Yann E. MORIN [Sun, 6 May 2018 11:57:51 +0000 (13:57 +0200)]
package/patch: fix xattr option
The name of the configure option is, and has always been,
--enable-xattr, not --enable-attr. Otherwise, configure
whines:
configure: WARNING: unrecognized options: --enable-attr
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some files of log4cplus are licensed under BSD-2-Clause as stated in
LICENSE file: "Each file of log4cplus source is licensed using either
two clause BSD license or Apache license 2.0."
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fabio Estevam [Sat, 5 May 2018 23:12:24 +0000 (20:12 -0300)]
configs/freescale_imx6ulevk: Remove target
Currently this target fails to build:
./scripts/dtc-version.sh: line 17: dtc: command not found
./scripts/dtc-version.sh: line 18: dtc: command not found
*** Your dtc is too old, please upgrade to dtc 1.4 or newer
Even though the fix for this build failure is easy, I prefer to
maintain only imx6ulevk_defconfig, which is a target for the
same board, but uses mainline kernel and U-Boot versions instead.
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/66561695 Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fabio Estevam [Sat, 5 May 2018 23:12:23 +0000 (20:12 -0300)]
configs/freescale_imx31_3stack: Remove target
Currently this target fails to build:
arch/arm/mach-imx/built-in.o: In function `init_mmdc_lpddr2_settings':
platform-spi_imx.c:(.text+0x8f18): undefined reference to `imx6sll_lpddr2_freq_change'
arch/arm/mach-imx/built-in.o: In function `imx6ul_cpuidle_init':
platform-spi_imx.c:(.init.text+0x195c): undefined reference to `mx6ull_lpm_wfi_end'
platform-spi_imx.c:(.init.text+0x1960): undefined reference to `mx6ull_lpm_wfi_start'
platform-spi_imx.c:(.init.text+0x1964): undefined reference to `imx6ull_low_power_idle'
arch/arm/mach-imx/built-in.o: In function `imx6sl_init_late':
platform-spi_imx.c:(.init.text+0x56f0): undefined reference to `imx6sll_cpuidle_init'
Makefile:969: recipe for target 'vmlinux' failed
NXP 4.9 kernel does not properly support mx31, so better remove this target.
mx31_3stack board is currently supported in U-Boot and kernel mainline,
so if someone is interested on this board, then a target can be introduced
later which uses these mainline components.
Currently I do not have access to this board, so remove it its defconfig
for now.
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/66561688 Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fabio Estevam [Sat, 5 May 2018 23:12:22 +0000 (20:12 -0300)]
configs/freescale_imx6sololiteevk: Remove target
Currently this target fails to build:
Error: No BOOT_FROM tag in board/freescale/mx6slevk/imximage.cfg.cfgtmp
arch/arm/imx-common/Makefile:91: recipe for target 'u-boot-dtb.imx' failed
This problem has been already solved in upstream U-Boot, but not
on NXP version of U-Boot.
To avoid the maintainance burden of keeping two defconfigs for the
same board, remove freescale_imx6sololiteevk_defconfig in favor
of imx6slevk_defconfig, which uses U-Boot and kernel mainline.
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/66561693 Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Carlos Santos [Sat, 5 May 2018 02:34:28 +0000 (23:34 -0300)]
nasm: Fix compilation with GCC 8
host-nasm fails to compile with GCC 8:
In file included from ./include/nasm.h:46,
from asm/nasm.c:47:
./include/nasmlib.h:194:1: error: ‘pure’ attribute on function returning ‘void’ [-Werror=attributes]
void pure_func seg_init(void);
^~~~
Pull a patch from upstream that removes the stale declaration of
seg_init, which was eliminated a long time ago.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Stefan Sørensen [Thu, 3 May 2018 11:46:59 +0000 (13:46 +0200)]
dropbear: Fix host key loading with 521 bit ecdsa keys
Dropbear 2018.76 changed the default ecdsa host key size form 521 to 256
bits, but this breaks systems with an existing 521 bit key, blocking ssh
logins.
