Danomi Manchego [Sat, 8 Jun 2013 01:43:42 +0000 (21:43 -0400)]
Makefile: change rsync used in overlays to always transfer files
If two files with the same relative paths exist in multiple overlay
skeletons, and they have the same modification time and size, then rsync
might not copy the later file on top of the earlier file. This patch fixes
this by adding the -I option to the rsync commands used in the overlay
skeleton file installations. ("man rsync" indicates that this option turns
off the file-size/mod-date "quick check" behavior, causing all files to be
updated - more like the cp commands that we had originally.)
[Peter: use --ignore-times to make it obvious what the option does] Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
iucode_tool is a program to manipulate Intel® X86 and X86-64 processor
microcode collections, and to use the kernel facilities to upgrade the
microcode on Intel system processors.
It was originally sent by Richard Braun <rbraun@sceen.net>
[Peter: drop 'sid' from upstream URL] Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com> Cc: Richard Braun <rbraun@sceen.net> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Sonic Zhang [Tue, 4 Feb 2014 13:06:46 +0000 (14:06 +0100)]
icu: detect and add compiler symbol prefix to the assembly code
Some compilers, such as the Blackfin GNU compiler, prefix a character to any
C symbol in generated assembly code. If any assembly symbol is invoked
from C code, it needs to be prefixed as well.
Note: since autoreconf doesn't work with this package because automake
isn't used.
[Ryan: add information about why patching configure is ok]
[Ryan: add renaming of patches to be consistent with standard]
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
pkg-download: make sure git downloads fail for unknown versions
The current git download helper creates the tarball by doing:
git archive <version> | gzip -c > <tarball>
Unfortunately, even if "git archive" fails and returns a non-zero
error code, gzip ignores that, compresses nothing, and returns success
(zero error code). The consequence of this behavior is that when the
git version provided in the package is incorrect, we are not failing
during the download step, but later on when trying to extract the
tarball (which was incorrectly created as a result of the failing git
archive).
To fix this, we change the tarball creation logic to:
If the build is interrupted during the "gzip" command, we may leave
the .tmp file behind us, but this also happens with wget downloads,
and is generally not considered a problem, since this temporary file
will be overwritten next time we attempt to do download this package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
arch: remove incorrect condition for endian definition on SuperH
Probably due to some copy/paste mistake, Config.in.sh was defining
BR2_ENDIAN to "LITTLE" when the architecture is BR2_x86_64. Due to the
fact that Config.in.sh is never included when we are building for
x86_64, this is a no-op, but is certainly good to clean up.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The uclibc version condition is accurate but doesn't cover external
toolchains, so also exclude for avr32 too which only has 0.9.31 enabled.
Fixes:
http://autobuild.buildroot.net/results/4ee/4eec6e29d0f2a46bbbe3a748e85bd06c3601b7c1/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Tue, 4 Feb 2014 13:41:30 +0000 (14:41 +0100)]
udpcast: drop stat64 handling
udpcast was checking the (non-existing) BR_LARGEFILE variable to know if it
should enable stat64 or not, but the package itself depends on largefile
support and more importantly, configure doesn't look at this variable at
all, so we can just drop it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The intel microcode is a proprietary package which provides a data file
used to correct processors errors.
It was originally sent by Richard Braun <rbraun@sceen.net>
[Peter: set _LICENSE_FILES] Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com> Cc: Richard Braun <rbraun@sceen.net> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bernd Kuhls [Mon, 30 Dec 2013 17:57:52 +0000 (18:57 +0100)]
gnupg: depend on libiconv if appropriate
If iconv is built before gnupg, this package will link against it; if it is
built after this package, it will not be linked against it. To make the
build reproducible, make sure that iconv is always built before this
package.
