vandecappelle is that there are packages that
do depend on the lib32/lib64 symlink, even if ARCH_LIB_DIR is different.
Hence, these links must be kept.
Fix the problem as follows:
- For internal toolchains: no change
- For external toolchains: create a symlink ARCH_LIB_DIR->lib if
(usr/)ARCH_LIB_DIR does not exist yet.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Arnout Vandecappelle <arnout@mind.be> Cc: "Yann E. Morin" <yann.morin.1998@free.fr> Cc: Romain Naour <romain.naour@gmail.com> Cc: Peter Korsgaard <peter@korsgaard.com> Reviewed-by: Romain Naour <romain.naour@gmail.com> Tested-by: Romain Naour <romain.naour@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
toolchain-external: improve sysroot rsync if ARCH_LIB_DIR != lib/lib32/lib64
The copy_toolchain_sysroot helper in toolchain/helpers.mk performs an
rsync of various directories from the extracted external toolchain to the
corresponding directory in staging.
The relevant (simplified) snippet is:
for i in etc $${ARCH_LIB_DIR} sbin usr usr/$${ARCH_LIB_DIR}; do \
rsync -au --chmod=u=rwX,go=rX --exclude 'usr/lib/locale' \
--exclude '/lib/' --exclude '/lib32/' \
--exclude '/lib64/' \
$${ARCH_SYSROOT_DIR}/$$i/ $(STAGING_DIR)/$$i/ ; \
done ; \
The exclusion logic of lib/lib32/lib64 has originally been added by commit 5628776c4a4d29d0715633ea463b64cc19e19c5a with the purpose of only copying
the relevant usr/lib* directory from the toolchain to staging, instead of
all. For example, if ARCH_LIB_DIR is 'lib64', then only usr/lib64 would be
copied and usr/lib and usr/lib32 are ignored. It works by ignoring any
lib/lib32/lib64 subdirectory on the rsync of 'usr' and then separately
copying usr/{lib,lib32,lib64} as appropriate. (The exclusion rules only have
impact on the files beneath the main source directory.)
However, ARCH_LIB_DIR can take other values than (lib, lib32, lib64), for
example lib32-fp or lib64-fp (Octeon III toolchain with -march=octeon3). In
the existing code, the rsync for 'usr' would then already copy these lib
directories, and the next rsync for 'usr/$${ARCH_LIB_DIR}' does nothing.
By itself, this is not a very big problem: the staging directory simply has
some extra directories. However, a subsequent patch will create a staging
symlink from $${ARCH_LIB_DIR} to lib. The first rsync would then overwrite
that symlink with the real directory usr/$${ARCH_LIB_DIR} from the
toolchain, which is not correct.
Assuming the patch that creates the symlink ARCH_LIB_DIR->lib is applied,
the original situation after 'make clean toolchain' with an
ARCH_LIB_DIR=lib32-fp is:
$ ls -ld output/staging/{,usr/}lib* output/target/{usr/,}lib*
drwxr-xr-x 2 4096 May 26 2015 output/staging/lib
lrwxrwxrwx 1 3 Jan 20 13:47 output/staging/lib32 -> lib
lrwxrwxrwx 1 3 Jan 20 13:47 output/staging/lib32-fp -> lib
drwxr-xr-x 2 4096 Jan 20 13:47 output/staging/usr/lib
lrwxrwxrwx 1 3 Jan 20 13:47 output/staging/usr/lib32 -> lib
drwxr-xr-x 4 4096 May 26 2015 output/staging/usr/lib32-fp
drwxr-xr-x 4 4096 May 26 2015 output/staging/usr/lib64-fp
drwxr-xr-x 4 4096 May 26 2015 output/staging/usr/libexec
drwxr-xr-x 3 4096 May 26 2015 output/staging/usr/libexec32
drwxr-xr-x 3 4096 May 26 2015 output/staging/usr/libexec32-fp
drwxr-xr-x 3 4096 May 26 2015 output/staging/usr/libexec64-fp
drwxr-xr-x 2 4096 Jan 20 13:48 output/target/lib
lrwxrwxrwx 1 3 Jan 20 13:47 output/target/lib32 -> lib
lrwxrwxrwx 1 3 Jan 20 13:47 output/target/lib32-fp -> lib
drwxr-xr-x 2 4096 Jan 20 13:48 output/target/usr/lib
lrwxrwxrwx 1 3 Jan 20 13:47 output/target/usr/lib32 -> lib
lrwxrwxrwx 1 3 Jan 20 13:47 output/target/usr/lib32-fp -> lib
Notice how usr/lib32-fp is not a symlink but a directory, and the presence
of an unnecessary directory usr/lib64-fp.
This patch improves the rsync exclusion rules by excluding any lib*
directory on the first rsync. As this would also exclude any
libexec/libexec32/... directory, explicitly include them first (first match
takes precedence). This (as is already the case today) results in more
usr/libexec* directories than needed, but it is not touched by this patch.