Apply the upstream fix from https://secure.ucc.asn.au/hg/dropbear/rev/0dc3103a5900 :
Only advertise a single server ecdsa key when -R (generate as required) is
specified. Fixes -R now that default ecdsa key size has changed.
[Peter: apply-patches.sh does not like suffix-less filename, so include
patch in Buildroot] Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Romain Naour [Fri, 19 Jan 2018 10:15:07 +0000 (11:15 +0100)]
package/mksh: add /bin/mksh to /etc/shells
When mksh is selected, /bin/mksh is not added to /etc/shells
(see man shells). So, login tools like dropbear reject the ssh
connections for users using mksh as shell in /etc/passwd.
buildroot authpriv.warn dropbear[853]: User 'kubu' has invalid shell, rejected
Signed-off-by: Romain Naour <romain.naour@smile.fr> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Romain Naour [Fri, 19 Jan 2018 10:15:06 +0000 (11:15 +0100)]
package/zsh: add /bin/zsh to /etc/shells
When zsh is selected, /bin/zsh is not added to /etc/shells
(see man shells). So, login tools like dropbear reject the ssh
connections for users using zsh as shell in /etc/passwd.
buildroot authpriv.warn dropbear[853]: User 'kubu' has invalid shell, rejected
Signed-off-by: Romain Naour <romain.naour@smile.fr> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Romain Naour [Fri, 19 Jan 2018 10:15:05 +0000 (11:15 +0100)]
package/tmux: add /usr/bin/tmux to /etc/shells
When tmux is selected, /usr/bin/tmux is not added to /etc/shells
(see man shells). So, login tools like dropbear reject the ssh
connections for users using tmux as shell in /etc/passwd.
buildroot authpriv.warn dropbear[853]: User 'kubu' has invalid shell, rejected
Signed-off-by: Romain Naour <romain.naour@smile.fr> Cc: "Yann E. MORIN" <yann.morin.1998@free.fr> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Romain Naour [Fri, 19 Jan 2018 10:15:04 +0000 (11:15 +0100)]
package/screen: add /usr/bin/screen to /etc/shells
When screen is selected, /usr/bin/screen is not added to /etc/shells
(see man shells). So, login tools like dropbear reject the ssh
connections for users using screen as shell in /etc/passwd.
buildroot authpriv.warn dropbear[853]: User 'kubu' has invalid shell, rejected
While at it, drop an empty line between an existing hook definition
and its registration, to be consistent with the coding style used in
the rest of Buildroot.
Signed-off-by: Romain Naour <romain.naour@smile.fr> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Romain Naour [Fri, 19 Jan 2018 10:15:03 +0000 (11:15 +0100)]
package/dash: add /etc/dash to /etc/shells
When dash is selected, /bin/dash is not added to /etc/shells
(see man shells). So, login tools like dropbear reject the ssh
connections for users using dash as shell in /etc/passwd.
buildroot authpriv.warn dropbear[853]: User 'kubu' has invalid shell, rejected
Signed-off-by: Romain Naour <romain.naour@smile.fr> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Romain Naour [Fri, 19 Jan 2018 10:15:02 +0000 (11:15 +0100)]
package/busybox: add /bin/{a, hu}sh to /etc/shells
When ash (busybox) is selected, /bin/{a,hu}sh is not added to /etc/shells
(see man shells). So, login tools like dropbear reject the ssh
connections for users using {a,hu}sh as shell in /etc/passwd.
buildroot authpriv.warn dropbear[853]: User 'kubu' has invalid shell, rejected
Signed-off-by: Romain Naour <romain.naour@smile.fr> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Yann E. MORIN [Thu, 3 May 2018 20:17:57 +0000 (22:17 +0200)]
core/pkg-infra: don't display "foo Downloading" when there's no source
Commit ea55e1323 (core/pkg-infra: don't enforce site-method for extra
downloads) forgot to account for those packages that have nothing to
download, like the skeleton, or like virtual packages...
