Carlos Santos [Sat, 17 Jun 2017 18:43:06 +0000 (15:43 -0300)]
util-linux: bump to version 2.30
- Update the "basic set" description to include fincore, which is built
by default, and remove tailf, which was removed in this version.
- Add configuration options for the new utilities "chmem" and "lsmem".
- Remove patch already applied upstream.
- Drop autoreconf, since the patch on term-utils/Makemodule.am is gone.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Alexander Dahl [Sat, 17 Jun 2017 07:27:26 +0000 (09:27 +0200)]
dropwatch: bump to master and fix site
The tool was hosted at fedorahosted.org which was shut down in early
2017. According to a private conversation with the upstream maintainer,
the new home for this tool is on infradead.org so far. So the SITE was
adapted accordingly.
Additionally the version was bumped from 1.4 to current master. This
allows to drop one build patch. The other patches were recreated with
Git.
Cc: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Alexander Dahl <post@lespocky.de> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bernd Kuhls [Sat, 17 Jun 2017 07:19:57 +0000 (09:19 +0200)]
package/mesa3d: always pass --with-platforms
If --with-platforms is not used mesa3d defaults to x11:
https://cgit.freedesktop.org/mesa/mesa/tree/configure.ac?h=17.1#n1641
https://cgit.freedesktop.org/mesa/mesa/tree/configure.ac?h=17.1#n1659
This will break configure when x11 is not needed because the defconfig
has no mesa3d drivers enabled. To solve the problem we always pass
--with-platforms, even with empty values and also for non-egl builds.
Bernd Kuhls [Sat, 17 Jun 2017 07:19:56 +0000 (09:19 +0200)]
package/mesa3d: rename MESA3D_EGL_PLATFORMS to MESA3D_PLATFORMS
No code changes, this patch prepares for updates to platform handling
after upstream deprecated --with-egl-platforms in favour of
--with-platforms
https://cgit.freedesktop.org/mesa/mesa/commit/?h=17.1&id=7748c3f5eb1d98ca97d2cf6e516ff54a5d75130a
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Peter Korsgaard [Fri, 16 Jun 2017 21:24:04 +0000 (23:24 +0200)]
pandaboard_defconfig: bump u-boot to 2017.05 to fix build with gcc 6
The recent change to default to gcc 6 for the internal toolchain broke this
defconfig as the u-boot doesn't contain commit 9b2c282b34 (compiler*.h: sync
include/linux/compiler*.h with Linux 4.5-rc6) which was added during the
2016.03 cycle.
Fix the build by bumping u-boot to 2017.05.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Fri, 16 Jun 2017 14:41:43 +0000 (16:41 +0200)]
openblocks_a6_defconfig: bump to linux-4.11.5 to fix build with gcc 6
The recent change to default to gcc 6 for the internal toolchain broke this
defconfig, as the kernel doesn't contain commit cb984d101b (compiler-gcc:
integrate the various compiler-gcc[345].h files) which was added during the
4.2 cycle.
Fix the build by bumping the kernel to 4.11.5.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Luca Ceresoli [Wed, 14 Jun 2017 11:22:27 +0000 (13:22 +0200)]
arm-trusted-firmware: cleanup make target handling
ARM_TRUSTED_FIRMWARE_MAKE_TARGET is expanded, but it's never assigned
so it is always empty. On the other hand the make targets are defined
in ARM_TRUSTED_FIRMWARE_MAKE_OPTS, which should contain options, not
targets.
Clean it all up by moving the targets in the proper place, replacing
the useless $(ARM_TRUSTED_FIRMWARE_MAKE_TARGET).
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yegor Yefremov [Thu, 15 Jun 2017 08:03:19 +0000 (10:03 +0200)]
python-setuptools: bump to version 36.0.1
Recent setuptools versions require bootstrap.py to be invoked
before the standard setup process. So create such pre configure
hooks for both host and target versions.
Change download location to GitHub because setuptools doesn't
provide *.tar.gz any longer.
Fix legal info. setuptools is now licensed under MIT licence.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Jörg Krause [Thu, 15 Jun 2017 09:40:00 +0000 (11:40 +0200)]
boost: module context affected by GCC bug 64735
Building boosts module context is affected by GCC bug 64735 [1]:
```
./boost/context/execution_context_v2.hpp:298:31: error: 'exception_ptr' is not a member of 'std'
auto p = std::make_tuple( std::exception_ptr{}, std::move( data) );
```
This is because `exception_ptr` from libstdc++ is not available for
architectures not supporting always lock-free atomic ints.