Ryan Barnett [Tue, 4 Feb 2014 09:38:57 +0000 (10:38 +0100)]
gpm: run autogen.sh as PRE_CONFIGURE step
Move the GPM_RUN_AUTOGEN to be a PRE_CONFIGURE step because this step
depends on the dependancies being built. If it is a POST_PATCH step
the dependencies won't be built and the GPM_RUN_AUTOGEN step will fail
(if the host doesn't have autotools).
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
scripts: xorg-release: handle case when version needs downgrade
the initial implementation assumes that when a version found in
buildroot is different from the one in the X11 release, it
requires an upgrade. even though this is most likely the case, it
could be a downgrade too, and it's probably worth highlighting
such cases when it (rarely) happens.
LooseVersion from distutils is doing the low level job of sorting
version numbers represented in strings...
[Thomas & Thomas:
- do not count packages more recent in Buildroot than in the latest
X.org release as to be downgraded. If we have more recent version,
it's generally for a good reason, so we want to keep them as
is. Such packages are counted as "nothing to do", but for
information, we indicate that there are "More recent"
- also remove the "nothing to do" action indicator. It used to be a
simple dash, which was not really useful.
]
Signed-off-by: Nicolas Dechesne <ndec13@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gpm: fixes build error when makeinfo is not installed on host
Tested with: make gpm MAKEINFO=no
Should fix http://autobuild.buildroot.net/results/fbf/fbf42eac7cf09b2f3fc93fa2134ddefcb1beea2f/build-end.log
Thanks to Romain Naour for pointing out the problem.
Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some toolchains include asm-generic/int-l64.h from their asm/types.h
file for certain 64-bit architectures. This causes a conflict between
types like this one:
asm-generic/int-l64.h:28:25: error: conflicting types for '__s64'
typedef __signed__ long __s64;
^
In file included from mmc.h:17:0,
from mmc_cmds.c:30:
asm-generic/int-ll64.h:29:44: note: previous declaration of '__s64' was
here
__extension__ typedef __signed__ long long __s64;
This patch has been submitted upstream.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Ryan Barnett [Mon, 3 Feb 2014 21:22:53 +0000 (22:22 +0100)]
Fix alioth.debian URLs that are broken
Inspired by a patch from Martin Bark <martin@barkynet.com>, this fixes
autobuild issues related to packages not downloading from alioth.debian
URLs. This patches is meant to be "temporary" until the URLs are fixed
by debian.
Try to clarify how the wrapper passes arguments and why.
This is mainly because the output you can see when you build, does not
reflect what is invoked by the wrapper.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Ezequiel García [Tue, 28 Jan 2014 11:39:21 +0000 (08:39 -0300)]
mtd: Allow to select the host variant
If any of the post-image scripts wants to create mtd/ubi images,
we need to expose an option for mtd-tools to be user-selectable.
[Peter: fix include order] Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Ezequiel García [Tue, 28 Jan 2014 11:39:20 +0000 (08:39 -0300)]
mtd: Add a more verbose menu text
mtd-utils also contain ubi/ubifs tools, so let's add it to the menu option.
Also, add an URL to stick to the help message standard.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Julien Boibessot [Wed, 29 Jan 2014 18:20:59 +0000 (19:20 +0100)]
Add gpm (general purpose mouse) server package
[Peter: small white space fixes as pointed out by Yann] Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Romain Naour <romain.naour@openwide.fr> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Alan Ott [Sun, 2 Feb 2014 00:42:49 +0000 (19:42 -0500)]
package/joe: Add package for the JOE editor
JOE is an easy-to-use, full-screen, terminal-based text editor.
http://joe-editor.sf.net
[Peter: add uClibc patch, add to package/Config.in, optional ncurses support] Signed-off-by: Alan Ott <alan@signal11.us> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Martin Bark [Sat, 1 Feb 2014 21:03:01 +0000 (21:03 +0000)]
zxing: don't select libiconv
The zxing package currently selects libiconv when locale support is not
available in the toolchain. This patch stops the zxing package selecting
libiconv. The zxing package now uses uses libiconv if it's available
otherwise iconv support is disabled in zxing.