The side effect is that the message "foo Downloading" is thus
displayed when it should not be.
Fix that.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, GST1_PLUGINS_BAD_LICENSE_FILES starts out set to
both the GPL COPYING file and the LGPL COPYING.LIB file, but
the GST1_PLUGINS_BAD_LICENSE handling only claims LGPL, and
then intelligently adds GPL if needed. This change moves the
GPL file addition to the same conditional clause so that the
GPL file is included in the legal-info location only if GPL
code is actually used.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Chris Lesiak [Mon, 30 Apr 2018 17:14:11 +0000 (12:14 -0500)]
Makefile: Update mtime of $(TARGET_DIR)/usr in target-finalize
The systemd ConditionNeedsUpdate option is useful when offline updates
of the vendor operating system resources in /usr require updating of
/etc or /var on the next following boot.
Two examples of services making use of this option are
systemd-hwdb-update.service and systemd-sysusers.service.
ConditionNeedsUpdate=/etc will be true if the mtime of /etc/.updated
is older than the mtime of /usr. After services conditional on
ConditionNeedsUpdate have run, systemd-update-done.service will
synch the mtime of /usr to /etc/.updated so that the condition will
be false on subsequent boots.
For systems with writable /usr partitions where updates are done to
the running system, the update program will touch /usr as a final step.
But with Buildroot, where updates are often done by dumping a new
image onto the device, and where /usr is on a filesystem mounted
read-only, touching /usr as part of the update process is not practical.
Instead, it should be done a build time.
For testers, please note that systemd-update-done in v234 added a
regression where the mtime of /etc/.updated is set to the current time
instead of the mtime or /usr. This will be fixed in v239.
For more details, see:
http://0pointer.de/public/systemd-man/systemd.unit.html
http://0pointer.de/public/systemd-man/systemd-update-done.service.html
Signed-off-by: Chris Lesiak <chris.lesiak@licor.com> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Stefan Becker [Wed, 2 May 2018 09:05:08 +0000 (12:05 +0300)]
host-mkpasswd: fix crash on Fedora 28 build host
crypt() is an optional glibc feature. Some distros, like Fedora 28, are
phasing it out to be replaced with libxcrypt [1]. Unfortunately this
change is only ABI compatible, not source code compatible, i.e. the code
will compile with warnings about undefined crypt(), but the resulting
binary will crash.
Follow the guidance in the Fedora bug and include crypt.h when
_XOPEN_CRYPT is not defined.
Signed-off-by: Stefan Becker <chemobejk@gmail.com> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libgsasl needs wctomb, if not available it will define it to
rpl_wctomb. However, as there is no rpl_wctomb implementation, the .so
ends up with an undefined reference to wctomb.
This will cause linker errors for packages trying to use it such as
msmtp:
/home/peko/autobuild/instance-0/output/host/bin/../microblazeel-buildroot-linux-uclibc/sysroot/usr//lib/libgsasl.so:
undefined reference to `wctomb'
Stefan Becker [Wed, 2 May 2018 11:14:48 +0000 (14:14 +0300)]
package/python: add upstream GCC8 build fix
Fedora 28 switched to GCC8.
Signed-off-by: Stefan Becker <chemobejk@gmail.com>
[Thomas: fixup location of SoB in the patch.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
core/pkg-infra: don't enforce site-method for extra downloads
The site method only ever applies to the main download, while extra
downloads are always to be fetched with wget.
However, the site method is prepended to the URL from within the
DOWNLOAD macro (well, a variable evaluated in the DOWNLOAD macro),
which is called for each download of a package, thus effectively
prepending the site method to all downloads, even the extra ones (and
the patches).
We fix that by prepending the site method from within the
generic-package infra, so that it only applies to the main download.