Luca Ceresoli [Thu, 15 Jun 2017 16:18:17 +0000 (18:18 +0200)]
zynq_zc706: bump to U-Boot xilinx-v2017.1 (fix build)
The Zynq ZC706 defconfig does not build anymore since commit 6cda724efb20682bb98e6d738e5f7c909415ae07 ("package/gcc: switch to gcc
6.x as the default"). Fix by upgrading to the latest U-Boot version,
xilinx-v2017.1, based on mainline v2017.01.
Fixes:
In file included from include/linux/compiler.h:54:0,
from include/linux/bitops.h:5,
from ./include/common.h:20:
include/linux/compiler-gcc.h:114:30: fatal error: linux/compiler-gcc6.h: No such file or directory
#include gcc_header(__GNUC__)
^
compilation terminated.
[Build-tested only] Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Luca Ceresoli [Thu, 15 Jun 2017 16:18:16 +0000 (18:18 +0200)]
zynq_microzed: bump to U-Boot xilinx-v2017.1 (fix build)
The Zynq MicroZed defconfig does not build anymore since commit 6cda724efb20682bb98e6d738e5f7c909415ae07 ("package/gcc: switch to gcc
6.x as the default"). Fix by upgrading to the latest U-Boot version,
xilinx-v2017.1, based on mainline v2017.01.
Fixes:
In file included from include/linux/compiler.h:54:0,
from include/linux/bitops.h:5,
from ./include/common.h:20:
include/linux/compiler-gcc.h:114:30: fatal error: linux/compiler-gcc6.h: No such file or directory
#include gcc_header(__GNUC__)
^
compilation terminated.
[Build-tested only] Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Luca Ceresoli [Thu, 15 Jun 2017 16:18:15 +0000 (18:18 +0200)]
zynq_zed: bump to U-Boot xilinx-v2017.1 (fix build)
The Zynq ZedBoard defconfig does not build anymore since commit 6cda724efb20682bb98e6d738e5f7c909415ae07 ("package/gcc: switch to gcc
6.x as the default"). Fix by upgrading to the latest U-Boot version,
xilinx-v2017.1, based on mainline v2017.01.
Fixes:
In file included from include/linux/compiler.h:54:0,
from include/linux/bitops.h:5,
from ./include/common.h:20:
include/linux/compiler-gcc.h:114:30: fatal error: linux/compiler-gcc6.h: No such file or directory
#include gcc_header(__GNUC__)
^
compilation terminated.
[Build- and run-tested] Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
printvars: remove "Nothing to be done for 'printvars'."
When calling 'make printvars' without -s, it ends with
"Nothing to be done for 'printvars'." That's because the rule only
contains $(info ...) calls and no actual shell commands to execute.
To avoid this, make sure there is a shell command by adding :.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Quite a few targets in the top-level Makefile were missing the .PHONY
marking. Now that the .PHONY declarations are next to the definition
of the targets, they are much easier to find.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Makefile: declare targets PHONY where they are defined
Currently, a lot of targets are declared PHONY together in the middle
of the Makefile. This has two important shortcomings:
- it is more difficult to see if a target is missing from PHONY;
- it is currently inside the ifeq ($(BR2_HAVE_DOT_CONFIG),y) condition,
but some of these targets are also defined when there is no .config;
in that case, these targets are not declared as PHONY.
Both issues can easily be solved by putting the PHONY declaration next
to the definition of the target.
The noconfig_targets are also all declared PHONY together; however,
for these we anyway have to keep the noconfig_targets variable
up-to-date, and that PHONY declaration is outside all conditions, so
there is no benefit of splitting them.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Thu, 15 Jun 2017 09:25:26 +0000 (11:25 +0200)]
configs/pc_x86_64_{bios,efi}_defconfig: use custom linux config
Reusing the qemu x86-64 linux config isn't very obvious, so these defconfigs
aren't taken into consideration when the qemu defconfigs are updated,
breaking the build.
Instead use a custom linux config for the pc defconfigs. With this, we also
can get rid of the fragment file containing the delta fra the qemu config.
Created by linux-update-defconfig (after turning of the fragment file).