With the fix applied, the situation becomes:
drwxr-xr-x 2 4096 May 26 2015 output/staging/lib
lrwxrwxrwx 1 3 Jan 20 14:27 output/staging/lib32 -> lib
lrwxrwxrwx 1 3 Jan 20 14:27 output/staging/lib32-fp -> lib
drwxr-xr-x 4 4096 May 26 2015 output/staging/usr/lib
lrwxrwxrwx 1 3 Jan 20 14:27 output/staging/usr/lib32 -> lib
lrwxrwxrwx 1 3 Jan 20 14:27 output/staging/usr/lib32-fp -> lib
drwxr-xr-x 4 4096 May 26 2015 output/staging/usr/libexec
drwxr-xr-x 3 4096 May 26 2015 output/staging/usr/libexec32
drwxr-xr-x 3 4096 May 26 2015 output/staging/usr/libexec32-fp
drwxr-xr-x 3 4096 May 26 2015 output/staging/usr/libexec64-fp
drwxr-xr-x 2 4096 Jan 20 14:27 output/target/lib
lrwxrwxrwx 1 3 Jan 20 14:27 output/target/lib32 -> lib
lrwxrwxrwx 1 3 Jan 20 14:27 output/target/lib32-fp -> lib
drwxr-xr-x 2 4096 Jan 20 14:27 output/target/usr/lib
lrwxrwxrwx 1 3 Jan 20 14:27 output/target/usr/lib32 -> lib
lrwxrwxrwx 1 3 Jan 20 14:27 output/target/usr/lib32-fp -> lib
For cases where ARCH_LIB_DIR is one of lib, lib32 or lib64 this fix
makes no difference, and likewise for internal toolchains.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com> Cc: Samuel Martin <s.martin49@gmail.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Arnout Vandecappelle <arnout@mind.be> Reviewed-by: Romain Naour <romain.naour@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
toolchain-external: don't exclude too much lib in sysroot rsync
The copy_toolchain_sysroot helper in toolchain/helpers.mk performs an
rsync of various directories from the extracted external toolchain to the
corresponding directory in staging.
The relevant (simplified) snippet is:
for i in etc $${ARCH_LIB_DIR} sbin usr usr/$${ARCH_LIB_DIR}; do \
rsync -au --chmod=u=rwX,go=rX --exclude 'usr/lib/locale' \
--exclude lib --exclude lib32 --exclude lib64 \
$${ARCH_SYSROOT_DIR}/$$i/ $(STAGING_DIR)/$$i/ ; \
done ; \
The exclusion logic of lib/lib32/lib64 has been added by commit 5628776c4a4d29d0715633ea463b64cc19e19c5a with the purpose of only copying
the relevant usr/lib* directory from the toolchain to staging, instead of
all. For example, if ARCH_LIB_DIR is 'lib64', then only usr/lib64 would be
copied and usr/lib and usr/lib32 are ignored. It works by ignoring any
lib/lib32/lib64 subdirectory on the rsync of 'usr' and then separately
copying usr/{lib,lib32,lib64} as appropriate. (The exclusion rules only have
impact on the files beneath the main source directory.)
However, on the rsync of 'usr', ANY of the following directories AND files
would be excluded:
lib/
lib
lib32/
foobar/something/lib/
something-else/lib64/
while it is only the intention to skip directories directly under usr.
Therefore, add a leading (to restrict the scope to first-level) and trailing
(to restrict to directories) slash to the exclude pattern. From 'man rsync':
- if the pattern starts with a / then it is anchored to [..] the root of
the transfer.
- if the pattern ends with a / then it will only match a directory, not
a regular file, symlink, or device.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com> Cc: Samuel Martin <s.martin49@gmail.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Arnout Vandecappelle <arnout@mind.be> Reviewed-by: Romain Naour <romain.naour@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yann E. MORIN [Thu, 21 Jan 2016 21:23:38 +0000 (22:23 +0100)]
docs/manual: makedev syntax accepts usernames and group names
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Yann E. MORIN [Thu, 21 Jan 2016 21:23:37 +0000 (22:23 +0100)]
package/makedevs: use the rooted /etc/passwd and /etc/group
Currently, makedevs will query the host's /etc/passwd and /etc/group to
resolve usernames and group names. This is inherently flawed, as we can
never guarantee that the UIDs will be the same on the target as on the
host, or even whether a particular user does exist on the host.
This is because getpwnam() and getgrnam() will forcibly read the
system's /etc/passwd and /etc/group, and there is no way to tell them to
look anywhere else.
However, we can use fgetpwent() and fgetgrent() instead, for which
we can pass a FILE* stream to read from to get the entries. This means
we must implement the scanning-loop ourselves, but fortunately, that's
pretty trivial to do.
[Peter: swap errno / return value check, use bb_perror_msg_and_die, code style] Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Yann E. MORIN [Thu, 21 Jan 2016 21:23:36 +0000 (22:23 +0100)]
fs/common: generate users before setting permissions
We will need the users and groups to get defined before we can use them
from makedevs.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
projects / coffee / buildroot.git / log