For that, we move the main _SOURCE out of the foreach loop, so that
we can prepend the site-method to it, without impacting the other
downloads.
Reported-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Luca Ceresoli <luca@lucaceresoli.net> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net> Tested-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
core/pkg-infra: set no-check-hash only for main download
Currently, when the main download if from an SCM, we exclude all
downloads from being hash-checked, on the assumption that we don't
have hashes for downloads from an SCM.
However, the exclusion is computed on the DOWNLOAD macro, which is
called for each download of a package, thus effectively disabling
hash checks for extra downloads, even though those are only ever
download with wget.
What we really wanted to do, in fact, was to exclude just the main
download.
We fix that by appending the main source file to the global list of
excluded files, from within the generic-package infra itself.
Reported-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Luca Ceresoli <luca@lucaceresoli.net> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net> Tested-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
package/mesa3d: add missing elfutils dependency with R600 and RadeonSI driver
Commit "add dependency on elfutils for R600 with LLVM" [1] select
elfutils package at Kconfig level without adding it the make dependency.
Enabling r600 support lead to a build issue when building from
scratch with "make mesa3d".
Fixes:
checking for RADEON... yes
configure: error: r600 requires libelf when using llvm
elfutils dependency is needed by r600 with llvm support and radeonSI.
Fixes:
checking for RADEON... yes
checking for AMDGPU... yes
configure: error: radeonsi requires libelf when using llvm
Add a new BR2_PACKAGE_MESA3D_NEEDS_ELFUTILS hidden Config.in boolean
selected by R600 and RadeonSI at Kconfig level.
When selected, BR2_PACKAGE_MESA3D_NEEDS_ELFUTILS add elfutils dependency
at make level.
Peter Korsgaard [Tue, 1 May 2018 19:41:56 +0000 (21:41 +0200)]
skeleton: add /dev/fd, /dev/std{in, out, err} symlinks for static /dev on readonly rootfs
Some applications, e.g. bashs process subsitution feature, rely on the
convention of `/dev/fd` being a symbolic link to `/proc/self/fd`.
When a static /dev is used on a readonly rootfs then the runtime ln
invocations in the inittab will fail, so we need to add the symlinks at
build time. Makedevs doesn't support creating symlinks, so instead add the
symlinks to the default skeleton.
For non-static /dev setups, the kernel will mount devtmpfs which shadows the
/dev of the rootfs, but then the runtime ln invocations in inittab will
create the symlinks.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
sysvinit: add /dev/std{in, out, err} symlinks to inittab
Some applications, e.g. bashs process subsitution feature, rely on the
convention of `/dev/fd` being a symbolic link to `/proc/self/fd`.
This symbolic link and his companions `/dev/std*` are created by (e)udev [1],
but not by mdev, resulting in the following error when using the following
expression:
```
bash: /dev/fd/62: No such file or directory
```
For the sake of simplicity, lets fix this by creating the symlinks in inittab.
It is only really needed if eudev isn't used, but it doesn't really hurt to
create them even if eudev will recreate them afterwards.
Note, that we do not create the symlink `/dev/core` as `/proc/kcore` is
not available on all platforms, e.g. ARM, and the feature is not much
appreciated [2].
busybox: add /dev/std{in, out, err} symlinks to inittab
Some applications, e.g. bashs process subsitution feature, rely on the
convention of `/dev/fd` being a symbolic link to `/proc/self/fd`.
This symbolic link and his companions `/dev/std*` are created by (e)udev [1],
but not by mdev, resulting in the following error when using the following
expression:
```
bash: /dev/fd/62: No such file or directory
```
For the sake of simplicity, lets fix this by creating the symlinks in inittab.
It is only really needed if eudev isn't used, but it doesn't really hurt to
create them even if eudev will recreate them afterwards.
Note, that we do not create the symlink `/dev/core` as `/proc/kcore` is
not available on all platforms, e.g. ARM, and the feature is not much
appreciated [2].
projects / coffee / buildroot.git / log