In commit 2a27294e9ade6130a12ced9a1f152c51431a870e ("grub2: force
-fno-stack-protector in CFLAGS"), a fix was made to the grub2 package
to make it build properly even when SSP support is enabled.
Check:
- the daemon is started;
- a message is collected;
- the daemon does not issue a warning message on startup.
When the .conf file version does not match the package version a warning
message shows up on serial on every boot. This message is generated by
syslog-ng before it is running, so it is not logged to
/var/log/messages. So in order to test the message is generated, restart
the server. It makes the message appears on /var/log/messages (since the
server is already running) where its existence can be easily tested
using grep.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@datacom.ind.br> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
syslog-ng: bump version header in conf file to 3.10
Remove a runtime warning message about configuration file being too old.
Do the same as commit 3dad25466d "syslog-ng: Bump version header in conf
file to 3.9". Package version of syslog-ng is 3.10.1, so bump version
number in syslog-ng.conf to 3.10.
Also add a comment to avoid the same warning message reappears when the
package is bumped.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@datacom.ind.br> Cc: Chris Packham <judge.packham@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The different versions of git will behave in different ways when
fetching remote references, as summarised by the table below:
| ancient git | new git
--------------------------------------------------------------------
git fetch | fetch all refs but tags | fetches all refs but tags
git fetch -t | fetches only tags | fetch all refs and tags
(git-fetch may still fetch tags, but only if reachable from a branch)
So, to cover all the bases, we do a simple fetch, to be sure we have
branches, followed by the existing fetch -t, to get extra tags.
Calin Crisan [Sun, 25 Mar 2018 10:18:55 +0000 (13:18 +0300)]
toolchain-external-custom: allow specifying relative path to binaries
There are cases where a downloaded toolchain doesn't have its binaries
placed directly in a "bin" subfolder (where BuildRoot currently looks
for them).
A common example is the official Raspberry Pi Toolchain
(https://github.com/raspberrypi/tools), which has its binaries in
"arm-bcm2708/arm-linux-gnueabihf/bin".
This commit introduces BR2_TOOLCHAIN_EXTERNAL_REL_BIN_PATH that defaults
to "bin" and can be changed as needed.
Signed-off-by: Calin Crisan <ccrisan@gmail.com> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: rework a bit how TOOLCHAIN_EXTERNAL_REL_BIN_PATH is defined.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Set LDLIBS to TARGET_LDFLAGS for TARGET_LDFLAGS to be added to the link
commands. Makefile does not use the LDFLAGS environment variable. This
fixes static linking.
Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
There are cases where a repository might be broken, e.g. when a previous
operation was killed or otherwise failed unexpectedly.
We fix that by always initialising the repository, as suggested by
Ricardo. git-init is safe on an otherwise-healthy repository:
Running git init in an existing repository is safe. It will not
overwrite things that are already there. [...]
Using git-init will just ensure that we have the strictly required files
to form a sane tree. Any blob that is still missing would get fetched
later on.
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Reported-by: Ricardo Martincoski <ricardo.martincoski@gmail.com> Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com> Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com> Cc: Arnout Vandecappelle <arnout@mind.be> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Acked-by: Ricardo Martincoski <ricardo.martincoski@gmail.com> Tested-by: Ricardo Martincoski <ricardo.martincoski@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
download/git: ensure we always work in the expected repository
git always look directories up until it finds a repository. In case
the git cache is broken, it may no longer be identified as a repository,
and git will look higher in the directories until it finds one.
In the default conditions, this would be Buildroot's own git tree
(because DL_DIR is a subdir of Buildroot), but in some situations may
very well be any repository the user has Buildroot in, like a
br2-external tree...
So, we force git to use our git cache and never look elsewhere, as
Suggested by Ricardo.
Use GIT_DIR, as it has been there for ages now, while --git-dir was
only introduced later (even if most distros ship an later version),
as suggested by Arnout.
Also fix the one call to git that was not using the wrapper.