Signed-off-by: Martin Bark <martin@barkynet.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Yann E. MORIN [Thu, 30 Jan 2014 21:07:18 +0000 (22:07 +0100)]
package/wayland: build a host variant
Starting with 1.4.0, weston requires wayland-scanner to build its DT.
So far, we got away with just hand-building wayland-scanner, and made
that available in HOST_DIR/usr/bin
But now, weston also requires wayland's DTD, which we did not take care of
in our dirty little hack.
So, the best solution is to just build a host-variant of wayland, so
we get both wayland-scanner, and the DTD.
But then, we do not build the target wayland-scanner (he, wayland tries
to run it at build time...). So it is a matter of just tweaking a little
bit the host .pc file (which weston uses to find wayland-scanner, sigh...)
and fake it as a target .pc file.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Arnout Vandecappelle <arnout@mind.be> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Romain Naour [Thu, 30 Jan 2014 22:14:58 +0000 (23:14 +0100)]
infozip: fix $(AS) behavior
infozip's Makefile expect $(AS) to output by default to <basename>.o
but when called from Buildroot, the value for $(AS) is set
to to invoke the toolchain's $(AS) directly, and the output of it
goes to a.out.
Tristan Lelong [Sat, 1 Feb 2014 23:07:43 +0000 (15:07 -0800)]
libroxml: bump version to 2.3.0
Starting with version 2.3.0, libroxml is now using autotools.
With autotools, the -Werror flag was dropped
-> no need for the patch libroxml-0001-werror.patch
With autotools, the availability of -Wno-*-unused is auto detected
-> no need for the patch libroxml-0002-wno-unused-result.patch
Signed-off-by: Tristan Lelong <tristan.lelong@blunderer.org> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gnutls-01-gettime.patch was applied upstream, AUTORECONF is no longer
necessary.
The GNUTLS_LIBREGEX_CHECK_FIX didn't actually work before, because it was
overwritten by the autoreconf. It looks like things still work without
regex. However, this patch reinstates the regex support by setting
libopts_cv_with_libregex=yes in the environment.
Fixes http://autobuild.buildroot.net/results/b22/b22f2caa79f371c625939b65a88a2073382c5288
(failure in libvncserver) because gnutls.so is now properly linked with -lrt.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Sven Neumann [Thu, 16 Jan 2014 13:57:52 +0000 (14:57 +0100)]
gst1-libav: new package
[Peter: file header, structure like gst-ffmpeg, drop unneeded libav args] Signed-off-by: Sven Neumann <neumann@teufel.de> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Thu, 30 Jan 2014 19:05:30 +0000 (20:05 +0100)]
web: announce meeting, and add Mind as sponsor
[Peter: s/Hangout/Hangouts/, line wrap] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Yann E. MORIN [Fri, 24 Jan 2014 19:56:21 +0000 (20:56 +0100)]
package/rpi-userland: fix fall-out after cmake infra change
Cset 9fa7f2b (pkg-cmake.mk: build shared library when !BR2_PREFER_STATIC_LIB)
broke rpi-userland.
Force not building shared libs for rpi-userland, since they are broken.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Samuel Martin <s.martin49@gmail.com> Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Tue, 28 Jan 2014 22:24:11 +0000 (19:24 -0300)]
libusb: disable udev support for host variant
There's no guarantee that udev with development files is present in the
host, so disable it. Fixes:
http://autobuild.buildroot.net/results/7bb/7bbf6ec25250dea96503253ac468adfef77a9010/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Julien Boibessot [Thu, 23 Jan 2014 15:38:04 +0000 (16:38 +0100)]
Add SMS Tools Server 3 package
[Peter: move to hw menu, int type for nr modems, drop _BINARIES_DIR
variable, fix config file name] Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Yann E. MORIN [Tue, 28 Jan 2014 20:11:25 +0000 (21:11 +0100)]
fs: ensure $(TARGET_DIR_WARNING_FILE) is writable
If the Buildroot tree is read-only, then $(TARGET_DIR_WARNING_FILE) is
copied read-only into target/ but we may want to remove it during the
build process.