Also drop the linux kernel version number from the file name as it just
causes extra noise whenever the kernel is bumped.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Wed, 14 Jun 2017 21:36:04 +0000 (23:36 +0200)]
configs/pc_x86_64_{bios, efi}_defconfig: unbreak after qemu bump to linux-4.11
The pc_x86_64 defconfigs reuse the linux configuration from qemu_x86_64, but
they weren't adjusted when this was updated to use linux-4.11 in 28d97609b25
(configs/qemu: bump to the latest kernel version), breaking the build.
Fix it by also moving them to linux-4.11.x.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Baruch Siach [Wed, 14 Jun 2017 18:18:34 +0000 (21:18 +0300)]
gnutls: security bump to version 3.5.13
Fixes CVE-2017-7507: decoding a status request TLS extension that has a
non-empty responder IDs list could lead to a crash due to a null pointer
dereference.
Jagan Teki [Mon, 12 Jun 2017 18:21:41 +0000 (23:51 +0530)]
board: Add support for Engicam i.CoreM6 Quad/Dual boards
Add initial support for Engicam i.CoreM6 Quad/Dual board
with below features:
- U-Boot 2017.05
- Linux 4.11
- Default packages from buildroot
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Romain Naour [Mon, 5 Jun 2017 20:46:48 +0000 (22:46 +0200)]
package/gdb: add support for gdb 8.0
Add a dependency on gcc >= 4.8 since gdb needs a C++11 compiler.
Remove included patch since 7.12.1:
0001-Remove-const-in-xtensa-linux-nat.c-fetch_gregs.patch
https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=commit;h=d274ecf4ddf76768af57e27f654b9ce6784b391c
Rebase remaining patches:
0002-ppc-ptrace-Define-pt_regs-uapi_pt_regs-on-GLIBC-syst.patch
0003-sh-ptrace-Define-pt_-dsp-regs-uapi_pt_-dsp-regs-on-G.patch
See https://sourceware.org/ml/gdb-announce/2017/msg00003.html
Signed-off-by: Romain Naour <romain.naour@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a small patch to gdb that fixes the build of gdbserver
on m68k/coldfire:
../nat/linux-ptrace.c: In function 'linux_fork_to_function':
../nat/linux-ptrace.c:282:19: warning: implicit declaration of function 'clone' [-Wimplicit-function-declaration]
child_pid = clone (function, child_stack + STACK_SIZE,
^
../nat/linux-ptrace.c:283:5: error: 'CLONE_VM' undeclared (first use in this function)
CLONE_VM | SIGCHLD, child_stack + STACK_SIZE * 2);
^
../nat/linux-ptrace.c:283:5: note: each undeclared identifier is reported only once for each function it appears in
Thanks to Waldemar for pointing out the patch fixing this issue.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
Changes since v2:
- None
Changes since v1:
- New patch in the series
gdbserver's code looks at both UCLIBC_USE_MMU *and* UCLIBC_HAS_MMU to
decide whether to enable the no-MMU code. So far, on noMMU platforms,
UCLIBC_HAS_MMU was still set to 'y'. This commit adjusts this, which is
a step forward in getting gdbserver to build on m68k/coldfire.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
Changes since v2:
- None
Changes since v1:
- New patch in the series
gcc: add patch to support musl on SuperH in gcc 5.x
Building a toolchain for SuperH/musl works, but the toolchain generate
bogus binaries, because the path to the program interpreter is not
known (and therefore is /dev/null).
This commit backports a patch from gcc 6.x to make SuperH support with
musl work properly.
The patch is not needed in gcc >= 6.x because the musl support is
upstream. The patch is not needed for gcc 4.9 because we had a
different musl support patch that had support for all architectures in
one patch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
Changes since v2:
- None
Changes since v1:
- New patch in the series
gdb: add patches to fix musl build on ppc(64)(le) and sh
This commit small patches to gdb that fix redefined structures build
problems that occur when building on PowerPC, PowerPC64, PowerPC64le and
SuperH with the musl C library.
The PowerPC(64)(le) patch was taken from the Yocto Project, the SuperH
patch was inspired from the PowerPC patch. The issue has also been
reported upstream to the musl developers:
http://www.openwall.com/lists/musl/2017/06/03/1
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
Changes since v2:
- None
Changes since v1:
- None
Neither gdb nor gdbserver have support for ARM noMMU and OpenRISC, so
let's disable gdb on those architectures.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
Changes since v2:
- Fixed BR2_openrisc to BR2_or1k in Config.in.host
Changes since v1:
- Fixed BR2_openrisc to BR2_or1k
Before adding more architecture dependencies to gdb, let's introduce a
BR2_PACKAGE_GDB_ARCH_SUPPORTS, to avoid duplicating this list of
dependencies between the Config.in comment and the main Config.in
option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
Changes since v2:
- None
Changes since v1:
- None
Romain Naour [Sun, 11 Jun 2017 13:13:17 +0000 (15:13 +0200)]
package/lcdproc: override libpng-config path
Like for freetype-config, override libpng-config path otherwise
the one from the host system may be used when installed.