Reported-by: Ricardo Martincoski <ricardo.martincoski@gmail.com> Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com> Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com> Cc: Arnout Vandecappelle <arnout@mind.be> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Acked-by: Ricardo Martincoski <ricardo.martincoski@gmail.com> Tested-by: Ricardo Martincoski <ricardo.martincoski@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
package/wmctrl: x-includes and x-libraries must be set for cross-compiling
set x-includes and x-libraries configure option for cross-compiling.
wmctrl can use poisoned paths if these options are not passed to
configure script.
usb_modeswitch: set CXX to false when C++ is missing
Similar to the openocd fix in commit 5966e2dc54 (package/openocd: fix
fallout after no-C++ fixups) the jimctl that is bundled with
usb_modeswitch also wants to find a binary. This broke with commit 4cd1ab158 (core: alternate solution to disable C++). Revert to 'false'
instead of 'no' here as well.
qt53d: install missing QML modules, plugins and examples
Some files were missing on the first build of qt53d but added later:
- by qt5base for the plugins because it copies the whole /usr/lib/qt/plugins
directory
- by qt5declarative for the QML modules because it copies the whole
/usr/qml directory
Also, the qt53d examples were not installed if
BR2_PACKAGE_QT5BASE_EXAMPLES was set.
Signed-off-by: Romain Reignier <rom.reignier@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Thomas Petazzoni [Sun, 15 Apr 2018 20:22:45 +0000 (22:22 +0200)]
linux-firmware: support paths with subdirs in LINUX_FIRMWARE_DIRS
Following commit cdb7876f63a253254b86637aaac8b255a426b60a
("linux-firmware: add Qualcomm video accelerator and GPU firmware
options"), LINUX_FIRMWARE_DIRS can now contain entries with subdirs,
such as "qcom/venus-1.8". Such entries are currently not supported by
the logic in LINUX_FIRMWARE_INSTALL_DIRS.
Indeed the current logic consists in:
- Removing the destination directory
- Copying to the destination directory
Unfortunately, the last step fails if a component of the path leading
to the destination directory does not exist. To overcome this, we
simply add the appropriate mkdir before the copy.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Carlos Santos [Mon, 16 Apr 2018 02:29:40 +0000 (23:29 -0300)]
tpm2-abrmd: don't test if the binary exists in the init script
The test doesn't make sense. Buildroot installs both abrmd and its init
script as part of the same package. But if it ever happens for some
reason, the error message from start-stop-daemon should be pretty clear.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Carlos Santos [Mon, 16 Apr 2018 02:29:24 +0000 (23:29 -0300)]
eudev: don't test if the binary exists in the init script
The test doesn't make sense. It just exits with error code 5 if the
binary doesn't exist, which is silly. Buildroot installs both udevd and
its init script as part of the same package. But if it ever happens for
some reason, the error message "/sbin/udevd: No such file or directory"
in the start case should be pretty clear.
Replace the UDEV_BIN variable, which was used only once, by the full
path of the binary file.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The Blackfin architecture has for a long time been complicated to
maintain, with poor support in upstream binutils/gcc. As of April
2018, the Blackfin architecture has been dropped from the upstream
Linux kernel. Also, the Analog Device engineer who used to be in touch
with the Buildroot community also privately said we should drop the
support for this architecture, which Analog Devices is no longer
using, promoting and maintaining.
The BR2_BINFMT_FLAT_SEP_DATA option becomes unselectable, it will be
removed in a future commit.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In preparation for the removal of the Blackfin architecture, drop the
autobuilder toolchain configuration that was testing Blackfin.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Carlos Santos [Fri, 13 Apr 2018 16:00:27 +0000 (13:00 -0300)]
network-manager: support a defaults file in the init script
Sometimes it is useful to pass some parameters to NetworkManager when it
starts (e.g. --log-level) instead of editting NetworkManager.conf. Allow
the user add a file with a NETWORKMANAGER_ARGS variable containing such
flags. This is simpler than overriding the whole startup script (e.g. by
means of a rootfs overlay).
Signed-off-by: Carlos Santos <casantos@datacom.ind.br> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Regenerate patches using git as patch 0002 didn't applu and the others
were fuzzy.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
[Thomas: fix authorship in patches, order of SoB and use git
format-patch -N to avoid numbering] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
zeromq: patch configure.ac to check for ldaddr on when checking libunwind
configure.ac can fail the build when there's no dynamic library support,
since it cannot find dladdr which is needed only when we have libunwind.
Therefore, configure.ac was patched to check for dladdr only in the libunwind
check section. As a consequence of the patch, ZEROMQ_AUTORECONF was set.
Signed-off-by: Peter Seiderer <ps.report@gmx.net> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
projects / coffee / buildroot.git / log