This poses no real problem, since target/ itself is guaranteed to be
writable, but for good measure, force $(TARGET_DIR_WARNING_FILE) to be
writable itself.
Reported-by: Danomi Manchego <danomimanchego123@gmail.com> Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Yann E. MORIN [Tue, 28 Jan 2014 20:11:24 +0000 (21:11 +0100)]
package/uClibc: ensure .config is writable
If $(UCLIBC_CONFIG_FILE) is read-only (eg. because Buildroot's
source dir is), the sed fixups to .config fail.
Signed-off-by: Nathan Lynch <ntl@pobox.com>
[yann.morin.1998@free.fr: use $(INSTALL) instead of cp] Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Yann E. MORIN [Tue, 28 Jan 2014 20:11:23 +0000 (21:11 +0100)]
linux: ensure buildroot_defconfig is writable
If $(KERNEL_SOURCE_CONFIG) is read-only (eg. because Buildroot's source
dir is), the rm of $(KERNEL_ARCH_PATH)/configs/buildroot_defconfig will
either fail, or prompt the user, both of which we want to avoid.
Make it writable by using $(INSTALL).
Fixes: #4363 Signed-off-by: Nathan Lynch <ntl@pobox.com>
[yann.morin.1998@free.fr: use $(INSTALL) instead of cp, don't 'rm -f'] Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Nathan Lynch [Tue, 28 Jan 2014 20:11:21 +0000 (21:11 +0100)]
target: ensure target/ dir is writable
If the source target skeleton is read-only (eg. because Buildroot's
source dir is), modifications to the output target (such as creating
/etc/hostname and /etc/issue) fail.
(This can happen if the Buildroot source dir is NFS-mounted read-only
to be shared between different machines, for example).
Signed-off-by: Nathan Lynch <ntl@pobox.com>
[yann.morin.1998@free.fr: we use rsync now, not cp; --chmod=Du+w
suggested by Arnout; clarify commit log] Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Arnout Vandecappelle <arnout@mind.be> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libass is a portable subtitle renderer for the
ASS/SSA (Advanced Substation Alpha/Substation Alpha) subtitle format.
This package was originally found at : https://github.com/huceke/buildroot-rbp
By gimli <ebsi4711@gmail.com>
[Peter: make fontconfig/enca optional, fix license, add host-pkgconf,
optionaliconv/harfbuzz support] Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com> Cc: gimli <ebsi4711@gmail.com> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Frank Hunleth [Tue, 28 Jan 2014 00:42:55 +0000 (19:42 -0500)]
erlang: bump version to R16B03-1
OTP R16B03-1 is a service release which corrects a few issues found in
the R16B03 release. The corrections are:
- The ODBC application was missing in the prebuilt Windows installers
- 3 corrections in the SSL application:
- Add missing validation of the server_name_indication option and test for
its explicit use.
- Elliptic curve selection in server mode now properly selects a curve
suggested by the client, if possible.
- The server did not indicate support for secure renegotiation during TLS
extension handling.
- In the syntax tools application a bug was introduced which broke
reverting of local funs. This is now corrected (thanks to Anthony
Ramine)
- wx - Solved a problem which caused the debugger to crash when closing a
window. Fixed static linking on Mac.
- xmerl - Fixed a problem in the SAX-parser when the header of the next
document was appearing in the buffer when using the
xmerl_sax_parser:stream/2 function.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Mon, 27 Jan 2014 21:03:45 +0000 (22:03 +0100)]
libcdio: forcibly disable libcddb support
We don't have libcddb in Buildroot, and the detection handling in
configure uses pkg-config, so explicitly disable it so we don't
need to build host-pkgconf just to notice that it isn't available.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
projects / coffee / buildroot.git / log