Make sure that the one from STAGING_DIR is used.
configure:7480: checking for libpng-config
configure:7498: found /usr/bin/libpng-config
configure:7510: result: /usr/bin/libpng-config
configure:7529: checking whether libpng is present and sane
[...]
nios2-linux-gnu-gcc: ERROR: unsafe header/library path used in cross-compilation: '-I/usr/include/libpng12'
Romain Naour [Sun, 11 Jun 2017 13:13:16 +0000 (15:13 +0200)]
package/lcdproc: override freetype-config path
freetype-config from the host system may be used when installed.
Make sure that the one from STAGING_DIR is used.
checking if freetype support has been enabled... yes
checking for freetype-config... /usr/bin/freetype-config
checking for FreeType -- version >= 7.0.1... cross compiling; assuming OK... yes
Jörg Krause [Thu, 8 Jun 2017 07:03:44 +0000 (09:03 +0200)]
intltool: add patch to fix compatibility with Perl 5.26
When Perl 5.26 is installed on the host, building some packages like
avahi fail, because of intltool-update:
```
Unescaped left brace in regex is illegal here in regex; marked by <-- HERE in m/^(.*)\${ <-- HERE ?([A-Z_]+)}?(.*)$/ at $BUILDROOT/host/usr/bin/intltool-update line 1065.
```
Apparently, this has been a warning before Perl 5.26, but now it is an
error.
Thomas Petazzoni [Sun, 11 Jun 2017 13:21:30 +0000 (15:21 +0200)]
syslinux: add missing dependency on host-util-linux
If util-linux is not installed system-wide on the host, the build
fails with:
/usr/bin/gcc -Wp,-MT,isohybrid.o,-MMD,./.isohybrid.o.d -O2 -I/home/thomas/projets/buildroot/output/host/usr/include -W -Wall -Wstrict-prototypes -Os -fomit-frame-pointer -D_FILE_OFFSET_BITS=64 -I/home/thomas/projets/buildroot/output/build/syslinux-6.03/utils -c -o isohybrid.o /home/thomas/projets/buildroot/output/build/syslinux-6.03/utils/isohybrid.c
/home/thomas/projets/buildroot/output/build/syslinux-6.03/utils/isohybrid.c:40:23: fatal error: uuid/uuid.h: No such file or directory
#include <uuid/uuid.h>
^
compilation terminated.
Therefore, this commit adds a dependency on host-util-linux, which
will ensure that libuuid is available. The resulting isohybrid tool is
really installed, and linked with libuuid:
$ readelf -d output/host/usr/bin/isohybrid
Dynamic section at offset 0x3e00 contains 26 entries:
Tag Type Name/Value
0x0000000000000001 (NEEDED) Shared library: [libuuid.so.1]
0x0000000000000001 (NEEDED) Shared library: [libc.so.6]
0x000000000000000f (RPATH) Library rpath: [/home/thomas/projets/buildroot/output/host/usr/lib]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Andrey Smirnov [Fri, 2 Jun 2017 23:56:46 +0000 (16:56 -0700)]
package/python-ipython-genutils: New package
Add 'ipython_genutils'[1] package to Buildroot. Needed by 'traitlets'.
[1] https://pypi.python.org/pypi/ipython_genutils
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas: take into account comments made by Yegor:
- fix alphabetic ordering in the DEVELOPERS file
- fix comment in hash file
- add license file] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Andrey Smirnov [Fri, 2 Jun 2017 23:56:45 +0000 (16:56 -0700)]
package/python-simplegeneric: Switch setup type to 'setuptools'
Specifying setup type to be 'distutils' results in this package being
installed as .egg, a zipped file, which inadvertantly makes
'simplegeneric' to be dependent on BR2_PACKAGE_PYTHON*_ZLIB. In order
to avoid that specify setup type to be 'setuptools' which makes use of
--single-version-externally-managed and therefore installs the package
as .pyc and a .egg-info folder.
projects / coffee / buildroot.git / log